Condition: used, Year of construction: 2000, Gildemeister CTX 400 S2 Ncodpfx Alezgupkonsu Year of manufacture: 2000 2-axis machine (X and Z) 12-tool turret, VDI30 Fanuc 21iT control system Tailstock Chip conveyor included Very good condition, machine comes from a school Operating hours: 14,000

Condition: used, Year of construction: 2005, MAZAK QTN 200M, year 2005 Mazatrol Fusion 640T Nsdpfxezgumvj Alnscu C-axis driven tools Chuck: 200mm Spindle bore: 65mm Turning length: 500mm Turning diameter: 380mm 12-position turret Tailstock Measuring probe -Chip conveyor -4 driven toolholders (2/2 configuration) -8 standard toolholders -Machine documentation

Condition: like new (used), Year of construction: 2016, operating hours: 36,392 h, functionality: fully functional, turning length: 1,260 mm, turning diameter: 420 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 280 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 1,370 mm, bar diameter (max.): 90 mm, spindle diameter: 91 mm, Equipment: documentation/manual, CNC controller: Mitsubishi M730UM Capacity X-axis travel mm: 280 Y-axis travel mm: ±60 Z-axis travel mm: 1370 Turning length mm: 1260 Max. turning diameter mm: ø 420 Swing over bed mm: ø 978 Swing over cross-slide mm: 808 Bar work capacity mm: 90 Upper turret Ncedpfx Ajzgu Dujlnju Number of tool slots St .: 12 Speed ​​driven tools RPM: 10000 Main spindle Speed ​​spindle rpm: 3000 Drive power spindle kW: 22/18.5 Spindle bore mm: 91 Chuck type: 15" Manufacturer: KITAGAWA Spindle nose: IS A2-8 Tailstock Tailstock travel mm: 1284 Holder: MT-5 Coolant system High-pressure bar: 10 Equipment Chip conveyor blowing air through spindle center selectable via M-function Tool measuring arm Mist collector Steady rest Workarea light Chuck foot switch (double) for main and counter spindle Oil skimmer Custom Macro common variables (200) Basic machine dimensions / weight Length mm: 5300 Width mm: 2500 Height mm: 2400 Weight kg: 8900

Condition: used, Year of construction: 1999, Technical details: Ncodpfxezguk Io Alnou turning diameter over bed: 400 mm turning dia. over face-slide: 250 - 300 mm turning length: 450 mm longitudinal traverse (z-axis): 450 mm facing movement (x-axis): 210 mm control: TX8H spindle passage: 65 mm revolution per minute: 5.000 U/min feed:: 0,001 - 5.000 mm/min. tool turret - number of stations: 12 operating hours - idle run: - h operating pressure: 6 bar total power requirement: 36 kW Weight approx.: 8 t dimension machine xH: 3,0 x 1,8 x 2,0 m dimensions of hydaulic: 0,8 x 0,6 x 1,2 mm

Condition: excellent (used), Year of construction: 2013, Spinner TC600-65MC cnc lathe with C-axis and driven tools Year: 2013 Technical details: Control SIEMENS 840D-SolutionLine Spindle speed range: 4500 rpm Spindle motor power: 11 kW/ 16.5 kW Torque: main spindle (siemens, s6 40%) 301 Nm X-Axis Movement: 230 mm X-Axis Rapid Traverse: 15 m/min Z-Axis Movement: 740 mm Z-Axis Rapid Traverse: 24 m/min Center distance: approx. 600 mm Max turning diameter: 310 mm Workpiece diameter over bed: 425 mm Number of turrets: 1 Tool taper: DIN 69880/ VDI30 Number of turret stations: 16 Driven tool holder positions: 16 C-axis Speed of rotating tools: 6000 1/min Driven tool power: 6 kW Tailstock: Quill stroke: 120 mm Adjustment travel: 475 mm Machine dimensions: 2730x1500x1620mm Machine weight: 4500 kg Accessories/options: - hydraulic chuck with jaws - collet type chuck with collets - static tool holders - driven tool holders - Renishaw tool measuring arm - Swarf conveyor - High pressure coolant system - Bar feeder - Documentations Njdpfx Aljy Sv Egsnocu

