Condition: ready for operation (used), Year of construction: 2002, operating hours: 74,523 h, functionality: fully functional, machine/vehicle number: 06800001121, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS Travel, X-axis: 800 mm Travel, Z-axis: 300 mm Rapid traverse rate, X: 100 m/min Rapid traverse rate, Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy in point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Pjdpfxsy T Id Do Amkjgl Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 74,523 h Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2002, operating hours: 77,119 h, functionality: fully functional, machine/vehicle number: 06810000041, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Z-axis: 300 mm Rapid traverse rate X: 100 m/min Rapid traverse rate Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy at point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Psdpfoy T Iddjx Amksgl Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 77,119 h Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,977 h, functionality: fully functional, machine/vehicle number: MM0008-000192, turning length: 1,020 mm, turning diameter: 540 mm, travel distance X-axis: 565 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 1,050 mm, controller model: FANUC Series 31i-MODEL B, TECHNICAL DETAILS Turning length: 1,020 mm Turning diameter: 540 mm Swinging diameter over the machine bed: 750 mm Swinging diameter over the top slide: 540 mm Swinging diameter over the cross slide: 270 mm Travel range X-axis: 565 mm Travel range Y-axis: 170 mm Travel range Z-axis: 1,050 mm Rapid traverse rate X-axis: 36 m/min Rapid traverse rate Y-axis: 26 m/min Rapid traverse rate Z-axis: 36 m/min Power of the spindle motor: 22 W Spindle speed main spindle (max.): 5,000 rpm Spindle bore: 76 mm Spindle speed milling spindle (max.): 12,000 rpm Bar passage: 76 mm Bar diameter (max.): 65 mm Spindle nose: A2#6 Spindle diameter: 110 mm MACHINE DETAILS Control system: FANUC Series 31i-MODEL B Chuck outer diameter: 210 mm Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,850 x 2,525 x 2,805 mm Psdpey Tw Ulefx Amkogl Total weight: 12,000 kg Operating hours: 8,977 h EQUIPMENT Documentation/Manual

Year of construction: 2024, operating hours: 82 h, condition: like new (used), functionality: fully functional, Brand: DN Solutions Model: Lynx 2100A Type: CNC lathe Chuck Size: 6 inch Max Turning Diameter: Ø350 mm Max Turning Length: 330 mm Bar Capacity: Ø51 mm Spindle Speed: 6,000 rpm Spindle Power: 15 kW Spindle Torque: 127 Nm Spindle Nose: A2-5 Turret: 12 station Tool Size: 25 × 25 mm X/Z Axis Travel: 205 / 340 mm Rapid Traverse X/Z: 30 / 36 m/min Tailstock: MT#4 Pedoy U Dplepfx Amkjgl Control Unit: FANUC Machine Weight: Approx. 3,100 kg

