Condition: used, Year of manufacture: 1980s/90s Technical data: Centre height: 185 mm Centre distance: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock taper: MT 3 Quill stroke: 110 mm Dimensions (W x D x H), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: Itjdpfxsydk Hhs Ahvsd - 3-jaw chuck, make: Röhm, ø 200 mm - Quick-change tool post with 4 holders - Bed stop - Chip tray

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 4,000 rpm, bar diameter (max.): 65 mm, number of axes: 9, This 9-axis Muratec MT200 multi-spindle turning machine was manufactured in 2019. It features a maximum bar capacity of 65 mm and a chuck size of 210 mm. The machine includes an impressive maximum feed speed of 24 m/min on the X-axis and 36 m/min on the Z-axis. If you are looking to get high-quality turning capabilities, consider the Muratec MT200 machine we have for sale. Contact us for further details. Ijdpfxoyvuxyo Ahvetd • Chuck size: 210 mm (8 inch) • Maximum swing: 205 mm (15 stations) / 228 mm (12 stations) • Maximum bar capacity: 65 mm (standard) / 80 mm (option) • Turret stations: 15 (upper and right) / 12 (lower) • Bar diameter: 65 mm (Standard) / 80 mm (Option) • Axis stroke (2-turret): • Upper turret: X 220 mm, Z 770 mm, Y +/- 40 mm • Lower turret: X 200 mm, Z 770 mm, Y +/- 40 mm • Right spindle (Zs): 880 mm • Maximum feed speed: • X axis: 24 m/min • Z axis: 36 m/min • Y axis: 12 m/min • Live tooling motor: 14.0 kW max (4.8 kW continuous) • Live tooling max speed: 4500 rpm • Spindle positioning: C axis control (+/- 0.015 degrees) Additional equipment • Gantry loader capacity: 140 mm x 105 mm (3 jaw), up to 8.0 kg x 2 (option) • Parts catcher capacity: 65 mm x 160 mm, 2.5 kg Technical Specification Counter Spindle Yes

Condition: good (used), Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 140 mm, spindle bore: 45 mm, center width: 500 mm, Cycle lathe Manufacturer: Kern Model: CD 282 Year of manufacture: 2006 Technical Data Make: Kern Model: CD 282 Year: 2006 Control: Heidenhain Centre distance: 500 mm Swing over bed: 280 mm Swing over cross slide: 140 mm Spindle bore: 45 mm Speed range: 1–5000 rpm Drive power: 11.5 kW Dimensions: L 2.20 x W 1.60 x H 1.20 m Weight: approx. 1.6 t Accessories - Heidenhain control digital display - Clean Mist extraction unit, model CM 1400/2, year 2018 - Large range of accessories as per photos - 1 piece steady rest - 1 faceplate, ø500 mm - 4 Multifix holders, size C All information is supplied without liability. A live demonstration under power is possible at any time in our exhibition hall. Itsdpfx Ahjyvugdoved

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 365 mm, spindle bore: 62 mm, turning length: 2,000 mm, turning diameter: 57 mm, swing diameter over cross slide: 365 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, spindle speed (min.): 3 rpm, spindle speed (max.): 2,500 rpm, bed width: 360 mm, total length: 5,000 mm, total width: 2,100 mm, total height: 2,000 mm, workpiece weight (max.): 1,600 kg, travel distance cross slide: 345 mm, overall weight: 5,000 kg, rotational speed (min.): 3 rpm, rotational speed (max.): 2,500 rpm, The VDF Boehringer DUS 560 Ti is, in terms of turning diameter, the most popular teach-in lathe from VDF Boehringer. With a standard chuck size of 315mm or larger, these machines offer optimal machining efficiency for single-piece and small batch production. This machine is currently set up in our showroom and can be viewed on site! Comes as standard with: - Original documentation - Set of tool holders + drill chuck - Fixed steady rest - 3-jaw Forkardt 315-F Ø315mm chuck Itjdpfxoyvuhzs Ahvod Weight & dimensions: - 5,500 kg - 5,000 x 2,100 x 2,000 mm (LxWxH) For all specifications of this machine, please see the last images!

