Used Nexus for sale (76)

Condition: used, Year of construction: 2008, Mazak QTN-100MSY Year: 2008 X/Y/Z/B: 185/100/455/460 mm Max. turning diameter: 280 mm Bar capacity up to 51 mm diameter Main spindle Speed range: 6000 rpm Main drive power: 11 kW Max. torque: 184 Nm Spindle bore diameter: 61 mm C-axis spindle positioning: 0.001° Second spindle Speed range: 6000 rpm Drive power: 11 kW Max. torque: 89 Nm Indexing: 0.001° Tool turret Pjdpfxjxn Svds Ah Hjgg Number of tool stations: 12 Driven tools Speed range: 4500 rpm Drive power: 5.5 kW Max. torque: 35 Nm Travel paths X-axis: 185 mm Y-axis: 100 (+/- 50) mm Z-axis: 455 mm W-axis: 460 mm Toolsetter Parts catcher Chip conveyor, right side Coolant pump Barfeeder interface

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total height: 4,350 mm, total length: 8,000 mm, total width: 6,400 mm, volume flow: 35,000 m³/h, type of input current: three-phase, overall weight: 3,800 kg, working width: 3,500 mm, warranty duration: 12 months, workpiece weight (max.): 4,200 kg, inner dimension height: 3,500 mm, inner dimension length: 7,900 mm, load capacity: 4,200 kg, inner dimension width: 4,900 mm, heating capacity: 290 kW (394.29 HP), filter area: 32 m², power: 22 kW (29.91 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Nexus 350 – Professional Spray Booth for Vans & Buses Large Format. High Airflow. Built for Commercial Vehicles. ⚡ Professional full downdraft spray booth for vans & buses ⚡ Designed for body shops specializing in commercial vehicles ⚡ Large working volume, stable airflow and optimized operating costs ⚡ Designed and delivered in full compliance with EU regulations 🔑 Key Advantages for Vans & Buses ✔ Large internal dimensions optimized for vans & buses ✔ Full downdraft airflow – consistent paint quality on large panels and roofs ✔ High-capacity DDF fans with VFD control ✔ Increased airflow for high cabins and long vehicle bodies ✔ Insulated sandwich panel construction – thermal stability and noise reduction ✔ Designed for intensive, multi-shift professional use 🌬️ Airflow Concept – Full Downdraft for Vans & Buses The Ventis Nexus 350 operates in a full downdraft configuration, specifically optimized for vans & buses. uniform airflow on roofs, sides and rear sections reduced dust contamination on large surfaces consistent, repeatable paint finish on vans & buses 🔧 Fans & Airflow Control – DDF + VFD Airflow is generated by high-efficiency direct-drive (DDF) fans, digitally controlled via variable frequency drives (VFDs). Total installed fan power: 22 kW Pedpfx Asx Tiwrsh Hogg Airflow capacity: approx. 35,000 m³/h Benefits: stable airflow even with tall vehicles precise airflow regulation in painting and drying modes lower energy consumption compared to fixed-speed systems no belts or pulleys = reduced maintenance and downtime 🧱 Construction & Insulation Insulated EPS-core sandwich panels for energy-efficient operation Roof made of corrosion-resistant galvanized steel Durable construction suitable for demanding commercial vehicle workshops 🔥 Heating System Integrated high-capacity heating system featuring a Riello RG5S burner (290 kW), providing: uniform warm air distribution throughout the entire booth stable curing conditions for large vehicle surfaces fast temperature build-up and reduced drying times, even with high air volumes 🎨 Operating Modes ✔ Painting mode – full downdraft airflow for clean application on vans & buses ✔ Drying mode – regulated airflow and temperature for efficient curing 🧼 Filtration System Ceiling-mounted intake filtration with diffusion media High-efficiency exhaust filters capturing overspray and airborne particles Clean exhaust air before discharge 🚪 Doors, Lighting & Access Four-leaf glazed steel front doors – wide access for vans & buses Side technical service doors for maintenance and inspection Integrated LED lighting for bright, uniform illumination of large vehicles 📐 Dimensions & Technical Data Internal dimensions: approx. 8,000 × 5,000 × 3,500 mm Airflow capacity: approx. 35,000 m³/h Total fan power: 22 kW Heating capacity: Riello RG5S – 290 kW ➕ Optional Equipment 15" HMI touchscreen control panel Alternative insulation: PIR or mineral wool Integration with prep stations or paint mixing rooms Preparation for in-floor scissor lift 🚚 Delivery & Installation ✔ Professional installation and commissioning across the EU ✔ Permit and documentation support included 🛡️ Warranty & Support ✔ Manufacturer warranty: 12 months ✔ EU-based technical support and service