Condition: used, Year of construction: 2017, INDEX C200 Mfd. 2017 Tooling in photos to be divided between 3 C200 machines available. Power-on hours: ~49,960 h Hydraulic hours: ~48,700 h Main spindle hours: ~24,800 h Counter spindle hours: ~24,000 h Stroke mm 20 Clamping pressure min.Max. bar 8/80 Piston Area pressure cm^2 57 Area piston thrust cm^2 57 pressure Force Max. CN 45,6 Tensile force Max. CN 45,6 10350989 1 INDEX C200 CNC-turning machine with 3 revolvers with Siemens-Based Index C200 control system SINUMERIK 840D SolutionLine - Rigid cast iron bed, perpendicular angle to the ground, excellent gradient chips - The kinematics of tool head movements guarantees maximum damping, reducing tool wear - Patented plate supports with excellent properties damping and stiffness The motion of the X-axis is derived through kinematics. "double scissors" guaranteeing high dynamics Pgodpfsy Um Rrex Amkel - Thermosymmetric spindle Control system Index C200 Identical to SIEMENS SINUMERIK 840d SolutionLine - Modular multiprocessor control system, SINAMICS with 120 drives - Siemens Operate control box, display in language Germany - language switching WINDOWS and flat screen - 2x USB 2.0 connection on the control panel, 2x USB connection on the control panel - NCU 720.3 B PN NCK - Integrated PLC 317-3 PNDP and ET200S - Security features implemented in software through SIEMENS Safety-Integrated and ProfiSave Extended machining cycles consisting of: Einstechzyklus Freistechzyklus Gewindestrehlen with 4 point move Lighting work. space in LED design 1 flat color TFT screen, 18.5" PCT-Touch IP65 front panel 10142338 1 Main spindle dia 65 Spindle end AD140mm, ID 85mm Material passage Max. mm 65 Speed max. 1 / min 5000 Front bearing diameter mm 110 Power 100% / 40% kW 31,5/32 Torque Max. 100%/40% Nm 125/170 Continuously synchronous variable speed drives Main spindle with hollow clamping cylinder D65/20 for pincer clamping or Chuck clamping Hydraulic control with clamp metering C axis of main spindle Drive: hollow spindle motor clamping cylinder, metering system directly on the spindle Resolution 0.00014 degrees Positionsstreubreite (VDI/DGQ 3441) Psmax = 0.01 degree 11040430 pressure clamping device Clamping pressure 8-75 bar adjustable For anti-spindle clamping cylinder 10038475 1 tool carrier 1 X-axis work vehicle mm 110 X-axis quick shift m / min 30 X-axis acceleration m / s^2 9 X-axis shear force N 5000 Z-axis work vehicle mm 320 Z-axis quick feed m / min 50 Z-axis acceleration m / s^2 9 Z-axis shear force N 5000 Y-axis working vehicle mm 100 Y-axis quick feed m / min 15 Y-axis acceleration m / s^2 9 Y-axis shear force N 5000 Offer: 1702114 - 02 / 30.3.2017 CNC-lathe INDEX C200 (GP3790. 0000F) Revolver 1: 14 stations with cylindrical shank clamping D25x48 (DIN 69880), W-grooves on the revolver-higher repeated accuracy when replacing the tool. Centering plate set, V-strips, not content of delivery, must be ordered separately. Gearshift revolver AC motor, hydraulic locking A driven tool is possible in each station of the revolver 1 . Power 25% kW 10 Torque 25% Nm 16 Speed max. 1 / min 8000 10720950 1 tool carrier 2 X-axis working vehicle mm 110 X-axis quick shift m / min 30 X-axis acceleration m / s^2 9 X-axis shear force N 5000

Condition: used, Year of construction: 2024, Tsugami B0205-VR CNC Swiss-Type Lathe Mfd. 2024 Hours: 73 NEVER RAN PRODUCTION! Pedpfxsy Um N Is Amksgl Accessories & Options: Fanuc 0i-TF Control Fire Trace Fire Suppression (5 lbs) B0-WORK-KIT MKIII Work Conveyor Through Sub-Spindle Coolant with Pump Abile Programming Software Edge Scout 320 Barfeed Two Channel Sets Specifications: Max Machining Diameter: .787" Max Headstock Stroke: 6.69" (Guide Bushing) / 1.771" (Chucker) Main Spindle Speed: 10,000 rpm Sub Spindle Speed: 12,000 rpm Live Tool Spindle Speed: 8,000 rpm Tool Positions: 21 Sub Spindle Max Machining Diameter: .787" Sub Spindle Front Ejection Max Length: 3.15" Max Tool Spindle Slotting Cutting Diameter: 1.18" Rapid Traverse Rate: 36M/min Main Spindle Motor: 7.5 hp | Sub Spindle Motor: 5.0 hp Coolant Tank Capacity: 47 gal. System Input Power: 13.0 KVA Compressed Air: 60 psi Dimensions: 69" x 41.5" x 67" | Weight: 3,968 lbs

Condition: used, Year of construction: 2009, greates pass round over bed 640 mm swing diameter over face slide 435 mm control Siemens SINUMERIK 810D pl Pgedpfx Amezaf Hnjkjl turning speed range 3 - 2.500 U/min centre distance 1.500 mm spindle bore 70 mm spindle diameter in front bearing 100 mm Lathe - cycle-controlled | VDF-BOERHRINGER - DUS 630 ti The machine is in good condition and can be inspected under power at any time. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DUS630ti | DUS 630ti | DUS 630 ti

