Turbine

Vivaldi EOC 25 DIN 6388/B

Condition: used, Storage location: Nattheim Redpfjvvi E Nsx Ahvop

Condition: excellent (used), C.N.C. WORKING CENTER with 3 axes (X-Y-Z) - Goose-neck type Movable panel (workpiece), static working head, Horizontal position of the panel (workpiece) Numerical Control with Software BiesseWorks (Separate electric and command cabinet) Safety cabin (enclosure) of the working head, Front emergency carpets In-feeding working table (panel support) No. 2 Workpieces fixing clamps (for the panels introduction in the working area) Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 90 x 70 x 8 (ca.) Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1300 x 60 (ca.) Total installed power (Kw) 24 BOTTOM WORKING UNITS: Independent vertical boring spindles (No.) 29 Independent horizontal boring spindles (No.) 10 (8 X + 2 Y) Circular Grooving Saw (on X axis) dia. (mm) 160 (1 x kw 3,5 ca.) Redpfxowb Alls Ahvep Vertical electro-spindle (No.) ISO 30 (1 x kw 4,5 ca.) TOP WORKING UNITS: Indipendent vertical drilling spindles (No.) 29 Indipendent horizontal drilling spindles (No.) 10 (8 X + 2 Y) Circular Grooving Saw (on X axis) dia. (mm) 160 (1 x kw 3,5 ca.) Vertical electro-spindle (No.) ISO 30 (1 x kw 4,5 ca.)

Condition: used, Year of construction: 2009, functionality: fully functional, A Scholz glass autoclave with dimensions of 9000 mm length x 3000 mm diameter is an industrial hot-air autoclave designed for the production of high-quality laminated safety glass and is typically a used unit from a specific year of manufacture. Rjdpewintkjfx Ahvsp General Description and Features: This large-capacity industrial autoclave is primarily utilized in the architectural glass sector for the lamination process, in which layers of glass are bonded with interlayer polymer film materials (such as PVB or SentryGlas) under precisely controlled high temperature and pressure conditions. Key features and general specifications: - Dimensions: The inner chamber measures approximately 9000 mm in length (9 meters) and 3000 mm in diameter (3 meters). - Heating System: Equipped with an electric heating system that ensures consistent temperature distribution throughout the process. - Control System: Features a control panel, typically a touchscreen operator interface, along with digital temperature and pressure controllers (Honeywell), allowing accurate process monitoring and control. - Door Mechanism: Incorporates a rapid-opening closure system designed for industrial efficiency and workplace safety. - Construction: Fabricated from premium-grade materials, most likely carbon steel for the pressure vessel, with internal components engineered to withstand the demands of glass lamination operations. - Applications: Designed primarily for laminated glass, Scholz autoclaves can also be configured for other thermal processing tasks and composite material production—such as fiber-reinforced plastics—depending on customer requirements. Technical Data: Exact operating parameters (pressure and temperature ranges) for units of these dimensions may vary, as Maschinenbau Scholz manufactures each autoclave to suit individual client demands. - Operating Pressure: While typical Scholz industrial autoclaves are rated up to 210 bar, applications in glass lamination generally require pressures between 0.1 MPa and 1.6 MPa (approximately 1 to 16 bar). - Operating Temperature: The glass lamination process typically operates from ambient temperature up to about 150°C, although Scholz autoclaves are capable of handling temperatures up to 650°C for various processes. - Electrical Specifications (example for a used model): - Rated current: 1100A - Service voltage: 400V - Control voltage: 24V, 230V / 50Hz These specifications and details refer to Scholz hot-air autoclaves for glass production, covering dimensions, heating systems, and control technology.

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Rodpfx Aovvi Rfshvop

Condition: new, Year of construction: 2024, table length 2000 mm table width 1000 mm stroke height 400 - 1010 mm weight max. in kg 300 kg Redpfx Aev Htkdjhvsp weight of the machine ca. 220 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, power: 2 kW (2.72 HP), Sales: SGT Strahlmaschinen AG, Switzerland; Turbine type: 2 x TC 260 D; 2 x 4 kW Redowbhkaopfx Ahvsp

Condition: good (used), Tool holder VDI 30 Rsdpfx Aoww Hlujhvep

Condition: used, machine/vehicle number: 006639, X axis working area: 2600 mm Y axis working area: 900 mm Total number of drilling spindles: 22 Rodpfxswuz Hhe Ahvjp

Condition: new, Year of construction: 2025, Dosing ranges: 1 ml - 38 ml 2 ml – 100 ml 5 ml – 250 ml 20 ml – 680 ml 50 ml – 1,500 ml Volumetric filling Under-surface filling possible Special "Anti-Drop" device Adjustable filling nozzle Pump and filling nozzle made of stainless steel AISI 316 L Automatic cap application Stepless torque adjustment of the screwing system Closing system for plastic caps Touch display control The products can come from the food, cosmetics, pet food, oils, chemicals and other industries (always subject to technical evaluation). The pouches are manually hung into a special rail feed system. Then the machine transports the empty pouches into the star. There, the pouches are volumetrically filled, the caps are automatically applied and then automatically closed. The torque is adjustable. The machine is compact and very versatile. Also available as a semi-automatic monoblock. Rodpfx Aowpr Uxohvsp

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts the unique panel): - Minimum length of the workpiece: mm 500 - Maximum length of the workpiece: mm 2700 - Minimum width of the workpiece: mm 300 ca. - Maximum width of the workpiece: mm 700 - Thickness (min./max) of the workpiece: mm 10 / 30 ca. - Max feeding speed: m/min 50 - Total installed power Kw 43.2 Along with the following groups: POS. 1 Milling unit for execution of bottom slots/grooves (Kw 7,4) max. blade diameter mm 300 Redpfsu Tqb Ujx Ahvjp POS. 2 Lower scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 3 Upper scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 4 Lower main blade (sawing) unit (Kw 7.4) max. diameter mm 350