Used Haas for sale (242)

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1179736, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, faceplate diameter: 500 mm, Submission of a bid obligates the buyer to collect the item on time by the end of 2025! TECHNICAL DETAILS Travel X-axis: 762 mm Travel Y-axis: 508 mm Travel Z-axis: 508 mm Swivel range: +120 to -35 degrees Rotational range: 360 degrees Faceplate diameter: 500 mm MACHINE DETAILS Electrical data Dedpfox Agv Ijx Ab Tjwf Voltage: 440 V Phases: 3 Frequency: 50/60 Hz EQUIPMENT Two-axis rotary table Standard T-slots Precision alignment bore

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1165821, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 40, TECHNICAL DETAILS X-axis travel: 762 mm Y-axis travel: 508 mm Z-axis travel: 508 mm Max. spindle speed: 15,000 rpm Number of tool magazine slots: 40 MACHINE DETAILS Tool taper: CT 40 Electrical data Voltage: 440 V Phase: 3 Frequency: 50/60 Hz Djdexxxgqjpfx Ab Tewf EQUIPMENT Infinitely variable spindle speed Chip conveyor Internal coolant system

Year of construction: 2018, condition: ready for operation (used), Control Unit Brand HAAS Main Drive Spindle speed range 2400 rpm Spindle motor power 40 hp Number of axis 2 Tail Stock Djdpfx Ajx D I Ubeb Tswf Pinol tool taper MT5 Media Chip conveyor Yes Additional Equipment Line Filter & Surge Suppressor – 220 VAC, 3-phase, 80 A, 60 Hz Early Power-Failure Detection Module Belt-Type Chip Conveyor This HAAS ST-40 was manufactured in 2018. It features a 15-inch chuck, a maximum part swing of 35.5 inches, and a cutting diameter of 30 inches. The machine includes a 2-speed gearbox spindle, capable of 2,400 rpm, and a 12-station BOT turret. Additional equipment includes a belt-type chip conveyor and a programmable servo tailstock. Consider the opportunity to buy this HAAS ST-40 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2008, x-travel 1016 mm y-travel 660 mm z-travel 635 mm control Haas table surface area 1.372 x 610 mm table load 1.814 kg rapid traverse 18 m/min turning speed range 7.500 U/min power capacity - milling spindle 22,4 kW tool taper SK 50 | no. of tools in the magazine 30 Stück weight of the machine ca. 7,5 t Dwedpfxswvl Aij Ab Tsf dimensions 3,5 x 2,47 x 2,98 m Vertical Machining Center - chipconveyor - external handwheel - Dual tool change arm - internal coolant - filter - 4th axis, 1HRT 210 A with tailstock - Oil dust collector

Condition: good (used), Vertical machining center, Haas VF-3SS, year 2016, with internal cooling, rotary table, mist extractor... Dodpfxex El Uko Ab Tswf

Condition: like new (used), Year of construction: 2012, operating hours: 37 h, functionality: fully functional, turning length: 1,219 mm, spindle bore: 58 mm, spindle speed (max.): 1,800 rpm, travel distance X-axis: 203 mm, travel distance Z-axis: 1,219 mm, rapid traverse X-axis: 11 m/min, rapid traverse Z-axis: 11 m/min, rotational speed (max.): 1,800 rpm, total height: 1,982 mm, total length: 2,642 mm, total width: 1,422 mm, overall weight: 2,100 kg, Equipment: documentation/manual, rotational speed infinitely variable, With only 37 hours of "POWER ON TIME", this HAAS TL-2 is basically in brand-new condition! - Ideal for small toolrooms, large production environments, start-ups, and educational institutions. Dodsx Elg Tjpfx Ab Tswf - Suitable for manufacturing highly precise parts in sectors such as the automotive, aerospace, and electronics industries. The machine is equipped with: - Original coolant tank + pump - Double handwheel for Teach-In operation - Documentation - SCHUNK ROTA 3-jaw chuck Ø260mm Dimensions: approx. 2642x1422x1982 cm (LxWxH) Weight: 2100 kg

Condition: used, Year of construction: 2017, Technical details: Dodova Ar Dopfx Ab Towf x-travel: 1625 mm y-travel: 813 mm z-travel: 762 mm control: HAAS Automation spindle hours: 3127 h number of spindle speeds: max. 12.000 U/min. max. torque on the spindle: max. 122 Nm tool changer with: 30 + 1 Plätze table-size: 1626 x 711 mm max. table load: 907 kg spindle taper MT: SK40 spindle drive: 22,4 kW feed range: X/Y/Z: max. 21,2 m/min. rapid traverse:: X/Y/Z: 30,5 m/min interface: ja control voltage: 440 V air-pressure connection: 6,9 bar total power requirement: 22,4 kW Weight approx.: 10,2 t dimension coolant device: 2,5 x 1,2 x 0,9 m dimension machine xH: 4,8 x 3,2 x 2,9 m High-speed machining center Ball screws with double anchoring all axes with high-performance servomotors, directly connected to ball screw 2-stage gearbox Operation via control panel and manual control unit Chip conveyor/screw conveyor Cooling device Accessories: SK40 holder Ø finger cutter SK40 measuring finger and various small parts *