Condition: used, Year of construction: 2012, turning diameter 350 mm turning length 650 mm control 840 D SL ShopTurn Siemens greates pass round over bed 385 mm Swing dia. over traverse guideway 350 mm turning speed range - main spindle 0 - 4.500 min/-1 power capacity - main spindel 11,5 / 8 kW max. Torque 340 Nm spindle diameter in front bearing 130 mm spindle bore 87 mm bar material dia. max. 65 mm max. chucking diameter 250 mm spindle head 170 h5 number of toolpositions 12 pos. Shank diameter DIN 69880: 30 mm Number of driven toolspositions 6 pos. Spindle speed - driven tool stations max. 4.500 min -1 power capacity driven tool-stations 5,5 kW x-axis 255 mm Psdpoy E Tvvefx Amkjgl z-axis 800 mm tailstock 680 mm taper of center MK 4 clamping capacity 6,8 kN feed speeds 0 - 30.000 mm/min rapid traverse ( X / Y / Z ) 30 / - / 30 m/min Feed force ( X / Y / Z ) 4,5 / - / 6,2 kN total power requirement 28 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 5,0 x 2,5 x 2,3 m CNC Universal Lathe GILDEMEISTER - NEF 400 V3 - C-Axis - Tool-Drive - only ca. 8093h Spindle hours - incl. 1x workbench - incl. 1x tool cabinet - incl. 1x cabinet for VDI tool holders - incl. 8x tool holders - incl. 4x driven tools (2 radial, 2 axial)

Condition: excellent (used), Year of construction: 2008, MAZAK CYBERTECH TURN 4500 M UNIVERSAL 4000 Max. swing diameter: 860 mm Max. machining diameter: 810 mm Max. machining length: 4,052 mm Max. milling speed: 3,000 rpm Max. spindle speed: 2,000 rpm Max. bar diameter: 185 mm Machine is equipped with: Pgsdezafdaspfx Amkjl - CNC control: Mazatrol PC Fusion CNC 640MT Pro - SMW 3-jaw chuck, diameter 610 mm - Tool Eye - C-axis - NC tailstock - Hydraulic SMW steady rest - Reinforced coolant pump - Chip conveyor, discharge to the side - Tool holder package for 12-position turret

Condition: good (used), Year of construction: 1990, Control system: Siemens 840-C Faceplate diameter: 1800 mm Swinging diameter: 2000 mm Pgsdpfjzadagex Amkjl Maximum turning height: 1100 mm (below tool) Table speed: 130 RPM Workpiece weight: 8000 kg Tool changer: 12 positions

Condition: used, CNC turning machine, TRAUB, type TND 400 Serial No. 708, year of manufacture 1996 CNC control system, TRAUB System TX-8 Nominal turning diameter: 400 mm Swinging diameter over the bed: max. 480 mm Turning diameter over the cross slide: 240 mm - Disc turret with 12 tool positions, VDI40 Pjdpfx Ajzacwdomkegl - Including 8 tool holders, VDI 40 - Including a large quantity of turning chuck jaws Good condition Machine is ready for demonstration.

Condition: good (used), Year of construction: 2001, Control: SIEMENS 840D Pgjdpszacfnefx Amkol Max. machining diameter: 2,800 mm Machining height: 1,000 mm Tool holder: CAPTO 6 Including chip conveyor and 2 supports

Condition: good (used), Year of construction: 2001, Control: SIEMENS 840D Machining diameter: 4,000 mm Machining height: 1,400 mm Cross slide travel: 850 mm Pjdpfx Aozacfbomkjgl Including chip conveyor and 2 supports

