Used Ecm for sale (45)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 220211014047, ECM Synchronika incl. 2 ECM S-Automatik 64 Coffee Grinders and Brita C300 Water Filter Polished stainless steel Basic features: Steam outlet, hot water outlet, dual boiler system, PID temperature control, pre-heated cup warmer, rotary pump, direct water connection / 2.8L water tank, 2 portafilters with single and double baskets, 1 blind filter, including high-quality stainless steel tamper. Standard color: Silver Technical specifications: Dimensions (mm): W335 x D490 x H410, Weight: approx. 30 kg, Heating output: max. 2.6 kW, Power supply: 230V/110V Including 2 ECM S-Automatik 64 coffee grinders – polished stainless steel Specifications: Housing: aluminum, Burr diameter: 64 mm, Burr material: stainless steel, Motor power: 450 W, Dosing: infinitely adjustable grind setting, Weight: 6.9 kg, Dimensions (W x D x H): 145 x 200 x 415 mm Brita C300 water filter Specifications: Complete filter: flow meter, filter head, filter cartridge, hose set Capacity: 4000 liters (at water hardness of 10° dKH) Weight (dry/wet): 2.7 kg / 3.9 kg Water connection: 3/8" inch Ppsdpfx Ahsxf D Ugs Hsl

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: M1042, Technical characteristics: # Working chamber: 980 × 860 × 900 mm (W × H × D) # Working table height: 935 mm # Mechanical weight: 1900 Kg Electrical Equipment # Power supply: 400 VAC, 3-phase, 50 Hz # Installed capacity: 30 kVA # Generator output: 450 A / 43 V DC (pulse technology included) Dimensions # Machine Dimensions (L×W×H): 2100 × 2000 × 2600 mm; Equipment consists of: Ppedpfxoxx Nkys Ah Hjl # Main machine, electrolyte filtration system, industrial cooler, electrolyte treatment (CR-6 elimination) Dosing unit for electrolyte stabilization # Control system: Siemens HMI – User-friendly interface: Touch panel with integrated tool menu # Communication module for tooling needs: up to 12 signals # Safety features: Light curtain or sliding door for operator protection # Process monitoring: Real-time data tracking and short-circuit detection Machine status: WORKING # Safety light barrier – needs replacement

Year of construction: 2017, condition: used, functionality: fully functional, The press was operated from 3/2017 until 2022 when was professionally dismantled. It is stored in a protected warehouse, in Kirov, Russia. The press was operated for a maximum of 6 days a week in 2 shifts. It was sold more than 60,000 large washbasins produced on this press. Price of 280 000 EUR. The owner of the press is Dřevojas, Czech republic. Price for new machine was 456 000 EUR. Width: ~4920 mm Length: ~14020 mm Height: ~3085 mm Weight: ~45 ton (product purchase trolley group and moulds are not included) Ppsdpfxjrt Tw Ds Ah Hsl Max Mould size: 1000mmx1700mmx650mm Max mould number: 8 Horizontal or 12 Vertical Energy: 380 V Air: 16 bar Cudtjikx Water (45°C): 4 bar (min.) Water (70°C): 3-4 bar

Condition: good (used), Year of construction: 1998, functionality: fully functional, MAKA ECM 27 R Year of manufacture: 1998 - High-performance CNC milling center for 5-axis machining, ideal for machining aluminum and for mold making. - MAKA ECM 27 R in portal design. - Equipped with automatic central lubrication and control cabinet with air conditioning unit. - CNC control BWO 900C, memory 1 MB, in integrated PC. - Portable control panel BWO RC 910. Technical data: Working areas / cube dimensions: with tool length 130 mm and -Ø 60 mm X-axis: 3,000 mm Y-axis: 2,250 mm Z-axis: 800 mm, with 170 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 40 m/min. Z-axis: 15 m/min. A/B axis: 10,000 °/min. 1 milling spindle 11 kW, Speed infinitely variable from 2,000 - 17,000 rpm, With ceramic bearings, liquid cooling. SK 40 tool holder with tool changing device. 1 chain tool magazine for 12 tools up to Ø 160 mm, including 2 for holding an angle drill head (fixed position coded), SK 40. 1 steel surface table 3,000 x 2,250 mm with T-slots. 1 vacuum pump approx. 140 m²/h, with 250 liter tank. 1 piece vacuum clamping circuit. Work safety: With safety cabin for the rear of the machine, side access door, the cabin is open at the top. Slatted curtain on the operator side and safety bumper on the front of the table. Repairs / renewal before delivery: - Maintenance. Connected loads: Voltage: 400 V (max. +/- 5%), frequency: 50 Hz Rated power: 22.5 kW The use of an RCD in the machine supply line is not possible. Operating temperature: 10 - 35° C Pneumatics: 6 bar, approx. 10 m³/h Tool holders and processing tools are not included in the scope of delivery. Used machine, without any guarantee or warranty. Optional: Ppjdpfx Ahst Dl U Eo Hsl incl. installation and commissioning with production-ready handover!