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, turning diameter: 1,600 mm, turning length: 3,500 mm, center height: 800 mm, spindle bore: 100 mm, faceplate diameter: 1,250 mm, Equipment: documentation/manual, For sale: 1 used facing and center lathe Itodpfx Ahsyvt H Ajvod Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Model: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Maximum turning diameter over bed: 1,600 mm Distance between centers: 3,500 mm Spindle bore: 100 mm Face plate diameter: 1,250 mm Total machine weight: approx. 24.8 t Includes documentation. Additional pictures and videos can be provided upon request. The following work has been performed on the machine over the past four years: - Tailstock completely overhauled at the end of 2022. New bearings, new center, and lubrication. - Cross slide refurbished in 2024. - Gibs reconditioned with new slideways; scuff marks on guideways smoothed by scraping. - Spindle bearing seats eased, gibs scraped on contact and slideway surfaces. - Lubrication pump cleaned and repaired, lubrication system made fully functional, some metering valves replaced, and new guideway wipers fabricated. The machine can be inspected at our warehouse in 09599 Freiberg by arrangement.

Condition: used, Year of construction: 2005, MAZAK QT6 year 2005 Kitagawa B205 chuck 8-position turret spindle bore 32 mm max diameter 130 mm max turning length 195 mm Itsdpfxeyvr Hzo Ahved included with the machine: documentation chip conveyor sump with pump

Condition: used, total length: 10,560 mm, total width: 1,710 mm, total height: 1,400 mm, Empty weight: 9.000 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 22.0 - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Carriage turning diameter [mm]: 360 - Distance between centres [mm]: 8000 - Bed width [mm]: 700 - Spindle bore [mm]: 62 - Min. spindle speed [rpm]: 8 - Max. spindle speed [rpm]: 1180 - Options: Digital readout - Type of digital readout: Sony - Transport dimensions: 10560mm x 1710mm x 1400mm (l x w x h) - Transport weight [kg]: 9000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Itjdpfeyg Hi Rex Ahvod Lukas van Rossum

Year of construction: 2006, condition: used, total length: 4,300 mm, total width: 2,100 mm, total height: 2,100 mm, Empty weight: 5.000 kg Price: On request - Year: 2006 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Control system brand: Siemens - Power [kW]: 30.0 - Swing over bed [mm]: 350 - Distance between centres [mm]: 600 - Bed width [mm]: 210 - Spindle bore [mm]: 62 - Max. spindle speed [rpm]: 3500 - Options: Chip conveyor, Three-jaw chuck, Bar feeder, Live tools, C-axis - X-axis travel [mm]: 271 - Y-axis travel [mm]: 600 - Transport dimensions: 4300mm x 2100mm x 2100mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Itodpoyf H Ahjfx Ahvod

Condition: used, total height: 2,500 mm, total length: 5,000 mm, total width: 2,200 mm, Empty weight: 5.500 kg Price: On request - Documentation available: Yes - └ Type Documentation: Maintenance history, Electrical diagrams, Technical data, User manual - └ Language: DE, EN - └ Type: Hardcopy - CE marking present: Yes - CE certificate present: No - Serial number: 12598 - Drive system: Teach-in - Control system brand: Fagor - Control system type: 8055 - Power [kW]: 15.0 - Centre height [mm]: 350 - Swing over bed [mm]: 700 - Carriage turning diameter [mm]: 425 - Distance between centres [mm]: 2000 - Bed width [mm]: 450 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 310 - Max. spindle speed [rpm]: 2000 - Max. workpiece weight [kg]: 4000 - Options: Digital readout, Removable bed - Type of digital readout: Heidenhain Manualplus - Control: CNC - Transport dimensions: 5000mm x 2200mm x 2500mm (l x w x h) - Transport weight [kg]: 5500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Itsdpfx Ahownhm Isvsd Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1997, total length: 1,500 mm, total width: 800 mm, total height: 1,500 mm, Empty weight: 700 kg - Year: 1997 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 1101050 - Drive system: Conventional - Power [kW]: 4.2 - Centre height [mm]: 125 - Swing over bed [mm]: 250 - Carriage turning diameter [mm]: 160 - Distance between centres [mm]: 500 - Bed width [mm]: 160 - Spindle bore [mm]: 38 - Min. spindle speed [rpm]: 60 - Max. spindle speed [rpm]: 3000 - Transport dimensions: 1500mm x 800mm x 1500mm (l x w x h) - Transport weight [kg]: 700kg - Transport packages [pcs.]: 1 Financial information Ijdex Dyquspfx Ahvjtd VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1980, total length: 1,960 mm, total width: 1,050 mm, total height: 1,570 mm, Empty weight: 1.500 kg - Year: 1980 - Documentation available: No - CE certificate present: No - Serial number: 1123 - Drive system: Conventional Itedpfjyvtkhsx Ahvod - Power [kW]: 5.5 - Centre height [mm]: 180 - Swing over bed [mm]: 360 - Distance between centres [mm]: 800 - Bed width [mm]: 330 - Spindle bore [mm]: 52 - Min. spindle speed [rpm]: 44 - Max. spindle speed [rpm]: 2000 - Options: Quick-change tool post, Four-jaw chuck - Transport dimensions: 1960mm x 1050mm x 1570mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2007, In good technical condition. Year of manufacture: 2007. Max. turning length: 406 mm. Max. turning diameter: 173 mm. Spindle diameter: 44 mm. Number of tools on turret: 12. Adjustable spindle speed: 6000 rpm. Iodpjyvr D Hefx Ahvstd