Condition: good (used), Year of construction: 1986, turning diameter: 3,300 mm, year of last overhaul: 2005, Vertical Turning Lathe SC33 CNC Manufacturer: TITAN (Romania) YOM: 1986 Complete revision of the machine in 2005 Main technical data: CNC Siemens 802D Faceplate diameter: 3000mm Max. turning diameter: 3300mm Nedpfjw Eplaox Alnjcu Max. working height: 3000mm Max. workpiece weight: 18000kg Table speed range: 1.02-92 RPM Working feed range: 0.05-5 mm/rev. Main motor power: 55 kW Overall dimensions: 5600 x 5300 x 5400 mm Weight: 47350 kg The machine is under power.

Condition: used, Year of construction: 2022, machine/vehicle number: 710370, travel distance X-axis: 180 mm, j.stumpf [at] ivg.auction Machine data • Year of manufacture: 2022 • Serial number: 710370 Travel distances Nsdpjzgrw Eefx Alnjcu • X-axis: 180 mm • Z1-axis: 260 mm • Z2-axis: 292 mm Tool system • Tool changer: 12-position • Tool holder: VDI 25 Additional units • Compressed air filter unit GÖRING DSL 02D-SF-2-MBL, nominal flow rate approx. 900 m³/h • Cooling unit HYDAC RFCS-AH-030, year of manufacture 2021, serial number 2300040370 • Hydraulic unit KNOLL TG 30-04/07533-1, year of manufacture 2022, serial number 1570792 • Hydraulic cooling unit BKW ET22V-134-B-DI, year of manufacture 2022, serial number 834179 • Chip conveyor KNOLL 320 S-1/225, year of manufacture 2022, serial number 2204044

Condition: excellent (used), Year of construction: 2018, Universal lathe Seiger SLZ-620E Machine no. 4758 Year of manufacture 2018 Control system Siemens 840D Solution Line with Operate user interface (incl. Ethernet interface) Distance between centers 2000mm Swinging diameter over bed 660mm Swinging diameter over cross slide 435mm Travel of cross slide 375mm (position measurement via glass scale) Headstock according to DIN55027 GR.8 Spindle diameter in the front bearing 130mm Spindle bore 93mm Morse taper of the main spindle 100 Drive power 60/100% ED 30/22kW Spindle speed 1-2500 rpm Max. torque on the spindle approx. 2000 Nm Feed force Z-axis 14,000 N Feed force X-axis 10,000 N Feed range longitudinal and facing mm/rev Rapid traverse speed X/Z 10/8 m/min Tailstock MK5 Quill travel 180mm Quill diameter 90mm Workpiece weight between centers 1000kg Workpiece weight in chuck 500kg Machine weight approx. 4900kg Machine dimensions L x W x H 4.100/2.350/1.900 Ncsdezgrtgspfx Alnsu Accessories/Equipment: - 3-jaw chuck D320mm - 15 tool holders - "Drill stand" drill rod clamping holder D60mm - Chip guard and movable protective cover with viewing window - Machine lamp - Coolant system (coolant pump reinforced, 5.4 bar) - Parat 4-position turret (manually operated) - Glass scale X-axis - Documentation - Chip conveyor - Hand-held flushing gun - 1x steady rest, clamping range 20mm to 150mm - 1x steady rest, clamping range 120mm to 270mm The machine is in very good condition.

Condition: excellent (used), Emco Super 11 CD Year of manufacture: 2004 (CE) Distance between centers: 650 mm Height of centers: 140 mm Swinging diameter over bed: 280 mm Swinging diameter over cross slide: 170 mm Spindle speeds: 55, 110, 200, 300, 410, 600, 1100, 2200 rpm Longitudinal feeds: 14 (from 0.03 – 0.3 mm/rev) Cross feeds: 14 (from 0.015 – 0.15 mm/rev) Tailstock quill travel: 80 mm Connection: 16 A / 380 V Dimensions: 1,350 x 800 x 1,240 mm (W x D x H) Multifix A Electrically interlocked chuck guard 3-jaw chuck Ø140 The machine is in very good condition. Ncjdjzgrkxspfx Alneu

