Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 260 mm, travel distance Z-axis: 600 mm, rotational speed (max.): 4,000 rpm, controller model: Fanuc 18i-TB, TECHNICAL DETAILS Guodpfx Agox Ahlwo Dok Swing diameter over bed: 560 mm Swing diameter over cross slide: 520 mm Spindle bore: 130 mm Spindle speed: 33 rpm – 4,000 rpm X-axis travel: 260 mm Z-axis travel: 600 mm MACHINE DETAILS Control: Fanuc 18i-TB Power: 22.0 kW Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,300 x 2,900 mm Transport weight: 7,500 kg Transport packages: 4 EQUIPMENT C-axis Three-jaw chuck Facing lathe Chip conveyor Driven tools

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 192 mm, turning diameter: 165 mm, travel distance X-axis: 195 mm, Equipment: bar feeder, TECHNICAL DETAILS Max. turning length: 192 mm Max. turning diameter: 165 mm X-axis travel: 195 mm Gujdpfx Asx Afzisg Djk EQUIPMENT Bar feeder

Condition: ready for operation (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, turning length: 1,540 mm, travel distance X-axis: 495 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 1,560 mm, swing diameter over bed slide: 660 mm, controller model: MSX-711 (MAPPS IV), Partially overhauled machine with only approximately 3,000 spindle hours! TECHNICAL DETAILS Turning length: 1,540 mm Max. turning diameter: 610 mm (Turret 2: 274 mm) Swing diameter over bed: 660 mm Swing diameter over cross slide: 660 mm (Turret 2: 300 mm) Turning/Milling Spindle X-axis travel: 495 mm Y-axis travel: 125 mm Z-axis travel: 1,560 mm B-axis: 120 degrees Spindle speed: 12,000 rpm Drive power: 18.5/11 kW (10 min./continuous operation) Tool Magazine Magazine positions: 76 Tool holder: Capto C6 Gedpfx Agex An Uxe Douk Lower Turret Number of tool stations: 10 Tool change time: 0.19 s Main Spindle Spindle speed: 5,000 rpm Main spindle drive power: 22/18.5 kW (30 min./continuous operation) Sub Spindle Spindle speed: 5,000 rpm Sub spindle drive power: 22/18.5 kW (30 min./continuous operation) MACHINE DETAILS Control system: MSX-711 (MAPPS IV) Operating hours Spindle hours: 3,006 h Operating hours: 4,526 h EQUIPMENT Spindle 2 with tailstock option Electronic handwheel Interface for high-pressure coolant system Chip conveyor Air nozzle for chuck and tool tip Automatic tool measurement system for upper and lower positions Bar feeder interface Hobbing function

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, empty load weight: 8,400 kg, Submitting a bid obligates you to collect the item on time in calendar week 1 or 2 of 2026! Lathe with portal loading! MACHINE DETAILS Weight: 8,400 kg Gusdexzudkepfx Ag Dok

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: FXH14B001, turning length: 1,600 mm, spindle speed (max.): 2,500 rpm, travel distance Z-axis: 900 mm, workpiece weight (max.): 8,000 kg, table diameter: 1,250 mm, The machine has only been used approximately 5 times! TECHNICAL DETAILS Travel X-axis: −685 mm to +680 mm Travel Z-axis: 900 mm Travel W-axis: 800 mm Max. swing diameter: 1.600 mm Max. turning length: 1.600 mm Max. workpiece weight: 8,000 kg Table Table diameter: 1,250 mm Low speed: 5–120 rpm High speed: 150–300 rpm Machining spindle Spindle speed: 25–2,500 rpm Max. spindle torque: 478 Nm C-Axis Nominal speed: 3.33 rpm Feed range (milling): 0.1–3,000 mm/min Feed range (turning): 0.01–500 mm/rev Tool changer Tool shank: BT50 Tool magazine capacity: 16 Max. tool diameter: 220 mm Max. tool length: 500 mm Max. tool weight (milling): 25 kg Max. tool weight (turning): 50 kg Tool change time: 30 s MACHINE DETAILS Gusdpfx Aox Atpbog Djk Control brand: Fanuc 0i-T Dimensions Machine height: 5,625 mm Machine weight: 22,000 kg Supply Electrical connection: 90 kVA Air requirement: 5.5 kg/cm² Coolant capacity: 150 l

