Used Jpt 310 for sale (2,209)

Condition: good (used), For sale: PWB Swiss measuring device, model TOOL MASTER 310 Very good condition, complete, ready for operation Package includes: • TMA 21 control panel • LED displays • Dial gauge • Measuring socket for holders Features: • X and Z axis measurement • Tool setting and calibration for CNC tools Iodpfx Aow Humlohveap • Easy operation • Length and diameter measurement Original user manual included Brand: PWB Swiss Model: Tool Master 310

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, REX HOMS-310-K Four-sided Planer Year of manufacture: 1980 Serial number: 18.568 Power: 91.69 kW It has not been used since 2021. The machine was stored in a closed production hall for the entire period and is fully functional. After purchasing the machine, the electrical cables were replaced with new ones. We rate the technical condition as very good - visually there are visible traces of use, but technically everything works properly. The reason for the sale is the end of glued wood production. Maximum working width: 305 mm Iasdpowfqh Aefx Ahvjp Minimum working width: 50 mm Maximum workpiece height on 2 sides: 310 mm Maximum workpiece height on 4 sides: 160 mm Minimum workpiece height: 17 mm driven upper and lower feed rollers

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, working width: 1,935 mm, number of spindles: 40, plate height: 350 mm, working length: 6,200 mm, number of axes: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge tape magazines: 3 Number of tool positions in tool magazine: 22 (located at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X direction: 4 Spindles for horizontal drilling in Y direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Suction cups for securing the workpiece Safety mats at the front Vacuum pump Waste chip conveyor Fixed groove unit for slotting in X direction Iodoyqx U Hspfx Ahveap The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the item prior to collection and assumes responsibility for installation, securing, and operation of the machine at the place of destination. External reference: 8105

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Mill Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Iodpeytr Hbofx Ahvjap Spray unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial data. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the destination. External reference: 6216

Condition: excellent (used), Year of construction: 1994, center height: 100 mm, grinding length: 380 mm, total width: 1,500 mm, total length: 1,300 mm, total height: 1,350 mm, grinding diameter: 200 mm, spindle speed (max.): 1,800 rpm, overall weight: 2,100 kg, pivoting range: 10 °, Centre height: 100mm Grinding Ø: 200mm Grinding length: 380mm Grinding stone dimensions:300 x 50 x 127mm Grinding stone speeds: 1800Rpm Table inclasement: 10° Tailstock: 4Mk Length: 1300mm Width: 1500mm Height: 1350mm Iaedpfxsyu Nqgj Ahvop Weight: 2100kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2017, table load: 200 kg, table length: 650 mm, overall weight: 240 kg, table height: 400 mm, Horizontal work load 200 Kg Vertical work load 100 Kg Torq 407 Nm Runout 0.025 mm Gear Ratio 72:1 Timing 2:1 Iedpfx Ajyu Nb Eehvoap incl. Tailstock MK 4 incl. Driver incl. Cable   Table Ø: 315mm Table load: 200 Rotation B-Axis: 0.001° Rotation speed B-Axis:4500Omw/min. Length: 650mm Width: 250mm Height: 400mm Weight: 240kg

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 NEW (in 2024) Numerical Control EDGETEQ MOD - Power Touch (WoodCommander) Iasdpfoyt Izbox Ahvep Adjustable Feeding speed up to 25 m/min In-feeding system EZ 14 Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Glueing Unit (P.U.R. Glue + Quick Melt system) Band Pressure zone, adjustable by N.C. Edge coils supporting unit (with No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,5 ca.) Pneumatic swivelling and adjustment Rough Trimming unit BF 20 (2 x Kw 1,5 ca.) Multi Function Unit (Profile contour Trimming) FK 11 (2 x Kw 0,4 ca.) Profile edge scraping unit Finish processing unit (Glue scraper + Buffing unit) FA 11 Panels Return System "LIGMATECH" Mod. ZHR 541/L/095 (with Portal bridge and 360° rotating vacuum head)

