Used exhaust systems for sale (65)

Condition: good (used), Year of construction: 2017, machine/vehicle number: 17002702, Offer 25276 Extraction Filter System / Stationary Filter Unit with Wet Separator Technical Data: - suitable for moist, sticky dusts, metallic grinding - with heavy spark generation - single and multi-station extraction - volumetric flow approx. 5,150 m³/h Hjdpfx Ahox Upd Ue Nsng - water capacity 390 l - drive power 400 V / 7.5 kW - required space W 1250 x H 3650 x D 1100 mm - weight approx. 550 kg

Condition: used, type of input current: three-phase, input voltage: 380 V, suction capacity: 1,250 m³/h, power: 0.5 kW (0.68 HP), negative pressure: 200 Pa, operating temperature: 50 °C, Electrostatic oil mist exhauster. Hjdpfox Tzlujx Ah Neng

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. Hsdehp S Trspfx Ah Nong The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: good (used), Year of construction: 2011, functionality: fully functional, TEKA Filtercube 4H dry extraction system airflow: 6000 m³/h max. static pressure: 3000 Pa motor power: 7.5 kW 400 V 50 Hz Hjdpfsx Taqiex Ah Neng 15.5 A IP54 weight: 380 kg year of manufacture: 2011

Condition: used, Year of construction: 2014, type of input current: three-phase, input voltage: 400 V, overall weight: 700 kg, volume flow: 5,150 m³/h, suction capacity: 5,150 m³/h, noise level: 89 dB, input current: 14 A, power: 7.5 kW (10.20 HP), negative pressure: 3,690 Pa, input frequency: 50 Hz, ambient temperature (min.): 5 °C, protection type (IP code): IP6K0, ambient temperature (max.): 40 °C, We are offering this used ESTA NA-K 6000 B extraction system, year of manufacture 2014. Voltage: 400 V Number of phases: 3 Frequency: 50 Hz Power: 7.5 kW Current: 14.4 A Sound pressure level: 89 dB(A) Pre-filter: 32 µm Protection class: IP 6X Maximum airflow: 5,150 m³/h Maximum negative pressure: 3,690 Pa Water capacity: 290 l Weight: 700 kg Year of manufacture: 2014 Operating temperature range: +5 to +40 °C If you have any questions or require further information, please feel free to send us a message or call us. This unit was used for the extraction of grinding dust/mist in connection with grinding processes (including grinding robots/grinding cells) and is ideal for reliable wet dust collection of particles. ✅ ATEX/DEKRA certification present (visible sticker) ✅ Heavy-duty industrial design, suitable for continuous operation ✅ Excellent addition/bundle for grinding cells (Krugmann/robotic systems) Technical data (available): Manufacturer: ESTA Apparatebau GmbH & Co. KG Model: NA-K 6000B Year of manufacture: 2014 Power: 7.5 kW Connection: 3~ 400 V / 50 Hz Current consumption: approx. 14.4 A Weight: approx. 700 kg Hjdpfox Stb Eex Ah Nong Inventory No.: 03375 Scope of delivery / Collection: Delivery as shown in the photos. Collection from site. Dismantling/loading by purchaser or as per agreement.

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas suction fan -Manufacturer: Coral, dry grinding dust extraction filter system type GRINDEX -Power: 0.75 kW / 2810 rpm -Individual components/technical data: see photos Hnodpfsrw A U Ijx Ah Njg -Dimensions: 855/750/H1085 mm -Weight: 120 kg

Condition: used, Year of construction: 2021, functionality: fully functional, • Machine Type: Industrial Filtration and Extraction System • Product Designation: Filter Unit PPF25-1422vi ATEX & HPRec-A325 • CE-certified: Yes (CE marking visible on the nameplate) Manufacturer • Manufacturer: HEAB Absaugtechnik GmbH • Manufacturer Address (as stated on the nameplate): Quarzring 2, 04600 Altenburg, Germany Part 1: Identification • Model designation: PPF25-1422W ATEX • Serial number: 2021046 • Year of manufacture: 2021 (05/2021) Electrical Data (nameplate) • Motor power: 11 kW • Supply voltage: 3Ph / N / PE, 400 V • Frequency: 50 Hz Fan and Performance Data (nameplate) • Fan type: KHLE 17-450-5V-11-2-R0 • Airflow rate (AP): 4,000 m³/h • Maximum negative pressure: 1,500 Pa Filtration System (nameplate) • Filter area: 163 m² • Filter type: 3 × 225 × 600 mm 22 × 225 × 1,400 mm Hjdpfxjx Iul De Ah Njng Explosion Protection (nameplate) • ATEX classification: ATEX • Explosion protection marking: Ex • Maximum housing overpressure: 0.2 bar (gauge) • Explosion pressure relief device: Type: High-speed venting VN735 Part 2: Model: HPrec-A325 Machine type: Filter unit Year of manufacture: 05/2021 Serial number: 2021044 Technical Data / Specifications Motor power: 0.37 kW Electrical connection: 400 V / 50 Hz / 3 Ph / N / PE Fan type: VT500 O2 Speed: 2,800 rpm Airflow rate (AP): 400 m³/h Max. negative pressure: 1,000 Pa Filter media: Pre-coating material: Limestone powder Filling volume: 75 kg (3 x 25 kg) Compressed air supply: 6 bar (dry and oil-free)