Condition: excellent (used), Year of construction: 2017, operating hours: 2,138 h, functionality: fully functional, machine/vehicle number: 8107000122B, rotational speed (max.): 8,500 rpm, feed length X-axis: 70 mm, feed length Y-axis: 405 mm, feed length Z-axis: 100 mm, bar diameter (max.): 32 mm, New price: €215,000 TECHNICAL DETAILS Type of CNC control: Fanuc 32i-B Number of spindles (C-axes): 2 Number of axes: 5 Number of channels: 2 Main spindle data Maximum bar capacity: 32 mm Draw tube bore: 38 mm Maximum speed: 8,500 rpm Torque (S2 15 min / S1): 51.9 / 40.4 Nm Power (S2 15 min / S1): 7.5 / 5.5 kW Sub-spindle data Maximum bar capacity: 32 mm Draw tube bore: 38 mm Maximum speed: 8,500 rpm Torque (S2 30 min / S1): 23.6 / 14 Nm Power (S2 30 min / S1): 3.7 / 2.2 kW Axis data X1/Y1/Z1 Travel X1/Y1/Z1 (with turning quill): 70 / 405 / 100 (240) mm Maximum speed X1/Y1/Z1: 40 / 30 / 40 m/min Maximum acceleration X1/Y1/Z1: 5 m/s² Nominal thrust (S1) X1/Y1/Z1: 2,200 / 4,400 / 2,200 N Axis data X2 / Y2 / Z2 Travel X2 / Y2 / Z2: 300 / 135 / 200 mm Maximum speed X2 / Y2 / Z2: 40 / 30 / 40 m/min Maximum acceleration X2 / Y2 / Z2: 5 m/s² Nominal thrust (S1) X2 / Y2 / Z2: 2,200 N Toolholder data Slide 1 Number of fixed tools for internal machining: 4 + 4 Toolholder diameter: 25 mm Number of fixed tools for external machining: 6 Toolholder system: 16 x 16 mm Number of driven tools: 4 Collet type: ESX20 Max. speed of driven tools (GEO 7-9): max. 4,000 rpm Nominal torque (S3 40% / S1): 5.25 / 4.5 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Max. speed of driven tools (GEO 8-10): max. 6,000 rpm Nominal torque (S3 40% / S1): 3.5 / 3 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Toolholder data Slide 2 Number of fixed tools for internal machining: 4 Toolholder diameter: 25 mm Number of driven tools: 4 Collet type: ESX20 Max. speed of driven tools (GEO 8-9-10-11): max. 6,000 rpm Nominal torque (S3 40% / S1): 3.5 / 3 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Toolholder data sub-spindle slide Number of fixed tools for internal machining: 2 Toolholder diameter: 25 mm Lubrication unit data Capacity: 1.8 L Operating pressure: 20 bar Idle period: 7 min Operating period: 30 s Lubricant: ENI EXIDIA HG 68 Pneumatic unit data Min. operating pressure: 5 bar Max. operating pressure: 6 bar Base machine consumption: 180 NL/min MACHINE DETAILS Dimensions: 2,309 x 1,448 x 2,087 mm Gujdpox Eikgofx Ag Dok Connected load: 16 kVA Weight: 3,450 kg Noise level: 75 dB(A) Power-on hours: 3,743 h Spindle hours: 2,138 h EQUIPMENT - with bar feeder 32 x 3000 mm - different channels for bar feeder - high-pressure unit - conversion kit for short turning - various collets, guide bushes, and tooling

