Lathe

Albus / Pfohl AHK 140

Year of construction: 1980, condition: good (used), A used, very well-maintained cycle-controlled lathe from Weisser Heilbronn with a SIEMENS control system. Distance between centers 2000 mm Center height 295 mm Swinging diameter over bed 600 mm Swinging diameter over cross slide 260 mm Swinging diameter in the crotch 800 mm Iedpfsgyy I Aex Afusba Total length of the crotch 375 mm Bed width 450 mm Travel of X-axis 350 mm Travel of Z-axis 1850 mm Spindle nose DIN 55022, size 8 Spindle speed, number 18, 14 – 1400 rpm Spindle bore 71.5 mm Diameter of front bearing 110 mm Feed range 0.01 – 40.95 mm/rev Rapid traverse 8 m/min DC drive 15 kW 400V 50Hz Max. permissible torque on the spindle 2500 Nm Tailstock quill 80 mm Quill stroke 250 mm Internal taper in quill MK 5 Length x width x height Machine weight 5500 kg Accessories: Tailstock Pneumatic three-jaw chuck with replaceable jaws, 315 mm Quick-change tool holder "MULTIFIX" in front of the center, size "C" Four-position turret behind the center Tool holder Coolant system Follow rest, pneumatically actuated Technical data and dimensions: Subject to change without notice. Video conference via WhatsApp possible after scheduling an appointment.

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min working direction: any work roll diameter: 120 mm barrel length: 150 mm Ibedpfjp E Eglsx Afuja backup rolls: backup block/chain

Condition: used, Year of construction: 1994, Used, excellent condition, top specification, extensive accessories with 3-axis control, pneumatic spindle change, electronic adjustment of the milling fence 99 memory programs, 15 change spindles, adjustable table insert Manufacturer: SCM Model: T150 Class Year of manufacture: 1994 Upgraded motor: 6 / 7.5 kW tilt range from -10° to +45° motor brake motor with 2 speeds, pole-changeable speed settings: 3250/5000/6500/10,000 rpm right and left rotation Table size: 2700 x 700 mm Milling spindle diameter: 15 x 30 mm / 1 x 40 mm Milling spindle clamping: HSK Quick-change spindle system: SK / HSK Table extension: 2 x 650 mm Extendable frame support Aluminium fence jaws Milling fence with fine adjustment Digital displays for milling fence – diameter – depth of cut – jaw offset Guard and pressure device Top control panel Ibsdpfsythdvjx Afuja Swiveling control panel - electric height adjustment - electric tilt adjustment - electric milling fence Positioning control for 3 axes: height/tilt/milling fence with 99 programs Digital displays for tilt angle – spindle height – fence depth Swivel-away fence device Socket for feed unit Original price approx. 40,000 – 45,000 EUR Extraction connection 120 x 120 mm Space requirement approx. 2700 x 1300 x 1800 mm Weight approx. 1073 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handover in the current condition as inspected, function tested, without overhaul, without warranty or guarantee.

Condition: used, Year of construction: 1988, Distance between centres 1200 mm Speed A) 70 - 380 U/min. turning speeds B) 380 - 2000 U/min weight 2,2 t +++++ Ibodpfok Sat Dex Afuoa Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2000, used CONDOR AC, partially overhauled Centre height: 165 mm Between centres: 750 mm Spindle bore: 40 mm Spindle speeds: 22–2,800 rpm, infinitely variable - Quick-change tool post size B - WEILER DZ-V digital readout - Hollow spindle stop - Fixed steady rest - 7 Multifix tool holders - Flat splash guard - Electrically interlocked chuck guard - Change gears and various soft jaws The machine is partially overhauled: - Bed slide: guideways re-coated and hand-scraped, gibs and lower guide strips adjusted - Cross slide measured and aligned on bed slide; cross slide dovetail guide newly scraped, gibs adjusted and scraped - Top slide newly scraped and gib matched - All measuring scales overhauled and cables replaced The machine is located in our showroom at 71334 Waiblingen-Beinstein and is immediately available. For details on equipment, please contact us. Ijdpsx E Um Nsfx Afueba

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet Ijdpowrm Dtofx Afujba About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: new, Year of construction: 2025, Working width: 408 mm Planer block: Strip knife Number of knives: 3 Planing table length: 1640 mm Planing stop angle adjustable: yes Folding up the planing tables: manual Maximum thickness throughput of the thicknesser: 225 mm Thicknessing table height adjustment: handwheel Planing thickness display: scale Feed speed: 7 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: continuous Table rollers: no Motor power: 3 kW Iedpowfcqcefx Afujba Motor brake: yes, automatic Extraction connection: 100 mm Machine length: 1660 mm Machine width: 870 mm Weight: 260 g

Condition: used, Technical details: x-travel: 600 mm y-travel: 300 mm z-travel: 360 mm range of revolution per miute: max horiz. 40- 2000 U/min spindle taper: vert. / horiz. SK 40/ SK40 range of revolution per miute: max zul. 40 - 2000 U/min feed:: 2-3600 mm/min quill travel: 80 mm Table dimensions: 810 x 420 mm total power requirement: 3 KVA machine weight approx.: 1300 kg dimension machine xH: 1,8 x 1,35 x 1,95 m Ibsdpfxou U E T Ie Afuoa Milling machine with shaping head joint length 32-80mm with 10 x double strokes, 24-285 strokes/min Heidenhain 3-axis displays *

Condition: used, turning diameter over bed 460 mm turning dia. over face-slide 256 mm turning length 1250 mm centre distance 1250 mm centre height 230 mm spindle bore 55 mm spindle turning speed range 35 - 1800 U/min weight of the machine ca. 2,7 t dimensions of machine L x W x H 2,75 x 1,20 x 1,42 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady Ibedjxwp Ebopfx Afuea

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Active Digital Readout Heidenhain, Excellent Condition, CE Compliant!!! Technical Data: - Year of manufacture: 1992, Machine no. 2203-8449 - Fixed angle table - Spindle speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel (X/Y/Z): 500/400/400 mm - Vertical milling head traverseable on column - Vertical and horizontal quill - SK40 taper - Vertical quill extendable by 90 mm - Hydraulic drawbar system - Approx. weight: 1600 kg Equipment and Accessories: - 3-axis active Heidenhain digital readout - Coolant system - Chip tray - Central electric lubrication Ibjdpsu Tuk Hjfx Afusa - Operating manual, spare parts drawings About the Machine: For sale is a Deckel FP4M Universal Milling Machine (Active) in very good condition. The machine has minimal backlash, and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. The machine features hydraulic tool clamping. The FP4M was only occasionally used in a state-run facility for training purposes. On this newer FP4 model, the feed rates are steplessly adjustable in all three axes, and each axis also features a rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input measurements that the machine will approach automatically. Oil change has been performed; mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.