Condition: new, Year of construction: 2025, 3000 m³/h Hnsdow Nblfopfx Ah Nog power capacity 2,2 kW Speed 3000 U/min. 200 mm Dimensions (L/W/H) 1250x700x2000 mm Weight 160 kg

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² Hnedpfx Aekm Ryneh Neg 72 dB(A) 400/50 V/Hz 665 x 820 x 1365 mm 165 kg mobile extraction, welding fume extraction (manual cleaning by loss of pressure) - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Aluminum in case of heavy smoke development. She corresponds to the Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan ensures a high volume flow even with saturated filter cartridges. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: ready for operation (used), Table size: 900 x 500 x 550 mm height Electrical connection: 380 V Hnedpfx Ahsx Ebh Ro Njg Required space: 1050 x 1050 x 1800 mm height Weight: 180 kg

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, overall weight: 200 kg, total width: 800 mm, total length: 1,000 mm, total height: 2,200 mm, volume flow: 2,600 m³/h, suction capacity: 2,600 m³/h, noise level: 79 dB, warranty duration: 12 months, power: 3 kW (4.08 HP), Extractor for double miter saws or saws used in aluminum processing Very powerful and quiet extraction system with noise levels below 80 dB! Hjdpfxewii Hxo Ah Neng 2600 m³ per hour suction capacity 3 kW motor Extractor includes a 14-meter hose with two outlets

Condition: good (used), Year of construction: 2011, Compact dust extractor, dust extractor, dust extraction blower, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, filter system Cartridge dust extraction system, clean air system, clean air dust extractor -Filter system: Höcker Polytechnik Vacomat 200 XPE mobile dust collector -Nominal flow rate: 2260 m³/h -Exhaust fan: 3.7 kW Hnedpfoxu Dybox Ah Neg -Intake manifold: Ø 200 mm -Individual components: electric filter cleaning, 3 chip containers, see photos -Dimensions: 890/2620/H2120 mm -Weight: 440 kg

Condition: used, Year of construction: 2017, operating hours: 20,700 h, type of input current: three-phase, overall weight: 1,600 kg, total width: 2,100 mm, total length: 1,800 mm, total height: 3,700 mm, suction capacity: 20,000 m³/h, Novus AirTower FT0120018 EC filter ventilation tower - 20,000 m³/h Industrial hall filter ventilation for welding halls — suitable for numerous technological processes in manufacturing facilities, mainly those involving metalworking. Extremely low energy consumption thanks to innovative fans. Features energy-saving EC fans instead of standard fans, providing SIGNIFICANT savings by minimizing electricity usage. The EC fan with integrated inverter enables precise control of fan speed, energy consumption, and device efficiency. Adjustable operating range: 60%, 80%, or 100%. Air intake from the top with draft-free air discharge at floor level — precisely at workstations. Layered filter ventilation system; no need for pipeline installation. Self-cleaning cartridge filter elements — cleaned automatically by compressed air pulses during operation. Hodpoxxalnofx Ah Nsng Filter cleaning is based on differential pressure, ensuring no compressed air losses. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air with no drafts, at a velocity below 1.2 m/s — directly where employees breathe, covering a broad 270-degree area. The AirTower operates in accordance with the layered ventilation method recommended by professional associations, considered the optimal form of air circulation. Year of manufacture: 2017 Operating hours: 20,700 Specifications: - 4 EC fans, each with 3.9 kW power - Airflow rate: 20,000 m³/h - Filter surface area: 222 m² - 6 cartridge filter elements - High-efficiency final filter - Fire protection package - EC Blue Energy Package - Hall dust sensor — LED-indicated, transmits dust concentration data to the AirTower to adjust device output automatically. Enables energy savings based on current dust levels in the hall. Very quiet operation Stock no.: 1066

Condition: new, Year of construction: 2025, 5000 m³/h power capacity 5,5 kW Hnedpfxow Nbk Uo Ah Nsg Speed 3000 U/min. 280 mm Dimensions (L/W/H) 2460x1250x1600 mm Weight 380 kg

Condition: new, 400 V / 50 Hz < 75 dB(A) power capacity 15 kW volume capacity 20.000 m³/h weight 1590 kg Modular plug & play airtower for hall extraction of welding fumes with integrated, soundproofed Fan, automatic, differential pressure controlled Filter cleaning, system control with color display, particle pre-separation and IFA - tested filter cartridges. The system is for a volume flow of average 20,000 m³ / h designed 1st filter stage - main filter: Filter area: 222 m² Number of filters: 6 pieces Dust class according to DIN EN 60335-2-69: M. Degree of separation:> 99.9% Cleaning: Jet - Pulse Compressed air connection: NW 7.2 mm, 4-6 bar, oil and water free 2nd filter stage - fine dust filter. Filter area: 65 m² Filter class according to ISO 16890: ISO ePM1 80% 3rd filter stage - Synthetic fiber mats: Filter area: 8 m² Filter class according to ISO 16890: ISO coarse 60% Total filter area: 295 m² Dimensions: Width filter unit: 2,066 mm Depth filter unit: 1,756 mm Height of filter unit: 3,643 mm Hjdpfoppgd Esx Ah Nong Dust container: 200 liters Version Sanders incl .: - NOVUS efficiency package FT20.000 - timer - NOVUS particle sensor

Condition: excellent (used), Volume flow 3000 Pressure 3400 Pa Hedpsilug Sefx Ah Njng Filter 30 m2 Spindle speeds 2850

Condition: excellent (used), Year of construction: 2015, 1 x Oil Mist Extraction Unit LTA Basic Line 01 Year of manufacture: 2015 In very good condition. Hnjdpfx Aoxy R Shjh Neg Technical data: Power: 780 VA Voltage: 230 V Weight: 85 kg The extraction unit can be inspected under power.

Condition: excellent (used), Year of construction: 2000, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system -Filter system Hnedjw Nhbmopfx Ah Njg -Filter frame: 2135/2135/H2030 mm -Vibration motor: 0.55 kW -Funnel frame: 2100/2130/H2330 mm -Discharge gear motor: 2.2 kW 8.7 rpm -Opening: Ø 250 mm / 250 x 220 mm -Individual components: see photos, without extraction fan -Weight: 320 kg / 890 kg

Condition: used, Axial high-performance fan, Axial fan AEG Wall-mounted fan for extraction or ventilation Type AG 80 NY6 No. 4268465 Airflow approx. 11,000 m³/h Hnsdpfx Ahjxciw Ij Neg 6-blade fan Ø 600 mm Internal mounting frame Ø 645 mm External mounting frame Ø 900 mm Installation depth 190 mm Motor power 0.55 kW Power supply 400 Volt, 50 Hz - 6-bladed profiled impeller with bionic blade geometry - Fan blades made of aluminium - Fan housing made of metal with wall mounting ring (galvanized sheet metal) - Metal stand with protective guard, custom-built - Mobile Dimensions L x W / H: 1200 x 870 x 1520 mm Weight approx. 90 kg The high-performance fan is in very good condition.

Condition: new, Model Name Hodpfegvqzcex Ah Nong Airtower FT 20.000

Condition: good (used), Year of construction: 2006, Filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, suspended matter filter -Manufacturer: WW, oil mist separator filter system type ME-FI 600 -Voltage: 230V / 0.15 kW -Filter: without filter -Quantity: 1 piece available -Dimensions: 710/390/H445 mm Hnedpfxjiz Udws Ah Njg -Weight: 38 kg

Condition: used, Centrifugal fan KASTRUP Fabric No. 27688/1 Year of construction approx. 1985 Volume flow approx. 4000 m3/h Intake pipe Ø 250 mm Exhaust air connection 400 x 120 mm Motor speed 1440 rpm Motor power 5.5 kW Mains connection 380 Volt, 50 Hz. - Metal housing Space requirement L x W x H 1100 x 900 x 1220 mm Weight approx. 150 kg Good condition Hodedz Sqwopfx Ah Nsng

Condition: used, Year of construction: 2008, 1200 m³/h 1600 Pa 1,1 kW 24/50 V/Hz 750 x 700 x 1050 mm 90 kg Equipment: - Hose arm 3 m, internal joints Hsdpfx Ahjw Tngqj Njng

Condition: used, Centrifugal fan REITZ type MAE Serial no. 601438 Year of construction 2017 Volume flow 10200 m³/h = 170 m³/min. Pressure p 1.2 kg/m³ Air inlet Ø 300 mm (nozzle diameter in the base plate) Air outlet 345 x 345 mm Motor speed 2940 rpm Motor power 18.5 kW Mains connection 400 Volt 50 Hz - Fan wheel with 8 fan blades - Directly flanged drive motor - Flange dimensions for air outlet 450 x 450 mm Hedper H Sqvjfx Ah Neng - Sturdy metal housing made of 8 mm steel Space requirement L x W x H 1930 x 1240 x 950 mm Weight centrifugal fan 500 kg very good condition, only test run completed

Condition: used, Radial fan with sheet metal housing, type H15 /400-M Serial no. 27265 Year of manufacture 1977 Inlet pipe Ø 200 mm Hjdpfxsxcitvo Ah Njng Outlet pipe Ø 110 mm Impeller diameter approx. Ø 700 mm Impeller width approx. 90 mm Airflow 0.25 m3/s = 900 m3/h Total pressure difference 4000 N/m2 = Pg: 400 kg/m2 Specific gas weight at 20°C 1.2 kg/m3 Temperature range max. 70°C Motor speed 2850 rpm Motor power 2.2 kW Mains connection 400 V, 50 Hz - Sheet metal housing - sturdy metal base Required space (L x W x H) 740 x 520 x 1540 mm Weight approx. 80 kg in good condition