Condition: used, functionality: fully functional, mileage: 353,263 km, first registration: 05/2017, fuel type: diesel, wheelbase: 6,300 mm, brakes: engine braking, color: white, gearing type: automatic, Equipment: ABS, airbag, Iveco Stralis 310 Schmitz refrigerated box with Carrier cooling unit and tail lift. Refrigeration unit: Carrier SUPRA 1150 Schmitz box dimensions: 8.90x2.47x2.60m Tail lift: Dautel, 1,500 kg capacity First registration: 05/2017 Mileage: 353,263 km Iedpfx Ajya Dkxjhveap Wheelbase: 6,300 mm Engine brake TAILORED FINANCING OR LEASING OPTIONS AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS IN OUR GROUP: DOMENICO TRUCK SRL, NAPLES LOCATION DOMENICO ESPOSITO S.P.A., EBOLI (SA) LOCATION - OFFICIAL DEALER FOR: MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 SHOWROOM OPENING HOURS: MONDAY-FRIDAY 8:30 AM – 7:00 PM SATURDAY 8:30 AM – 2:00 PM WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL / INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man – Nissan V8 – Intarder- 770s – Limited Edition – 660 S Semi-trailer – Refrigerated Semi-trailer – Tipper – Lamberet – Schmitz – Isuzu – Flatbed – Crane – Tipper body – 4 axle – 4 Rear Axles – Tway – T-Way-540-460 hp – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition – Curtain Side – Box – Tail lift – Refrigerated Cell – Insulated with Fridge – Van Domenico Truck srl shall not be held liable for any discrepancies in technical specifications, equipment, or features that may, in some cases, differ from those stated in the description. We invite you to verify the characteristics of each specific vehicle.

Condition: good (used), Year of construction: 1992, For sale is a used Kity AD-310 surface planer and thicknesser with a planing height of up to 230 mm. The machine is in good condition and has been serviced and inspected by our professional staff. Technical data: - 3-knife cutter block - Planing width: 310 mm - Surface planer table length: 1550 mm - Max. workpiece thickness: 230 mm - Includes mortising attachment Iedpjyttckofx Ahvoap - Motor power: 2.2 kW / 3 HP - Year of manufacture: 1992 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Related terms: surface planer, thicknesser, planer, planing, thicknessing Reference: R-Y00MG

Condition: good (used), Year of construction: 2011, In good technical condition and fully operational. Year of manufacture: 2011. Maximum cutting length: 3100 mm. Maximum sheet capacity: 11373 up to 6 mm. Cutting blades: INOX. Automatic adjustment of cutting clearance and blade angle. CNC control: Safan Touch Screen TS100. Ijdeytb Izopfx Ahveap Machine weight: approx. 6 tons. Accessories: 2 x additional sets of INNOX spare blades (one set brand new) 1 x set of spare pistons 1 x spare computer TS201C (new – unused)

Condition: good (used), functionality: fully functional, Year of construction: 2012, Expected in stock in approx. 3 weeks Safan M Shear 310 - 6 Capacity: 3100 x 6 mm TS1 Inox Touch control Iedpfx Ajytb Tdohvsap Return to sender Extra long back gauge of 1500 mm Scrap flap option Year of manufacture: 2012 Images are of another identical machine.

Condition: excellent (used), Year of construction: 2008, Biesse Artech Levia 310 - 1350. YoM: 2008. Iasdpfxsyuy R Ds Ahvep UK Price £13,650 + VAT Machine has been used for pre-sanding and de-nibbing in the paint shop. Now surplus to requirements due to closure of the paint shop. Can also Calibrate and sand solid woods. Single head / belt construction. Working width 1350mm. Thickness between 3mm & 200mm. Combi Working Unit Grooved steel Calibration Roller. AND Electronic Sectioned Pad. Cleaning brush on outfeed. Vacuum table to increase panel holding. Compressed air belt cleaning. Automatic panel thickness setting. Extended infeed rollers.