Condition: good (used), Year of construction: 1970, Centre height over bed: 2,100 mm Centre distance: 15,000 mm Faceplate (table) diameter: 3,500 mm Maximum swing diameter over faceplate: 3,120 mm Maximum swing diameter over bed: 4,150 mm Maximum swing diameter over carriage: 3,600 mm Maximum workpiece weight between centres: 180 t Bed width across guideways: 4,200 mm Bed height: 900 mm Bed length incl. headstock: 22,400 mm Spindle diameter at front bearing: 700 mm Tailstock quill diameter: 620 mm Faceplate speed range: 0.15 – 40 rpm Balancing device Electrical balancing via generator brake system and compensation weights in the headstock. Maximum balancing values per speed range: I: 7,500 kgm II: 2,850 kgm III: 1,250 kgm IV: 480 kgm The unit can be deactivated during standard turning operations. Crankpin machining group This unit is mounted on the support and enables: Minimum distance between spindle axis and centre of rotary ring: 700 mm Maximum offset for crankpin machining: 1,000 mm Psdpfxezacd Do Amksgl Steady rest Workpiece diameter: 500 – 1,000 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, Control: SIEMENS 840D PL ManualTurn turning diameter: 1.140 mm turning lenght: 4.200 mm turning diameter over slide: 800 mm faceplate diameter max.: 1.000 mm Support Length of the bed slide: 1.000 mm Travel of the cross slide: 650 mm Width of the cross slide: 425 mm bed width: 710 mm Main Spindle spindle bore: 120 mm spindle diameter in front bearing: 190 mm Podpozacdkofx Amkjgl Accessories 1 piece fix steady rest 10 pieces Multifix quick-change steel holder Typ D The machine has been general overhauled in 2007.

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 Pgedpozacc Tofx Amksl max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm Pgodpfx Amjzacctoksl adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Pedpjzacb Ajfx Amkjgl Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, table diameter: 4.000 mm swing diameter: 4.500 mm Psdpfx Amjzacbcokegl turning height: 1.600 mm Cross-section of tool slide: 250 x 250 mm power capacity: 1 x 100 kW max. rotational speed: 140 min/1 max. table load: 50 t 2 pieces of tool changers 40 slots per tool changer

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine Pjdpfx Amszabltjkjgl * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Psdpfx Amezaa T Njkegl Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Technical details turning diameter 815 mm turning length 3000 mm control ECS 2402 swing over bed 815 mm centre distance 3000 mm Pedpfx Ajzaa Nqjmkegl swing diameter over slide rest 485 mm spindle bore 137 mm spindle turning speed range 1200 U/min rapid traverse 5 m/min spindle motor 28 kW tailstock quill diameter 115 mm tailstock quill stroke 250 mm total power requirement 30 kW weight of the machine ca. 7,0 t dimensions of the machine ca. 5,87 x 2,10 x 2,10 m Additional information Equipment: * CNC-control E.C.S. 2402 * 3-jaw chuck * 4-jaw faceplate, diameter 700 mm * 4-jaw faceplate, diameter 400 mm * 3 Steady rests * Chip Conveyor Without boring bar holder and boring bar.

Condition: used, Year of construction: 2000, Technical details: turning diameter: 800 mm turning length: 2965 mm max. turning dia. over saddle: 520 mm spindle bore: 92 mm turning speed range: 3 - 1800 U/min spindle head: Größe 11 total power requirement: 37 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 5,2 x 2,2 x 1,9 m Teach In Control MTC-K Pedpsxxig Uofx Amkegl 3-jaw chuck ROTAS Dia. 400 mm face plate RÖHM Dia. 630 mm 4-station toolholder system PARAT 1 fixed steady coolant attachment and chip conveyor *

Condition: used, Year of construction: 1996, Technical details: turning diameter: 500 mm turning length: 1500 mm turning diameter over bed slide: 290 spindle bore: 71 mm turning speed range: 3 - 2800 U/min rapid speed: 10 / 5 m/min Podpfewwlvlox Amkegl feed speeds: 1 - 2000 mm/min total power requirement: 22 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 3,0 x 1,6 x 2 m with Teach In controll R&D MTC-K PARAT toolpost 1 fixed steday dia. 100 mm 4 jaw face plate dia. 500 mm coolant attachment *

Condition: used, Year of construction: 1998, Technical details: turning diameter: 830 mm turning length: 4000 mm turning diameter over bed slide: 540 mm spindle bore: 130 mm turning speed range: 2 - 1600 U/min rapid speed: 4 / 5 m/min feed speeds: 1 - 2000 mm/min Pedpfxjwwlt Rs Amkogl total power requirement: 55 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 7 x 2,2 x 2 m with Teach In controll R&D MTC-K MULTIFIX toolpost size D coolant attachment *