Vertical turning lathe

Gildemeister CTV 200

Condition: ready for operation (used), Year of construction: 2004, operating hours: 63,778 h, functionality: fully functional, machine/vehicle number: 06800002061, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS X-axis travel: 800 mm Z-axis travel: 300 mm Rapid traverse rate X: 100 m/min Rapid traverse rate Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter in the front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy in point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Nedpfx Asy T Ikkohkslf Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump output: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 63,778 h Note: The machine is sold including a small set of accessories!

Condition: used, Year of construction: 2005, x-travel 600 mm y-travel 500 mm z-travel 600 mm control iTNC 530 Heidenhain table surface area 900 x 500 mm spindle turning speed - stepless 0-12.000 U/min Nlsdpfjvxwq Esx Ahkjf spindle drive 10 kW tool taper SK40 DIN 69871 tool magazin: 24 total power requirement 22 kW weight of the machine ca. 6,4 t dimensions of the machine ca. 5,3 x 3,5 x 3,5 m Chip conveyor scraper belt Coolant system 3 pumps / cartridge filter Grundfoss high-pressure pump type CRK2-220/22 A-W-A-AUUV

Condition: ready for operation (used), Year of construction: 2002, operating hours: 74,523 h, functionality: fully functional, machine/vehicle number: 06800001121, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS Travel, X-axis: 800 mm Travel, Z-axis: 300 mm Rapid traverse rate, X: 100 m/min Rapid traverse rate, Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Nlsdpsy T Id Dofx Ahkof Torque, holding torque brake: 240 Nm Accuracy in point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 74,523 h Note: The machine is sold including a small set of accessories!

Condition: used, Year of construction: 2011, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 1,200 mm, total length: 13,700 mm, total width: 10,000 mm, total height: 5,300 mm, KEKEISEN PFW-T 4000/12 portal milling machine in heavy-duty, rigid design for machining large and heavy workpieces. Travel distances of 4,000 x 2,700 x 1,200 mm and a large worktable measuring approx. 4,000 x 1,800 mm with a table load capacity of 10,000 kg enable the machining of high-volume components. Nodpfoy Ncgfsx Ahkelf The machine is equipped with a universal milling head featuring 2 swivel axes and 5 adjustable positions (manual or optionally NC-controlled). Hirth gearing ensures precise angular positioning. Powerful main spindle drive with approx. 30 kW (partially 37 kW), speed range 20–2,000 rpm, optionally up to 4,000 / 7,000 rpm, and a maximum torque of approx. 1,787 Nm – ideal for heavy-duty machining. Further features include a 60-position tool changer (KWE60), chip conveyor, KNOLL filtration system, Hydac cooling units, and centralized lubrication. Feed rates up to 4 m/min, rapid traverse up to 18 m/min, and feed forces of approx. 30,000 N per axis underline the robust construction of the machine.

Condition: used, Year of construction: 2008, travel -x axis 2.100 mm travel -z axis 1.400 mm travel -y axis 1.200 mm control HEIDENHAIN - iTNC 530 Nsdpfx Ahjzlkwzskslf numbers of positions in the tool changer 92 tool taper SK 50 BIG PLUS max. tool length 600 mm max. tool diameter 250 mm max. tool weight 20 kg rotary table dia. 1.700 mm max. swing dia. 1.800 mm total connected load 100 A 5-axis simultaneous machining center | REIDEN - BFR-22 equipped with 2-axis swivel head (A+B), NC - rotary table, 92-way tool changer, double gripper, ITC and chip conveyor. Scope of delivery: - probing system The machine has been regularly maintained by the REIDEN factory service team. In recent years, extensive repairs have been carried out and numerous wear parts have been replaced, including a complete overhaul of the milling head with a new intermediate shaft and bearings, as well as various electrical components. As a result, the machine is in a technically well-maintained and fully operational condition. It can be inspected under power upon request. Please refer to further technical details in the attachement of the offer. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: BFR 22 | BFR22

Condition: used, Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 5,000 rpm, HEIDENHAIN iTNC 530 CNC X-AXIS TRAVEL: 3000 MM Y-AXIS TRAVEL: 1400 MM Z-AXIS TRAVEL (Vertical): 1500 mm SPINDLE SPEED: 5000 RPM SPINDLE NOSE ATTACHMENT: SK 50 TABLE MEASURES: 3200 X 1100 MM TABLE LOAD CAPACITY: 10,000 KG Nodpexvrrhjfx Ahkjlf 24-Place Tool Changer No. 02 Chip Conveyors Automatic Indexed Head a axis 2,5 ° b axis 3 ° YOM 2008

Condition: good (used), Year of construction: 2004, HSK 63 18.000 rpm Parts shown by hand not come. Njdpsznmifefx Ahkolf

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,250 mm, table load: 2,500 kg, rotational speed (max.): 3,000 rpm, overall weight: 10,000 kg, CNC Heidenhain TNC 530 Maximum spindle speed: 3000 rpm Automatic tool changer SA 50 Power: 22 kW Tool changer Travel: 2000 x 1000 x 1250 mm Chip conveyor Njdpfx Ahjy Nnunokelf Machine weight: 12,500 kg

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,050 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 1,100 mm, table load: 10,000 kg, table length: 3,300 mm, Tool holder: ISO 50 Nlsdpfx Asy Rz Siohksf automatic B-axis manual C-axis

Condition: excellent (used), Brand: CORREA Model: CF-22 PLUS Cnc: HEINDENHAIN 530 Nlodpfoyxr Azex Ahkjf Table dimensions : 2.000 x 700 mm Number of slot: 5 Slot dimensions: 22 mm Axis travels (X,Y,Z) : 2.000 x 800 x 800 mm Head type : Universal manual Tool camping : Hydraulic Taper : ISO 50 (DIN 69871) Speed range : 4.000 rpm Spinale power : 22 kw Rapid feeds : 12.000 mm/min Maximum weight on table : 4.000 kg Machine dimensions : 6.605 x 3.315 x 2.730 mm Machine weight : 10 tn Machine equipped with : Fairing Chip conveyor Electronica handwheel