Condition: good (used), Year of construction: 2013, Main and counter spindle C-axis on main and counter spindle 2 x 12-position turret VDI 40 Y-axis Chuck flushing device Tool monitoring Brankamp Coolant system 980 liters with belt filter Conveyor belt Oil mist separator Chip conveyor Ncjdpfxsy Ivyio Alneu without bar feeder

Condition: used, Year of construction: 2007, functionality: fully functional, 6-spindle Nodpfx Aloyymbzenocu Hainbuch Spanntop Axfix D22 ARTIS integrated process monitoring system Slide units - Slide unit 1.1: X-axis fixed, Z-axis NC-controlled - Slide unit 2.1: X-axis fixed, Z-axis NC-controlled - Slide unit 1.2: X-axis and Z-axis NC-controlled - Slide unit 2.2: X-axis and Z-axis NC-controlled - Slide unit 3.1: X-axis and Z-axis NC-controlled - Slide unit 3.2: X-axis and Z-axis NC-controlled - Slide unit 4.1: X-axis and Z-axis NC-controlled - Slide unit 4.2: X-axis and Z-axis NC-controlled - Slide unit 5.1: X-axis and Z-axis NC-controlled - Slide unit 5.2: X-axis and Z-axis NC-controlled - Slide unit 6.1: swiveling axis and Z-axis NC-controlled - Slide unit 6.2: X-axis and Z-axis NC-controlled Synchronization device, position 6.1 Part discharge via chute Workpiece conveyor belt at spindle position 6 High-pressure pump Fire extinguishing system Coolant cleaning system Hinged belt chip conveyor Flat loading magazine: IEMCA SIR MS 22/33 P

Condition: excellent (used), Year of construction: 2009, operating hours: 28,742 h, functionality: fully functional, bar passage: 65 mm, FANUC Series 31i-Model A 3 turrets Parts conveyor Njdoydmbujpfx Alnocu Magazine Further details on request

Condition: good (used), Year of construction: 2015, Main and counter spindle 3 turrets Backside machining Fire extinguishing system Kraft & Bauer High-pressure system Büchele Bar feeder FMB Turbo 2-20 Njdeyx Tk Topfx Alnscu

Condition: excellent (used), Year of construction: 2007, operating hours: 77,264 h, functionality: fully functional, number of spindles: 6, spindle speed (max.): 10,000 rpm, bar diameter (max.): 22 mm, Equipment: rotational speed infinitely variable, 6-spindle machine Part discharge via chute at spindle position 6 Option for polygon turning Collet holders renewed Chip conveyor Magazine IEMCA SIR MS 22 C / 33 P Ncjdpfx Aloyymadjnsu

Condition: good (used), Year of construction: 2021, Parts shown by hand not come. Ncsdpfxjzgpado Alnju Technical details are shown on picture.

Condition: excellent (used), Year of construction: 2015, DMG MORI NLX 2500 MC/700 lathe Year: 2015 M730M control system with CELOS-ERGOline Parts catcher Measuring probe Chip conveyor 5 driven tool holders 2 ER32 axial tool holders 2 ER32 radial tool holders Nedezgkdkjpfx Alnocu 1 end mill holder Very good condition, low operating hours.

Condition: used, Year of construction: 2006, centre distance 1000 mm turning diameter over bed 420 mm turning diameter over bed slide 235 turning length 1000 mm spindle taper DIN 55027 Gr. 6 control MANUALPlus 4110 spindle bore 51 mm turning speed range 3 - 3000 U/min feed: 5.000/10.000 mm / min drive capacity - spindle motor 11 kW taper in tailstock-quill MK 4 dia. of quill 70 mm quill stroke 110 mm coolant ja/yes voltage 400 V Number of working hours 6.908 h weight of the machine ca. 3 t dimensions of the machine ca. 3,4 x 2 x 2,2 m BOEHRINGER DUS 400 ti CNC cycle-controlled lathe, built in 2006 -Control system: Heidenhain ManualPlus 4110 -11 kW AC main drive with 2-stage gearbox Ncodjzgigdepfx Alnou -Work area cover with chip guard door -Control panel mounted on the support, moves with the machine -Holding brake -Programmable cycles -4-position quick-change turret -Size 2 tool holder on fixed base -With 1 WD ‘/25’ tool holder -Tailstock -Rapid traverse -Coolant system -Machine lamp Condition: Machine runs perfectly, no known faults, ready for immediate use. Accessories: 1 three-jaw chuck 250 mm, bore 62 mm 1 set of hard jaws 4 sets of soft jaws including jaw holders 23 tool holders including tools Translated with (free version)

