Gas flame treatment plant Arcotec FTS 4005 DR som, year KW42/2017, machine is new and unused and has CE marking, operating voltage 400V, power 7kw, gas type preset propane it can also be used natural gas,
Burners 4x MB3-500S/2E, treatable material are metal sheets,
The gas flame treatment plant is intended exclusively for the thermal pre-treatment of metal sheet surfaces in order to improve the adhesion of ink, laughter, adhesives, foam, etc. Machine has cost over 200000€!!
for the pretreatment of webs with normal lubricant content (max. 600 ppm)
working speed: 200 m/min
Surface energy: 50-55 mN/m ᐸᐳ depending on film
Dose: 9.4 Wmin/m2
Pre-treatment on both sides, optionally switchable (top-bottom-both sides)
pre-treatment width: max 1600 mm
roller width: max. 1800 mm
Generator: Type G60S max. output power 6000W; mains supply 400V+/-10% 50/60Hz ; temperature monitoring, roll rotation monitoring, power control, set point limitation, more
Cleaning machine parts / spray cleaning system
automatic working hot water part washing machine
Stainless steel washing pump
Circulating 4-sided sprinkler system with stainless steel nozzles
-Tank capacity: 2000 liters
-Heating: electrically adjustable (RT-90 ° C)
System dimensions (LxWxH): 3300 x 1000 x 1100h mm
Wash timer freely adjustable (minutes and hours)
complete cleaning machine (inner and outer lining) made of stainless steel 1.4301 / 316
Inlet filter as pump protection
MULTI-TREAT SPRAY PRE TREATMENT MACHINE
Multi-Treat spray pre-treatment machine is used for surface treatment of materials to be painted. It provides the possibility of working up to 8 different chemicals with tanks in varying numbers according to the process. All tanks are made of 316 SS and isolated.
According to the process steps, the number of tanks and how many tanks are heated are determined.
The heating inside the tank is provided by gas heat exchangers. The processes can be... more
Chamber pretreatment 3-stages, multimetall, waste water pump,
Stage 1, natural gasheated, max. 60degr.C
Stage 1, degrease with nannoceramic (state of the art)
Stage 2, rinse
Stage 3, DI rinse
manual sliding door
Siemens software with electrical cabinet
Reverse osmosis system with tank and pump
max. part dimensions: width 2, hight 2m, length 6m
max. part weight: 200kg
Connection prepared to manual transport or automated conveyor system more
Automatic line for ultrasonic cleaning, degreasing and passivation of aluminum and steel parts. The line is intended for treatment of hydraulic manifolds and is useful for cleaning and passivating complex pieces with many deep or blind holes. Wastewater generated on the line is treated on a ion exchange circular device Q = 3 m3/h.
Dimensions: 13000 x 4500 x 3600
Tank dimensions: 1000 /650 /800
Mode of operation: automatic
Heating: electric heaters
Wastewater treatment method: io... more
Surface treatment of plastic films by flame flames
Area of application: Backwards in the solar industry
Machine unit existing main components
• Fa. PSA Turn rolling & Turn Wettler 2200/12 PSA W/ARW 2200/12 – Fyling Splice Komm. 2011-001.1
• Fa. Hill/Jungwirth burner unit for gas//air mixture
• Erhardt + Leimer Railway edge control
• Fa. OCS camera system to detect error
• Fa. Semket labeling system labeling the errors
• GWK Tempering devices for rolling cooling SKL SP HC300... more
Fully automatic spare parts cleaner Buhral with touch screen control.
Complete stainless steel and tested for operation.
Bwj 2004 New then 54,000, - ex VAT. Now price 8250, - ex VAT.
Wrong in new condition, with instruction book.
Control arm with large screen, with touchscreen and overview of processes.
Two stock tanks:
wash water and rinse water tank:
* Wash water space 70 x 130 cm level 50 cm Is equipped with a drawer where a filter can be laid, optionally product composition.
Surface cleaning and coating process is carried out before painting with stainless tanks manufactured in accordance with the process in dip type washing systems.
Tanks are reinforced with profile outer construction and insulation is provided with glass wool or rock wool.
With the anti-overflow design, the flow of chemical out of the tanks is prevented and chemical loss is prevented with the feedback system.
Chemical discharge before cleaning is provided through the stainless valves located un... more
Dip pretreatment systems for a wide range of product types.
As dip decoating line with modifications also available.
Brand new soft-decoating chemistry could also ordered together
with the line.
Please contact us for more information.
Schlaue Nozzle System
Quick and easy assembly with clamp. No tools required. Allround swivelling by 30. Easy adjustment and cleaning.
Degreasing, phosphating in surface treatment.
Clamp : Stainless Steel 301 SS
Sealing : EPDM
Cylinder pin, screw and screw unit: 316 SS
Body, ball retainer cap : PP, reinforced.
Nozzle, ball joint : PP more
Parts Cleaning Machine / Combined Spray Cleaning System Type L101 HP
**Automatic working hot water Part washing machine with basket drive by gear motor, stainless steel washing pump (Fab. Lowara), spray system with stainless steel nozzles
**additional manual cleaning with high-pressure gun and foot switch, air-blower gun, large viewing window with cuff gloves, LED interior lighting
- Basket diameter: 910 mm
- Useful height: 490 mm
- maximum loading weight: 200 kg
- Spray pressure (washing... more
Automatic Spray chemical pretreatment tunnel.
Degreasing, Iron phosphate, Bonderite, Deionized Rinsing proccesses can be applicable.
Chemical resistant nozzles used for washing.
All parts ( Pumps, Valves, Pipes, Fittings, nozzles, tanks, heating exchangers, tunnel material ) are chemical resistant.
3016 L stainless steel used in chemical areas.
Proccess quantity determined according to chemical which will used in system.
Dimensions determined according to product which is maximum... more
Hot - Cold High Pressure Washers
Whether for pressure washers, automobile cleaning as well as fuel stations, washing lubrication services, chicken-turkey farms, integrated facilities, mandra, milk collection centers, olive oil and flower oil factories, cattle-sheep farming industry, heavy duty machines-truck-truck-bus repair shops , firefighters, transport companies, custodians, highway regional maintenance workshops, village services, mining and construction sites, military, airports, construct... more
The Machineseeker trust seal gives buyers the ability to detect whether they have to do it with a trusted seller at a glance .
What do we check?
Check of the trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of the telephone accessibility the main phone number.
Credit report must not contains negative criteria.
Buyer complaints can lead to the withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no right to the grant of the Machineseeker trust seal. In addition, the seal can be removed.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.