Extraction system with press

Höcker Polytechnik

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical specifications: - Galvanized sheet steel construction - Space-saving thanks to compact design - Delivered ready for operation - ATEX - pressure shock resistance FSA tested - Low energy consumption with high performance thanks to clean air side high-performance fan with special impeller - Energy-saving motor of efficiency class IE4 - 4 large-capacity collection containers with insert bags - High safety and long service life due to certified filter media with test certificate - Compressed air pulse cleaning ('Jet' cleaning) with time-controlled regulation for filter surface regeneration - PLC control system with display, for 4 slide valves EPN 24V DC, 4 machine start contacts and 1 start for external automatic switch-on (additional slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to water supply required) - Extinguishing agent ABC powder is not suitable for fires involving metals or cooking fats and oils - Non-return flap, type-tested Kodpox H Dahsfx Ahvedi - Manufactured according to DIN EN 16770 - Residual dust content in exhaust air below 0.1 mg/m³ - GS-HM-03 'H3' test passed - IE5 efficiency power pack - Start-up slide valve control: Z 16 - Motor power: 11 kW - Rated volume flow (Vnenn): 6,927 m³/h at 20 m/s - Max. volume flow (Vmax): 8,000 m³/h - Negative pressure at Vnenn: approx. 3,100 Pa - Negative pressure at Vmax: approx. 2,300 Pa - Collection volume: 495 liters - Sound pressure level: < 73 db(A) - Extraction nozzle diameter: 350 mm Dimensions: 3,930 x 1,030 x 2,560 mm Weight: approx. 1,080 kg Original price over €30,000 Availability: short-term Stock location: 63934 Röllbach

Year of construction: 2018, condition: new, Permanent overband magnetic separator TYPE PEM2200 2200 x 1000 x 400mm ===== Kdsdpfx Ahod Dy S Devji 4x eyebolt for suspension Rubber band GB30 Magnetic dimensions: 1200x500mm

Condition: used, Technical data: on request Paint room from Höcker Polytechnik consisting of: - Spray wall approx. 3 x 2.5 m - Supply air duct Kdedpexvb Sqefx Ahvoi - Heat exchanger - EX lamps.

Condition: excellent (used), Year of construction: 2007, volume flow: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 28 m², negative pressure: 2,700 Pa, Sawdust extractor, dust extraction, self-cleaning filter, vacuum brand Hoecker Polytechnik Model: EA 300-7A with pneumatic cleaning of filter bags during operation Year of manufacture 2007 7.5 Kw fan Capacity 6 000 m3/h Filtration area 28 m2 Vacuum pressure 2700 Pa Air return Kdjdpfsrp D Naex Ahvji Capacity of dust tanks - 495 l Equipped with automatic fire protection system Inlet diameter 300 mm Technical documentation included.

Condition: used, Year of construction: 2019, Sennebogen 835 M-HDS Series E - Tier 4 / EPA Year of manufacture: 2019 Cummins engine - EPA - Tier 4 / Stage V, 231 kW MP34 HDS mobile undercarriage Drive control via single accelerator pedal Solid rubber tyres 16.00-25 (4-piece) Joystick steering Additional counterweight, 0.8 tonnes Cab adjustment: E270 Maxcab Maxcab Industry with front and roof windscreen Comfort operator's seat, air-suspended Safety belt, 2-inch Front guard for windscreen, Maxcab Industry Sun blind for roof window, Maxcab Industry cab Sun blind for windscreen, Maxcab Industry cab Radio with USB, SD, MP3, Bluetooth Catwalk on cabin side, with bolted railing Railing on upper carriage (Boxing ring) Sennebogen Hydro-Clean filter for hydraulic oil K18 working equipment – 10.1 m + 7.9 m (59’) 20 kW generator 1 LED work light on the cab roof (rear-facing) 2 LED headlights on the stick (1 left, 1 right) 1 LED light on the lower boom Kdodpfx Ajxu U Euohvji

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Extraction system Hocker Polytechnik Model MultiStar JP5 Year: 2012 Capacity: 20,000 m³ Motor: 30 kW Including briquetting press BrikStar c-3 18 Vacuum operation Filter area: 121.3 m2 Filter bags: 100 units Bag length: 2,300 mm Bag diameter: 170 mm (outer surface under pressure) Kdedpoyvgqhsfx Ahvsi Compressed air connection: 6.0 bar, 1" Operating pressure: 4.5 bar Compressed air consumption: approx. 216 Nl per row of bags at a pulse duration of 200 ms Noise emission - Jet clean: approx. 75 dB (A), depending on local conditions Footprint (L x W): 2,540 x 2,420 mm Space requirement (L x W): 3,500 x 3,380 mm Connection at base: 2,300 x 2,300 mm internal Installation height: 4,430 mm Weight, approx.: 1,960 kg Duct bend 90°, 2 mm, Ø 900 x 800 mm, 1 pc. Bolted design, galvanized sheet steel, 2 mm Duct dimension 1: 900 x 800 mm Duct dimension 2: 900 x 650 mm Shape: asymmetrical 460406 Duct, 2 mm, 750 mm long, 900 x 800 mm 2 pcs., bolted design, galvanized sheet steel, 2 mm 1 blank cover, 2 mm, 900 x 800 mm 1 transition piece for MS xP on BrikStar 1 piece, 300 x 2,300 mm for existing briquetting press Manufacturer: Gross (approx. 1,100 x 1,100 mm / press height: 1,260 mm)

Condition: good (used), Year of construction: 2000, Dimensions (L/W/H) 2300 x 700 x 1300 mm Air consumption 3500 m³/h Motor output 1,5 kW Kdedsxr Rbmjpfx Ahvji weight of the machine ca. 150 kg