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: F-00334, controller manufacturer: Siemens, controller model: SINUMERIK 802C, MACHINE DETAILS Control brand: SIEMENS Guodpfxox D T A Dj Ag Dok Control model: SINUMERIK 802C

Condition: ready for operation (used), Year of construction: 2005, operating hours: 17,832 h, functionality: fully functional, turning length: 135 mm, turning diameter: 190 mm, spindle speed (max.): 5,000 rpm, bar diameter (max.): 42 mm, controller model: FANUC 18i-TB, Equipment: bar feeder, TECHNICAL DETAILS Maximum turning diameter: 190 mm Maximum turning length: 135 mm Maximum bar diameter: 42 mm Spindle speed: max. 5,000 rpm Spindle bearing diameter: 85 mm Power: 7.5 kW Tailstock / Turret Boring bar holder: 25 mm Travel X-axis: 162.5 mm Travel Z-axis: 450 mm Travel Y-axis: ±30 mm Travel A-axis: 475 mm Rapid traverse X-axis: 18 m/min Rapid traverse Z-axis: 24 m/min Rapid traverse Y-axis: 12 m/min Rapid traverse A-axis: 30 m/min Driven tools Tool magazine positions: 12 Max. speed driven tools: 4,000 rpm Drilling capacity (diameter): 13 mm Milling capacity (diameter): 13 mm Tapping: M4 – M8 Number of tool magazine positions: 12 MACHINE DETAILS Control: FANUC 18i-TB Dimensions & Weight Dimensions (L × W × H): 2,950 × 2,015 × 2,000 mm Machine weight: 6,700 kg Axes: 8 Simultaneously controlled axes: 4 Operating hours Power on time: 51,408 h Operating time: 17,832 h Piece counter: 670,941 pcs EQUIPMENT 2 turrets Sub-spindle Bar feeder IEMCA BOSS 545E Chip conveyor 5 driven tools 9 standard tools Gusdoxz Audepfx Ag Djk

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter: 380 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, counter spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Machining Area Maximum machining diameter: 380 mm Bar capacity: 77 mm Travel X-axis: 230 mm Travel Z-axis: 575 mm Spindle Data Main spindle speed: 4,000 rpm Main spindle motor power: 22 kW Sub spindle speed: 6,000 rpm Sub spindle motor power: 7.5 kW MACHINE DETAILS Control: Mazatrol 640T Nexus EQUIPMENT 12-position turret with driven tools Interface for bar feeder Short bar loader Multifeed MLI 3-jaw chuck Kitagawa B-210 3-jaw chuck Kitagawa B-206 Automatic parts catcher with conveyor belt Oil mist extraction system Bidding obligates timely collection by week 4 of 2026! TECHNICAL DETAILS Machining Area Maximum machining diameter: 380 mm Bar capacity: 77 mm Travel X-axis: 230 mm Travel Z-axis: 575 mm Spindle Data Main spindle speed: 4,000 rpm Main spindle motor power: 22 kW Sub spindle speed: 6,000 rpm Sub spindle motor power: 7.5 kW MACHINE DETAILS Control: Mazatrol 640T Nexus EQUIPMENT 12-position turret with driven tools Interface for bar feeder Short bar loader Multifeed MLI 3-jaw chuck Kitagawa B-210 3-jaw chuck Kitagawa B-206 Automatic parts catcher with conveyor belt Oil mist extraction system High-pressure coolant: 5 bar Chip conveyor High-pressure coolant: 5 bar Gsdpfx Agjx Di Uio Dsuk Chip conveyor

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, empty load weight: 8,400 kg, Submission of a bid obligates timely collection in calendar week 1 or 2 of 2026! Gedpfxjxzubpe Ag Deuk Lathe with gantry loading! MACHINE DETAILS Weight: 8,400 kg