Condition: new, Precision center lathe and feed spindle lathe Make: OPTiturn Model: TM 4010 D Item no.: 3403045 Condition: New machine Center height: 200 mm Center width: 1.000 mm Spindle speed: 70 - 2,000 rpm (8 steps) Equipped as standard with - 3-axis digital readout DPA 31 PLUS - Machine base - 200 mm three-jaw chuck - LED machine light - Reducing sleeve MK 4/MK 6 - Fixed center point MK 4 - Steady rest, fixed - Steady rest, moving - Quick-change steel holder Basic body E Iodpeilup Nefx Ahvetd - Torsion steel holder ED - Chuck protection cover, electrically fused - Oil filling - Operating tool - Operating instructions

Condition: used, Year of construction: 1980, VDF Wohlenberg Type:V1400 Parts . Top support : Overall height : 600 mm Overall length : 650 mm Base plate : 350 mm X 350 mm Itedpfx Aotttigshvod Base plate holes diameter : 22 mm Spacing: width 240 mm lengthwise : 290 mm Tool holder mounting : 100 mm X 45 mm Thread tool holder M30 . Tailstock: Center height : 630 mm Quill diameter : 100 mm Base plate : 500 mm X 400 mm . Faceplate : Diameter 1000 mm Width : 125 mm with 3 jaws Spindle holder 250 mm 4 bores diameter 20 mm pitch circle 200 mm . Sale individually or in a package possible .

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Itjdpfxjw Uf Hws Ahvod Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: used, L + Z Lathe WEILER Model Praktikant 800R Machine No. 3309 Year of manufacture: 1984 Centers distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and cross Chuck mounting: Short taper DIN 55027 size 5, 4x M10 Tailstock taper: MT 3 Tailstock quill travel: 90 mm Spindle speed: 42 – 2000 rpm Drive power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear steps - 3-jaw scroll chuck BILSING Ø 160 mm with 1 set of stepped jaws and 1 set of soft jaws - MULTIFIX quick-change toolpost size A with 3 exchangeable toolholders - Live center - Emergency stop - Folding chuck guard - Coolant system - Operating manual with electrical schematic - Very low operating hours Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 600 kg Very good condition Itedpfxeyg Rfis Ahvjd

Condition: used, L + Z Lathe TONGIL- SAEILO Type TIPL-4SP Machine No. 00570319 Year of manufacture: 1985 Centre distance: 1000 mm Swing over bed: 400 mm Swing over cross slide: 210 mm Centre height over bed: 200 mm Centre height over cross slide: 105 mm Spindle bore: 58 mm Spindle speed: 55 - 1600 rpm, 16 steps Feed: Longitudinal and cross Tailstock taper: MT4 Chuck flange: Camlock, taper size 6 Motor power: 4 / 6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear stages - 3-jaw scroll chuck RÖHM Ø 200 mm with stepped jaws - Multifix quick-change tool post size B with 2 exchangeable tool holders - Spindle brake via mechanical foot pedal - Coolant system - Emergency stop - Machine lamp Space required (L x W x H): 2250 x 1050 x 1220 mm Itodpfex Urbvox Ahvjd Weight: 1500 kg

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 755 mm, turning diameter: 923 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, total height: 2,200 mm, total length: 4,000 mm, total width: 1,800 mm, overall weight: 5,000 kg, bar passage: 65 mm, controller manufacturer: MORI SEIKI, controller model: MSX-850, number of slots in tool magazine: 12, Equipment: chip conveyor, MORI SEIKI NL 2000 Y / 500 CNC lathe - Max. machining diameter: 356 mm Iedpfsyvrvvsx Ahvetd - Y-axis travel: +/-50 mm - Max. milling speed: 6,000 rpm - Equipped with chip conveyor and HAINBUCH clamping system, diameter: 200 mm Note: The item must be firmly collected between 12.05. and 22.05.2026, on a date to be mutually agreed. FCA D-74821 Mosbach – loaded onto truck