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm Kdedjt R T Hcspfx Ahvoi - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: good (used), Year of construction: 2000, machine/vehicle number: 169220, functionality: fully functional, power: 3.5 kW (4.76 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 2,714 m³/h, intake manifold diameter: 200 mm, filter area: 12 m², noise level: 78 dB, actuation type: electric, total height: 2,100 mm, total length: 2,256 mm, total width: 988 mm, overall weight: 430 kg, year of last overhaul: 2026, Equipment: CE marking, Clean-air side dust extractor with 200 mm extraction diameter, extraction connection on the left, 2 chip collection bins of 165 litres each, filter bags have been replaced! 35 filter bags, diameter 110 mm, length 1000 mm, filter area approx. 12 m². Certified for wood dust. Rated air volume flow 2714 m³/h, automatic cleaning with runtime addition. Minimum air volume flow 2262 m³/h. Motor power 3.5 kW, 400 V, 50 Hz, rated current 7.3 A. Includes start and slide valve control for 7 machines, including induction sensor coils. Weight approx. 430 kg. Sold as inspected from location Seevetal, without freight and packaging. Subject to prior sale. Kdedpfxsyucnfj Ahvoi

Condition: good (used), Year of construction: 2017, Dust suction hood 250 mm Kdodpoxzuxnjfx Ahvji Motor output 5,5 kW Dimensions (L/W/H) 2.650 x 1.030 x 2.500 mm

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 18,5 kW ✔ Shaft length: 870 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 2x19 ✔ Granulation: 10-50 mm ✔ Capacity: up to 7 m3/h* ✔ Material discharge opening: 200 mm ✔ Filling opening: 1446 x 1565 mm Kodshzlr Ispfx Ahvodi ✔ Dimensions L/W/H: 2,15/1,97/2,04 m ✔ Weight: 2050 kg 2 years warranty or 2000 working hours

Condition: good (used), Year of construction: 1991, material Stahl weight 300 kg turning speeds 1400 U/min motor 75 kW The Höcker Polytechnik L 300 industrial blower, built in 1991, impresses with its robust construction and an impressive air flow rate of 7,200 m³/h. With a 7.5 kW motor and a speed of 1,400 rpm, it is ideal for extraction and conveying Kedpoynmp Hofx Ahvedi tasks in workshops, production facilities, and filter systems. The fan runs reliably, is designed for durability, and comes from a renowned German manufacturer. Perfect for anyone looking for a solid and powerful solution for air and material transport.

Condition: used, Year of construction: 2009, Extraction diameter: 250 mm Rated volumetric flow: 3534 m³/h Filter area: 22.6 m² Motor: 5.5 kW Briquetting: throughput approx.: 30 kg/h Briquette diameter: 65 mm Motor: 3.0 kW Storage location: Nattheim Ksdpfeydql Dsx Ahvodi

Condition: new, Technical data: Kdjdjgtm U Ajpfx Ahvji Working width: 1100 mm Sanding belt dimensions: 1120x2150 mm Max working height: 160 mm Calibrating steel roller with a diameter of 150 mm Rubber roller with a diameter of 150 mm Sanding pad width: 50 mm Common motor power of 2 grinding aggregates: 11 Kw Speed of sanding belts: 16/18 m / s. Feed motor power: 0.55 kW Infinitely adjustable feeding belt: 4-20 m / min Worktable motor power: 0.25 Kw Pneumatic shoe for jump / jump: YES

Condition: used, Year of construction: 2018, machine/vehicle number: 519553, Central extraction system Höcker Polytechnik with rotary valve and/or dust bins.(Option: rotary valve instead of dust bins) Manufacturer: Höcker Polytechnik Type: Multistar JQ6/5 131/20717A Year of manufacture: 11/2018 Dust properties: Dust and chips Material throughput: Unknown Jet cleaning of filters Volume flow: Approx. 22,000 m³/h Disposal type: Open Clean air duct: Air recirculation Residual dust content: 0.1 mg/m³ based on dust. 1 piece Filter system, galvanized - Year of manufacture 11/2018 - Multistar JQ6/5 131/20717A - Filter area: approx. 131m² - Filter bags: 120 - Filter bag diameter: 170mm - Filter bag length: 2,070mm - Filter cleaning Air Jet, compressed air - Filter housing made of galvanized sheet steel - Inspection door, access ladder, standing platform - Tested pressure relief areas - Raw gas section as large expansion chamber - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, hot-dip galvanized. - Includes dry extinguishing line, C connection - *Optionally with 6 chip bins or large rotary valve*2 pieces Clean air fans DER 404/400/18.5-2 - Volume flow: 11,000 m³/h per fan - Directly driven fans - Galvanized sheet steel - Installed horizontally in Multistar series - Electrical power of each fan 18.5 kW - Total volume flow 22,000 m³/h - Total pressure increase: 4,600 Pa 1 piece Pipe components Air recirculation - Including galvanized ducts - Must be supplemented for a new location . 1 piece Control cabinet With PLC Siemens S7-1200 Dustproof sheet steel standard housing control cabinet as wall cabinet, built and completely wired, in accordance with VDE regulations 0100, 0113, and DIN 57113. The scope of delivery includes all components required for control components and the circuit igned for: · Jet cleaning control · Control of 2 fans · 6 automatic start-up of the fans when the machine starts · Pressure monitoring indicator light · 3 control butterfly valves · Rotary valve controlDimensions: - Length: 3,960 mm - Width: 3,380 mm - Height: 5,900 mm (may vary depending on equipment) Electrical connection value: - approx. 38 kW - 400 V/50 Hz - Control voltage 230 V AC/24 V DC Location at warehouse Kdjdpfoya Idvex Ahvsi