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, feed length X-axis: 350 mm, travel distance X-axis: 6,500 mm, rapid traverse Z-axis: 350 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 1,000 rpm, overall weight: 4,500 kg, working range: 6,500 mm, spindle motor power: 7 W, Headline Options: - Boost Your Production with the Refurbished NEXUS REV 8000 4-Axis CNC Machining Center! - Precision & Power: The Ultimate 4-Axis CNC Solution for Aluminum Doors & Windows - Maximize Efficiency: High-Speed, Double-Station CNC Machining Center Key Selling Points (Short & Punchy): - 4-Axis CNC Power: Machine complex profiles from the top and all angles (±90°) with incredible precision. - High-Speed Spindle: 7.5 kW spindle reaching 24,000 rpm for fast, clean cuts even on thick profiles. - Double-Station Design: Two independent 6.5-meter workstations for non-stop productivity—machine one profile while setting up the next. Pjdpfx Aoxfqg Noh Hegg - Exceptional Accuracy: Advanced gantry system with dual servo motors ensures perfect alignment and vibration-free operation. - Smart Tool Management: 8-position automatic tool magazine handles tools from 1 mm up to 300 mm disc cutters. - Plug-and-Play Software: Included UNILINK CAD-CAM software streamlines operation from design (DXF) to finished part with automatic tool and clamp management. - Fully Refurbished & Guaranteed: Completely overhauled by NEXUS TECHNICA experts, backed by a 6-month warranty and full future support. Technical Highlights for the Ad: - Work Envelope (X, Y, Z): 6,500 mm x 350 mm x 350 mm (Double Station) - Spindle: 7.5 kW, 24,000 rpm - Control: Advanced CNC with movable terminal (PC, keyboard, mouse included) - Tool Magazine: 8 positions (handles large disc cutters) - Clamping: 10 manually positioned pneumatic clamps (automatic positioning optional) - Software: UNILINK 3D CAD-CAM software - Condition: Professionally refurbished and modernized Ideal For: - Manufacturers of aluminum windows, doors, and sliding systems - Companies working with long aluminum profiles - Businesses aiming to automate and boost production capacity Call to Action: Ready to revolutionize your profile machining? Contact us today for more information and to arrange a viewing!

Condition: good (used), Year of construction: 2006, Technical Specifications – QTN-250M (Turning Length 1000 mm) Chuck Size: 10 inches Maximum Swing: 677.5 mm Standard Turning Diameter: 430 mm Maximum Machining Diameter: 633 mm Maximum Machining Capacity: 677 mm Maximum Turning Length (Z-Axis): 1000 mm Pgedpfxjwfynfe Ah Hjg Bar Capacity: 77 mm Spindle Nose: A2-8 Main Spindle Speed: 30–4000 rpm Main Spindle Motor Power (30-minute Output): 25 kW (36 HP) Maximum Main Spindle Torque: 355 Nm (36.0 kgf m) Tailstock: • Quill Type: Morse Taper No. 5 • Maximum Tailstock Travel: 1050 mm • Maximum Thrust: 12 kN (1200 kgf) Tool turret: • 12 tool positions • Tool sizes: • External turning tool: Ø40 mm • Internal turning tool: Ø20 mm • Milling drill: Ø20 mm • Milling tap: M12 Milling spindle: • Speed: 25–4500 rpm (optional 6000 rpm) • Motor power: 5.5 kW (7.5 HP) • Maximum torque: 35 Nm (3.6 kgf m) Coolant volume: 160 liters Machine dimensions: • Width: 1780 mm • Total height: 2533 mm • Space required: approx. 4.51 m² • Machine weight: approx. 5200 kg 1x chip conveyor 1x tray Pictures coming soon

