Used Toggle presses for sale (46)

Condition: used, Pneumatic toggle press, pneumatic press SCHMIDT Type 34-12 Manufacturer No. 400160-03 Serial No. 0028 Year of manufacture 2008 Pressing force 28 kN = 2.8 tons. Throat 130 mm Ram surface 63 x 36 mm Ram stroke 12 mm Clamping pin bore Ø 20 mm with clamping screw Compressed air requirement 2 to 6 bar - Stroke length continuously adjustable via a fixed stop for the upper stroke end position - Fine adjustment for the lower stroke end position with a scale of 1 graduation = 0.05 mm - Stroke triggered via pneumatic valve, triggered by material insertion - 45° press stand made of special aluminum construction - Press tool made of special construction for 3 x Ø 2.5 mm punch holes - Complete unit mounted on an aluminum base plate 600 x 600 x 20 mm Space required L x W x H 720 x 600 x 600 mm Weight 68 kg Nwolhcev Srfksdwzjd Very good condition

Condition: not inspected (used), Year of construction: 1998, National Press Nwslov S H E Eehcdwzed Refurbished 1998 Pressure: 700 tons

Condition: used, Year of construction: 1997, pressure 1000 t distance between columns 1260 mm stroke 315 mm no. of strokes 10, 21 - 42 /min distance table/ram, max. stroke up, adjustment up 1295 mm table surface area 1250 x 800 mm table height over floor 670 mm side window 830 mm Nwjlhcdjvuukujwzed capacity of ejector in table 63 t ejector stroke of ejector in table 75 mm capacity of ejector in ram 16 t stroke of ejector in ram 23 mm ram surface 1250 x 800 mm ram adjustment 20 mm feeding length transfer 0 - 250 mm closing travel of each rail programmable 0 - 140 mm no. of strokes of the transfer 42 /min power requirement 135,0 kW weight 120,0 t Dimensions (WxDxH) 5,9 x 4,8 x 7,95 m height above floor 6,95 m height beneath floor 1,0 m with DC drive, pneumatic clutch, motoric ram adjustment, pneumatic counterbalance in ram, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram interlocking, die clamping system in table and ram, motoric oil circular lubrication, grease lubrication control of the press: Siemens S 5 - CNC 2-Achs-Transfer (Fabrikat Dreher, Type STV-D Modell 350/100-SO, Bj. 2008), Steuerung Siemens S 7 - cleaning system (make Beyss, yom. 1989) as is where is, WITHOUT putting into operation, stored in dismantled condition The press was previously installed in a soundproof enclosure, which is not part of the scope of delivery Video at seller's site before dismantling available

Condition: good (used), Functionality: fully functional, The following item is for sale: - Our offer number: 15/129 - Toggle press Hand lever press - Manufacturer:Gechter - Type: 2,5 HKPV - Serial number: 702228 - Year of manufacture :2014 - Dimensions: without handle HxWxD 360x150x210 mm - Weight : 12 kg - Table size 80x150 mm - Projection: 90 mm - Compressive force: 8 kN - Max. pressure force: 280 N - Max. installation height: 190 mm - Installation height min.: 75 mm - Installation height min./max.: 75-190 mm - Total height: 480/600 mm - Stroke length max.: 42 mm - optical condition according to photos - used - functional Nwoljrfck Nehcdwzod - Shipping Germany-wide 20,90€ Notes: The goods offered here usually come from company liquidations and insolvencies. Due to missing type plates, it is not always possible to provide exact item data. The item pictures are original photos that show the actual condition of the item. If several identical items are offered, only one of the items will be photographed. There may be slight variations in the condition of the individual items. If an item is opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Company names and trademarks used are the property of their owners. They serve exclusively to identify and describe the goods.

Condition: used, pressing force: 1,500 t, pressure: 6 bar, operating pressure: 6 bar, space requirement height: 80 mm, space requirement length: 60 mm, space requirement width: 45 mm, stroke distance: 60 mm, Alfamatic B-15 tromboline type mini press Nolhcdwov Hp Huozowd Ideal for assembly of prototypes and series, very easy to program It has a CSQ Visual control system for processing force and travel data with various functions and the possibility of connecting to a computer

Year of construction: 2000, Condition: good (used), 5.pcs in stock Price Applies to 1.pcs. Nslhoiduvgocdwzjwd Toggle press Fabr.SCHMIDT Druckl.3 KN.

