Pull saw under the floor

Mafell Erika

Condition: used, Light mitre saw Mafell Erika for workshop and construction site, incl. various clamps Saw blade Ø: 280 mm Gjdpfxex Rv Tzo Agbstt cutting height: 70 mm engine: 220 V // 1.3 kW

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 74-4-10, ALTENDORF F90 sliding table saw, year of manufacture 1974 Machine no.: 74-4-10 Manufacturer Altendorf Germany Gtodpfx Aeipvrbogbot Saw length mm: 2600 cutting width mm: 1.300mm Cutting height max mm: 130 Saw blade diameter max. 400 mm Main motor 5.5 KW with scorer 4 speed levels Saw blade height adjustment: manual Weight approx. kg: 780 Technical data subject to change

Condition: new, Year of construction: 2025, Machine features This planer and thicknesser is a well-designed machine, providing large adjustment and mechanical machining possibilities of hard and soft wood. Adjustment itself is relatively simple and transforming the planer into a thicknesser takes only a couple of seconds. Relatively high weight (148 kg) ensures stability, and work safety, reducing vibrations with additional anti-vibration feet. Advantages of the planer Gtsdpfx Agovxh Nxjbst Both tables of the planer are made of high-quality cast iron, with ground and Ra 1.6 polished surface Shaft guard can be freely set, adjusting its height, angle as well as extension Angular guide can be smoothly adjusted in the 90° – 45° range Planer tables involve additional sound dampeners decreasing noise Advantages of the thicknesser Thicknesser table is made of high-quality cast iron, with ground and polished surface Height is adjusted through a large and convenient handwheel, which, after adjustment, can be locked with an additional eccentric Its table is supported in 3 places Thicknessing can be lowered down to 190 mm Machine equipped with rollers (driving and receiving) which are located very close to the shaft, allowing for machining even short elements Roller feed drive is based on a belt, ensuring slip-free work (no "tooth marks" on the workpiece) Technical data Knife shaft diameter 75 mm Knife shaft speed 4800 rpm Extracting connector diameter 100 mm Swinging rule tilt angle 0–45° Number of knives 3 Maximum surface planer width 250 mm Maximum thickness planer width 248 mm Maximum surface planing height 180 mm Maximum thickness planer machining depth 3 mm Maximum surface planer machining depth 2.5 mm Thickness planer feed speed 6 m/min Dimensions (L×W) 1080×260 mm Weight 150 kg Motor power 2.0 kW Power supply 1 PHASE, 230V

Condition: new, Year of construction: 2024, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data for the shelf trolley: Manufacturer: LPR Type: 600 01x Shelf trolley, new Material color: blue / orange Total height incl. castors: 2,150 mm Total width: 1,550 mm Total depth: 600 mm Number of levels: 03 pcs. Consisting of each: 02x shelf uprights, new Material color: blue Frame profile dimensions: 50 x 50 mm incl. cross and diagonal braces, metal base plates, plastic Cover caps The stands are pre-assembled (bolted framework) 2,000 mm high 600 mm deep 06x workbench crossbars, new Material color: orange Design: stepped crossbar Clear width: 1,450 mm Profile dimensions: 80 x 50 mm Shelf load 300 kg with evenly distributed load 12x safety pins, new To secure the length supports against unintentional lifting out 03 x insertion sockets, second choice used Thickness: 22 mm Dimension: 1,430 x 545 mm 02x double-stop swivel castors, new 02x swivel castors, new 08x machine screws: M8 x 20 mm 08x Nuts: M8 08x washers: The pictures serve to illustrate the material. The material color may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days. Our services at a glance: (Prices on request) - Assembly and installation Our general assembly conditions must be observed Gtjdsdb N Hmspfx Agbst - Shelf inspection Rack inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all racking systems - Delivery with our own fleet of vehicles (without unloading)

Condition: like new (used), Year of construction: 2017, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 17002, cutting length (max.): 6,000 mm, power: 45 kW (61.18 HP), Kara F2000, little used, year of construction 2017, motor power 45kW, with feed and discharge system, dimensioning computer-controlled, incl. crosscut saw, incl. 6 saw blades, built-up grinder, incl. integrated extractor. Gsderg E Exopfx Agbett

Condition: used, SECOND-HAND RADIAL ARM SAW STROMAB Gjdpfx Agjwr T Hbsbett

Condition: good (used), - power supply - 230 V - motor power - 0,92 kW, 1,25 HP - rotational speed - 2850 rpm - blade diameter - 250 mm - disc bore diameter - 30 mm Gtsder A Anqjpfx Agbot - shield for the disc - cutting height - approx. 70 mm - cutting width - approx. 440 mm - arm length - approx. 660 mm - arm angle adjustment +/- 90° - blade angle adjustment 0°-90° - arm height adjustment - blade adjustment in vertical axis +/- 90° NO DISCS FOR DISCS

Year of construction: 1980, condition: excellent (used), max disc diameter 400mm adjustment of the cut in three angles motor power 2.2 kW cutting height 100 mm cutting width at 90° 850 mm Gtjdsm Ucyrspfx Agbst

Condition: new, Year of construction: 2026, High-speed timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table, and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.5 sec for a complete up-down saw motion. • Ø460 mm TCT blade with 5.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation Gtedpfsmcaahex Agbot • Overhead safety guards 300mm on each side of saw blade • Adjustable T-clamp with adjustable saw up-down cutting feed rate • Flat precision ground table, assuring cutting accuracy • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 120-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914mm diameter blade models Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting

Condition: as good as new (ex-display), Demonstration machine Gtjdpjx H Ukdjfx Agbst 2-chain infeed table with 2 hydraulic feed rollers Sample image