Condition: excellent (used), Year of construction: 1986, MAFELL Erika table saw, with side adjustable stop Dsbvreud At Ro Hgrout

Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 057, New price ca 100 000.- EUR The Dynagrade equipment is a product for on-line strength grading of structural timber (lumber), grades from C16 until C40 (most usual is C24) and TR26 for UK market . It is especially suitable for installation in sawmill sorting lines or planing mills or comparable plants where sawn (or planed) timber is transported by means of an existing cross-conveyor system. The grading is done with resonant frequency ("knocking" with hammer and measuring the sound frequency with microphones). Very high productivity, can handle up to 100pc/minute (400m/min if avg. length is 4,0m). Main prerequisites: Limber/timber size and length 1): Duobvr Hou Dnf Isgrot Thickness 19-110 mm, Width 60-300 mm, Length 1200-7200 mm Sawn or planed surface Dried lumber/timber, cut to angle Required space: less than 1 meter (3 ft) of a transfer line with lugged chains (standard)

Condition: used, Year of construction: 2016, Edgeband thickness max: 3 mm Dsbvr Hgsvbcnnoreut Panel thickness max: 40 mm Thickness of coiled edgeband max: 3 mm Workpiece width min: 70 mm Feedrate max: 10 m/min Glue system granulate: glue pot above feeding chain Quick-change glue pot: Yes Suitable for PUR glue: Yes Spraying device: Yes Premilling unit: Yes Trimming saw: 1 motor Flush/radius/chamfer milling units: 1 Nutfräsaggregat: Nutfräsaggregat starr Scraper unit: Flat scraper Aggregates actuated by control: pneumatic Free spaces for aggregates: 2 Type: right-side machine Machine length: 5.000 mm Control: SPS Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 12,7 kW Weight: 1.900 kg

Condition: excellent (used), WIDE BELT SANDER SCM sandya 5 grinding width 1100 MM 1 unit with metal shaft 2 combi unit with rubber shaft + foot Debswih R Novr Hgrout 15KW engine star/delta start stepless feed speed adjustment electric table adjustment + manual table position display element thickness gauge pneumatic feed belt centring oscillation on photocells

Condition: excellent (used), Year of construction: 2011, operating hours: 1,000 h, Functionality: fully functional, workpiece weight (max.): 450 kg, working height: 650 mm, working width: 400 mm, feed rate X-axis: 12 m/min, height adjustment type: mechanical, total length: 7,000 mm, total width: 550 mm, total height: 650 mm, type of input current: three-phase, throughput speed: 12 mm/s, Equipment: documentation/manual, Soest Roller Coater for Oiling with Oil - Hardwax Oil - Laquer - stains Djbvsvzkx Ijr Hgreut

Condition: good (used), Year of construction: 2003, Weinig Powermat (Unimat) 2000 Speed All Powerlock spindles Bottom 15kW 8,000 RPM Right 15kW 4,000 to 12,000 RPM with inverter Left 15kW 4,000 to 12,000 RPM with inverter Top 22kW 8,000 RPM Top 22kW 4,000 to 12,000 RPM with inverter Bottom 15 kW 4,000 to 12,000 RPM with inverter Dsbvowihmwer Hgrjut 11kW feed motor. Feed speed 40m/min Automatic lubrication system. Separate control panel Full documentation Possible to supply with automatic infeed and outfeed if needed.

Condition: excellent (used), Sold, in very good condition. Dobvr Hjud Ar Tjgrout Vertical band saw, manufacturer: DUCUROIR, type: S 80. Support table with adjustable inclination, table dimensions: 80x80 cm, with stop adjustable from the side, max. through: 75 cm.

Condition: used, Functionality: fully functional, machine/vehicle number: 3011 13408, Use Ready for use Duebvr Hgowihdvsrst

Condition: used, Year of construction: 1975, Motor power 4 kW, spindle diameter 30 mm, complete with feeder. Duebvewigrler Hgrot

Condition: excellent (used), Functionality: fully functional, 3-roller feed EUROPE Specification: • condition - used • manufacturer - EUROPE • 3 pulling rollers, practically new • forward/reverse rotation Dobvrjwigi Do Hgreut • speed regulation with switch and on gears • motor powered by 380V current (3 phases) • 4 working speeds in the range from 3.5 to 21.0 m/min • weight approx. 70 kg Additional information: • good technical condition • the photos presented show the actual condition of the item for sale • possibility of switching on and checking the device on site

Condition: excellent (used), Year of construction: 1990, I sell the press for glued massive solid wood panels Maweg Hildebrand Euro-Auto Duebvog Dvu Tsr Hgret Material size 2800X2000 x 120mm 2pcs. vertical pistons hydraulic. 2pcs. horizontal pistons hydraulic. Very good condition. Avialable immediately.

