Sliding bed lathe

HEYLIGENSTAEDT 260 EV/1250

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, space requirement width: 1,975 mm, space requirement length: 1,800 mm, space requirement height: 1,900 mm, Equipment: documentation/manual, Machine is in very good condition - used as a training machine until 2018; since then, the machine has hardly been in operation. Operating voltage 400 V Spindle mount ISO 40 Gujdpew U Aahefx Aa Ejd Quill stroke 100 mm Spindle speeds 63 – 3150 rpm Fixed table

Condition: good (used), Year of construction: 1996, Milling machine, universal milling machine, tool milling machine, drilling and milling machine -Manufacturer: EMCO, milling machine with digital display and hydraulic clamping -Clamping table: 800 x 400 mm -Clamping table: rotatable/tiltable/swivelable -Travel range X/Y/Z: 600/400/400 mm -Spindle mount: SK40 with hydraulic clamping Accessories: incl. 9 tool holders (see photos) Gsdpjxvraxefx Aa Eoud -Speeds: from 63 - 3150 rpm -Feed rate X/Y: 16-800 mm/min -Feed Z: 8-400 mm/min -Quick stroke: 100 mm -Rapid traverse X/Y: 2000 mm/min -Rapid traverse Z: 1000 mm/min -Coolant system: yes -Dimensions: 1740/1670/H1940 mm -Weight: 2200 kg

Condition: ready for operation (used), Year of construction: 1998, punching force: 22 t, total height: 2,300 mm, sheet thickness (max.): 6 mm, overall weight: 13,800 kg, table width: 3,000 mm, table length: 1,500 mm, table load: 100 kg, controller manufacturer: TRUMPF, product length (max.): 6,900 mm, This TRUMPF TRUMATIC 500 was manufactured in 1998. It features a maximum punching force of 220 kN and can handle sheet thicknesses up to 6 mm. The machine accommodates workpieces up to 150 kg, with a working range of 3000 mm on the X-axis and 1500 mm on the Y-axis. Contact us for more information about this machine. • Maximum punching force: 220 kN (approx. 22 t) • X-axis working range: 3000 mm without repositioning • Y-axis working range: 1500 mm • Maximum sheet thickness (steel): 6 mm • Maximum punching diameter: 76.2 mm • Maximum workpiece weight: 150 kg • X-axis speed: up to 90 m/min • Y-axis speed: up to 60 m/min • Stroke rate: up to 900 strokes/min in nibbling mode • Power supply: 400 V / 50 Hz, three-phase • Connected electrical load: approx. 19 kVA • Required compressed air pressure: 6 bar Guedpfxsx Uqzzs Aa Esd The machine is in working condition. It includes a large set of punches, dies, and tool holders. Dimensions Machine Depth 6000 mm

Condition: excellent (used), Year of construction: 1998, operating hours: 17,260 h, Table size: 1000 x 500 mm Tool holder: ISO 40 Travel paths: X-axis: 800 mm Y-axis: 500 mm Z-axis: 420 mm Distance between horizontal spindle axis and table: 210 – 630 mm Distance between vertical spindle nose and table: 130 – 550 mm Table load capacity: max. 500 kg Speed range: 50 - 4000 rpm Feed rate (infinitely variable): 5 - 2000 mm/min Rapid traverse in all axes: 8 m/min Vertical milling head, swiveling: ± 90° Manual quill stroke adjustment: 100 mm Drive power: 7.5 kW Dimensions (L x W x H): approx. 3000 x 2400 x 1975 mm Weight: approx. 3000 kg Accessories / Special features: • CNC contouring control HEIDENHAIN TNC 410 Guodpfxoxtu H Ne Aa Ejd • Electronic handwheel HEIDENHAIN HR 410 • SIEMENS AC servo drives • Data interface V 24 / RS 232 • Swiveling vertical milling head ± 90° right & left with 100 mm quill adjustment • Hydraulic tool clamping, vertical & horizontal, ISO 40 • Swivel-away device for the vertical milling head • Very wide speed range up to 4,000 rpm • Vibration-free operation thanks to rigid and heavily ribbed cast iron guideways • Ball screws for X, Y, and Z axes • All electrical control elements on one side, in a movable control panel • Fixed angle table with foldable chip guard • Coolant system integrated in the machine base • Hydraulic unit • Central lubrication • CE compliant Operating hours: 17,256 Spindle hours: 3,816 Image: shows brochure photo Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 2,500 rpm, quill stroke: 100 mm, For sale is an Emco tool milling machine, model FB-4. The machine was previously used exclusively for inter-company training purposes. Currently, two identical Emco FB-4 machines are still in stock. Tool Milling Machine V/H Gujdpfx Aaoyvra Is Esd Manufacturer: Emco Model: FB-4 Year of manufacture: 2005 Control: Heidenhain ND-750 display Technical parameters: ----- • Travel X-Y-Z: 450 x 300 x 350 mm • Clamping surface: 800 x 400 mm • Tool holder: SK-40 • Tool clamping: hydraulic • Quill stroke: 100 mm • Milling head swivels ± 90° • Spindle speed: 50 – 2,500 rpm • Speed selection: 18 steps • Electric central lubrication • Machine lamp • Coolant system • Splash guard cabin (foldable) • Weight: 1,550 kg • Dimensions LxWxH in mm: ..1,485 x 1,500 x 1,700 mm Accessories: ----- • 4x machine leveling feet • Operating manual • Counter bearing for horizontal machining • Shaft for horizontal machining • Table enclosure (currently removed) • 10x SK-40 tool holders

