Wide belt sander

SCM Sandya

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding Ljdpfxexqggcj Ab Usah SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Catalogue number 7790 TECHNICAL DATA - Max. workpiece width: 1100mm - Max. workpiece height: 170mm - 2 units: - rubber pressure roller 1) knurled metal calibration roller - rubber pressure roller 2) knurled rubber roller + shoe + metal roller - rubber pressure roller - Motor power for units I and II: 11kW - From below: - 3 metal sliding rollers - Feed belt - 2 metal sliding rollers - Pneumatic belt oscillation - Electric and manual table lifting (for precise adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 8 bar - Extraction port diameter: 2x160mm, 4x100mm - Overall dimensions (L/W/H): 2000x1600x2100mm Lajdpfx Abjxpvuye Ueh - Weight: 1170kg ADVANTAGES - Non-repainted - Italian manufacture - 2 units - DTR technical documentation - Used sander in very good condition Net price: 36,900 PLN Net price: 8,680 EUR based on exchange rate 4.25 EUR (Prices may change subject to higher fluctuations)

Condition: excellent (used), USED MACHINE - V380/50 - "CE" Code: CAL-052 _ _ _ Working width: 1100 mm 1st group: steel roller 2nd group: rubber roller 3rd combined group: roller/pad Lasdsxp Ecyopfx Ab Ujh Motor power: 2 x 15 kW

Condition: excellent (used), Wide Belt Sander SCM Sandya Uno Working width: 900 mm Working height: 3–160 mm Number of sanding units: 1 Unit configuration: COMBI metal-shoe Main motor power: 4 kW Optical oscillation Abrasive belt dimensions: 930×1525 mm Weight: 830 kg Ljdpfx Aboxlq Ime Ujah

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: AE/020112, total width: 1,300 mm, overall weight: 2,750 kg, number of rollers: 4, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Overall width: 1,300 mm Ljdpfx Absxmhiws Usah Electrical data Rated voltage: 400 V Frequency: 50 Hz Phases: 3 ~ Rated current: 180 A Short-circuit current: 10 kA Max. load current: 420 A Weight: 2,750 kg EQUIPMENT Two rollers at the top Two rollers at the bottom Note: The machine was dismantled as part of a liquidation and is loaded onto a truck. The machine was fully operational at the time of dismantling.

Condition: excellent (used), Year of construction: 1999, working width: 1,100 mm, power: 15 kW (20.39 HP), Wide belt sander in good condition. Equipped with roller and combination roller. Extracts on carpet flooring, ideal for sanding smaller items. Sanding width 1100 mm. Europe-wide transport can be organized at a good price. Lsdpsxmfhdsfx Ab Uoah

Condition: excellent (used), SCM Sandya 3 wide belt sander, model: 3 RCS 95 - Max sanding width: 95 cm Lajdpfx Aoxl Twqsb Uoh - Single 11 kW motor - First calibrating unit with steel roller, second unit with platen, rubber-coated roller - Weight: 1 tonne, year: 1998 The machine is in very good condition. The machine runs very well.

Condition: excellent (used), Wide belt sander SCM Sandya 10 3M 110 Working width: 1100 mm Working height: 3-170 mm Number of sanding units: 3 Steel calibration roller – 9 kW Rubber roller – 9 kW Combi unit with pad Two sanding belt speeds Pneumatically liftable units Pneumatic oscillation with photocells Technical documentation CE certificate Abrasive belt size: 1120 x 2150 mm Ljdpfxsxixafe Ab Uoah

Condition: excellent (used), Wide Belt Sander SCM Sandya 20 3M 135 Working width: 1350 mm Working height: 3-170 mm Number of sanding units: 3 Steel calibration roller: 18.5 kW Ledexhgr Hepfx Ab Ujah Rubber roller: 12 kW Combi unit with segmented pad: 11 kW Cleaning brush at outfeed Vacuum pump Feed speed adjustable via frequency inverter Optical oscillation Sanding belt: 1370x2620 mm

Condition: excellent (used), SCM Sandya Win Wide Belt Sander Working width: 610 mm Sanding height: 3 – 140 mm 1 combi unit Electric height adjustment Pneumatic oscillation Ledpfsxhc H Hox Ab Ujah Two feed speeds