Year of construction: 2023, operating hours: 2,300 h, Condition: like new (used), Functionality: fully functional, List of plant components: 101 A-B DRY AND WET LOADING BUNKER 102 REDLER CHAIN DRYER LOADING 103 DRYER DOSING BUNKER 104 A-B-C-D-E-F BELT DRYER 105 REDLER CONVEYOR FOR DRYER UNLOADING 106 DRY MATERIAL CONVEYOR SCREW 107 MILL DOSING AND FEEDING BUNKER 108 MAGNETIC SEPARATOR AND IRON REMOVER 109 HAMMER MILL 110 PNEUMATIC MILL SUCTION CONVEYOR 111 VERTICAL BUCKET ELEVATOR FOR SAWDUST 112 DOUBLE SCREW MIXER 113 PRESS FEEDING SCREW 114 PELLET PRESS 115 UNLOADING SCREW PELLET PRESS 116 VERTICAL BUCKET ELEVATOR FOR COOLER FEEDING Dusbvswif Hber Hgrot 117 COLD AIR COUNTER-FLOW COOLER 118 VERTICAL BUCKET ELEVATOR FOR SILOS FEEDING 119 PELLET ACCUMULATION SILOS 120 HORIZONTAL CYLINDRICAL PELLET SCREENING CLEANER 121 DOUBLE CHAIN BUCKET ELEVATOR FOR PELLET LIFTING AND BAG FILLING FEEDING 122 PKT FILLING MACHINE Mod FPK44 122-A SOVEMA STAMPING MACHINE 122-B ABB ROBOT PALLETIZER Mod PRC 100 123 ELECTRIC CABINET AND SYSTEM ACCESSORIES 124 BIOMASS COMBUSTION BOILER WITH POWER SUPPLY AND AUTOMATIC ASH CLEANING 125 CE SUCTION SYSTEM Mod PF JET 240-24

Condition: excellent (used), Year of construction: 1982, Table saw ULMIA 1710s Year of construction 1982 Dsbvr Hgjufgnzsreut Tilting angle 45° Cutting length on cart 750mm Blade diameter max 250mm. Cutting height 75mm. Cutting width between the saw and the attachment 650 mm Scale carriage for cutting angles Table size 1000x630mm

Condition: used, Year of construction: 1994, Functionality: fully functional, machine/vehicle number: 12/1134, plate width: 2,200 mm, table width: 1,100 mm, Used, good condition, ready for use Dusbvrowig Hps Hgrot

Condition: good (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 2019-45, total length: 8,000 mm, total width: 4,000 mm, feed length X-axis: 8,000 mm, feed length Z-axis: 1,300 mm, cutting speed: 6,000,000 mm/min, feed rate X-axis: 70,000 m/min, cutting width (max.): 1,800 mm, table height: 700 mm, cutting height (max.): 1,300 mm, table width: 1,300 mm, table length: 3,000 mm, working height: 700 mm, input voltage: 400 V, saw band speed: 6,000,000 mm/s, HEMA CoreCutter from our test center - 6 years of operation in the test center - Ideal for sawing lightweight blocks made of aramid, Nomex, Kevlar, balsa, PET, PVC, PMI, PU, and much more Gantry - Steel construction - 2 linear guide units per column - Servo motor with ball screws per side - Bellows for guide/spindle cover - Red/yellow/green signal lights on the gantry Control system - Control cabinet with air conditioning unit - Siemens PLC - Frequency-controlled drives - WAGO IO-Link modules - Control panel with 12-inch screen, integrated in the control cabinet Paint finish - HEMA standard, gray RAL 7031/7047, signal red RAL 3001 Technical specifications: - Wheel diameter 2 x 900 mm - Cutting width approx. 1800 mm mm - Cutting height/vertical stroke approx. 1300 mm - Cutting height (saw blade – cleaning nozzle) approx. 300 mm - Belt drive 400 V, 50 Hz 22 kW - Continuously variable belt speed 500 – 6000 m/min - Table length 3000 mm - Table feed max. 80 m/min Dobvrjwifxdj Hgrjut - Compressed air 6 bar - Total machine length max. 8 m

Condition: excellent (used), Functionality: fully functional, 3-roller feed EUROPE Specification: • condition - used • manufacturer - EUROPE • 3 pulling rollers • forward/reverse rotation • speed regulation with switch and on gears • motor powered by 380V current (3 phases) • 4 working speeds in the range from 3.5 to 21.0 m/min • weight approx. 70 kg Additional information: • good technical condition Duebvr Hewigidogrot • the photos presented show the actual condition of the item for sale • possibility of switching on and checking the device on site

Condition: like new (used), Year of construction: 2012, I sell the vertical saw with scoring knives Putsch-Meniconi SVP-145, Condition like new. Cutting range 4200x2100mm Motor 3,0kW (4,0 HP). Dsbvrewigdbo Hgreut Cutting head tilting 0-90° With scoring knives unit (Holz-Her Supercut type) Manual cutting. Condition like new. Total weight 710kg. Available immediately.