Condition: used, Year of construction: 2008, Ma.-No. 204412, Control Mazatrol Matrix Nexus, travel X/Y/Z 260 x 150 x 1,605 mm, max. spindle speed 3,300 rpm, max. spindle bore 102 mm, max. turning diameter 420 mm, max. turning length 1,500 mm, 12-position tool turret with driven tool stations, tool holder VDI 50, max. speed 4,000 rpm, operating hours approx. 81,940, three-jaw chuck, hydraulic steady rest, make SMW Autoblok, tailstock, tool measuring system, chip conveyor, make Mayfran, type QTN300M, tool and accessory package. PCB defective! Pjdpfx Ahjyffxhs Hsgg +++ Note: Machine is part of an online auction! +++

Condition: used, Year of construction: 2006, machine/vehicle number: 184628, Weight: 7,100 kg, 30-position tool changer, movable T-slot clamping table, MAZATROL 640M control, travel (x/y/z): 1 mm, lubricant processing system, chip conveyor, control cabinet, without machine vises, ATTENTION: Collection for this item only by prior arrangement!!! Pedpfxoycir To Ah Hjgg

Condition: ready for operation (used), Year of construction: 2007, 3-Axis Vertical Machining Center Podeyfgw Espfx Ah Hegg MAZAK - NEXUS VCN 510 C-II CNC: MAZATROL MATRIX NEXUS Year: 2007 (8,300 spindle hours) Specifications: X-axis travel: 1,050 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Rapid traverse: 36 m/min Table size: 1,300 x 550 mm Maximum table load: 1,200 kg Spindle speed: 12,000 rpm Spindle power: 18.5 kW Spindle taper: BT 40 Max. tool diameter: 80 mm Max. tool length: 350 mm Max. tool weight: 8 kg Approx. machine dimensions: 2,820 x 2,830 x H 2,840 mm Approx. weight: 6,700 kg Equipped with: - 30-tool magazine - Through-spindle coolant - Chip conveyor - Tool probe

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, MAZAK QUICK TURN NEXUS 350-II MY x 1500 Max. swing diameter: 750 mm Max. machining diameter: 420 mm Max. machining length: 1,539 mm Max. milling speed: 4,500 rpm Pedpsya Du Rsfx Ah Hogg Max. spindle speed: 3,300 rpm Max. bar diameter: 102 mm Machine equipped with: - CNC CONTROL Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-212, diameter 304 mm - Tool Eye - C-axis - Y-axis - NC tailstock - Hydraulic SMW steady rest - Main spindle with 102 mm bar capacity - Reinforced coolant pump - Chip conveyor, side discharge - 8 fixed tool holders - 2 driven tool holders

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table load: 500 kg, spindle speed (max.): 18,000 rpm, number of axes: 3, This Mazak NEXUS 5000 II was manufactured in 2007. It features a table size of 500 x 500 mm, capable of handling weights up to 500 kg. Equipped with a high-speed spindle at 18,000 rpm and a spindle motor power of 18.5 kW, it ensures efficient machining. Includes a 40-position tool changer and Mazatrol Matrix control for enhanced precision. Contact us for more information about this machine. Additional equipment Pgedpfx Ahoyallds Hsg • Chip conveyor • CNC handwheel • CTS 20 bar • 40-position tool changer • tool integrity sensor Machine Benefits Technical Machine Benefits • 500 kg • Table dimensions: 2 x 500 x 500 mm • Indexed table • Cee certified • Includes manuals Extra Information Machine still under power

