Condition: used, Year of construction: 2021, turning diameter 400 mm turning height 300 mm swing diameter 520 mm workpiece weight 60 kg x-axis 995 mm y-axis +/-30 mm z-axis 580 mm chucking diameter max. 500 mm Tool drive speed max. 6.000 1/min Main spindle drive power 37 KW tool turret with 12 work positions BMT75 total power requirement 55 kW weight of the machine ca. 13,5 t Circulating workpiece transport system, O-design Drag frame system for 10 workpieces Coolant supply: 15 bar Coolant pump with a flow rate of approx. 80 l/min at 15 bar. Cooling unit (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are maintained at ambient temperature (10°C - 40°C). Dual coolant filter, manually switchable Filter mesh 100 µm, with electrical and mechanical contamination indicator Chip conveyor Hinged belt design: to the rear Chip discharge height 1,100 mm. (with integrated coolant reservoir, capacity approx. 500 l) Emulsion mist extraction: Extraction capacity approx. 800 m3/h Flushing gun Workpiece measurement with measuring probe Blow-off measuring probe Tool life monitoring (sister tool management) Tool breakage monitoring TOOLINSPECT MCU-EUROPA Axial drilling and milling head - BMT75 CC 5x 90° angle drilling and milling heads - BMT75 CC (i=1:1) Tool set for OP10 + OP20 Hydraulic full clamping cylinder size 150 - with 1 media feed-through Hfsdpfx Agjx H Aibs Djr Max. tensile force 10,850 daN at 70 bar Coolant through the spindle Programmable clamping pressure adjustment 3-jaw power chuck KNCS-N 500-155 quick-change Max. = 2,200 rpm (standard speed according to DIN 6386) Set of hard base jaws Set of soft top jaws Attachments for KNCS-N 500-155 Flushing nozzle in chuck bore Additional tool holders with tools: 1x 8.BMT25VL8IKX50 External finishing cutter 1x 8.BMT25VL8IKX50 External roughing cutter 1x 60.7516VL8IKDI15 Engraving tool 1x 60.7516VL8IKDI15 Tapping chuck 1x 40.75V5KRVL8IKD 50mm cutter head 3x 80.75V5VL8IKD boring bar holder 2x 27.V520HYDL26 drill bits, 20mm diameter 1x 42.V522L08Ik drill bits, 22mm diameter 1x 27.V514WNL31 Drill Bit Diameter 14mm Software Package Operating Instructions / Maintenance Manual

Condition: used, Year of construction: 2014, CNC turning and milling center (9 axes) with Y-axis, B-axis, sub-spindle, and tool turret CNC control FANUC 31iTA with Manual Guide i Swing diameter over bed: 750 mm Swing diameter over cross slide: 600 mm Collision-free turning diameter: 210 mm Max. turning diameter main spindle: 540 mm Max. turning length: 1,520 mm Main spindle left and right (sub-spindle) Chuck diameter: 210 mm Spindle bore: 76 mm Bar capacity: 66 mm Speed range up to: 5,000 rpm Max. torque: 318 Nm Turning/milling spindle (swivel head, B-axis) Speed range up to: 12,000 rpm Torque: 81 Nm Drive power: 18.5 kW Positioning: 0.001° Swivel range: 240° (+120°) Tool magazine ATC Number of magazine stations: 40 Tool holder: CAPTO C6 Lower turret Tool stations: 12 Drill holder diameter: 40 mm Tool shank cross-section: 25x25 mm Tool holder type: BMT 55P Motor drive power: 5.5 kW Hsdpox Hy R Nofx Ag Defr Tool speed: 5,000 rpm - Chip conveyor - Parts removal with conveyor belt - Tool measurement arm - Internal coolant supply through sub-spindle - Chuck cleaning - Air/water through turret - Knoll compact filter unit - Automatic workpiece measurement

Condition: used, Year of construction: 2007, MAZAK QTN 250IIM, year 2007, MATRIX control C-axis, driven tools Turning length: 1000 mm Chuck: 10 inch Spindle bore: Ø 77 mm Max. turning diameter: Ø 380 mm Spindle speed: 35–4000 rpm Spindle nose: A2-8 Spindle power: 26 kW 12-position turret – all stations driven Driven tools: 4500 rpm – 5.5 kW Tailstock Tool measuring probe Hfjdpfjx Hxzgjx Ag Dsr Chip conveyor Specification PDF below