Condition: good (used), Year of construction: 1997, Manufacturer: Line Type: Seramill 240 Control: NUM 750 Travel X: 6000 mm Travel Y: 2500 mm Travel Z: 950 mm Column spacing: 2400 mm Guodpfx Aoyf A H Nja Eed Table: 6000 x 2100 mm Automatic milling head: 2.5° Spindle speed: 3200 rpm Feed rate: 10 m/min Machine weight: approx. 35 tons

Condition: new, Year of construction: 2026, machine/vehicle number: 26.07.06, functionality: fully functional, Fresan FP 80P - C Frame Eccentric Press - 80 Tons (800kN) TECHNICAL DATA: * Power: 80 tons (800kN) * Strokes Per minute: 60 (variable) * Ram-Table Distance: 400 mm * Stroke Adjustment: 0 - 112 mm * Ram Adjustment: 80 mm (motorized) * Table Dimensions: 600 x 900 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings Gujdpfonxh Hrjx Aa Eed * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: used, Year of construction: 1979, WANDERER TYPE:KFV2 X: 1200mm Y: 350mm Z: 450mm MADE IN GERMANY Gujdpfxsru A S As Aa Eod

Condition: used, Year of construction: 1995, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 800 x 400 mm range of revolution per miute: 63 - 3150 / 18 step U/min feed continuous: X/Y/Z: 8 - 800 / 8step mm/min. Gjdoytnd Aopfx Aa Esud spindle taper: SK 4 spindle head swivable left - right: 90 ° quill stroke: 105 mm total power requirement: 5,3 kW weight of the machine ca.: 2245 kg machine dimensions LxWxH: 2,1 x 2,8 x 1,9 m Control screen replaced with new LCD. The milling machine is equipped with measuring system with digital display PROTOTRAK MX2. The X and Y axes can run cycles. (interpolation), the Z-axis is moved manually. Spindle with right/left travel Automatic tool clamping via control command Coolant device (without container) Chip collection tray Tool accessories (comparable in the photo) *

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,320 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 45 rpm, quill travel distance: 100 mm, overall weight: 4,100 kg, Vertical milling machine FSS 400. Manufacturer: UNITECH - 2002. Readouts on 3 axes. Working table dimensions: 1600 x 400 mm Travel in the X axis (longitudinal): 1320 mm Travel in the Y axis (transverse): 400 mm Travel in the Z axis (vertical): 650 mm Maximum table load: up to 1500 kg Spindle taper: ISO 50 Spindle speed range: 45 – 2200 rpm Working feed range: 16 – 800 mm/min Spindle quill travel: 100 mm Vertical head swivel angle: ±45° Tool clamping: automatic / mechanical (electromechanical tool clamp) Main motor power: 11 kW Total connected power: approx. 14.5 kW Total weight: 4100 kg Overall dimensions (Length / Width / Height): approx. 2300 x 2000 x 2700 mm Gsdpezcvftefx Aa Eoud