CNC lathe

Emco Drehmaschine PC turn 125

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW Lodpfx Aisvc Ax Neijrn weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: good (used), Year of construction: 2008, functionality: fully functional, Okuma Multus B300-W 6-axis turning and milling center Ledpfxjyg Rf Ns Aiiorn - Okuma OSP P200L - Year 2008 - Cutting time: 10,500 h - H1 milling spindle: 6,000 rpm - Main spindle: 3,800 rpm, Rota NC 315-86 - Counter spindle: 5,000 rpm - ATC 60 system HSKA-63 (60 tools) - Geometry: very good - Marpos tool sensor

Condition: used, MAZAK QT 20 Model: OT-20-N-K Lrjdpfx Aijwulzvoisn Turret: 8 positions Motor: 18.5 kW Year: 1988 Weight: 11,700 lbs Chuck: diameter 250 renewed operational panel

Condition: excellent (used), Year of construction: 2006, operating hours: 53,244 h, functionality: fully functional, Technical Data – Gleason Phoenix II 600HC (CNC Hypoid Gear Cutting Machine) Working Area Max. workpiece diameter: Ø 600 mm Max. tooth depth: 24.6 mm Max. gear width: 110 mm Number of teeth: 1–300 Cutterhead size face milling (FM): 18" diameter Cutterhead size hobbing (FH): 210 mm radius Max. cutter spindle speed: 600 min⁻¹ Work Spindle Front taper diameter: Ø 203 mm Taper bore diameter: Ø 181 mm Bore depth: 884 mm Max. work spindle speed: 600 min⁻¹ Lsdpfxexwzu Ie Aiiorn Dimensions and Weight Footprint L × W × H: 4.4 × 3.5 × 3.5 m (incl. peripherals) Machine weight: 26,000 kg Connection Data Total connected load: 139 kVA Main fuse: 200 A Operating voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø Lsdpfx Aijxtbf Esiern 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: not inspected (used), Year of construction: 1996, turning diameter over cross slide: 1,000 mm, turning length: 4,000 mm, turning diameter: 1,450 mm, spindle bore: 150 mm, rotational speed (max.): 560 rpm, overall weight: 20,000 kg, CNC NUM T Plus Capacity 4000 x 1450 mm on bed 1000 mm on cross-slide 4-jaw chuck 1200 mm Steady rest Automatic turret Set of tool holders Ledpeyzhrkefx Aiiorn Weight 20,000 kg

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 1 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-8 - Spindle power : 18,5 [kW] - Spindle speeds : 4.000 [rpm] - Max. bar diameter : 80 [mm] - Max. machining length : 728 [mm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260/795 [mm] - Y stroke : +/- 50 [mm] - Tool type : BMT - Live tools speed : 10000 [rpm] TAILSTOCK - Tailstock type : Numérique - Type of cone : CM5 - Tailstock stroke : 650 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 39 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.110 x 1.922 [mm] - Machine height : 2.120 [mm] - Machine weight : 6.100 [kg] MACHINE HOURS - Number of hours under power : 26654 [h] - Number of working hours : 15488 [h] EQUIPMENT - CNC : CELOS - Interactive programming : MAPPS 4 - Interface : USB, PCMCIA, RJ45, RS232 - Tool probe : Renishaw - Coolant tank * with high-pressure pump : 15 [bars] - Chips conveyor - Tool probe - Parts catcher - Parts conveying strip - Bar loader : LNS QUICK LOAD SERVO 80 S2 - Number of fixed tool holders : 9 - Number of turning tool holders : 3 - Electric transformer Lrodpfox Tvklsx Aiisn - Collet chuck

Year of construction: 2005, condition: ready for operation (used), Main Drive Spindle speed range 6000 Number of axis 6 Movement X-Axis Movement 260 mm Z-Axis Movement 590 mm This 6-axis MORI SEIKI NL2000SY/500 was manufactured in 2005, featuring X-axis travel of 260 mm, Z-axis travel of 590 mm, spindle power of 5.5 kW, and a spindle speed of 6,000 rpm. It includes a 12-position tool turret. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL2000SY/500 machine we have for tact us for more information. Application Types Lrodpfxjx D R Aue Aiijn Turning

Condition: used, Year of construction: 2001, No. of controlled axes: 8 Swing over bed (mm): 650 Swing over carriage (mm): 250 Distance between centers (mm/in): Max. 1450 / 57.08, Min. 310 / 12.20 Max. turning diameter × length (mm/in): Ø300 × 300 / Ø11.81 × 11.81 SPINDLE Spindle nose taper: JIS A2-11 Spindle diameter (mm): 120 Spindle hole (mm): 80 Ledpfx Aow N Nqvsiiern Spindle speed range (min⁻¹ / rpm): 38 – 3800 Number of spindle speed ranges: 2 Please see photos of specs. Includes all parts and tools in pallets.

Condition: excellent (used), Year of construction: 2007, operating hours: 7,690 h, functionality: fully functional, machine/vehicle number: NL301GJ1021, Technical data - MORI SEIKI NL3000Y/1250 Operating hours: 7,690 h Year of manufacture: 11/2007 Number of axes: 5 X-axis travel: 280 mm Y-axis travel: 120 mm Z-axis travel: 1,300 mm Spindle bore: 105 mm Number of tools: 12 Spindle power: 22 kW Spindle speed: 3,000 RPM Swing over bed: 995 mm Swing over cross slide: 825 mm Maximum turning diameter: 420 mm Bar capacity: 90 mm Maximum turning length: 1,260 mm Milling motor power: 5.5 / 3.7 kW, speed 6,000 RPM Rapid traverse rates (XZ): 30 m/min Tailstock body travel: 1,284 mm Tool setter, 3-jaw chuck, coolant system, interlocked safety guards, low-voltage lamp Dimensions (approx.): L x W x H: 5,200 x 3,400 x 2,270 mm Lrodpfjy Sxh Dsx Aiisn Weight approx. 8,100 kg