Condition: excellent (used), CNC INFOTEC Machining center Model: 3121 3-axis Year of production: 2016 Psdpfx Aeun Rqyoh Hopl Machine working area dimensions for axes X and Y: X: 2200 mm Y: 3100 mm Head stroke in the Z axis: 250 mm Machine working speed X, Y, Z: X: 60m/min Y:60m/min Z:12m/min Vacuum table Price of a new machine: approx. 75.000 € Price: 27.900 €

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 24 kg, total height: 1,000 mm, total width: 330 mm, total length: 530 mm, The MultiTest 2.5dV is one of the most widely supplied tensile and compression test stands. The tester is robust, precise, and fully customizable with load cells, grips, and software. The MultiTest 2.5dV can be fitted with load cells ranging from 2 N to 2.5 kN, depending on your requirements. The VectorPro Lite software is highly intuitive and features a clear interface. This makes the tester suitable not only for laboratories and inspection rooms, but also for use directly in production environments. When using the software, all data is automatically stored and can be retrieved at any time. Without the software, the tester operates as a stand-alone device and can transmit measurement values to a computer in multiple ways. The price includes a load cell of your choice, cables, delivery in the Netherlands and Belgium, commissioning, and training. We offer a 2-year warranty. The VectorPro Lite software is available for an additional €1,000, and grips are not included in the price. Ppedpfx Ahox Apnte Hol

Year of construction: 2022, condition: used, functionality: fully functional, FPRO EX-Automatic Link Coner-72 Spindle Ppodpfeya Ed Tex Ah Hol 4 units available for this model

Condition: used, Year of construction: 2022, functionality: fully functional, 4 units available for this model Ppjdpfjya D Iqex Ah Hsl

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, control type: NC control, degree of automation: semi-automatic, actuation type: electric, coil inner diameter: 300 mm, coil outer diameter: 1,300 mm, coil weight: 1,500 kg, product width (max.): 550 mm, sheet thickness (max.): 3 mm, power: 2.5 kW (3.40 HP), input voltage: 200 V, input current: 3 A, input frequency: 50 Hz, Equipment: documentation/manual, Manufacturer: DATEC Type: DATEC MN7-550U Psdpfx Ahjyangko Hopl Year of manufacture: 2000 Max. sheet width: 550 mm Power: 3x200V, approx. 2.5kW Sheet thickness: approx. 0.3 – 3.2 mm Coil weight: up to 1–2 tons

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Mecman type: 167-05 5000-1 -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Stroke: 370 mm Pedpfed Stizjx Ah Hjpl -Number: 2x cylinders available -Price: per piece -Dimensions: 63/63/600 mm -Weight: 2.75 kg

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders Pjded S Aqaopfx Ah Hspl -Mecman type: 167-05 5000-1 -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Stroke: 160 mm -Dimensions: 95/95/H515 mm -Weight: 4.5 kg

Condition: used, Year of construction: 2014, Technical details: Punching capacity: 500 kN cutting capacity : 9,0 t control: Siemens Touch Panel S7 ram adjustment: 80 mm stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm Pjdpeu Nfttjfx Ah Hopl ram surface area: L x B 1100 x 400 mm passage opening in table: 950 x 100 mm table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Plant equipped with: 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm 2. controlled strip feeder (roller feeder) 3. press 1: Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) *

Condition: ready for operation (used), CNC Bed Type Milling Machine Make SECMU model C6 Table Size 2200 x 700 X travel 2000 Y travel 1200 Z travel 1000 ATC 60nos. complete with universal milling head Podpfjxdduwox Ah Hopl

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, operating pressure: 280 bar, type of input current: AC, tank capacity: 360 l, input voltage: 400 V, space requirement height: 1,600 mm, space requirement length: 1,400 mm, space requirement width: 1,400 mm, pump capacity: 68 l/min, rotational speed (max.): 1,480 rpm, Hydraulic Power Unit Manufacturer: Rexroth Mecman AB Model: A10V 0 45 DFR /31R-PSC62K01 Year of manufacture: 1998 Condition: very good (used) Functionality: fully operational Pump Manufacturer: Rexroth Pump Type: A10V 0 45 DFR /31R-PSC62K01 Maximum Pump Speed: 2,600 rpm Pressure Control: with hydraulic flow control, X-T open Direction of Rotation: Right, when viewing the drive shaft Flow Rate: 2 x 68 liters per minute at 1,450 rpm Operating Pressure: 280 bar Oil: ISO VG 46 Drive Power: 2 x kW Electric Motor Speed: 1,450 rpm Input Voltage/Frequency: 400 V / 50 Hz Tank Capacity: 360 liters Accumulator Capacity: 50 liters The unit is equipped with the following components: • Accumulator • Double filter unit with pump • Digital pressure transmitter • Dryer • Solenoid valves • Drip tray • Terminal box Dimensions (L/W/H): 1,400 mm / 1,400 mm / 1,600 mm Weight: 850 kg Variable displacement pump in axial piston swashplate design for hydrostatic drives in open circuit The flow rate is proportional to the drive speed and displacement volume Ppedpfx Ahex Szxlj Hel Stepless adjustment of the flow rate is possible via swashplate displacement 2 case drain ports Good suction characteristics Low noise level Long service life Favorable power-to-weight ratio Versatile range of control options Short response time The through-drive is suitable for mounting gear and axial piston pumps up to the same nominal size, i.e., 100% through-drive

Condition: used, This listing is for the Lec Medical ISU27C Refrigerator The unit is in full working condition and is ready for immediate use Lec Medical ISU27C Spark-Free Countertop Laboratory Freezer Ppedpfoxv Du Uex Ah Hjl Compact, Secure, and Safe Cold Storage for Laboratories and Medical Environments Key Features −18 °C to −20 °C Set Temperature Perfect for short-term sample storage in labs where space is limited. External Digital Controller Allows temperature readings without opening the door, reducing unnecessary internal temperature fluctuations. Spark-Free Design No internal electrical components, making it safe for storing volatile or reactive substances with no risk of ignition or explosion. Audible & Visual Temperature Alarms High/low alarms immediately alert nearby staff of unsafe temperature changes, allowing quick corrective action. Lockable Door with Two Keys Ensures accountability, security, and access control, especially critical for storing hazardous or valuable materials. Reversible Door Maximizes installation flexibility in tight or awkward spaces. Compact Countertop Design Ideal for environments where bench space is at a premium—including labs, clinics, and pharmacies (for non-vaccine use).

Condition: used, This listing is for a LEC Medical LSF151UK Freezer. The unit is in full working condition and is ready for immediate release. The LEC Medical LSF151UK is a robust laboratory freezer tailored for secure and reliable sample storage. Here are its standout features: Key Features: - Temperature Control: Maintains a steady temperature of -18°C and below, ideal for preserving sensitive biological samples. - Anti-Microbial Handle: Designed to inhibit bacterial growth, this feature significantly reduces the risk of cross-contamination between stored items. - Control Panel Lock: Safeguards against accidental adjustments to temperature settings, ensuring your samples remain at optimal conditions. - Open Door Sensors: Alerts users if the door is left ajar, helping prevent unwanted temperature fluctuations that could jeopardize stored materials. - Energy Efficient R600a Refrigerant: This environmentally friendly refrigerant not only minimizes your carbon footprint but also lowers operational costs, making it a smart choice for labs. - Adjustable Shelf Heights: Customizable shelf arrangements allow for efficient use of space, accommodating various container sizes—from small vials to larger boxes. - Advanced Controller: Users can easily monitor the minimum and maximum temperatures while managing the warning alarm system, giving peace of mind regarding temperature integrity. - Auto Defrost Feature: Automatically defrosts the freezer to maintain efficient cooling and reduce manual maintenance. - Spark-Free Design: Safe for environments sensitive to electrical sparks, ensuring compliance with safety regulations. Ppsdpfxexxyhpo Ah Hel - Compact Design: Fits perfectly under most workbenches, and the rear rollers assist with mobility for cleaning or repositioning.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Completely overhauled, stock item, 12-month warranty, not a solvent oven! - Max. temperature: 250 °C - Total steam space: 20.5 m³ - Useful dimensions (LxWxH): 2300 x 2750 x 2200 mm - Control system: Jumo Imago 500 - Heating capacity: 36 kW - Maximum loading capacity of furnace cart: 6000 kg, electrically driven - Electric supply and exhaust air dampers: Belimo - Exhaust fan controlled via frequency converter - Overall dimensions (LxWxH): 3000 x 3000 x 3125 mm plus rail in front of the oven - Dead weight: approx. 3500 kg - Free-standing control cabinet - Documentation Inspection available in our warehouse by appointment. Ppjdsttbf Uopfx Ah Hel Car bottom furnace, furnace, industrial oven, recirculating air oven, chamber circulation furnace, tempering furnace, heat treatment oven, drying oven, tempering oven, chamber oven, drying cabinet,

Condition: good (used), functionality: fully functional, Mixing process starts after sucking the air out of the mixer, which also allows the product to keep its natural taste, smell, color and extends its shelf-life. Top cover operated pneumatically. Manufacturer: Inotec Model: IM-2000 and IM-3000 Height: 2200 mm Width: 2000 mm Length: 4300 mm Pjdpfoxxl Etex Ah Hepl Capacity: 2000 L and 3000 L Electric power supply: 400V 50Hz 3N Total power: 30 kW (2000L), 35 kW (3000 L)

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, total width: 330 mm, total length: 570 mm, total height: 1,090 mm, overall weight: 70 kg, Equipment: documentation/manual, The Mecmesin OmniTest tensile/compression testing machine is a robust and precise single-column universal testing machine. Together with the VectorPro MT software, the OmniTest is an excellent choice for product research and materials testing. The sturdy and durable frame accommodates load cells ranging from 5 N up to 5 kN or 7.5 kN. Multiple load cells are available and can be quickly exchanged, allowing for tests to be performed across virtually any required range. Naturally, a wide range of testing setups is available. The tester is designed to deliver outstanding performance and ease of operation at an attractive price. Existing Mecmesin customers are already familiar with the reliable hardware, which is always robust and built for intensive use. VectorPro MT software is user-friendly and available in multiple languages, including Dutch. The intuitive graphical user interface enables any operator to quickly configure and perform tests. Delivery is limited to the Netherlands and Belgium. Key features include: – Simple operation – Load cells from 5 N to 7.5 kN – Software highly suitable for use with touchscreens – Multilingual software, including Dutch – Reporting to Excel, PDF, email, etc. – Various options such as extensometers available – 30 years of experience and satisfied customers – Includes 1-year warranty, commissioning, and training – We select the grippers together with you (not included) Podpox Apg Aefx Ah Hopl A PC (touchscreen) shown in the picture is optional.

Condition: excellent (used), functionality: fully functional, We are offering a top-quality CZW 1 video measuring microscope from HITEC Model: 250 x 170mm Podpfexwb Saox Ah Hepl M3 Software: automatic edge detection, tolerance checking according to DIN/ISO standards, element view with tolerance input, part view with dimensioning, live image display during measurement, additional image storage for your documentation Touch PC with Windows 7 Calibration certificate valid until 31.07.2025 The CZW1 product range supports you in performing highly accurate, repeatable measurements of complex workpieces made from any material. With numerous options such as a zoom lens, various Z-axis lengths, and a wide range of measuring table sizes, the CZW1 provides every possibility to meet your part-specific measurement requirements.

Year of construction: 1994, condition: good (used), Used M-Tec Ploughshare mixer Podpsir E E Esfx Ah Hopl Type MS-150 Batchmixer Minimal mixing volume 350 dm3 Maximum mixing volume 1500 dm3 Motor 37kW 115 rpm Incl. Sampling unit specicon

Year of construction: 2002, condition: good (used), bar length: 600 - 1.200 mm Sheet size: max 490 x 320 mm; min 220 x 150 mm Mechanical cycle time: min 24 s Effektive cycle time: min 30 s infeed height: adjustable 250 - 550 mm Log delivery height: 1.150 mm Paper weight (grammage): max 40 - 130 g/qm Electric supply: 400/50 V/Hz/A Air requirement (6 bar): 5 m³/h Weight: 4.100 kg (approx.) Pjdpfjq Ul S Tjx Ah Hepl Equipment delivery • delivery left • automatic wood inserter palletizer • pallet dispenser • transport rollers

Year of construction: 2002, condition: good (used), bar length: 600 - 1.200 mm Sheet size: max 490 x 320 mm; min 220 x 150 mm Ppodjq Ul Ugopfx Ah Hsl Mechanical cycle time: min 24 s Effektive cycle time: min 30 s infeed height: adjustable 250 - 550 mm Log delivery height: 1.150 mm Paper weight (grammage): max 40 - 130 g/qm Electric supply: 400/50 V/Hz/A Air requirement (6 bar): 5 m³/h Weight: 4.100 kg (approx.) Equipment delivery • delivery right • automatic wood inserter palletizer • pallet dispenser • transport rollers

Condition: ready for operation (used), functionality: fully functional, Submission of a bid obligates timely collection by 27.02.2026! MACHINE DETAILS Ppjdpsyfnwtefx Ah Hol Voltage: 230 V EQUIPMENT Robust construction Easy and hassle-free spindle head change Pneumatic two-hand control 6-spindle drilling head Useful special accessories for extended machining options

Condition: used, Year of construction: 2014, 2014 | DAF CF 85.410 with Cifa mixer | Used Concrete Mixer - Offroad 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Ppodpfjydpu Rjx Ah Hol 💰 Buy Now for EUR 63000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 2 inspection points 2 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Used 6x4 concrete mixer truck. Mixer hours: 6691. Mileage: 108 049km. Good tyres. Steel suspension. Drum brakes. Manual gearbox. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40257 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.