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 2134 x 1016 x 762mm, Table 2134 x 914mm, table load 1814 kgs, Spindle Speed 7500 rpm, Spindle taper BT40, Spindle Motor 30Hp, HAAS Control, 24 Station ATC, coolant, low volt light, swarf auger, Dedpfxsx D Ulms Ab Tjwf

Condition: ready for operation (used), Year of construction: 2020, Control Unit Brand HAAS Model NGC Dodjx Enh Tspfx Ab Tjwf Main Drive Number of axis 3 Movement X-Axis Movement 1270 mm Z-Axis Movement 635 mm Y-Axis Movement 508 mm This 3-axis HAAS VF-4 vertical machining center was manufactured in 2020. It features a 1270 mm X-axis, 508 mm Y-axis, and 635 mm Z-axis travel, supporting a table load up to 1588 kg. Equipped with a 20-station tool magazine, chip auger extractor, and a Renishaw OTS tool probe. Consider the opportunity to buy this HAAS VF-4 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2009, x-travel 1016 mm y-travel 660 mm z-travel 635 mm control Haas table surface area 1.372 x 610 mm table load 1.814 kg rapid traverse 18 m/min turning speed range 7.500 U/min power capacity - milling spindle 22,4 kW tool taper SK 50 | no. of tools in the magazine 30 Stück weight of the machine ca. 7,5 t dimensions 3,5 x 2,47 x 2,98 m Vertical Machining Center with 4th axis - chipconveyor - external handwheel - Dual tool change arm - internal coolant - filter - 4th axis, HRT 210 A Dodewvl Acepfx Ab Towf - prepared for cableless 3D touch probe - oil dust collector - tool measuring

Year of construction: 2014, operating hours: 5,316 h, condition: ready for operation (used), Main Drive Spindle speed range 4000 Spindle bore 52 mm Number of axis 3 Movement X-Axis Movement 213 mm Y-Axis Movement ±51 mm Z-Axis Movement 572 mm Turret Tool taper VDI/BOT Tools Number of station 12 This 3-axis HAAS ST-20Y was manufactured in 2014. It features a CNC lathe with C and Y-axis capabilities, a spindle speed of 4000 rpm, and a chuck size of 8 inches. Additional features include a 12-station turret, chip conveyor, and a programmable hydraulic tailstock. Ideal for precision turning operations. If you are looking to get high-quality turning capabilities consider the HAAS ST-20Y machine we have for sale. Contact us for more information about this machine. Application Types Turning Dwsdjx D Nzpjpfx Ab Tof

Condition: ready for operation (used), Year of construction: 2023, Control Unit Brand HAAS Main Drive Spindle speed range 15000 RPM Spindle motor power 22.4 kW Tool taper ISO40 taper Media Chip conveyor Yes Additional Equipment Djdpfx Ajx D S Apeb Tewf Chip Conveyor: Positioned above coolant tank with auto-reverse function This 5-axis HAAS UMC-500SS universal machining centre was manufactured in 2023. It offers advanced capabilities for complex and precise machining tasks. Consider the opportunity to buy this HAAS UMC-500SS universal machining centre. Contact us for more information. Application Types Milling

Year of construction: 2022, operating hours: 119 h, condition: ready for operation (used), Control Unit Brand HAAS Dsdox D Ik Nopfx Ab Tswf Model NGC Main Drive Number of axis 3 Spindle Speed 4000 RPM Spindle motor power 14.9 kW Movement X-Axis Movement 213 mm Z-Axis Movement 571 mm Y-Axis Movement 50 mm Technical Specification Driven Tools yes This 3-axis HAAS ST-20Y was manufactured in 2022, featuring X-axis travel of 213 mm, Y-axis travel of ±50 mm, and Z-axis travel of 571 mm. It includes a spindle bore of 64 mm and a three-jaw chuck diameter of 210 mm. The machine offers a maximum spindle speed of 4000 rpm and comes equipped with a chip conveyor, tool measuring probe, and a hydraulic tailstock. Consider the opportunity to buy this HAAS ST-20Y horizontal turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2017, operating hours: 238 h, General Data Machine weight 7212 kg Control Unit Brand HAAS Main Drive Spindle speed range 7500 Number of axis 3 Movement X-Axis Movement 1016 mm Y-Axis Movement 660 mm Z-Axis Movement 635 mm Table Outer length 1372 mm Outer width 610 mm Dwsdox D Itqepfx Ab Tsf Tools Slots in storage 30+1 This HAAS VF-3YT/50 Vertical Machining centre was manufactured in the year 2017 in the United States and has 238 production hours. It is equipped with a HAAS control unit and has 3 axis. The machine has a spindle speed of 12000 rpm. Application Types Milling