Condition: ready for operation (used), Year of construction: 1984, Press force: 3600kN, press force stroke: 1.7mm, press work capacity: 6120J. Stroke: 60mm, installation height: 340mm. Table clamping width/depth: 440mm/525mm, tool holder width/depth: 440mm/320mm. Dimensions X/Y/Z: 1300mm/2000mm/2230mm, weight: approx. 6300kg. Noljr A Eifehcdwzewd

Condition: ready for operation (used), Schmidt 32-151-01 Toggle press PressControl 60 Compressive force: 15 kN Stroke: 40mm Follow-up time: 0.07 sec Overtravel: 15mm PressControl 60 Two-hand operation You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. Nolhceulf A Esdwzjwd A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, Year of construction: 2012, pressure 260 t distance between columns 360/270 mm stroke 60 mm Stroke rate 50 / min Distance table/ram, max. stroke up, adjustment up 225 mm Table surface area 340 x 380 mm table height over floor 800 mm Ram surface 230 x 220 mm Ram adjustment 12 mm Power capacity 4,5 kW Dimensions (WxDxH) 2,0 x 1,55 x 2,6 m Weight 4,5 t Overhauled in 2012 Nwelhcdwjvuuk Ijzsd permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) overhaul in 2012: new clutch-brake combination new control Siemens S 7 new two-hand and foot operation

Condition: good (used), Functionality: fully functional, The following item is for sale: - Our offer number: 40/129 - Toggle press hand lever press industrial version - Dimensions: without handle HxWxD 380x160x220 mm - Weight : 17,5Kg - table size 160x100 mm - optical condition according to photos - used - functional Shipping Germany-wide 27,80€ Notes: The goods offered here usually come from company liquidations and bankruptcies. Due to missing type plates, it is not always possible to provide exact item data. The item pictures are original photos that show the actual condition of the item. If several identical items are offered, only one of the items will be photographed. There may be slight variations in the condition of the individual items. If an item is opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Nwolherivbrocdwzod Company names and trademarks used are the property of their owners. They serve exclusively to identify and describe the goods.

Condition: used, pression: 1,2 kg table size: 110 x 150 mm clearance hole in the die: 20 mm throat: 86 mm Nwslhcjdbmpmedwzsd max. distance between table and tappet: 80/210 mm tappet stroke: 30 mm space needed: 240 x 150 x 510 mm weight: 21 kg

Condition: excellent (used), Year of construction: 1988, Force: 125 tons Windows: yes Nslhcjdvb Tfodwzewd Daylight: 380mm Table: 1100x700mm Ram: 700x350mm Stroke: 01-120mm Strokes per Minute: Approx. 70 Requested power: 22kW Weight: 8500kg Height: 2900mm

Condition: new, Year of construction: 2024, Kyori High-Speed-Press VX50-1100 with new Press-Control-System Technical specification: tonnage: 500 KN drive: flywheel with dynamic balancer feeding direction: right to left color: Kyori white RAL 7035 position of main drive: right ram adjustement range: 55 mm max. shut height: 290 mm max. upper die weight: 300 kg (higher upper die weight is possible with reduced performance) safety doors: front and back tool load area light: 2 LED-lights bolster area (LxW): 1100 (1140 ) x 600 mm bolster design: T-slot bolster material: steel bolster thickness: 220 mm base plate opening (LxW): 00 x 160 mm ram area (LxW): 1100 x 420 mm ram design: T-slot dimensions: 2300 x 1600 mm Nolhcdjtndfrewzswd total height: 3750 mm weight: (approx.) 14,000 kg strip inlet height: has to be defined strip inlet width: max. 280 mm cooling system: liquid cooling system, for electrical cabinet;AC servo main drive and machine oil Press control with the following features: - 15" touch screen with stand. - User-friendly visualized menu navigation - Data import/export - Energy Safe / night shutdown - Three-level energy options - User administration - Error log - High resolution coding system - Tool changeover incl. stored process parameters - TDC shutdown with brake angle calculation over entire speed range - Oil and air pressure display incl. monitoring - Integration of the press into a process chain via peripheral interfaces - Ethernet interface - USB interface - Backup function - Test stroke - Reverse run - Increased working capacity, i.e. reduction of speed to 80 stroke/min. - Quick lift incl. automatic approach to quick lift position and die shut height in set-up and continuous mode - Stroke change menu-driven - Detection of the working stroke after stroke change with SET/ACTUAL comparison - UPS - for fail-safe operation - Absolute ram position display - Punching area protection with non-contact safety switches - Beckhoff "Twincat 3.1" control system - Beckhoff "TwinSafe" safety controller - water-cooled, for cooling the control cabinet and AC servo main drive * for stable production with fluctuating environmental influences such as heat * minimal heat dissipation inside the sound enclosure due to main drive * no suction and swirling of punching oils and particles through main drive - all electrical cables, connectors, control elements, are professionally installed - Remote support Teamviewer - Internet access through integrated Ethernet interface - Interlinked EMERGENCY STOP function - Extension of the press control for further SYS products on request - Integrated service counters for programmable maintenance intervals and maintenance instructions - 8 customer-specific error messages - 2 peripheral interfaces including power supply *Harting Interface 16A *Harting interface 32 A - SCHUKO socket outlet 230V 10A

Condition: used, Year of construction: 1970, pressure 180 t dimensions of the machine ca. 2 x 1,5 x 2 m strokes per minute 60 total power requirement 3 kW Nwjlhcdwovr Hknozjd weight of the machine ca. 4 t

Condition: used, Year of construction: 1995, pressure 800 t distance between columns 1050 mm stroke 200 mm no. of strokes 8 - 25 /min distance table/ram, max. stroke up, adjustment up 1300 mm Side window 550 mm table surface area 1030 x 900 mm Capacity of ejector in table 15 t Stroke of ejector in table 85 mm ram surface 1040 x 800 mm ram adjustment 120 mm Capacity of ejector in ram 12 t ejector stroke in ram 80 mm power requirement 36,0 - 112,6 kW weight 65,0 t Dimensions (WxDxH) 3,0 x 3,1 x 6,07 m Sinter-metal calibrating press Nolhcovuukzodwzjwd with DC motor, flywheel with planetary gear, toggle / knuckle-joint system, hydraulic clutch/brake combination, electronic overload protection, motorised tool holder adjustment, pneumatic counterbalance cylinder in press frame, hydraulic ejector in table, hydraulic ejector in tool holder can only be offered without putting into operation in our warehouse - video at seller's site before dismantling available

Condition: good (used), Functionality: fully functional, The following item is for sale: - Our offer number: 39/129 - Toggle press Hand lever press Crimping press - Dimensions: without handle HxWxD 465x160x270 mm - Weight : 26,5Kg - table size 160x100 mm - optical condition according to photos - used - functional - Shipping Germany-wide 27,90€ Nwolhcderivbcewzod Notes: The goods offered here usually come from company liquidations and bankruptcies. Due to missing type plates, it is not always possible to provide exact item data. The item pictures are original photos that show the actual condition of the item. If several identical items are offered, only one of the items will be photographed. There may be slight variations in the condition of the individual items. If an item is opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Company names and trademarks used are the property of their owners. They serve exclusively to identify and describe the goods.

Year of construction: 1993, Condition: used, machine/vehicle number: P 285, pression: 800 kN Njlj N D Anehcdwzowd table size: 600 x 900 mm space needed: 1150 x 1900 x 2700 mm weight: 6000 kg

Condition: excellent (used), Year of construction: 2005, Orbital riveting machine Pressure force: 4.2 KN Stroke: 50 mm Safety distance: 312 mm Njlsvrq Iwehcdwzjwd PLC control

Condition: used, Year of construction: 2005, From the customer's factory - already dismantled and available immediately HYDRAULIC POST-BENDING PRESS HYDRAULIC POST-BENDING PRESS Nolhcdwjvkw Nlszjwd MADE / MADE G R A E B E N E R MODEL / TYPE GRNM YEAR OF CONSTRUCTION / NEW 2005 CONDITION / CONDITION Dismantled / dismantled DELIVERY TIME / DELIVERY TIME IMMEDIATELY / IMMEDIATELY Pipe diameter max. Pipe diameter max. 1524 mm Plate thickness Plate thickness 40 mm Pipe length max. Pipe length max. 13200 mm Pipe length min. Pipe length min. 6000 mm Pipe weight max. 25000 kg Max. bending force Max. bending force 16000 kN Tool length 1600 mm Bending length depends on plate thickness and tool 800-1500 mm Number of adjusting cylinders 2 St/pc Adjustment stroke 180 mm Adjustment speed of the lower swing arms 40 mm/sec Number of adjustable spreader rollers 2 St/pc Spreader-rollers adjustment Hydraulic Machine weight 65000 kg Main pumps 132 kw Helping pumps 37 Kw Coolant and filter pumps 11 kw Accessories tools and documentation Delivery time immediately – subject to prior sale and availability Delivery time Immediately prior to sale served

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t Nwslhcdwjvuuknezjd ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: excellent (used), Functionality: fully functional, The following item is for sale: - Our offer number: 26/129 Njlerg Ewmehcdwzowd - Toggle press Hand lever press - Manufacturer:Gechter - Type: 2,5KN - Serial number: 75591 - Dimensions: without handle HxWxD 420x200x260 mm H with handle 480 mm - Weight: 13,2 kg - Table size 100x150 mm - optical condition according to photos - used - functional - Shipping Germany-wide 20,90€ Notes: The goods offered here usually come from company liquidations and bankruptcies. Due to missing type plates, it is not always possible to provide exact item data. The item pictures are original photos that show the actual condition of the item. If several identical items are offered, only one of the items will be photographed. There may be slight variations in the condition of the individual items. If an item is opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Company names and trademarks used are the property of their owners. They serve exclusively to identify and describe the goods.

Condition: used, Year of construction: 1977, pressure 30 t throat 110 mm stroke 50 mm no. of strokes 35 - 80 /min passage to the back 170 mm dayligth 230 mm table surface area 410 x 260 mm table height over floor 790 mm ram surface 190 mm ram adjustment 35 mm power requirement 1,0 x 1,1 x 1,8 kW Weight 1,3 t permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) Nolevuugpjhcdwzewd as is where is, WITHOUT putting into operation - video at seller's site before dismantling available

Condition: used, Year of construction: 1988, pressure 100 t distance between columns 1180 mm stroke 3 - 120 mm no. of strokes - 95 /min distance table/ram, stroke up 500 mm table surface area 1100 x 700 mm Hole in the table 220 x 100 mm table height over floor 800 mm side window 400 mm ram surface 750 x350 mm ram adjustment 100 mm Oil volume 1300 l Nwelhjvut Tzecdwzsd power requirement 42,0 kW weight 10,0 t dimensions (WxDxH) 1,8 x 1,8 x 3,55 m permitted for manual put-in according to the German Safety Regulations (UVV) with hydraulic driven knuckle-joint system, controllable dependent on pressure and way, two-hand operation with electro-hydraulic roll feed no foundation pit necessary Option additionally: decoiler Fecker (price on request) can be offered with or without putting into operation - video at seller's site before dismantling available

Condition: used, Year of construction: 2003, pressure 400 t distance between columns 1060 mm stroke 450 mm no. of strokes 15 - 30 /min distance table/ram, max. stroke up, adjustment up 1160 mm table surface area 1000 x 700 mm capacity of ejector in table 2 x 16 t ejector stroke of ejector in table 125 mm Die cushion pressure in table 120 t Die cushion stroke in table 2 mm capacity of ejector in ram 2 x 4 t stroke of ejector in ram 100 mm ram surface 1000 x 700 mm column travel -side 630 mm power capacity 55,0 kW Nwolhsvzxpujcdwzod weight 50,0 t year of manufacture 1986 - overhaul 2003 multi-station press with automatic parts feed, Transfer, drawing cushion in table (2. stage) as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: used, Year of construction: 1988, pressure 100 t distance between columns 1180 mm stroke 1 - 120 mm no. of strokes 90 /min distance table/ram, stroke up 470 mm table surface area 1100 x 700 mm table height over floor 800 mm side window 400 mm ram surface 740 x 350 mm ram adjustment 100 mm power requirement 37,0 kW weight 11,0 t dimensions (WxDxH) 2,3 x 2,0 x 3,5 m difference-way press Nwelsvzxtaehcdwzjd with hydraulic driven knuckle-joint system, controllable dependent on pressure and way, two-hand operation No foundation pit necessary as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request T-slots in table and ram according to customer's specification - price on request