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 5600 kg Measurements width 1850 mm Measurements depth 3130 mm Control Unit Brand FANUC Main Drive Spindle speed range 3500 Spindle motor power 18.5 / 22 kW Number of axis 2 Guodpfx Aox Hbkwog Dsk Movement X-Axis Movement 260 mm X-Axis Rapid Traverse 20 m/min Z-Axis Movement 790 mm Z-Axis Rapid Traverse 24 m/min Workpiece Workpiece drm over bed 570 mm Workpiece drm over support 450 mm Tools Number of index 12 Additional Equipment 4 units available This DOOSAN PUMA 300 C horizontal turning machine was manufactured in 2006. It features a 12-inch chuck, a maximum turning diameter of 350 mm, and a maximum turning length of 760 mm. The spindle supports a speed of up to 3,500 rpm with a bar capacity of 76 mm. Ideal for precision turning, it also includes a servo indexing tool post with 12 tools. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, CNC Horizontal Lathe Mori Seiki NL2000Y/500 Guodpfx Aswvrfkog Djk Year 2012 Controller : MAPPS III Max Swing Ø923mm Max over cross slide Ø755mm Max Turn Ø356mm Bar Capacity Ø65mm Travel X260mm / Z590mm Y +/-50mm Spindle Speed 5000rpm Turret 12 stations Max. milling speed 6,000rpm Chip conveyor Stock Clearance at 39.000EUR ONLY

Condition: excellent (used), Year of construction: 2020, turning diameter: 200 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 230 mm, 4-Spindle, 2-Turret CNC Lathe KITAKO SHIMADA HS4200, Year 2020, Fanuc-0iTF control, Max. working diameter 200mm. Gujdpfox Eht Tjx Ag Dek

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 300 mm, TECHNICAL DETAILS Turning length: 300 mm Distance between centers: 800 mm MACHINE DETAILS Control: FANUC 16T Gjdpfsxz Apbjx Ag Dsuk EQUIPMENT 3 turrets Sub-spindle

Condition: excellent (used), Year of construction: 2005, operating hours: 64,000 h, functionality: fully functional, turning length: 4,500 mm, WFL M60 x 4500 Turning, Milling and Drilling Center with 5 Axes Manufacturer: WFL MILLTURN Model: M60 x 4500 Gusdpfx Aex H Awfsg Djk Location: Europe Year of manufacture: 2005 Turning length: 4,500 mm For all technical details of the machine, please refer to the attached technical documentation and photos. Below is a summary of the key specifications: Lubrication and Cooling Systems Central lubrication system Tank capacity: 6 l Oil type: ISO VG 68 Delivery rate: 0.5 l/min Max. pressure: 27 bar Minimum Quantity Lubrication (MQL) Tank capacity: 6 l Oil type: Klübersynth GH 6–100 Delivery rate: 0.5 l/min Max. pressure: 27 bar Pneumatic System Air consumption: approx. 200 l/min Operating pressure: 6 bar Working Area Nominal length (turning length): 4,500 mm Swing diameter over bed (linear guide X-axis): 690 mm Swing diameter over cross slide: 610 mm Swing diameter over telescopic covers: 650 – 730 mm Swing diameter over steady rest: 530 mm Spindle center height from floor: 1,193 mm Main Spindle Spindle mount: DIN 55026, Type A, Size 11 Front bearing: Ø 160 mm Rear bearing: Ø 150 mm Spindle bore: Ø 115 mm Draw tube passage: dependent on chuck type used Main Drive Motor power (100% duty cycle): 40 kW Spindle torque (gear 1 / 2): 1,830 / 458 Nm Total speed range: 8 – 3,300 rpm Gear 1: 8 – 825 rpm Gear 2: 33 – 3,300 rpm Upper Slide (X/Z) Feed force (Z / X): 2,000 daN Ball screw drives (Z / X): 63 × 20 / 63 × 10 mm Rapid traverse (Z / X): 20 / 15 m/min Travel Z-axis: 4,650 mm Travel X-axis: 700 mm (+670 / −30) Milling and Drilling Unit Max. spindle power: 25 kW Max. spindle torque: 300 Nm Front spindle diameter: 100 mm Speed range: 10 – 4,000 rpm Travel Y-axis: 300 mm (+175 / −125) Rapid traverse Y-axis: 12.5 m/min Feed force Y-axis: 1,500 daN Ball screw drive Y: 40 × 5 mm B-axis torque: 1,200 Nm B-axis swivel range: 200° (−110° / +90°) Tool holder: SANDVIK Capto C8 C-Axis Max. speed: 25 rpm Max. torque: 1,500 Nm Smallest programmable increment: 0.001° Clamping torque (disk brake): 4,000 Nm This offer is non-binding and subject to prior sale. We are pleased to answer any questions, provide a more detailed specification of the equipment, or coordinate further details (e.g., clamping devices, tool package, commissioning, and training).