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: PM301222, turning length: 648 mm, turning diameter: 400 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 282 mm, travel distance Z-axis: 1,330 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,000 mm, total length: 5,000 mm, total width: 2,200 mm, quill travel distance: 100 mm, quill diameter: 100 mm, overall weight: 5,000 kg, spindle nose: A2-8, bar diameter (max.): 77 mm, controller manufacturer: FANUC, controller model: SERIES 18i-T, Equipment: chip conveyor, documentation/manual, DAEWOO PUMA 300 B CNC Lathe - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 10.499 A - Connection: 40.01 kVA Itjdeyvru Sopfx Ahvod - Swing diameter over bed: 570 mm - Swing diameter over carriage: 370 mm - Recommended machining diameter: 255 mm - Max. machining diameter: 400 mm - Max. working length: 648 mm - Bar capacity: 77 mm - Chuck diameter: 255 mm - Front spindle bearing diameter: 130 mm The machine is equipped with a tailstock, a 10-station turret, as well as a three-jaw chuck from SMW AUTOBLOK, diameter: 260 mm, and a chip conveyor. Attention: The item must be collected on a binding date, to be arranged, between 12.05. and 22.05.2026. FCA D-74821 Mosbach – loaded onto truck.

Condition: good (used), functionality: fully functional, machine/vehicle number: M232302, turning length: 435 mm, turning diameter: 250 mm, spindle bore: 63 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 480 mm, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,200 mm, total length: 8,000 mm, total width: 2,400 mm, overall weight: 5,000 kg, bar passage: 52 mm, spindle nose: A2-5, controller manufacturer: FANUC, controller model: SERIES 18i-T, Equipment: chip conveyor, rotational speed infinitely variable, NAKAMURA TOME WT-250 CNC Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 225 A - Connection: 62 kVA - Swing diameter over bed: 250 mm - Swing diameter over carriage: 250 mm - Standard turning diameter: 100 mm - Max. bar capacity: 51 mm - Chuck size: 6 inch - Front spindle bearing diameter: 90 mm - Tailstock travel: 620 mm - Tailstock rapid traverse: 24 m/min - Ball screw diameter: 32 mm - Ball screw pitch: diameter 12 mm - Distance between spindle noses: min. 250 mm, max. 870 mm Itedeyvrthjpfx Ahvjd - Positioning accuracy of feed axes: 0.05 mm The machine is equipped with a sub-spindle, HAINBUCH clamping system, a main spindle with HAINBUCH clamping system, a twin turret with the tool holders as shown on the turret, as well as a bar feeder from KUPA, model LM92P, along with chip conveyor and transformer. Attention: The item must be collected between 12.05. and 22.05.2026, with the exact date to be agreed upon. FCA D-74821 Mosbach – loaded onto truck

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 135908, turning diameter: 710 mm, spindle speed (min.): 38 rpm, spindle speed (max.): 3,800 rpm, travel distance X-axis: 690 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,545 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, total height: 3,200 mm, total length: 6,000 mm, total width: 2,500 mm, overall weight: 14,000 kg, spindle diameter: 120 mm, tool length: 400 mm, controller manufacturer: OKUMA, controller model: OPS-P 200 L, tool weight: 1,000 g, number of slots in tool magazine: 20, Equipment: chip conveyor, OKUMA MULTUS B 300 CNC Turning and Milling Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 96 A Ijdpfx Aoyvrq Hehvstd - Connection load: 47.8 kVA - Swing diameter over bed: 710 mm - Distance between centers: 1500 mm - B-axis travel: 1550 mm, rapid traverse: 12 m/min - C-axis travel, control angle: 360°, rapid traverse: 200° - B-axis indexing angle: 0.001° - Number of tools: 1 L or M tool 25 mm, diameter: 40 mm - Rotational speed of live tools: 6000 rpm - Tool holder: HSK 63 - Including chip conveyor, coolant system, as well as tool holders as equipped on the tool changer Note: The item must be collected between 12.05. and 22.05.2026 on a binding, mutually agreed date. FCA D-74821 Mosbach – loaded onto truck

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 151576, travel distance X-axis: 690 mm, travel distance Z-axis: 1,545 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, total height: 3,500 mm, total length: 9,500 mm, total width: 2,500 mm, overall weight: 14,500 kg, tool length: 400 mm, controller manufacturer: OKUMA, controller model: OSP-P 200 L, tool diameter: 90 mm, tool weight: 1,000 g, number of slots in tool magazine: 40, OKUMA MULTUS B 400 CNC Turning and Milling Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 190 A - Connection load: 58.9 kVA - Turning diameter: up to max. 710 mm - Swing diameter over cross slide/bed: 710 mm - Y-axis travel: +115 / -115 mm - C-axis travel: 360° Ijdpfxeyvrn Ej Ahvjtd - B-axis travel: 225° - Main spindle chuck diameter: 340 mm - Spindle nose diameter (front bearing): 150 mm - Spindle bearing diameter: 101.6 mm - Feed rate in X/Y/Z: 0 - 1000 mm/rev - Rapid traverse X/Y/Z/W: 40/26/40/20 m/min - Rapid traverse C-axis: 200 rpm, B-axis: 30 rpm - NC tailstock (W-axis) - Taper: MK 4 - Tool holder: HSK 63 - Including chip conveyor and coolant system Note: The HSK tool holders in the tool magazine are included in the scope of delivery! Note: In 2023, the machine underwent several overhauls with a total value of EUR 34,000. Documentation available; detailed breakdown upon request! Note: Item must be picked up bindingly between 12.05. and 22.05.2026 on a date yet to be agreed. FCA D-74821 Mosbach – loaded onto truck

Condition: excellent (used), Year of construction: 2019, Doosan Puma 4100B 2-Axis CNC Lathe Year of manufacture: 2019 Control system: FANUC i Series Specification: Maximum turning diameter: 550 mm Maximum turning length: 1042 mm Itodpfx Asyvqnkjhved Hydraulic chuck: 15 inches Bar capacity: 116.5 mm Maximum spindle speed: 2000 rpm Spindle nose: ASA A2#11 10 tool stations External tool dimensions: 32 x 32 mm X-axis travel: 352 mm Z-axis travel: 1105 mm Rapid traverse X-axis: 16 m/min Rapid traverse Z-axis: 20 m/min Tailstock sleeve taper: MT#6 Spindle motor power: 35 kW Tool probe With the machine: - Documentation Tool holders: - 3 pieces for drilling - 4 pieces for turning tools

Condition: good (used), functionality: fully functional, machine/vehicle number: 324, turning length: 525 mm, turning diameter: 160 mm, spindle bore: 52 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 222 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 15 m/min, total height: 2,000 mm, total length: 4,000 mm, total width: 2,000 mm, quill travel distance: 80 mm, quill diameter: 75 mm, overall weight: 5,000 kg, swing diameter over bed slide: 450 mm, swing diameter over top slide: 300 mm, controller manufacturer: MORI SEIKI, controller model: MORIC-T5F, Equipment: chip conveyor, documentation/manual, MORI SEIKI SL-15 M CNC Lathe - Operating voltage: 380 V - Frequency: 50 Hz - Connection: 20 kVA Itsdpfx Ahoyvq Nusvjd - Swing diameter over bed: 450 mm - Swing diameter over turret slide: 300 mm - Distance between centers: 595 mm - Standard diameter: 160 mm - Front bearing inner diameter: 90 mm - Number of tools: 12, max. 6 stations for driven tools - Tool shank cross-section: 20 mm - Max. boring bar shank diameter: 32 mm - Driven tool spindle speed: 100 – 2000 rpm - Feed rate on X-axis: 0.00001 to 250 mm/min; Z-axis: 0.00001 to 350 mm/min - Rapid traverse speed X and Z axis: 1260 mm - Tailstock travel: 450 mm The machine is equipped with a tailstock, a 12-station tool turret (including the tool holders shown in the photos), and a chip conveyor. Note: This item must be collected between 12.05. and 22.05.2026 on a specific date to be agreed upon. FCA D-74821 Mosbach – loaded onto truck

Condition: ready for operation (used), Year of construction: 2014, operating hours: 4,416 h, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 630 mm, turning diameter: 350 mm, spindle bore: 65 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 3,500 rpm, total height: 1,720 mm, total length: 2,870 mm, total width: 1,675 mm, overall weight: 4,500 kg, chuck outer diameter: 260 mm, spindle nose: A2-6, Equipment: documentation/manual, rotational speed infinitely variable, The Hwacheon Hi-Tech 200BL is a robust CNC lathe that stands out in practice for its strikingly simple operation. The machine features an intuitive design and predictable performance, making setup and operation feel quickly familiar. A major advantage is the configuration with only an X and Z axis. The lack of additional axes and complex functions keeps the operation clear and efficient. Itedpfx Aoyvqw Sshvod This HWACHEON HI-TECH 200BL machine is standard equipped with: - Chip conveyor + collection bin. - Schunk 3-jaw chuck (ROTA NC Plus 260-86) including various sets of top jaws. - Original HWACHEON and FANUC documentation. Weight & dimensions: - 4,500 kg - approx. 2870 x 1675 x 1720 mm (LxWxH)