Condition: used, Meuser Guide and Lead Screw Lathe Type/Model: Meuser M1L Condition: Used Ncedpfozgia Dox Alnou Year of Manufacture: 1980s Technical Data Center Height: 210 mm Distance Between Centers: 1000 mm Spindle Bore: 55 mm Bed Width: 340 mm Spindle Speed: 40 - 1800 (12) Motor Power: 7.5 hp Tailstock Arbor: MK 3 Tailstock Quill Travel: 120 mm Dimensions (L x W x H): approx. 1750 mm x 1200 x 1750 mm Equipment / Accessories: - 3-axis digital display, Heidenhain - 3-jaw chuck - Collet chuck, Forkardt - Quick-change tool holder, Multifix, number of positions 1 - Bed stop - Follower center - Chuck guard - Taper turning attachment - Machine feet

Condition: used, Year of construction: 1999, CNC turning lathe PC turn 125, manufactured in 1999. Ncsdjzghvkepfx Alnsu

Condition: used, Year of construction: 2022, machine/vehicle number: 71.0363, CNC turning machine with a 12-position turret Travel / Working area • X-axis: 370 mm • Z-axis (without Y-axis): 260 mm Feeds • Speeds: continuously adjustable • Rapid traverse X: max. 45 m/min (370 mm) • Feed forces X: 3450 N • Rapid traverse Z: max. 45 m/min • Feed forces Z: 4600 N Main spindle • Spindle speed: spindle-dependent, up to max. 8000 rpm • Drive power: 12 kW S1 • Bar diameter: 26 mm Clamping device • Chuck: 80 - 160 mm • Short taper DIN 55026: Form A, size 4 Ncjdpfx Alozggdyeneu Turret • Type: disc turret • Manufacturer: SAUTER • Number of tools: 12 • Tool holder: tool holder with cylindrical shank according to DIN 69880 VDI 25 • Drive power: 2 kW S1 up to 6000 rpm, up to 6 kW S3 40% duty cycle up to 6000 rpm • Max. tool length: from turret face to tool front edge 140 mm Technical data • Machine dimensions (width x depth x height): approx. 2309 x 1689 x 2014 mm • Weight approx.: 4500 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,043 h, spindle speed (max.): 2,500 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 1,560 mm, spindle motor power: 42,000 W, total height: 2,850 mm, total width: 2,400 mm, overall weight: 16,000 kg, bar diameter (max.): 102 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D shopturn, product length (max.): 7,200 mm, workpiece diameter (max.): 610 mm, number of slots in tool magazine: 12, number of axes: 3, This 3-axis EMCO MT 110X 1500 M/S was manufactured in 2007. It features an impressive X-axis travel of 410 mm and Z-axis travel of 1560 mm, with a maximum turning diameter of 610 mm. The machine is equipped with a powerful 42 kW spindle and offers live tooling capabilities. If you are looking to get high-quality turning capabilities, consider the EMCO MT 110X 1500 M/S horizontal turning machine we have for sale. Contact us for further details. • C-Axis Resolution: 0.001° • C-Axis Rapid Traverse Speed: 1000 rpm • Main Spindle Type: A2-11" • Maximum Turning Diameter: 610 mm • Swing Over Cross Slide: 550 mm • Swing Over Bed: 820 mm • Distance Between Centers: 1500 mm • Tailstock Stroke: 820 mm • Steady Rest Stroke: 1020 mm • Total Connected Load: 42 kW • Turret Interface: VDI 50 mm (DIN 69880) • Maximum Coolant Pressure Through Turret: 25 bar • Live Tool Stations: 12 • Live Tool Interface: DIN 5480 • Live Tool Speed Range: 0–4000 rpm • Live Tool Power (25% ED): 10 kW • Tailstock: Yes • C-Axis: Yes • Electrical Supply: 400 V • Frequency: 50 Hz • Phases: 3 • Rated Current: 100 A • Connected Load: 70 kVA • Production Hours: 17,043 h Additional Tooling: • Large quantity of high-quality tooling available (optional) • Chip Conveyor: Optional Technical Specification Through-spindle Coolant Yes Counter Spindle No Njdjzggiijpfx Alnocu Driven Tools Yes