Condition: used, mileage: 558,677 km, power: 228 kW (309.99 HP), first registration: 01/2015, fuel type: diesel, number of seats: 38, gearing type: automatic, emission class: euro6, color: other, total length: 12,000 mm, total height: 3,200 mm, Year of construction: 2015, Equipment: ABS, air conditioning, = Additional options and equipment = Isdpfjyuv Nvjx Ahvoap - Air conditioning - Webasto heater = Further information = Damages: none = Company information = We are an international company based in Belgium, near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for buying and selling used buses, featuring an extensive parking area serving as our showroom. We always have a large selection of buses in stock—various brands, capacities, models, and price ranges. We can find the right touring coach, school bus, or city bus tailored to your requirements or budget. All information is provided without guarantee. Subject to errors, prior sale, and typos. Viewing hours for used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mówimy po polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Year of construction: 2003, condition: ready for operation (used), - USED - 7-AXIS SYNCHRONIZED CNC PRESS BRAKE    AXIS: Y1 - Y2 - X1 - X2 - R - Z1 - Z2 BENDING LENGTH: 3100 mm TONNAGE: 130 ton UPPER BEAM TRAVEL: 400 mm APPROACH SPEED: 150 mm/sec RETURN SPEED: 150 mm/sec WORKING SPEED: 1-10 mm/sec MOTOR POWER: 18,5 kW Iaedpjyry Svofx Ahvsp WEIGHT: 14200 Kg OVERALL DIMENSIONS: 4435 x 2734 x 3095 mm NOTE: INTERNAL AND EXTERNAL POSITIONERS

Year of construction: 2011, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 330 mm MAX TURNING LENGTH: 450 mm Iedsyry S Aspfx Ahvjap MAX TURNING DIAMETER: 200 mm BAR CAPACITY: 51 mm SPINDLE: 5000 rpm; 11-16,5 kW X-AXIS TRAVEL: 160 mm Z-AXIS TRAVEL: 450 mm DRIVEN TURRET HEAD: 12 POS CONTROL UNIT: SIEMENS 810D WEIGHT: 3400 Kg OVERALL DIMENSIONS: 4325 x 2071 x 1742 mm ACCESSORIES: SWARF CONVEYOR

Year of construction: 2011, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 330 mm MAX TURNING LENGTH: 450 mm Iajdpfx Ahjyry S Nsvop MAX TURNING DIAMETER: 200 mm BAR CAPACITY: 51 mm SPINDLE: 5000 rpm; 11-16,5 kW X-AXIS TRAVEL: 160 mm Z-AXIS TRAVEL: 450 mm DRIVEN TURRET HEAD: 12 POS CONTROL UNIT: SIEMENS 810D WEIGHT: 3400 Kg OVERALL DIMENSIONS: 4325 x 2071 x 1742 mm

Condition: used, Year of construction: 2014, functionality: fully functional, MULTI-BLADE SAW FOR SALE Ijdeyup Nvjpfx Ahvoap

Condition: used, functionality: fully functional, mileage: 591,000 km, fuel type: diesel, Year of construction: 2017, IVECO Stralis Hi-Street, year 2017, approximately 591,000 km, automatic transmission. 9.30m box body with DHOLLANDIA tail lift. Cruise control, reversing camera. 12 MONTH WARRANTY ON ENGINE, GEARBOX AND DIFFERENTIAL INCLUDED IN THE PRICE. Ijdpeyupuxsfx Ahveap

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Perkins 1706J-E93TAG2, General information Field of application: Construction Weights Empty weight: 4.103 kg Functional Generator capacity: 310 kVA Other information Fuel consumption: 46.9 Liter / Hour at 75% Load Generator: FG WILSON LL5114N Frequency: 50 Iodpfxex S Um Ns Ahvoap Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 667 l Transport dimensions (LxWxH): 4,085x1,514x2,277 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information

Condition: used, mileage: 148,267 km, power: 77 kW (104.69 HP), first registration: 06/2018, fuel type: diesel, overall weight: 3,140 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,767 mm, total width: 2,200 mm, total height: 2,900 mm, loading space length: 3,205 mm, Year of construction: 2018, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Subject to errors and prior sale! Internal number: 1155. JS47555 ----EQUIPMENT - Speed limiter - 6-speed gearbox - Electronic ABS with EBD - Driver airbag - Manually adjustable exterior mirrors (2) - On-board computer - Flat roof - Overhead storage compartment in front roof area - Headliner in driver's cab Isdpfx Ahox Ndmgsvoap - Rev counter - ESP with TSC - Electric front windows - Ford Easy Fuel system - Glove compartment with lid - Interior lighting with delayed switch-off - Solid paint finish - Adjustable steering column - Diesel particulate filter - Dropside body: Standard (wide) - Radio pre-installation - Dipped beam headlights - Power steering - Seat belts - Seat Package 4 - Daytime running lights - Recirculation control - Immobilizer - Heat-insulating, lightly tinted glazing - Central locking with remote control... and much more. ----The vehicle is unsanitized / not cleaned or prepped! Nationwide delivery available for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as a trade-in. Financing / leasing available with or without down payment! Do you have any questions? We are happy to advise!