Condition: ready for operation (used), Year of construction: 1998, operating hours: 7,984 h, functionality: fully functional, machine/vehicle number: 1408, turning length: 250 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, bar passage: 65 mm, controller model: Okuma OSP7000L, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning diameter: 340 mm Maximum turning length: 250 mm Main Spindle Technology: Motor spindle Speed: 4,500 rpm Power (max.): 22 kW Bar capacity: 65 mm Workpiece clamping: 3-jaw chuck, Kitagawa B-210 Tool Turret I (X/Z) Technology: 12-station turret Tool holder: VDI40 Travel in X: 260 mm Travel in Z: 640 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min Tool Turret II (X/Z) Technology: 8-station turret Tool holder: VDI40 Travel in X: 140 mm Travel in Z: 615 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min MACHINE DETAILS Control: Okuma OSP7000L Dimensions & Weight Dimensions (L x W x H): 3,305 x 2,100 x 1,927 mm Weight: 4,800 kg Electrical connection data Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Power consumption: max. 30 kVA Total current: 43.4 A Motor current: max. 106 A Operating Hours Power-on hours: 36,348 h Hfedpjx Hx Dnefx Ag Der Cutting time: 7,984 h Spindle run time: 8,674 h EQUIPMENT Chip conveyor Coolant pump Automatic measuring arm Transformer

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 123, spindle speed (min.): 200 rpm, spindle speed (max.): 10,000 rpm, total height: 2,200 mm, total length: 9,000 mm, total width: 1,500 mm, overall weight: 5,000 kg, controller manufacturer: FANUC, controller model: SERIES 32i-MODEL B, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI B0266E-II CNC Automatic Lathe - Operating voltage: 200 V - Frequency: 50 Hz - Rated current: 21.4 A - Max. bar capacity: 26 mm - Max. machining length: 320 mm (synchronously driven guide bushing) - Without guide bushing: 50 mm - Max. drilling diameter: 12 mm - Max. tapping diameter: M10 - Deep hole drilling diameter: 10 mm - Max. clamping diameter sub-spindle: 26 mm - Max. drilling diameter sub-spindle: 10 mm - Max. tapping diameter sub-spindle: M10 - Max. drilling diameter tool spindle: 8 mm (front/rear tool holder) - Max. tapping diameter: M6 (front/rear tool holder) - Max. slot milling cutter diameter at tool spindle: 45 mm - Rotating guide bushing: 200 - 10,000 rpm (synchronously driven) - Tool spindle speed: 200 - 6,000 rpm - Total number of tools (standard specification): 31 - Tool size: 16 mm square x 100 mm - Rapid traverse: 32 m/min; rapid traverse in X1 and Y1: 24 m/min, in Y2: 24 m/min Hfjdpfex Hxz Hox Ag Der - Controllable axes: 6 The machine is equipped with a bar loader from FMB, type: TURBO 3-36, and a chip conveyor. Note: The item must be collected, by firm appointment, between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck

Condition: used, Year of construction: 2004, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Hardinge Lathe Model TT-66 Year 2004 CNC GE Fanuc Series 18i-T Twin Spindle Twin Turret Hfedsx Hw Urspfx Ag Dsr Chip Conveyor Iemca Bar Feeder Driven Tools

Condition: good (used), Year of construction: 2007, Turning Length 3.500 mm Turning diameter 720 mm Some technical details are shown on photos. Hfjdpox Hvvusfx Ag Dsr

Condition: excellent (used), Year of construction: 2004, CNC Control: MSG-501 X axis mm: 900 Y axis mm: 800 Z axis mm: 980 B axis mm: 0.001 Pallet size mm: 630 x 630 Number of pallets: 2 Table load capacity kg: 1,200 Cutting feed mm/min X,Y,Z: 50,000 Max. rapid traverse m/min X, Y, Z: 50, 50, 50 Spindle speed rpm: 10,000 Spindle power kW: 30/25 Taper type: BT-50 Torque Nm: - Tool changer type: Chain Tool changer positions: 60 Max. tool diameter mm: 110 Max. tool diameter with adjacent positions empty: 320 Max. tool length mm: 600 Max. tool weight kg: 30 Coolant tank capacity l: 930 Through spindle cooling bar: Yes EQUIPMENT Chip conveyor Internal cooling Hodpoxw Rg Hefx Ag Defr Rigid tapping Manuals, electrical diagram, etc. MACHINE DIMENSIONS Length mm: 3,670 Width mm: 5,300 Height mm: 3,270 Weight kg: 19,000

Condition: excellent (used), Year of construction: 1986, Engine lathe, manufacturer VDF HEIDENREICH & HARBECK, type 540 Hamburg, year 1986. In very good original condition, equipped with a 3-axis digital readout Heidenhain POSITIP 880. Feed and rapid traverse on all 3 axes, including the top slide. Comes with coolant system, rear chip guard, and machine documentation. Chuck: 315 mm Forkardt Turning diameter: 540 mm Turning length: 1500 mm Spindle bore: 103 mm Spindle speeds: 9–1800 rpm Tool holder: Multifix C Chip protection cover For further details, see technical data sheet. Hfsdpfjx Hr Duex Ag Dor Space requirement: length 3.8 m, width 2 m (with rear wall), height 2 m (with rear wall), weight approx. 3500 kg.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,441 h, functionality: fully functional, machine/vehicle number: 6000816, turning length: 50 mm, spindle speed (max.): 12,000 rpm, bar passage: 12 mm, controller model: Mitsubishi TX-8i, counter spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Main spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Counter spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool Carrier II (X/Z) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control system: Mitsubishi TX-8i Dimensions & Weight Spindle center height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with control cabinet (max. configuration): 2,000 kg Weight without control cabinet (max. configuration): 1,600 kg Weight with control cabinet (min. configuration): 1,200 kg Weight without control cabinet (min. configuration): 850 kg Operating Hours Power-on hours (control): 19,441 h Automatic mode 1: 7,607 h Automatic mode 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Chip conveyor Coolant pump Bar feeder FMB minimag 3200 Workpiece discharge device (tube) Hjdpfxjx Hxv Ds Ag Defr Mechanical interface prepared Various fixed holders Rinse gun

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 22012A, spindle speed (min.): 200 rpm, spindle speed (max.): 10,000 rpm, total height: 2,200 mm, total length: 9,000 mm, total width: 1,500 mm, overall weight: 5,000 kg, controller manufacturer: FANUC, controller model: SERIES 32-i MODEL B, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI B0266E-II CNC Automatic Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 64 A - Max. bar stock clamping diameter: 26 mm - Max. machining length: 320 mm (synchronously driven guide bushing) - Without guide bushing: 50 mm - Max. drilling diameter: 12 mm - Max. tapping diameter: M10 - Diameter of deep-hole drilling: 10 mm Hodpfx Agsx Hxy Ao Dofr - Max. sub-spindle clamping diameter: 26 mm - Max. sub-spindle drilling diameter: 10 mm - Max. sub-spindle tapping diameter: M10 - Max. tool spindle drilling diameter: 8 mm (front/rear tool holder) - Max. tool spindle tapping diameter: M6 (front/rear tool holder) - Max. cutter diameter (tool spindle): 45 mm - Rotating guide bushing: 200 – 10,000 rpm (synchronously driven) - Tool spindle speed: 200 – 6,000 rpm - Total number of tools (standard specification): 31 - Tool size: 16 mm square x 100 mm - Rapid traverse: 32 m/min; rapid traverse in X1 and Y1: 24 m/min; in Y2: 24 m/min - Controllable axes: 6 The machine is equipped with a bar feeder from FMB, type: TURBO 3-36, as well as a chip conveyor. Note: The item must be collected between 04 and 12 March 2026 on a binding date to be agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: used, Year of construction: 2003, machine/vehicle number: 1527, Used lead and feed screw lathe COLCHESTER Triumph VS 2500 Centre height: 195mm Distance between centers: 650mm Spindle bore: 54mm Infinitely variable speed: 14–2500 rpm Tailstock quill: MT5, coolant system, quick thread cutting device Digital readout: FAGOR NUP 300 TS-RS Hfedpfx Aex Hrumjg Dsr 1 x RÖHM 3-jaw chuck, 5-position stop drum, spindle stop, machine lamp, 1 x PARAT 4-way turret, 4 x PARAT tool holders, live centre and quick-action drill chuck. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Inspection of the machine is possible by appointment.

Condition: excellent (used), CNC lathe DMG CLX 450 V3, year 2018, Siemens, in very good condition. Hedsx Hqh Sspfx Ag Dofr

Condition: excellent (used), Year of construction: 2007, TECHNICAL DETAILS: - CNC Control: MSX 803III - X Axis travel: 260 mm - Z Axis travel: 590 mm - Y Axis travel: +/- 50 mm - Maximum Turning Diameter: 356 mm - C Axis Indexing Increment: 0.001° - Maximum Turning Length: - Cutting Feed Rate X, Z, Y: - Swing Over Bed: - Swing Over Carriage: - Bar Capacity: Ø 65 mm (main spindle) - Max. Rapid Traverse X, Z: - Main Spindle 12” - Spindle Speed: 5,000 rpm - Spindle Power: 18.5 kW - Torque: - Main Spindle Bore: mm - Main Spindle Nose: A2-6 - Sub-Spindle - Spindle Speed: 6,000 rpm - Spindle Power: 11 kW - Torque: - Sub-Spindle Bore: mm - Sub-Spindle Nose: A2-5 - Turret Positions: 12 - Number of Driven Tool Stations: 12 - Driven Tool Speed: 6,000 rpm - Driven Tool Power: 5.5 kW EQUIPMENT: - Chip conveyor - 3-color status light - Fixed tool holders - Parts catcher MACHINE DIMENSIONS: - Length: 2,705 mm Hjdpfx Agjwdrfge Dsfr - Width: 2,000 mm - Height: 2,120 mm - Weight: 5,800 kg

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840 Dsl Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2013 Control system:Siemens 840 Dsl Turning length:1,185 Swing diameter:540 mm Bar capacity:75 Main spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush Sub spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush + flush through spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on traveling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:Capto C6 X-axis:450 mm Y-axis:200 mm Z-axis:1,200 mm B-axis:+/- 110° Position sensors:Direct scales (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Hfodpfx Agexl Nfqo Dsr Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Automation: Technology:Portal loader with stacking magazine Workpiece diameter:50 - 200 mm Max. workpiece height:230 mm Max. workpiece weight:15 kg Number of stacking attachments:20 Max. load capacity per stacking attachment:40 kg Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 80 bar Tool magazine:Chain magazine, 120 stations Workpiece measurement:Renishaw touch probe Tool breakage monitoring:Swivel wire Automation:Portal loader with stacking magazine Emulsion mist separator:Mechanical Setup operation:Electronic handwheel Workspace door:Automatic Chuck:2x SMW KNCS 260 Tool holders:Various Capto C6 holders

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 22006A, spindle speed (max.): 10,000 rpm, spindle speed (min.): 200 rpm, overall weight: 5,000 kg, total width: 1,500 mm, total length: 9,000 mm, total height: 2,200 mm, controller manufacturer: FANUC, controller model: SERIES 32 i-MODEL B, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI B0266E-II CNC Automatic Lathe - Operating voltage: 400 V - Rated current: 64 A - Frequency: 50 Hz - Max. bar capacity: 26 mm - Max. machining length: 320 mm (synchronously driven guide bushing) - Without guide bushing: 50 mm - Max. drilling diameter: 12 mm - Max. tapping diameter: M10 - Diameter for deep holes: 10 mm Hfsdpfsx Hwn Sox Ag Dor - Max. sub-spindle clamping diameter: 26 mm - Max. sub-spindle drilling diameter: 10 mm - Max. sub-spindle tapping diameter: M10 - Max. tool spindle drilling diameter: 8 mm (front/rear tool holder) - Max. tool spindle tapping diameter: M6 (front/rear tool holder) - Max. slot milling cutter diameter tool spindle: 45 mm - Rotating guide bushing: 200 - 10,000 rpm (synchronously driven) - Tool spindle speed: 200 - 6,000 rpm - Total number of tools (standard specification): 31 - Tool size: 16 mm square x 100 mm - Rapid traverse: 32 m/min, rapid traverse in X1 and Y1: 24 m/min, in Y2: 24 m/min - Controllable axes: 6 The machine is equipped with a bar feeder from FMB, model: TURBO 3-36, as well as a chip conveyor. Note: The item must be collected between March 4th and March 12th, 2026, on a date to be agreed upon. FCA D-75181 Pforzheim – loaded onto truck