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231574, Machine Specifications Control: MORI SEIKI MSX-850 Design: Slant-bed turning center Version: SY with Y-axis Turret: 12-position with driven tools Working Area Max. turning diameter: 356 mm Standard turning diameter: 275 mm Max. turning length: 705 mm Traverse Travels X-axis: 260 mm Y-axis: ±50 mm / total approx. 100 mm Z-axis: approx. 795 mm Ncodpezgghfsfx Alnou Rapid traverse X/Y/Z: 30 m/min Counter spindle LNS Quick Load Servo 2 bar feeder Max. bar length: approx. 1,500–1,600 mm / 63" The machine can be inspected under power by appointment. Specifications and technical details are subject to change and error. Prior sale reserved.

Condition: ready for operation (used), chuck outer diameter: 1,050 mm, turning diameter: 1,050 mm, rotational speed (max.): 117 rpm, Model: 36 EM Ncodpjzggfdefx Alnou Table Dia: 42” (Oversized) Max Swing: 42” Table Speeds: To 117 RPM

Condition: used, Year of construction: 2006, machine/vehicle number: IntNr231573, A used MORI SEIKI NL 2500/1250 CNC lathe, year of manufacture 2006, is available for sale. The machine is equipped with a MORI SEIKI MSX 850III / MAPPS III control system and an IRCO SIMAG bar feeder for automatic bar loading. Technical data Control: MORI SEIKI MSX 850III / MAPPS III Origin: Japan Design: Slant-bed CNC lathe Centre distance: 1,250 mm Maximum turning length: 1,298 mm Maximum turning diameter: 356 mm Standard turning diameter: 275 mm Swing diameter over bed: 923 mm X-axis travel: 260 mm Z-axis travel: 1,345 mm Njdpfxjzggg Us Alnecu Spindle speed: up to 4,000 rpm Spindle bore: approx. 80 mm Turret: 12 stations Number of turrets: 1 Chip conveyor Driven tools C-axis Y-axis Machine weight: 7,600 kg Machine dimensions (L x W x H): 5,000 x 2,300 x 2,400 mm The machine can be inspected under power by prior appointment. Technical data and specifications subject to change and error. Sale subject to prior sale.

Condition: used, Year of construction: 2004, operating hours: 153,199 h, machine/vehicle number: IntNr231566, For sale is a high-performance DMG Speed 12-7 Linear sliding headstock automatic lathe with FMB Minimag bar feeder. Control: Fanuc 16i-TB with DMG-specific operator interface Year of manufacture: 2004 Technical data Number of axes: 7 axes (X1, Y1, Z1, X2, Z2, C1, C2) Maximum bar diameter: 12.7 mm Maximum turning length: 120 mm Rapid traverse rates: X-axis (linear): 40 m/min Linear drive cooling: Separate cooling unit for thermal stabilization of the linear motor. Z-axis: 30 m/min Main spindle speed range: 0 – 12,000 rpm Drive power: 3.7 / 5.5 kW C-axis: 0.001° resolution for high-precision milling operations Counter spindle speed range: 0 – 12,000 rpm Travel (Z2): 150 mm C-axis: full-featured integrated C-axis Tool carrier (linear slide system) Total tool positions: up to 18 stations Driven tools: 3 to 5 positions for cross machining Max. speed of driven tools: 6,000 rpm Bar feeder: FMB Minimag for bar diameters from 2 to 23 mm. Bar length: 3,020 mm Chip conveyor Compact extinguishing system / Kraft und Bauer automatic fire suppression systems Parts separator Chip flushing system The machine can be demonstrated under power by prior appointment. Technical data and details are subject to change and error. Prior sale reserved! Ncedpfx Alszgggujnou