Year of construction: 2019, operating hours: 3,728 h, condition: ready for operation (used), Control Unit Brand HAAS Model NGC Dodpfx Asx D Hn Teb Tjwf Main Drive Spindle Speed 4000 RPM Spindle bore 88.9 mm Number of axis 4 Spindle motor power 149 kW Movement C-Axis Movement 360 º X-Axis Movement 213 mm Z-Axis Movement 572 mm Y-Axis Movement 51 mm Tools Slots in storage 12 Technical Specification Max. Bar Diameter 64 mm Driven Tools yes This HAAS ST-20Y lathe, manufactured in 2019, features a Y-axis, tailstock, automatic tool probe, and chip conveyor. With a spindle speed of up to 4000 rpm and driven tools supported by a C-axis, it offers strong capabilities for complex machining. If you are looking for a high-quality turning solution, consider the HAAS ST-20Y we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2017, operating hours: 4,757 h, General Data Measurements width 2794 mm Measurements depth 2235 mm Measurements height 2692 mm Machine weight 5670 kg Control Unit Brand HAAS Main Drive Spindle speed range 12000 Number of axis 4 Movement X-Axis Movement 1016 mm Y-Axis Movement 508 mm Z-Axis Movement 635 mm Workpiece Workpiece weight 794 kg Tools Max weight 5.4 kg Max tool diameter 76 mm Max tool length 330 mm This 4-axis HAAS VF-3SS vertical machining center was manufactured in 2017. It features a 1016 mm X-axis travel, 508 mm Y-axis travel, and 635 mm Z-axis travel. The table supports up to 794 kg, with dimensions of 1219 mm by 457 mm. It includes 24 tool pockets and achieves a maximum spindle speed of 12,000 RPM. Consider the opportunity to buy this HAAS VF-3SS vertical machining center. Contact us for more information about this machine. Application Types Milling Dwedpfxsx D Iy Do Ab Tef

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,300 h, Control Unit Brand HAAS Model NGC Main Drive Number of axis 3 Spindle Speed 8100 RPM Tool taper ISO 40 Movement X-Axis Movement 1016 mm Z-Axis Movement 635 mm Dwjdpfxsx D Hpde Ab Tef Y-Axis Movement 508 mm Table Table load 1588 kg Tools Max tool diameter 89 mm Slots in storage 20 Media Internal cooling yes This HAAS VF-3 vertical machining center, manufactured in 2017, offers strong milling performance with a large 1219 × 457 mm table and a load capacity of 1588 kg. It is equipped with an 8100 rpm spindle and includes a chip conveyor as well as a through-spindle coolant 21 bar option. The machine is in excellent technical condition. If you are looking for high-quality milling capabilities, consider the HAAS VF-3 we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, operating hours: 5,557 h, Control Unit Brand HAAS Main Drive Spindle speed range 8100 Dwsdpfxox D Hpke Ab Tsf Number of axis 3 Movement X-Axis Movement 706 mm Y-Axis Movement 406 mm Z-Axis Movement 508 mm Workpiece Workpiece weight 1361 kg This HAAS VF-2, manufactured in 2008, offers strong machining capability with 706 mm of X-axis travel, 406 mm on the Y-axis, and 508 mm on the Z-axis. Equipped with a spindle speed of 8100 rpm and a powerful 22.4 kW spindle motor, it is well suited for demanding milling applications. The visual and technical condition of the machine is very good for its age. Contact us for more information. Application Types Milling