Condition: excellent (used), Year of construction: 2007, TECHNICAL DETAILS CNC Control: FANUC 18i-TB X1/X2 Axis mm: 555/185 Z1/Z2 Axis mm: 1,095/1,140 Y Axis mm: 160 (+/- 80) B Axis mm: 240 (+/- 120) Maximum Turning Diameter mm: 550 Hsdpfxoxxdmie Ag Defr C Axis Increment: 0.001° Maximum Turning Length mm: 1,020 Cutting Feed Rate mm/min X,Z,Y: 500 Rapid Traverse Speed mm/min: X1, Z1: 24,000 Y: 16,000 B: 27,000 C: 200 (Z2: 24,000) (X2: 24,000) Swing Over Bed mm: Ø 750 Swing Over Cross Slide mm: Ø 600 Bar Capacity mm: Ø 65 (main) / Ø - (sub) Max. Rapid Traverse m/min X,Z,B-Y: - Spindle / Sub-Spindle: - Spindle Speed rpm: 5,000 Spindle Power kW: 22/15 Torque Nm: - Main Spindle Bore: - Main Spindle Nose: A2-6 Milling Head: - Spindle Speed rpm: 10,000 Spindle Power kW: 15/11 Torque Nm: - Taper Type: CAPTO C6 Number of Tools in Magazine: 40 Turret: - Turret Positions: - Number of Driven Tool Stations: - Driven Tool Speed rpm: - Driven Tool Power: - EQUIPMENT Chip Conveyor, Hinged Belt Type: Included Bar Feeder Interface Adjustment Control: Included MACHINE DIMENSIONS Length mm: 6,070 Width mm: 2,682 Height mm: 3,011 Weight kg: 15,500

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 505, spindle speed (max.): 10,000 rpm, spindle speed (min.): 200 rpm, total height: 2,400 mm, total length: 8,000 mm, total width: 1,500 mm, overall weight: 6,000 kg, controller manufacturer: FANUC, controller model: SERIES 31 i-MODEL A, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI HS 207 CNC Automatic Lathe - Operating voltage: 380 V - Frequency: 50 Hz - Rated current: 41 A - Rated power: 14.3 kVA - Bar clamping diameter: from 3 to 20 mm - Max. machining length: 210 mm (synchronously driven guide bushing) - Static guide bushing: 250 mm - Rotating guide bushing: 80 mm - Without guide bushing: 45 mm - Max. drilling diameter: 10 mm - Max. tapping diameter: M10 - Diameter of deep holes: 8 mm - Max. counter spindle clamping diameter: 20 mm - Max. counter spindle drilling diameter: 8 mm - Max. counter spindle tapping diameter: M6 - Max. tool spindle drilling diameter: 6 mm (front/rear tool holder, B-axis tool spindle) - Max. tool spindle tapping diameter: M5 (front/rear tool holder, B-axis tool spindle) - Max. tool spindle slot milling cutter diameter: 30 mm - Tool spindle speed: 200–8000 rpm - Total number of tools (standard specification): 35 Hedpfox Hwlwex Ag Dofr - Tool dimensions: 12 x 12 x 100 mm - Rapid traverse: 32 m/min - Rapid traverse in X1 and Y1: 24 m/min, in Y2: 15 m/min - Controllable axes: 7 The machine is equipped with a bar feeder from manufacturer FMB, type: TURBO 3-36, as well as a chip conveyor and coolant system. Note: This item must be picked up definitively between 04 and 12 March 2026 on a date to be mutually agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: excellent (used), Year of construction: 2009, CNC Control: MSX 850II X axis mm: 260 Z axis mm: 590 Y axis mm: 100 (+/- 50) Maximum Turning Diameter mm: 356 C Axis Increment: 0.001° Maximum Turning Length: 510 Cutting Feed mm/min X,Z,Y: - Swing over Bed mm: Ø 923.8 Swing over Carriage mm: Ø 755 Bar Capacity mm: Ø 65 (main) Max. Rapid Traverse mm/min X,Z,Y: 30,000 / 10,000 Main Spindle (Chuck): 10” Spindle Speed rpm: 6,000 Spindle Power kW: 11 / 7.5 Torque Nm: - Main Spindle Bore mm: - Main Spindle Nose: A2-8 Turret Positions: 16 Number of Live Tool Stations: 16 Live Tool Speed rpm: 6,000 Live Tool Power kW: 5.5 EQUIPMENT Automatic Tailstock 3-color Status Lamp Fixed Tool Holders Parts Extractor Hodpjx Eh Nuofx Ag Dsfr