Condition: good (used), Steff 3-Roll Feeder Type TN 80 Motor 0.55-0.74 kW / 400 V 4 Speeds Roll Size 120 x 60 mm (new) Including Universal Stand Debvr Hgewifk Hsrjut

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, Weinig Powermat 700 Compact profiling machine Year of production 2018 Tool arrangement (spindles) bottom - 5.5 KW right/left - on the same 11 KW engine top - 7.5 KW top - 7.5 KW bottom - 7.5 KW working width - 20 to 230 mm working height - 10 to 160 mm Duebevnruwjvr Hgrjt speed 7000 rpm electronic indicators for radial adjustment guide behind the first right spindle automatically locked table insert surfaces hardened with Marathon Coating top pressure rollers with the possibility of tilting and cushioning easy hose removal on the left spindle tilted upwards two side pressure rollers divided pressure shoe in front of the upper spindles electronic feed with brake 7 kW motor from 5-40 m/min 2m planer table side pressure roller on the feed table

Condition: as good as new (ex-display), Functionality: fully functional, Edgebander with most accessories in its technological range, with an excellent quality/price ratio. Work table dimensions 3465 x 710 mm Min. ÷ max. thickness of rolled edges 0,4 ÷ 3 mm Max. thickness of edges in strips 5 mm Min. ÷ max. panel height 8 ÷ 50 mm Min. panel length/width 190/110 mm Feed speed 9 m/min This edgebander increases productivity with the feed track of the panel brought to a speed of 9 m/min and it guarantees high quality standards in processing thanks to the possibility of working with polyurethane glue, perform grooves, all being extremely easy to use. MACHINE COMPOSITION: ME 40TR AUTOMATIC EDGE BANDER 109999 Security execution Dsbjqw Ux Tevr Hgrjut R00341 me 40tr versione CE 930731 Volt 400 EU 931201 Frequency 50 Hz 580653 EDGE SCRAPING UNIT 580444 BRUSHING UNIT 580654 GLUE SCRAPING UNIT 580656 Spare glue pot for poliurethane glue with fast unloading system 580509 Device for the panel edge heating 580510 Anti-adhesive unit 580548 Spray-mist device for edge finishing 580658 "Nesting" copying device kit for Trimming unit 580659 "Nesting" copying device kit for Edge scraping unit 580666 Internal machine lightening

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements depth 8260 mm Duebvr Hgjwg Ia Ssrjt This BRANDT KDF 991 edgebander was manufactured in 2008. It is designed for efficient edge banding applications. Consider the opportunity to buy this BRANDT KDF 991 edgebander. Contact us for more information. Application Types Edge Banding

Condition: ready for operation (used), Four-sided planer SCM P64 profiler Specification: • condition - after inspection, ready to work • manufacturer - SCM • model - P64 • working width - 180mm • working height - 120 mm • motors on vertical spindles - 1 x 5.5 kW • motors on horizontal spindles - 4.0 and 5.5 kW • feed motor - 1.5 kW • total power 16.5 kW • electric adjustment of planing height • manual adjustment of planing width • 4 spindles of 35 mm diameter • 4 segment heads included • vertical profiling heads, adjustable up/down (as in a low-spindle milling machine) Djbvrowigg Aj Hgrout • long insert table with dimensions 19 x 230 cm • 2 feed speeds (6 and 12 m/min) • roller pressure on springs • pump for lubricating the table top • extraction nozzles fi 120 and 150 mm • weight - approx. 1110 kg • dimensions 332 x 113 x 170 cm (length x width x height) Additional information: • the machine is in good technical condition, ready for immediate use • the photos show the actual condition of the item for sale • the machine is available immediately

Condition: good (used), Year of construction: 1997, I sell the double mitre saw BAUERLE DS-II. Cutting length 230 - 1500mm Cutting width max. 1500mm Cutting height max. 145mm 2 2 Vertical pneumatic Material pressures 2 Motors x 4,0kW (5,5 HP) Djbvr Hjwif T Usgreut Good condition. Available immediately.

Condition: like new (used), MITRE SAW , orientable +/-45° model PEGIC GP 350 RT with dust aspirator second hand machine , like new , used very little Debvrom Ak Els Hgrout working conditions : Excellent , like new CE regulation : Yes complete with extractor cabinet Technical data : volt. 380/50 engine power Hp 2,5 blade diameter mm. 350 with 90° blade : max height cut mm. 120 width max. cut mm. 150 with 45° blade : max. height cut mm. 115 max. width cut mm. 115 machine weight kg.52 extractor cabinet weight kg.48

Condition: like new (used), Year of construction: 2010, I sell the combined top + bottom sanding machine LOEWER DSM 2000D, year 2010. Configuration Top sanding pad + cleaning brush - Bottom sanding pad + cleaning brush . Working width 200mm. Total weight 1500kg Djbvr Hewif Ryjgreut Suitable for line. Construction with fixed working table height. Suitable for windows and floors production for fine sanding. Condition like new. Available immediately. Possible to test.