Year of construction: 2019, operating hours: 3,934 h, condition: ready for operation (used), Control Unit Brand HAAS Dwedpfx Ajx D Nxhsb Tjf Model NGC Main Drive Spindle speed range 4000 Spindle motor power 14.9 kW14.9 kW Movement X-Axis Movement 213 mm Y-Axis Movement ±51 mm Z-Axis Movement 572 mm Media Chip conveyor Yes Additional Equipment ATP – Automatic tool probe Install Kit – Bar feeder installation kit with adapters for bar diameters 9–44 mm / Programmable, pneumatically operated finished part catcher (max. part dimensions: 108 mm x 54 mm, max. weight: 2.27 kg) CONVEYOR – Chip conveyor (belt type) LINER ADAPTER 2.00 – Haas liner adapter for spindle with bar diameter 2" (51 mm) HAAS Bar Feeder – Compatible with HAAS lathes (ST-10 to ST-35), for automatic bar feeding LT-6K-UP – Option to increase the speed of driven tools up to 6000 rpm PCAT – Pneumatic part catcher, programmable, for parts up to 96 mm x 152 mm PTS – Hydraulic tailstock This 3-axis HAAS ST-20Y was manufactured in 2019. A robust horizontal turning machine, it offers reliable performance for precision machining. Consider the opportunity to buy this HAAS ST-20Y horizontal turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 5670 Main Drive Spindle speed range 8100 Spindle motor power 22.4 kW Movement X-Axis Rapid Traverse 24.5 m/min Y-Axis Rapid Traverse 24.5 m/min Z-Axis Rapid Traverse 24.5 m/min Table Outer length 1219 Outer width 457 Tslots size 16 MM Number of tslots 15 Distance between 80 MM Min distance between vertical spindle and table 102 Max distance between vertical spindle and table 737 Table load 1588 KG Tools Slots in storage 15 Max weight 5.4 Max tool diameter 189 Dwsdpfxsx D N I Ne Ab Tef This 3-axis milling machine was manufactured in 2014. Equipped with a powerful 22.4 kW spindle and precise positioning accuracy of 0.005 mm, this HAAS VF-3 offers exceptional performance for machining tasks. Its 20-tool horizontal carousel magazine ensures efficient tool changes, while the 15" LCD color monitor enhances user interface. With a maximum table load of 1588 kg and rapid traverse rates of 25.4 m/min, buy this HAAS VF-3 milling machine for versatile and reliable production capabilities. Contact us for further information. Application Types Milling

Year of construction: 2010, condition: ready for operation (used), Main Drive Number of axis 2 Workpiece Workpiece drm over bed 806 mm Workpiece drm over support 527 mm Media Chip conveyor Yes This HAAS ST-30 was manufactured in 2010. A robust horizontal turning machine featuring a swing over bed of 806 mm, maximum cutting diameter of 533 mm, and a bar capacity of 76 mm. It includes a 254 mm 3-jaw chuck, tailstock, coolant system, and chip conveyor. If you are looking to get high-quality turning capabilities, consider the HAAS ST-30 machine we have for sale. Contact us for more information. Application Types Dwedpfx Abox D Hm No Tjf Turning

Year of construction: 2007, condition: ready for operation (used), General Data Measurements width 2000 mm Measurements depth 3300 mm Measurements height 2000 mm Control Unit Brand HAAS Main Drive Spindle speed range 3400 Spindle bore 76 mm Number of axis 2 Movement X-Axis Movement 287 mm Z-Axis Movement 864 mm Turret Number of turrets 1 Tools Number of station 12 Dwjdpjx D S Hbjfx Ab Tef Media Chip conveyor Yes This HAAS SL-30HE was manufactured in 2007. A robust horizontal turning machine featuring a turning diameter over bed of 762mm and a length of 860mm. It includes a VDI tool turret with 12 positions and a chip conveyor. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2015, Control Unit Brand HAAS Main Drive Spindle speed range 15000 Tool taper ISO 40 Number of axis 5 Movement X-Axis Movement 508 mm Y-Axis Movement 406 mm Dwodpfx Abex D I Dis Tef Z-Axis Movement 394 mm This 5-axis HAAS DM-1 vertical machining center was manufactured in 2015. It features a spindle speed of 15,000 rpm, a spindle drive of 11.2 kW, and a tool magazine with 18+1 tools. The rapid traverse rate is 61 m/min, enhancing productivity. If you are looking to get high-quality milling capabilities, consider the HAAS DM-1 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2020, condition: ready for operation (used), General Data Machine weight 4944 kg Control Unit Dwodpfx Abjx D El Rj Tsf Brand HAAS Main Drive Spindle speed range 3400 rpm Spindle motor power 22.4 kW Number of axis 2 Movement X-Axis Movement 239 mm X-Axis Rapid Traverse 24 m/min Z-Axis Movement 826 mm Z-Axis Rapid Traverse 24 m/min This HAAS ST-30 was manufactured in 2020. A robust horizontal turning machine featuring a chuck size of 254 mm, max cutting diameter of 381 mm, and bar capacity of 76 mm. It supports a spindle speed up to 3400 rpm with a power of 22.4 kW. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,452 h, Main Drive Spindle speed range 12000 Number of axis 3 Movement X-Axis Movement 1270 mm Y-Axis Movement 508 mm Z-Axis Movement 635 mm Dwedox D Embspfx Ab Tsf This 4-axis HAAS VF-4 vertical machining center was manufactured in 2017. It features a spindle speed of 12.000 RPM, a 22.4 kW spindle motor, and a table size of 1321mm x 495mm. It includes a 20-position tool changer, through-spindle coolant at 21 bar, WIPS-R probes, and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4 machine we have for sale. Contact us for more information. Application Types Milling