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total height: 3,450 mm, total length: 7,000 mm, total width: 5,400 mm, volume flow: 25,000 m³/h, type of input current: three-phase, overall weight: 3,200 kg, working width: 2,750 mm, warranty duration: 12 months, workpiece weight (max.): 3,500 kg, inner dimension height: 2,750 mm, inner dimension length: 6,900 mm, load capacity: 3,500 kg, inner dimension width: 3,900 mm, heating capacity: 213 kW (289.60 HP), filter area: 25 m², power: 15 kW (20.39 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Nexus 250 – Professional Automotive Spray Booth Reliable. Efficient. Built for Daily Workshop Use. ⚡ Professional full downdraft spray booth for body shops and refinishing centers ⚡ Engineered for stable airflow, clean working conditions, and optimized operating costs ⚡ Designed and delivered in compliance with EU regulations 🔑 Key Advantages ✔ Full downdraft airflow – consistent paint quality and excellent overspray control ✔ Direct-drive (DDF) fans with VFD control – lower energy consumption and maintenance ✔ Stable airflow in all operating modes ✔ Insulated sandwich panel construction – thermal stability and noise reduction ✔ Designed for intensive daily professional use 🌬️ Airflow Concept – Full Downdraft The Nexus 250 operates in a full downdraft configuration. Clean, filtered air is supplied through a full-surface ceiling plenum and evenly directed downward through the working zone. Contaminated air is extracted via a high-efficiency exhaust system, ensuring: uniform airflow reduced dust contamination high-quality paint finish 🔧 Fans & Airflow Control Airflow is generated by high-efficiency direct-drive (DDF) fans, digitally controlled via variable frequency drives (VFDs). Benefits: precise airflow regulation reduced energy consumption lower noise levels no belts = reduced mechanical wear and downtime 🧱 Construction & Insulation Insulated EPS-core sandwich panels for energy-efficient operation Roof made of corrosion-resistant galvanized steel Durable construction suitable for demanding workshop environments 🔥 Heating System The Nexus 250 is equipped with an integrated heating system with a Riello 40 G20 burner, providing: uniform warm air distribution stable curing conditions reduced drying times 🎨 Operating Modes ✔ Painting mode – full downdraft airflow for clean application ✔ Drying mode – regulated airflow and temperature for efficient curing 🧼 Filtration System Ceiling-mounted intake filtration with diffusion media High-efficiency exhaust filters capturing overspray and airborne particles Clean exhaust air before discharge Pgsdpfx Ahex Tiz Dj Heg 🚪 Doors, Lighting & Access Four-leaf glazed aluminum front doors – wide access and excellent visibility Side technical service doors for maintenance Integrated LED lighting for bright, uniform illumination 📐 Dimensions & Technical Data Internal dimensions: approx. 7,000 × 4,000 × 2,750 mm Airflow capacity: approx. 25,000 m³/h ➕ Optional Equipment 15" HMI touchscreen control panel Alternative insulation: PIR or mineral wool Integration with prep stations or mixing rooms Preparation for in-floor scissor lift 🚚 Delivery & Installation ✔ Manufactured to order or available upon request (8-10 weeks) ✔ Professional installation and commissioning across the EU ✔ Permit and documentation support included 🛡️ Warranty & Support ✔ Manufacturer warranty 12 months ✔ EU-based technical support and service 📩 Contact us for availability, delivery time, configuration options, and a tailored offer. We will be happy to advise you and prepare a solution adapted to your workshop.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total height: 3,450 mm, total length: 7,000 mm, total width: 5,400 mm, volume flow: 25,000 m³/h, type of input current: three-phase, overall weight: 3,200 kg, working width: 2,750 mm, warranty duration: 12 months, workpiece weight (max.): 3,500 kg, inner dimension height: 2,750 mm, inner dimension length: 6,900 mm, load capacity: 3,500 kg, inner dimension width: 3,900 mm, heating capacity: 213 kW (289.60 HP), filter area: 25 m², power: 15 kW (20.39 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Nexus 250 – Professional Automotive Spray Booth Reliable. Efficient. Built for Daily Workshop Use. ⚡ Professional full downdraft spray booth for body shops and refinishing centers ⚡ Engineered for stable airflow, clean working conditions, and optimized operating costs ⚡ Designed and delivered in compliance with EU regulations 🔑 Key Advantages ✔ Full downdraft airflow – consistent paint quality and excellent overspray control ✔ Direct-drive (DDF) fans with VFD control – lower energy consumption and maintenance ✔ Stable airflow in all operating modes ✔ Insulated sandwich panel construction – thermal stability and noise reduction ✔ Designed for intensive daily professional use 🌬️ Airflow Concept – Full Downdraft Pgjdpfx Ahsx Tg Nfo Heg The Nexus 250 operates in a full downdraft configuration. Clean, filtered air is supplied through a full-surface ceiling plenum and evenly directed downward through the working zone. Contaminated air is extracted via a high-efficiency exhaust system, ensuring: uniform airflow reduced dust contamination high-quality paint finish 🔧 Fans & Airflow Control Airflow is generated by high-efficiency direct-drive (DDF) fans, digitally controlled via variable frequency drives (VFDs). Benefits: precise airflow regulation reduced energy consumption lower noise levels no belts = reduced mechanical wear and downtime 🧱 Construction & Insulation Insulated EPS-core sandwich panels for energy-efficient operation Roof made of corrosion-resistant galvanized steel Durable construction suitable for demanding workshop environments 🔥 Heating System The Nexus 250 is equipped with an integrated heating system with a Riello 40 G20 burner, providing: uniform warm air distribution stable curing conditions reduced drying times 🎨 Operating Modes ✔ Painting mode – full downdraft airflow for clean application ✔ Drying mode – regulated airflow and temperature for efficient curing 🧼 Filtration System Ceiling-mounted intake filtration with diffusion media High-efficiency exhaust filters capturing overspray and airborne particles Clean exhaust air before discharge 🚪 Doors, Lighting & Access Four-leaf glazed aluminum front doors – wide access and excellent visibility Side technical service doors for maintenance Integrated LED lighting for bright, uniform illumination 📐 Dimensions & Technical Data Internal dimensions: approx. 7,000 × 4,000 × 2,750 mm Airflow capacity: approx. 25,000 m³/h ➕ Optional Equipment 15" HMI touchscreen control panel Alternative insulation: PIR or mineral wool Integration with prep stations or mixing rooms Preparation for in-floor scissor lift 🚚 Delivery & Installation ✔ Manufactured to order or available upon request (8-10 weeks) ✔ Professional installation and commissioning across the EU ✔ Permit and documentation support included 🛡️ Warranty & Support ✔ Manufacturer warranty 12 months ✔ EU-based technical support and service 📩 Contact us for availability, delivery time, configuration options, and a tailored offer. We will be happy to advise you and prepare a solution adapted to your workshop.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total height: 3,450 mm, total length: 7,000 mm, total width: 5,400 mm, volume flow: 30,000 m³/h, type of input current: three-phase, overall weight: 3,200 kg, working width: 2,750 mm, warranty duration: 12 months, workpiece weight (max.): 3,500 kg, inner dimension height: 2,750 mm, inner dimension length: 6,900 mm, load capacity: 3,500 kg, inner dimension width: 3,900 mm, heating capacity: 290 kW (394.29 HP), filter area: 25 m², power: 18 kW (24.47 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Nexus 300 – Professional Automotive Spray Booth Reliable. Efficient. Built for Daily Workshop Use. ⚡ Professional full downdraft spray booth for body shops and refinishing centers ⚡ Engineered for stable airflow, clean working conditions, and optimized operating costs ⚡ Designed and delivered in compliance with EU regulations 🔑 Key Advantages ✔ Full downdraft airflow – consistent paint quality and excellent overspray control ✔ Direct-drive (DDF) fans with VFD control – lower energy consumption and maintenance ✔ Stable airflow in all operating modes ✔ Insulated sandwich panel construction – thermal stability and noise reduction ✔ Designed for intensive daily professional use 🌬️ Airflow Concept – Full Downdraft The Nexus 300 operates in a full downdraft configuration. Clean, filtered air is supplied through a full-surface ceiling plenum and evenly directed downward through the working zone. Contaminated air is extracted via a high-efficiency exhaust system, ensuring: uniform airflow reduced dust contamination high-quality paint finish 🔧 Fans & Airflow Control Airflow is generated by high-efficiency direct-drive (DDF) fans, digitally controlled via variable frequency drives (VFDs). Benefits: precise airflow regulation reduced energy consumption lower noise levels no belts = reduced mechanical wear and downtime 🧱 Construction & Insulation Insulated EPS-core sandwich panels for energy-efficient operation Roof made of corrosion-resistant galvanized steel Durable construction suitable for demanding workshop environments 🔥 Heating System The Nexus 300 is equipped with an integrated heating system with a Riello RG5S burner, providing: uniform warm air distribution stable curing conditions reduced drying times 🎨 Operating Modes ✔ Painting mode – full downdraft airflow for clean application ✔ Drying mode – regulated airflow and temperature for efficient curing 🧼 Filtration System Ceiling-mounted intake filtration with diffusion media High-efficiency exhaust filters capturing overspray and airborne particles Clean exhaust air before discharge 🚪 Doors, Lighting & Access Four-leaf glazed aluminum front doors – wide access and excellent visibility Side technical service doors for maintenance Integrated LED lighting for bright, uniform illumination 📐 Dimensions & Technical Data Internal dimensions: approx. 7,000 × 4,000 × 2,750 mm Airflow capacity: approx. 30,000 m³/h ➕ Optional Equipment 15" HMI touchscreen control panel Alternative insulation: PIR or mineral wool Integration with prep stations or mixing rooms Preparation for in-floor scissor lift 🚚 Delivery & Installation ✔ Manufactured to order or available upon request (8-10 weeks) ✔ Professional installation and commissioning across the EU ✔ Permit and documentation support included 🛡️ Warranty & Support ✔ Manufacturer warranty 12 months ✔ EU-based technical support and service Psdpex Tc Dxefx Ah Hjgg 📩 Contact us for availability, delivery time, configuration options, and a tailored offer. We will be happy to advise you and prepare a solution adapted to your workshop.

Condition: used, Year of construction: 2005, Mazak QTN 200 lathe, year of manufacture 2005 Podpjxgpqpjfx Ah Hegg Mazatrol 640T 210 mm Kitagawa BB 208 chuck Spindle bore 65 mm Turning length 500 mm Turning diameter 380 mm Tailstock Tool probe

Condition: reconditioned (used), Year of construction: 2006, MAZAK QUICK TURN NEXUS 200-II MY Podpexlzp Isfx Ah Hsgg Max. machining diameter: 380 mm Max. machining length: 538 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control Mazatrol Matrix - KITAGAWA three-jaw chuck BB-208, diameter 210 mm - Tool Eye - C-axis - Y-axis - Interface for bar feeder - Automatic parts catcher - NC tailstock - Reinforced coolant pump - MAYFRAN chip conveyor - 8 fixed tool holders - 2 driven tool holders

Condition: good (used), Year of construction: 2015, functionality: fully functional, turning diameter: 380 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 230 mm, travel distance Y-axis: 575 mm, power: 65 kW (88.38 HP), For sale is a CNC lathe of the brand Mazak and the type Quickturn Nexus 200-II MS. The machine is in good condition and ready for immediate use after installation. Technical data: Year of construction: 2015 Spindle hours main spindle: 10,379 h Spindle hours counter spindle: 6741 h Control system: MAZATROL Matrix Nexus 2 Chuck diameter main spindle: 8 Chuck size counter spindle: 6 Swing diameter: 675 mm Max. Machining diameter: 380 mm Pgjdpfx Ahet R S Daj Hjg Max. bar diameter of main spindle: 65 mm Max. speed main spindle: 5,000 1/min Motor power 30 min operation: 26 kW Max. Counter spindle speed: 6,000 1/min Power (40%ED): 11 kW Tool positions: 12 Driven tool positions: 12 Travel range X-axis: 230 mm Z-axis travel range: 575 mm Dimensions: 2,765*1,780 mm Weight: 4,900 kg Offer does not include accessories such as tools or tool holders Loading and shipping throughout Europe can be organized on request. Prices plus value added tax Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2013, turning diameter: 380 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, power: 26 kW (35.35 HP), For sale is a Mazak Quickturn Nexus 200-II MS CNC lathe. The machine is in good condition and ready for immediate use after installation. The machine is connected to the customer's site and can be inspected with power on. Technical Specifications: Year of Manufacture: 2013 Main Spindle Hours: 10,421 h Sub Spindle Hours: 4,262 h Control: MAZATROL Matrix Nexus Pgodpfxetqud As Ah Hjg Main Spindle Chuck Diameter: 8 Sub Spindle Chuck Size: 6 Swing Diameter: 675 mm Max. Machining Diameter: 380 mm Max. Bar Diameter of Main Spindle: 65 mm Max. Main Spindle Speed: 5,000 rpm Motor Power 30 min Operation: 26 kW Max. Sub Spindle Speed: 6,000 rpm Power (40% DC): 11 kW Tool Positions: 12 Driven Tool Positions: 12 X-Axis Travel: 230 mm Z-Axis Travel: 575 mm Dimensions: 2,765 x 1,780 mm Weight: 4,900 kg Offer does not include accessories such as tools or tool holders. Loading and shipping can be arranged throughout Europe upon request. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website.

Condition: excellent (used), Year of construction: 2014, Type: CNC Lathe (Horizontal) Manufacturer: Mazak Model: Quickturn Nexus 200-II MY Year of manufacture: 2014 Control: Mazatrol Matrix Nexus Origin: Japan Condition: In production use – age-appropriate wear Operating hours: 1-shift operation Specifications X-axis: 230 mm Y-axis: 100 (+/- 50) mm Z-axis: 575 mm Max. swing diameter: 675 mm Max. turning diameter: 380 mm Pjdpfjx Nxlqjx Ah Hsgg Bar work up to diameter: 65 mm Turret: 16 stations, all driven-tool capable Spindle speed: 4,500 rpm Accessories: Chip conveyor, collet chuck, many collets, approx. 8 driven tool holders, approx. 20 standard tool holders, Tool Eye, extraction unit, IRCO Profimat 52.6 magazine (year 2006), documentation

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 163341, Country of manufacture: UK Voltage: 400V 3-phase AC 50/60Hz, max 58A Dimensions: 200x260x250 cm Net machine weight: 5010 kg TECHNICAL SPECIFICATIONS Capacities Table dimensions: length 900 mm / depth 410 mm X-axis: 560 mm Y-axis: 410 mm Z-axis: 510 mm Distance from spindle nose to table surface: min. 150 mm, max. 660 mm Distance from spindle center to column: 540 mm Maximum table load: 500 kg Spindle Speed: 40 – 12,000 rpm Power (5 min): 18.5 kW Power (10 min): 15 kW Power (30 min): 10 kW Continuous power: 7.5 kW Feed Rapid traverse: 36,000 mm/min Cutting feed rate: 1 to 8,000 mm/min Table Dimensions: 900x410 mm T-slot size (ISO R299): 18 mm / Number: 3 / Spacing: 125 mm Permissible load: 500 kg Distance from floor to table surface: 780 mm ATC Tool Magazine Number of tools: 30 pcs Pedpfx Ahsw T Tp Ro Hjgg Tool selection: free choice of station number; automatic bi-directional search Tool holder: MAS BT-40 Max. tool diameter in magazine: Ø 80 mm (without adjacent tool: Ø 125 mm) Max. tool weight: 8 kg Max. magazine load: 120 kg Max. tool length: 350 mm Tool change time: 2.9 s (chip-to-chip) Lubricant tank: 1.8 L Feed lubricant tank: 260 cm³ Spindle coolant tank: 16 L Hydraulic pressure tank: 460 cm³ Coolant tank: 200 L Compressed air: 0.5 to 0.9 bar Capacity: 200 L/min Subject to errors or omissions, all technical specifications are provided without guarantee.

Year of construction: 2005, condition: ready for operation (used), General Data Pgedpfox D Rmtsx Ah Hog Measurements width 1780 mm Measurements depth 2765 mm Measurements height 1840 mm Machine weight 5100 kg Control Unit Brand MAZATROL Main Drive Spindle speed range 5000 Spindle motor power 26 kW Number of axis 3 Movement X-Axis Movement 230 mm Z-Axis Movement 575 mm Turret Number of turrets 1 Tools Number of station 12 This 3-axis Mazak Quick Turn NEXUS 200MS was manufactured in 2005. It features a maximum turning diameter of 380 mm, main spindle speed up to 5000 rpm, and a sub-spindle speed of 6000 rpm. The machine includes a Mazatrol 640T Nexus CNC control and has a robust design with dimensions of 2765x1780x1840 mm, weighing 5100 kg. If you are looking to get high-quality turning capabilities consider the Mazak Quick Turn NEXUS 200MS machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 9100 kg Control Unit Brand MAZATROL Model Mazatrol Matrix Main Drive Spindle speed range 3300 Spindle motor power 30 kW Number of axis 3 Workpiece Workpiece drm over bed 830 mm Psdpfx Ahjx D I Rie Hogg Turret Number of turrets 1 Tools Number of station 12 Media Chip conveyor Yes Additional Equipment Chip conveyor Tool presetter Autoblock chuck Toolholders User and maintenance manuals This 3-axis Mazak QT Nexus 350 II M was manufactured in 2008. It features a Mazatrol Matrix control unit, a maximum swing over bed of Ø 830 mm, and a turning length of 1500 mm. The spindle supports speeds up to 3300 rpm with a power of 30 kW. It includes a chip conveyor and tool presetter. If you are looking to get high-quality turning capabilities, consider the Mazak QT Nexus 350 II M machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,200 mm, Mazak Quick Turn Nexus 350M CNC turning center with Mazatrol 640T Nexus CNC control Year of manufacture: 2004.11 Turning length: 1,200 mm Pgjdox Dccyspfx Ah Heg Max. swing diameter: 750 mm Standard machining diameter: 336 mm Max. machining diameter: 420 mm Bar capacity: 102 mm Maximum spindle speed: 4,000 rpm 12-position tool turret Kitagawa 12-inch hydraulic 3-jaw chuck Tailstock Machine weight: 7,500 kg Includes various turret-mounted tool holders, 4 driven tool holders, and additional accessories. Accessories: 4 driven tools Mazak tool holders Chip conveyor

Condition: used, Year of construction: 2008, turning diameter: 380 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 77 mm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, total height: 1,680 mm, total length: 2,848 mm, total width: 1,860 mm, overall weight: 5,400 kg, CNC Lathe with Y-axis, driven tools, sub spindle and Gantry Loader CNC Control Mazatrol Matrix Nexus Turning diameter 276 / 380 mm Pgodpfxox Dcbps Ah Hjg Spindle bore diameter 77 mm Spindle speed 4000 R/min Spindle motor 26 Kw Movement X-axis 230 mm Movement Y-axis 100 mm Movement Z-axis 575 mm Movement W-axis 585 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper Mazak VDI Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 4.500 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2008, Mazak QTN 100IIM CNC Lathe Year of manufacture: 2008 C axis, driven tools Chuck: 170 mm Spindle bore: 51 mm Max turning diameter: 280 mm Max turning length: 334 mm Spindle: 35–6,000 RPM Travels: X - 185 mm Z - 385 mm Main spindle motor: 11 kW Max. torque: 184 Nm Spindle nose: A2–5'' Spindle indexing increments: 0.001° - Tailstock - Parts catcher - Measuring probe - Bar feeder interface - Chip tray with pump - Machine documentation - 10 standard tool holders Pedpfx Asxg Iffeh Hogg - 2 driven tool holders 1/1 Weight: 3,800 kg Dimensions (L x W x H): 2.10 x 1.70 x 2.00 m

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter: 380 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, counter spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Machining Area Maximum machining diameter: 380 mm Bar capacity: 77 mm Travel X-axis: 230 mm Travel Z-axis: 575 mm Spindle Data Main spindle speed: 4,000 rpm Main spindle motor power: 22 kW Sub spindle speed: 6,000 rpm Sub spindle motor power: 7.5 kW MACHINE DETAILS Control: Mazatrol 640T Nexus EQUIPMENT 12-position turret with driven tools Interface for bar feeder Short bar loader Multifeed MLI 3-jaw chuck Kitagawa B-210 3-jaw chuck Kitagawa B-206 Automatic parts catcher with conveyor belt Oil mist extraction system Bidding obligates timely collection by week 4 of 2026! TECHNICAL DETAILS Machining Area Maximum machining diameter: 380 mm Bar capacity: 77 mm Travel X-axis: 230 mm Travel Z-axis: 575 mm Spindle Data Main spindle speed: 4,000 rpm Podex Di Uiepfx Ah Hsgg Main spindle motor power: 22 kW Sub spindle speed: 6,000 rpm Sub spindle motor power: 7.5 kW MACHINE DETAILS Control: Mazatrol 640T Nexus EQUIPMENT 12-position turret with driven tools Interface for bar feeder Short bar loader Multifeed MLI 3-jaw chuck Kitagawa B-210 3-jaw chuck Kitagawa B-206 Automatic parts catcher with conveyor belt Oil mist extraction system High-pressure coolant: 5 bar Chip conveyor High-pressure coolant: 5 bar Chip conveyor

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Chip conveyor, Bar feeder interface, Tooling, EIA ISO, Rigid tapping Pgjdpfx Aoxykpash Hjg