Condition: not inspected (used), Year of construction: 1977, functionality: unexamined, machine/vehicle number: 192.6155-06, spindle bore: 62 mm, turning diameter over bed slide: 270 mm, center width: 1,150 mm, turning length: 1,000 mm, spindle speed (max.): 2,240 rpm, No minimum price – guaranteed sale to the highest bidder! This machine is being auctioned due to a business closure. Placing a bid obligates the buyer to collect the item within the specified pickup window: January 26, 2026 to January 29, 2026. TECHNICAL DETAILS Swing diameter over bed (max.): 485 mm Turning length (max.): 1,000 mm Swing diameter over cross slide (max.): 270 mm Distance between centers (max.): 1,150 mm Spindle bore diameter: 62 mm Internal taper, metric (max.): 70 mm Maximum tool shank size (W x H): 25 x 25 mm Leadscrew: 6 mm Tailstock quill taper: Morse 5 Manual quill travel (max.): 119 mm Cross-slide travel from center position (max.): 110 mm Spindle speed range: 11.2 – 2,240 rpm MACHINE DETAILS Hfjdpjxqg Akjfx Ag Der Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,000 x 1,600 mm Weight: 1,500 kg EQUIPMENT Tailstock Multifix quick-change tool holder 3-jaw chuck, diameter: 250 mm, Manufacturer: FORKARDT Multifix tool holder, type: BD 25140 Multifix tool holder, type: BD 25120 Turning tools Steady rest (diameter approx. 150 mm) 4-jaw face plate, diameter: 450 mm

Condition: good (used), functionality: fully functional, machine/vehicle number: 14736259, spindle speed (max.): 6,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 200 mm, total height: 2,100 mm, total length: 1,800 mm, total width: 1,500 mm, overall weight: 2,000 kg, HYUNDAI HIT-8 S CNC lathe - Operating voltage: 380 V - Frequency: 50/60 Hz - Rated current: 24 A - Connection: 25.5 kVA Hodpfx Ajx Hwhfeg Dofr Note: The item must be collected between 04 and 12 March 2026 on a specific date to be agreed upon in advance. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 310163917, travel distance X-axis: 150 mm, travel distance Z-axis: 250 mm, total height: 2,200 mm, total length: 3,000 mm, total width: 2,000 mm, overall weight: 4,000 kg, controller manufacturer: MAZAK, controller model: MAZATROL 640 T, MAZAK SUPERQUICKTURN 100 M CNC Lathe Hodpfx Aex Hwguog Djfr - Operating voltage: 200 V - Frequency: 50/60 Hz - Rated current: 89 A - Connection: 17.8 kVA The machine is equipped with a tailstock and a 12-position tool turret, including driven tool stations. Note: The item must be collected definitively between 04 and 12 March 2026 on a date yet to be agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: M034362CAFG, turning length: 209 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, total height: 2,200 mm, total length: 3,500 mm, total width: 2,000 mm, feed length X-axis: 170 mm, feed length Z-axis: 335 mm, quill diameter: 60 mm, overall weight: 4,000 kg, bar passage: 51 mm, controller manufacturer: FANUC, controller model: SERIES 0i-TD, number of slots in tool magazine: 12, HWACHEON VUTEX - 160 B MC CNC Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 75 A - Swing diameter over bed: 550 mm - Speed of driven tools: 5000 rpm The machine is equipped with a 12-position tool changer, including driven tool stations and a chip conveyor. Note: Does not include the tool holders visible in the photos! Attention: The item must be collected definitively between 04 and 12 March 2026 on a date to be coordinated. FCA D-75181 Pforzheim – loaded on truck Hfedpex Hwf Rsfx Ag Der

Condition: good (used), Year of construction: 2010, operating hours: 64,321 h, functionality: fully functional, machine/vehicle number: 2SAY0351, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe Hfodpfex Hwfqsx Ag Djr - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm - Spindle distance: 485 mm The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Note: The tool holders shown in the photos are not included! Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck.

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: S2A130951, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe Hfedpfjx Hwansx Ag Dsr - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm - Spindle distance: 485 mm The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Note: The tool holders shown in the photos are not included! Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck.