Condition: not inspected (used), Year of construction: 2007, operating hours: 43,558 h, functionality: unexamined, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle speed (max.): 5,000 rpm, spindle bore: 118 mm, controller model: SIEMENS SINUMERIK 840 D POWERLINE, distance between spindles: 900 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates the buyer to collect the item within the specified time frames: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Maximum main spindle speed: 5,000 rpm Maximum sub spindle speed: 3,200 rpm Swing diameter: 270 mm Turning diameter: 120 mm Maximum bar diameter: 100/104 mm Spindle bore diameter: 118 mm Distance between spindles: 900 mm Travel X1-axis: 290 mm Travel Z1-axis: 650 mm Travel X2-axis: 180 mm Travel Z2-axis: 650 mm Travel Y1-axis: ±40 mm Travel Z3-axis: 670 mm Travel X3-axis: 175 mm Rapid traverse X/Z-axis: 30 m/min Rapid traverse Y-axis: 15 m/min Number of tool turrets: 2 Number of tools per turret: 12 All tool positions are driven MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 D POWERLINE Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,500 x 2,500 mm Machine weight: 11,000 kg Operating hours: 88,040 h Spindle hours: 43,558 h EQUIPMENT Chip conveyor Foot switch Note: Bjdpfx Asym A S Iob Ielf The machine has the following defects: - The B-axis is defective (located on turret 1) - The guideways and drives are worn in line with the machine’s age - The X2-axis (guide rails) runs slightly out of alignment in the range of 0.03 mm (re-measurement required) - Setting the reference values for the axes in the control system is not functioning - The hydraulic pump was replaced by a spare pump after failure and is now set up externally as a separate unit External reference: Bilstein - Lot 2

Condition: ready for operation (used), Year of construction: 1996, operating hours: 46,282 h, functionality: fully functional, controller model: TX 8F, counter spindle speed (max.): 4,000 rpm, workpiece diameter (max.): 56 mm, Equipment: bar feeder, chip conveyor, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Max. counter-spindle speed: 4,000 rpm Max. workpiece diameter: 56 mm Rapid traverse: max. 15 m/min Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Feed override: 0–200% Rapid traverse override: 0–100% Spindle speed override: 50–120% Workpiece removal via counter spindle Programming: EIA and ISO code Input/output resolution: X/Z: 0.001 mm, C-axis: 0.001° C-AXIS Main spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 100 Nm Accuracy: +/- 3 arcmin Counter spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 30 Nm Accuracy: +/- 3 arcmin Tool Turret 1 & 2 Driven tools per turret: 10 (14) Max. speed: 4,000 (8,000) rpm Power at 100% duty cycle: 1.5 kW Power at 15% duty cycle: 4 kW Torque at 15% duty cycle: 12.4 (4) Nm Number of tool holders per turret: 10 (14) Cylindrical shank as per DIN 69880: Ø 30 x 55 (25 x 48) mm Tool cross-section: 20 x 20 (16 x 16) mm Chip-to-chip time according to VDI 2852: 1.2 s Index time per station: 0.6 s Over 5 stations: 1.5 s Counter spindle (numerically controlled in Z-direction) Max. speed: 4,000 rpm Max. clamping diameter: 65 mm Continuously programmable AC motor: 11 kW Torque: 210 Nm Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw: Ø 32 x 10 mm MACHINE DETAILS Control: TX 8F Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator station: 71 dB(A) Hydraulics System pressure: 60 bar Tank capacity: 150 l Coolant Per tool turret: single-stage centrifugal pump Pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Read operating hours: 46,282 h EQUIPMENT STAMAG bar feeder Chip conveyor Hainbuch chucking system Two 10-station turrets with driven tool stations Counter spindle Bsdpjym A E Iofx Ab Ielf External reference: L. Schaible

Condition: not inspected (used), Year of construction: 2008, operating hours: 39,361 h, functionality: unexamined, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, controller model: SIEMENS SINUMERIK 840 D, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you are obliged to collect the item within the specified timeframe, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter: 640 mm Maximum turning diameter: 640 mm Bjdeym A D Rjpfx Ab Iolf Maximum turning diameter (sub spindle): 400 mm Spindle distance: 1,500 mm Turning length: 1,185 mm Max. workpiece weight: 150 kg Slide travel X1: 550 mm Slide travel Y1: 180 mm Slide travel Z1: 1,185 mm Slide travel B1: 240° Slide travel X2: 180 mm Slide travel Z2: 1,050 mm Slide travel Z3: 1,150 mm Max. milling spindle speed: 12,000 rpm Max. main spindle speed: 4,000 rpm Max. sub spindle speed: 3,200 rpm Rapid traverse rate, Slide 1 (X/Y/Z): 40 / 24 / 70 m/min Rapid traverse rate, Slide 2 (X/Z): 24 / 36 m/min Rapid traverse rate, Slide 3 (Z): 36 m/min Tool holder: HSK 63 Number of tool positions in chain magazine: 40 MACHINE DETAILS Control: SIEMENS SINUMERIK 840 D Dimensions & Weight Dimensions (L x W x H): 7,800 x 4,100 x 3,040 mm Machine weight: 16,500 kg Operating hours: 72,899 h Spindle hours: 39,361 h Bar feeder Model: COCCHE GIOVANNI CNC-DB 110 Year of manufacture: 2008 Serial number: CNCDB-08.306 Weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty and requires repair. - The Q2 axis (milling spindle tool changer) fails more frequently. - The X2 axis (guideways) moves slightly askew. - The guideways and drives show age-appropriate wear. External Reference: Bilstein – Lot 1

Condition: good (used), Year of construction: 2011, operating hours: 41,000 h, functionality: fully functional, turning length: 1,100 mm, turning diameter: 590 mm, HWACHEON HI-TECH 550B – CNC Turning Center Manufacturer: HWACHEON Model: HI-TECH 550B Year of manufacture: 09/2011 Machine type: CNC horizontal turning center Control: FANUC Series 0i-TD Serial number: M12535964LB CE certification: available Swing diameter over bed: 800 mm Max. turning diameter: 590 mm Chuck size: 375 – 457 mm Max. turning length: 1,100 mm Travel axes: X-axis travel: 345 mm Z-axis travel: 1,150 mm Spindle: Spindle power: 30 / 22 kW Spindle speed: 2,000 rpm Spindle torque: 1,608.7 / 993.1 Nm Bar capacity: 116 mm Rapid traverse: X-axis: 20 m/min Z-axis: 24 m/min Turret: Bjdpfoyzaklsx Ab Ielf Tool mounting: BMT-75 / BH Tool positions: 12 Tailstock: Tailstock diameter: 120 mm Taper: MT5 Coolant system: Tank capacity: 250 liters Machine weight: 9,700 kg Chip conveyor: Manufacturer: AME GmbH Type: SB 300 Tlg. 38.1 Year of manufacture: 2021 / 2023 Connection: 400 V / 50 Hz Weight: 305 kg Description: HWACHEON HI-TECH 550B CNC turning center in robust heavy-duty design with flat guideways. This machine is designed for machining large and heavy workpieces, as well as hard materials. The solid construction combined with the geared spindle allows for high cutting performance with stable machining. Equipped with a 12-position turret, tailstock, and chip conveyor. The machine is currently in operation at a renowned German machine builder and is available for immediate collection.

Condition: good (used), TERMOZ LYON Bledpfx Asm Dtncob Ief tour à repousse

Condition: ready for operation (used), Year of construction: 1988, operating hours: 36,452 h, Boley BDN 160 ZB including LNS Hydrobar bar feeder manuals various tools Bedpfx Abowwbats Iolf

Condition: excellent (used), Year of construction: 2018, operating hours: 21,500 h, functionality: fully functional, Tsugami BO205E-III Bljdpfx Ajwdru Ieb Ijf incl. Iemca Smart 320 loading magazine Conversion from long to short lathe possible High-pressure pump with 4 controllable valves Fire extinguishing system -available immediately-

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Equipment: rotational speed infinitely variable, Citizen M32-2M3 CNC Swiss-type Turning Machine Year of manufacture: 2002 Control: Mitsubishi Meldas 635 Max machining diameter: 32 mm 7 controlled servo axes: X1/Z1/Y1/X2/Z2/X3/Z3 4 driven tools on the vertical holder Bledpfx Asx Dncfjb Isf C-axis: main and sub spindle Including accessories: FMB Turbo 5-42 bar feeder Extraction system Parts conveyor 5 driven tools for turret 5 standard holders (turning/boring holders) for turret - Available immediately -

Condition: excellent (used), JBS guide bush pressure system suitable for Star Ecas 32 - on request the suitable maintenance unit can be delivered with it Bedpfepl U Efex Ab Islf

Condition: good (used), Year of construction: 2004, functionality: fully functional, Equipment: rotational speed infinitely variable, Citizen C16-VII CNC Swiss Lathe Year of manufacture: 2004 Control: Mitsubishi Meldas 635 Max. machining diameter: 16 mm C-axis: Main and sub-spindle Bsdpfsv Rhd Hox Ab Islf 5 controllable servo axes: X1/Z1/Y1/X2/Z3 4 driven tools on the vertical holder C-axis: Main and sub-spindle Includes accessories: LNS Express 220 loading magazine, 16 mm and 10 mm conversion kit Donaldson Torit extraction system Chip conveyor - Available immediately -

Condition: excellent (used), Year of construction: 2017, spindle bore: 8 mm, spindle speed (max.): 16,000 rpm, turning length: 125 mm, bar diameter (max.): 7 mm, Hanwha XD07 CNC Swiss-type lathe – condition: very good Iemca Elite 112 bar feeder High-pressure unit with 4 switchable valves Kraft und Bauer fire extinguishing system Max. machining diameter: 7 mm Main spindle speed: up to 16,000 rpm Sub spindle speed: up to 16,000 rpm C-axis: main and sub spindle Blodpfx Aoxw Nxusb Ief Tool stations Turning holders: 4 Face drilling stations: 3 Cross drilling stations: 3 Dimensions: 1520x910x1520 mm Weight: 1000 kg

Condition: excellent (used), Year of construction: 2016, spindle bore: 8 mm, spindle speed (max.): 16,000 rpm, turning length: 125 mm, bar diameter (max.): 7 mm, Hanwha XD07 CNC Swiss-type lathe – condition: very good Bljdjxw Nx Iepfx Ab Iof Iemca Elite 112 bar feeder High-pressure unit with 4 switchable valves Kraft und Bauer fire extinguishing system Max. machining diameter: 7 mm Main spindle speed: up to 16,000 rpm Sub spindle speed: up to 16,000 rpm C-axis: main and sub spindle Tool stations Turning holders: 4 Face drilling stations: 3 Cross drilling stations: 3 Dimensions: 1520x910x1520 mm Weight: 1000 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: rotational speed infinitely variable, Citizen R07-VI CNC Swiss-type lathe Year of construction 2015, in very good condition, annual maintenance has been carried out every year since new 2 identical machines are available, both ready for immediate delivery Control: Fanuc Max. machining diameter: 7mm Number of servo axes: 6 Z1/X1/Y1/X2/Y2/Z2 Number of C-axes: 2 main and sub-spindle Number of tool positions: 5x turning tool holders / 2x driven tool positions / 3x drilling stations front and rear Including accessories: Iemca Elite 112 EVO bar feeder Büchele SFB-100 high-pressure unit Blodoyk Iv Tjpfx Ab Ijf Kraft und Bauer fire extinguishing system

Year of construction: 2007, condition: ready for operation (used), - USED - 8-AXIS CNC LATHE WITH MILLING HEAD, DOWN TURRET HEAD AND COUNTER SPINDLE MAX ROTATING DIAMETER: 660 mm MAX TURNING LENGTH: 1495 mm MAX TURNING DIAMETER: 660 mm BAR CAPACITY: 65 - 65 mm SPINDLE: 35-5000 rpm; 22 kW; 254 mm COUNTER SPINDLE: 35-5000 rpm; 18,5 kW; 254 mm HEAD: CAPTO C6 ; -30°+195° ; 15-12000 rpm; 18,5 kW X-AXIS TRAVEL: 580 mm X2-AXIS TRAVEL: 150 mm Y-AXIS TRAVEL: 160 mm Z-AXIS TRAVEL: 1545 mm Z2-AXIS TRAVEL: 1490 mm B-AXIS TRAVEL: 1550 mm Bedpfjyy Thzsx Ab Ijlf RAPID FEEDS X-Y-Z: 38 - 26 - 38 m/min TURRET HEAD: 9 POS TOOL MAGAZINE: CHAIN-TYPE ; 80 POS HIGH PRESSURE COOLANT: 18 Bar CONTROL UNIT: MAZATROL MATRIX WEIGHT: 11800 Kg OVERALL DIMENSIONS: 5090 x 3270 x 2830 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; TOOL SETTER

Condition: excellent (used), Year of construction: 2000, turning diameter over bed 20 mm turning diameter over slide rest 1200 mm turning length 3.000 mm centre distance 3000 mm digital readout 4 - Achsen bed width 800 mm spindle bore 122 mm turning speed range 1,80 - 355 U/min power requirement 22 kW taper in tailstock-quill 100 (1:20) dia. of quill 150 mm quill stroke 350 mm voltage 400 V total power requirement 31 kW spindle nose Gr. 11, DIN 55027 weight of the machine ca. 10 t dimensions of the machine ca. 8,20 x 2,20 x 2,20 m - Serial No.: 75.217 Bodpfxeyy Sy Nj Ab Islf - Rapid feed for carriage - 4-Axis DRO-System SINO

Condition: excellent (used), Year of construction: 2011, Center height 330 mm Turning diameter over bed 660 mm turning diameter over support 430 mm center width 1500 mm bed width 400 mm spindle mounting DIN 55029 A 8 spindle bore 82 mm speed range, 3 steps 7 - 135, 30 - 550, 110 - 2200 rpm feed range X/Z 3000 / 6000 mm/min Bledpel D Rddjfx Ab Ief rapid traverse X/Z 4/8 m/min quill taper MK 5 Drive power approx. 9 kW dimensions L x W x H 3450 x 1750 x 1770 mm Weight 2850 kg Accessories / special features: - Cycle control make FAGOR 8055-i A TC with TFT color screen. - Electronic handwheels - Interface - 4-fold tool turret, programmable change by motor drive - 3 jaw chucks make BISON, diameter 300 mm - full enclosure, sliding doors electrically protected - coolant system - air conditioning for the control cabinet - central lubrication - machine feet - lighting - CE conformity Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2005, 1 used, well-maintained high-performance cycle lathe with FAGOR 8055 control, 8-position VDI 40 tool turret, constant cutting speed, pneumatic 3-jaw front chuck, and chip conveyor Manufacturer: MICROTURN, Origin Taiwan Model: Challenger BNC 2680X Year of manufacture: 2005 / Commissioned in 2006 Technical data: Center height: 325 mm Distance between centers: 2150 mm Swing diameter over bed: 650 mm Swing diameter over cross slide: 410 mm Swing diameter in gap: 870 mm Spindle speeds: 0 – 2,400 rpm Spindle bore: 82 mm Spindle motor: 15 / 22 kW Machine weight: 4,800 kg Accessories / Special Features: • Cycle control FAGOR 8055 with alphanumeric keypad o LCD color monitor o Graphical cycle simulation o 2 electronic handwheels • Pneumatic 3-jaw front chuck, make SMW, Ø 315 mm o By using this pneumatic front chuck, the entire spindle bore of Ø 82 mm remains available. With hydraulic chucks, the spindle bore is reduced by the required draw tube. • 8-position tool turret VDI 40 Bodpoyy N Rfefx Ab Islf • Hinged belt chip conveyor • Fixed steady rest • Automatic headstock lubrication • Automatic lubrication of longitudinal and cross slides • Tailstock • Coolant system • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1965, total length: 7,750 mm, total width: 1,400 mm, total height: 1,600 mm, Empty weight: 5.000 kg Bljdpsyy Ntmofx Ab Isf - Year: 1965 - Documentation available: No - CE certificate present: No - Serial number: 16628 - Drive system: Conventional - Power [kW]: 13.7 - Centre height [mm]: 300 - Swing over bed [mm]: 600 - Carriage turning diameter [mm]: 300 - Distance between centres [mm]: 6000 - Bed width [mm]: 400 - Spindle bore [mm]: 65 - Min. spindle speed [rpm]: 22.4 - Max. spindle speed [rpm]: 1000 - Options: Fixed steady, Quick-change tool post, Removable bed, Travelling steady, Three-jaw chuck - Swing over removable bed [mm]: 900 - Transport dimensions: 7750mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 5000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2008, Centre height: 445 mm Centre distance: 4000 mm Swing diameter over bed: 890 mm Swing diameter over cross slide: 550 mm Swing diameter in gap: 1150 mm Spindle speeds: 0 – 1480 rpm Spindle bore: 106 mm Spindle motor: 22 / 33 kW continuous duty / S6 (40%) Bsdpfeyy Nlpex Ab Ijlf Machine weight approx. 12,500 kg Accessories / Special features: • Cycle control FAGOR 8055 T with alphanumeric keypad o 10.4" LCD color monitor o Graphic simulation of cycles o Electronic handwheel for manual machine operation • 3-jaw chuck • 8-position tool turret • 2 fixed steadies with rollers • Movable control panel • Automatic lubrication of the headstock • Automatic lubrication of longitudinal and cross slides • Tailstock with hydraulically actuated quill • Coolant system • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2009, 1 used, very well-maintained high-performance CNC lathe with FAGOR 8055, 30° slant bed and chip conveyor Turning diameter over bed 500 mm Bledpsyy Nd Sjfx Ab Ief Turning diameter over cross slide 180 mm Max. turning length 460 mm Max. longitudinal travel 520 mm Bar capacity max. 52 mm Spindle speed up to 5,000 rpm Rapid traverse X-axis 30 m/min Rapid traverse Z-axis 30 m/min Tool turret 8-station Drive power 7.5 / 11 kW Dimensions (L x W x H) approx. 2700 x 1700 x 1650 mm Weight 3370 kg Accessories / Special Features: • CNC path control FAGOR 8055 • 8-station tool turret • Hydraulic 3-jaw chuck Ø 210 mm • Hollow spindle max. Ø 52 mm • Hinged belt chip conveyor • Coolant system • CE compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2015, 1 used, very well-maintained high-performance CNC lathe with FAGOR 8055i TC, 45° slant bed, and chip conveyor Manufacturer: MICROCUT, Origin: Taiwan Model: Challenger 92 HTL Year of manufacture: 2012 / Commissioned in 2015! Technical Data: Turning diameter over bed: 600 mm Turning diameter over cross slide: 450 mm Longitudinal travel: 1250 mm Bar capacity max.: 91 mm Spindle speed: up to 2,500 rpm Spindle mount: A2-8 Feed rate: up to 3,000 mm/min Rapid traverse (X/Z-axis): 24 m/min Tool turret: 8-position, VDI 40 Tailstock taper: MK 5 Drive power: 22/33 kW Dimensions with chip conveyor (L x W x H): 4614 x 1856 x 2016 mm Machine weight: 6,600 kg Chip conveyor weight: 600 kg Equipment / Special features: • CNC path control FAGOR 8055i TC Bljdpeyy Ndrofx Ab Ief • 8-position tool turret, VDI 40 • Hydraulic 3-jaw chuck Ø 305 mm • Hollow spindle max. bar diameter 91 mm • Hinged belt chip conveyor • Parts catcher • Coolant system • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2007, operating hours: 10,066 h, functionality: fully functional, CTX 410 V3 2-axis universal lathe with HEIDENHAIN Plus iT CNC control and SlimLinePanel - C-axis - Driven tools - AC main drive 21 kW, 240 Nm - Sauter disc turret - Partial hollow clamping device - Chip conveyor - Tailstock Turret disc with 12 tool stations, shank diameter 40 mm according to DIN 69880 instead of diameter 30 mm Bar machining package consisting of: - Hydraulic hollow clamping device Pull tube inner dia. max. 66 mm - Workpiece removal unit, pneumatically swiveling for parts Ø65 mm x 120 mm long, - 4-color signal light (Note: Additional connection for bar feeder or Bjdpfoyx Ax Tex Ab Iolf bar loading magazine required)