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements depth 7755 mm Iasdsx D Nqwspfx Ahvjp This HOMAG Optimat KAL 310 was manufactured in 2007. It features a left-hand version edgebander with a maximum workpiece thickness of 60 mm and a feed speed of up to 24 m/min. Equipped with a PU edge gluing system and PowerControl PC 22 unit, it spans 7755 mm in length and handles edge thickness up to 3 mm. Consider the opportunity to buy this HOMAG Optimat KAL 310 edgebander. Contact us for more information. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2010, This HOMAG KAL 310/7/A3 was manufactured in 2010. A used single-sided edge banding machine featuring a 28-position ISAS edge magazine, PU gluing unit, and Boomerang return system. It includes a joint milling unit with two motors and a PU 34 gluing system with a capacity up to 6 kg/h. Ideal for precise edge banding applications. Contact us for more information about this machine. Application Types Iasdpfx Ahex D Ra Tsvep Edge Banding

Condition: ready for operation (used), Year of construction: 2018, Main Drive Number of axis 5 Iaedpfjx D I H Rjx Ahvep Table Table load 227 kg This 5-axis HAAS TR-310 was manufactured in 2018. It features a table diameter of 310 mm, a maximum part swing of 787 mm, and can handle loads up to 227 kg. With a maximum rotation speed of 50°/sec and travel range of ±120°, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the HAAS TR-310 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2003, operating hours: 5,137 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 202 mm, travel distance Z-axis: 450 mm, spindle motor power: 12,000 W, total height: 1,730 mm, total width: 1,563 mm, overall weight: 3,500 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D powerline, product length (max.): 4,000 mm, number of axes: 3, This 3-axis Gildemeister CTX 310 was manufactured in 2003. It features a maximum turning diameter of 246 mm and a turning length of 445 mm. The machine is equipped with a spindle power of 12 kW and a maximum spindle speed of 6000 rpm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 310 horizontal turning machine we have for sale. Contact us for further details. • Availability: 2 units available • Spindle • Nose: FL 140 h5 • Max torque: 115 Nm (153 Nm at 40% S6) • Bore: 69 mm • Chuck diameter: 170 mm (optional 210 mm) • Bar capacity: Ø 50 mm • Working range • Swing over bed: 500 mm • Max turning diameter: 246 mm • Max turning length: 445 mm • Distance between centers: 600 mm • Turret and tools • Turret type: VDI 30 • Tool stations: 12 • Driven tools speed: 4200–5000 rpm (depends on control: Fanuc/Siemens/Heidenhain) • Driven tools power: 3.3–4.4 kW • Feeds and axis data • Rapid traverse (X/Z): 24/30 m/min • C-axis rapid: 100 rpm • Feed force (X/Z): 450 daN • Resolution (X/Z): 0.001 mm • Bed • Inclination: 45° Iasdpfx Aheympcaovjp • Material: Cast iron • Electrical and auxiliary • Supply voltage: 400 V (±10%), 50 Hz • Total installed power: 24 kVA • Hydraulic system pressure: 50 bar • Coolant tank capacity: 175 liters • Control systems (options): GE-FANUC 21i-TB, Siemens 840D, Heidenhain 4290 E Additional equipment • Chip conveyor (both units) • Extraction unit (one unit)

Condition: ready for operation (used), Year of construction: 2005, total height: 2,400 mm, total width: 1,600 mm, overall weight: 1,600 kg, product length (max.): 2,300 mm, number of axes: 3, Die-sinking edm machine manufactured in 2005. This Exeron 310 machine features a table dimension of 550 × 350 mm and a maximum workpiece weight capacity of 500 kg. With a robust design, it weighs 1,600 kg and has overall dimensions of 2,300 x 1,600 x 2,400 mm. Consider the opportunity to buy this Exeron 310 die-sinking edm machine. Contact us for further details. Iajdpfxoyin E So Ahvop • Table dimensions: 550 x 350 mm • Tank dimensions: 750 x 550 x 300 mm • Max. workpiece weight: 500 kg