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 100226, The submission of a bid obligates you to collect on time in week 1 or week 2 of 2026! MACHINE DETAILS Total weight: 10,000 kg Electrical connection Mains type: 3~ Frequency: 50 Hz Operating voltage: 400 V General control voltage: 24 V Valve control voltage: 24 V Connected load: 36 kW Rated current: 56 A Main fuse: 80 A Lighting connection: 24 V Lighting connection power: 18 W Gsdpfexzt R Njx Ag Deuk

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 6200 kg Main Drive Spindle Speed 6000 RPM Spindle motor power 9 kW Control Unit Brand SIEMENS Model 840D (NC) This Hanwha STL45D was manufactured in 2011. It features a Siemens 840D control system, with main and sub spindles capable of 6,000 rpm and 5,000 rpm respectively. It supports a max turning diameter of Ø45 mm and includes 12 tool stations on both turrets. Additional features include a chip conveyor, product conveyor, and hydraulic brakes on both spindles. If you are looking to get high quality turning capabilities consider the Hanwha STL45D machine we have for sale. Contact us for more information. Application Types Godox D Hgcepfx Ag Djuk Turning

Condition: used, Year of construction: 2021, turning diameter 400 mm turning height 300 mm swing diameter 520 mm workpiece weight 60 kg x-axis 995 mm y-axis +/-30 mm z-axis 580 mm chucking diameter max. 500 mm Tool drive speed max. 6.000 1/min Main spindle drive power 37 KW tool turret with 12 work positions BMT75 Godpsx H Aibefx Ag Dsuk total power requirement 55 kW weight of the machine ca. 13,5 t Circulating workpiece transport system, O-design Drag frame system for 10 workpieces Coolant supply: 15 bar Coolant pump with a flow rate of approx. 80 l/min at 15 bar. Cooling unit (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are maintained at ambient temperature (10°C - 40°C). Dual coolant filter, manually switchable Filter mesh 100 µm, with electrical and mechanical contamination indicator Chip conveyor Hinged belt design: to the rear Chip discharge height 1,100 mm. (with integrated coolant reservoir, capacity approx. 500 l) Emulsion mist extraction: Extraction capacity approx. 800 m3/h Flushing gun Workpiece measurement with measuring probe Blow-off measuring probe Tool life monitoring (sister tool management) Tool breakage monitoring TOOLINSPECT MCU-EUROPA Axial drilling and milling head - BMT75 CC 5x 90° angle drilling and milling heads - BMT75 CC (i=1:1) Tool set for OP10 + OP20 Hydraulic full clamping cylinder size 150 - with 1 media feed-through Max. tensile force 10,850 daN at 70 bar Coolant through the spindle Programmable clamping pressure adjustment 3-jaw power chuck KNCS-N 500-155 quick-change Max. = 2,200 rpm (standard speed according to DIN 6386) Set of hard base jaws Set of soft top jaws Attachments for KNCS-N 500-155 Flushing nozzle in chuck bore Additional tool holders with tools: 1x 8.BMT25VL8IKX50 External finishing cutter 1x 8.BMT25VL8IKX50 External roughing cutter 1x 60.7516VL8IKDI15 Engraving tool 1x 60.7516VL8IKDI15 Tapping chuck 1x 40.75V5KRVL8IKD 50mm cutter head 3x 80.75V5VL8IKD boring bar holder 2x 27.V520HYDL26 drill bits, 20mm diameter 1x 42.V522L08Ik drill bits, 22mm diameter 1x 27.V514WNL31 Drill Bit Diameter 14mm Software Package Operating Instructions / Maintenance Manual

Condition: used, Year of construction: 2014, CNC turning and milling center (9 axes) with Y-axis, B-axis, sub-spindle, and tool turret CNC control FANUC 31iTA with Manual Guide i Swing diameter over bed: 750 mm Swing diameter over cross slide: 600 mm Collision-free turning diameter: 210 mm Max. turning diameter main spindle: 540 mm Max. turning length: 1,520 mm Main spindle left and right (sub-spindle) Chuck diameter: 210 mm Spindle bore: 76 mm Bar capacity: 66 mm Speed range up to: 5,000 rpm Max. torque: 318 Nm Turning/milling spindle (swivel head, B-axis) Speed range up to: 12,000 rpm Torque: 81 Nm Drive power: 18.5 kW Positioning: 0.001° Swivel range: 240° (+120°) Tool magazine ATC Number of magazine stations: 40 Tool holder: CAPTO C6 Lower turret Tool stations: 12 Drill holder diameter: 40 mm Tool shank cross-section: 25x25 mm Tool holder type: BMT 55P Motor drive power: 5.5 kW Tool speed: 5,000 rpm - Chip conveyor - Parts removal with conveyor belt - Tool measurement arm - Internal coolant supply through sub-spindle - Chuck cleaning Gusdpex Hy R Nofx Ag Dok - Air/water through turret - Knoll compact filter unit - Automatic workpiece measurement

Condition: used, Year of construction: 2007, MAZAK QTN 250IIM, year 2007, MATRIX control C-axis, driven tools Turning length: 1000 mm Chuck: 10 inch Spindle bore: Ø 77 mm Max. turning diameter: Ø 380 mm Spindle speed: 35–4000 rpm Spindle nose: A2-8 Spindle power: 26 kW 12-position turret – all stations driven Driven tools: 4500 rpm – 5.5 kW Tailstock Tool measuring probe Godex Hxzgopfx Ag Dsuk Chip conveyor Specification PDF below

Condition: ready for operation (used), Year of construction: 1998, operating hours: 7,984 h, functionality: fully functional, machine/vehicle number: 1408, turning length: 250 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, bar passage: 65 mm, controller model: Okuma OSP7000L, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning diameter: 340 mm Maximum turning length: 250 mm Main Spindle Technology: Motor spindle Speed: 4,500 rpm Power (max.): 22 kW Bar capacity: 65 mm Workpiece clamping: 3-jaw chuck, Kitagawa B-210 Tool Turret I (X/Z) Technology: 12-station turret Tool holder: VDI40 Travel in X: 260 mm Travel in Z: 640 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min Guedpfx Agex Hx Dne Dek Tool Turret II (X/Z) Technology: 8-station turret Tool holder: VDI40 Travel in X: 140 mm Travel in Z: 615 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min MACHINE DETAILS Control: Okuma OSP7000L Dimensions & Weight Dimensions (L x W x H): 3,305 x 2,100 x 1,927 mm Weight: 4,800 kg Electrical connection data Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Power consumption: max. 30 kVA Total current: 43.4 A Motor current: max. 106 A Operating Hours Power-on hours: 36,348 h Cutting time: 7,984 h Spindle run time: 8,674 h EQUIPMENT Chip conveyor Coolant pump Automatic measuring arm Transformer

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Z-axis: 300 mm, TECHNICAL DETAILS X-axis travel: 660 mm Z-axis travel: 300 mm Chuck diameter: 250 mm Gjdpsxy Hp Nsfx Ag Dsuk Swing diameter: 270 mm

Condition: ready for operation (used), Year of construction: 2012, Control Unit Brand SIEMENS Gujdpfx Agjx D Sqas Dok Model Sinumerik 840D Ergoline Main Drive Number of axis 4 Additional Equipment Coolant pump 6 bar, 201 l/min Chuck rinsing device outside at main spindle Coolant equipment external on turning/milling spindle Hinged type chip conveyor, discharge height 1200 mm Cooling system for spindle motor, turning/milling spindle, and B-axis torque motor Connection for oil mist extractor Machine prepared for workpiece handling robot WH3 (front loading) Environmental packages for unstable supply and increased ambient temperature This 5-axis DMG MORI Gildemeister CTX 1250 TC was manufactured in 2012, featuring a turning length of 1250 mm and a main spindle speed up to 5000 min⁻¹. It includes a Y-axis travel of 100 mm, B-axis ±110°, and a tool magazine with 24 positions. Ideal for complex machining tasks, it also comes equipped with a Siemens SINUMERIK 840D control system. If you are looking to get high-quality turn-mill capabilities, consider the DMG MORI Gildemeister CTX 1250 TC machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 123, spindle speed (min.): 200 rpm, spindle speed (max.): 10,000 rpm, total height: 2,200 mm, total length: 9,000 mm, total width: 1,500 mm, overall weight: 5,000 kg, controller manufacturer: FANUC, controller model: SERIES 32i-MODEL B, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI B0266E-II CNC Automatic Lathe - Operating voltage: 200 V - Frequency: 50 Hz - Rated current: 21.4 A - Max. bar capacity: 26 mm - Max. machining length: 320 mm (synchronously driven guide bushing) - Without guide bushing: 50 mm - Max. drilling diameter: 12 mm - Max. tapping diameter: M10 - Deep hole drilling diameter: 10 mm - Max. clamping diameter sub-spindle: 26 mm - Max. drilling diameter sub-spindle: 10 mm - Max. tapping diameter sub-spindle: M10 - Max. drilling diameter tool spindle: 8 mm (front/rear tool holder) - Max. tapping diameter: M6 (front/rear tool holder) - Max. slot milling cutter diameter at tool spindle: 45 mm - Rotating guide bushing: 200 - 10,000 rpm (synchronously driven) - Tool spindle speed: 200 - 6,000 rpm - Total number of tools (standard specification): 31 - Tool size: 16 mm square x 100 mm - Rapid traverse: 32 m/min; rapid traverse in X1 and Y1: 24 m/min, in Y2: 24 m/min - Controllable axes: 6 Guodpfxsx Hxz Hs Ag Dok The machine is equipped with a bar loader from FMB, type: TURBO 3-36, and a chip conveyor. Note: The item must be collected, by firm appointment, between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck

Year of construction: 2018, condition: ready for operation (used), Control Unit Brand HAAS Main Drive Spindle speed range 2400 rpm Spindle motor power 40 hp Number of axis 2 Tail Stock Pinol tool taper MT5 Media Chip conveyor Yes Additional Equipment Guedpfxsx D I Ube Ag Dsk Line Filter & Surge Suppressor – 220 VAC, 3-phase, 80 A, 60 Hz Early Power-Failure Detection Module Belt-Type Chip Conveyor This HAAS ST-40 was manufactured in 2018. It features a 15-inch chuck, a maximum part swing of 35.5 inches, and a cutting diameter of 30 inches. The machine includes a 2-speed gearbox spindle, capable of 2,400 rpm, and a 12-station BOT turret. Additional equipment includes a belt-type chip conveyor and a programmable servo tailstock. Consider the opportunity to buy this HAAS ST-40 horizontal turning machine. Contact us for more information about this machine. Application Types Turning