Condition: used, operating hours: 11,562 h, total height: 1,900 mm, total length: 5,600 mm, total width: 2,000 mm, Empty weight: 8.500 kg Price: On request - Documentation available: No - CE certificate present: No - Operating hours: 11562 Blodpswp H Efofx Ab Ief - Drive system: Conventional - Power [kW]: 30.0 - Centre height [mm]: 500 - Swing over bed [mm]: 1000 - Distance between centres [mm]: 3000 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 2.24 - Max. spindle speed [rpm]: 450 - Transport dimensions: 5600mm x 2000mm x 1900mm (l x w x h) - Transport weight [kg]: 8500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1998, total length: 2,600 mm, total width: 1,500 mm, total height: 2,100 mm, Empty weight: 1.500 kg - Year: 1998 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: P30162 - Drive system: Teach-in - Control system brand: Fanuc - Power [kW]: 7.5 - Centre height [mm]: 200 - Swing over bed [mm]: 400 - Carriage turning diameter [mm]: 245 - Distance between centres [mm]: 1250 - Bed width [mm]: 320 - Spindle bore [mm]: 55 - Min. spindle speed [rpm]: 15 - Max. spindle speed [rpm]: 2500 - Options: Three-jaw chuck, Removable bed - Swing over removable bed [mm]: 585 - Transport dimensions: 2600mm x 1500mm x 2100mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bsdpfxjx Ad Uzo Ab Ijlf Lukas van Rossum

Condition: used, total height: 2,500 mm, total length: 5,000 mm, total width: 2,200 mm, Empty weight: 5.500 kg Price: On request - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 12598 - Drive system: Teach-in - Control system brand: Fagor - Control system type: 8055 - Power [kW]: 15.0 - Centre height [mm]: 350 - Swing over bed [mm]: 700 - Carriage turning diameter [mm]: 425 - Distance between centres [mm]: 2000 - Bed width [mm]: 450 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 310 - Max. spindle speed [rpm]: 2000 - Max. workpiece weight [kg]: 4000 - Options: Digital readout, Removable bed - Type of digital readout: Heidenhain Manualplus - Control: CNC - Transport dimensions: 5000mm x 2200mm x 2500mm (l x w x h) - Transport weight [kg]: 5500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bjdpfxownhm Io Ab Ijlf Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum