Condition: ready for operation (used), Year of construction: 2002, operating hours: 33,908 h, functionality: fully functional, CNC – Lathe Manufacturer: WEILER Model: E 35 D Year of manufacture: 2002 Dedpfey R Uukox Ab Tskp Technical data Brand: WEILER Model: E35 D Year: 2002 Center distance: 950 mm Center height: 200 mm Turning diameter over bed: 410 mm Spindle bore: 54 mm Max. turning diameter: approx. 260 mm Spindle speed: 20 – 3000 rpm Power: 10 kW Dimensions: approx. L 2.60 x W 1.60 x H 1.70 m Weight: approx. 2.5 t Equipment • Operating manual • Coolant system • 3-jaw chuck • Collet chuck adapter All information subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Year of construction: 1995, turning diameter over bed slide: 500 mm, Universal lathe Make: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing over bed ø: 500 mm Djdpswudhujfx Ab Tokp Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live center • Coolant pump • Machine lamp All information subject to change. A live demonstration under power is possible at any time in our showroom.

Condition: used, Table Size 72” Dedpfx Aszkkcuob Tjkp Machine swing 84” Table speed Range 3.8 to 83 rpm. Feed range .005” to 0.250” per rev. Max Height under cross slide 48” Max Height under turret 48” Ram Travel 38” 4 Std jaws Main motor 40hp Newall 2 Axis Digital Read Out

Condition: used, Year of construction: 1952, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 520 mm turning length: 2500 mm Dodpfx Absu Tq U Is Tokp support travel z-axis: plan: ca. 500 mm support travel z-axis: Obersupport: ca. 300 mm centre height: 300 mm spindle passage: 90 mm range of revolution per miute: 3,2 - 382 / 22 step U/min range of feed in x - axis: längs: 0,213 - 2,67 / 36 step m/min range of feed in y - axis: quer: 0,070 - 1,11 / 36 step m/min tailstock quill taper MT: 6 total power requirement: 22 weight of the machine ca.: 8,2 t dimension machine xH: 5,3 x 1.,6 x 1,6 m transport measurements machine: ca. 5,5 x 1,7 x 1,6 m Equipment: Faceplate Ø 1000mm 4-fold turning tool holder Lynette Ø 250 closed Accesorios four-jaw chuck Ø 630 i.D. *

Condition: used, Year of construction: 1963, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 620 mm turning length: 3150 mm centre distance: 3150 mm turning diameter in the gap: 1200 mm length of gap: 800 mm weight of the machine ca.: 11,5 t dimension machine xH: 7,5 x 1,5 x 1,7 m incl. 2x steady rests and various tips Dkjdpfx Abou Ix Are Tjp *

Condition: used, Year of construction: 2005, turning length 200 mm swing diameter 20 mm spindle bore 20 mm control Cincom Number of working hours ca. 52.219 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale. Dksdpfx Abjzkbp Ej Top

Condition: excellent (used), Year of construction: 2004, A fully operational CNC lathe from Böhringer, model NG180, is available for sale. Dsdpfxex Swigo Ab Tjkp

Condition: excellent (used), Year of construction: 1981, Center height: 130 mm Swing diameter over bed: 260 mm Swing diameter over carriage: 140 mm Distance between centers: 600 mm Spindle bore: 30 mm Bed width: 255 mm Spindle mount: DIN 55027 size 5 Dkjdpfx Asxz Rfkeb Top Speed range: 35.5 - 3,150 rpm Longitudinal feed range: 0.04 – 0.4 mm/rev Transverse feed range: 0.02 – 0.2 mm/rev Metric threads: 0.2 – 18 mm Inch threads: 2 – 76 TPI Module threads: 0.4 – 13.5 module Diametral pitch threads: 2.6 – 36 DP Tailstock taper: MT 4 Drive power: 3 kW Dimensions (L x W x H): 2,140 x 850 x 1,400 mm Weight: 1,100 kg Accessories / Special features: • 3-jaw wedge bar chuck FORKARDT F 160 with jaw safety, Ø 160 mm • Quick-change tool post system "Multifix" size B • Coolant system with chip guard • Chuck guard • Hardened bedways • Lighting • Bed stop • Emergency stop switch New brake discs, new drive clutch, new V-belts, and new gearbox and V-belt bearing in 2026. Repair costs: €3,950.00 net. Options: New 2- or 3-axis digital readout K+C, fully installed – upon request Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 1984, Maximum turning height 180 mm Distance between centers 1000 mm Swinging diameter over bed 350 mm Swinging diameter over cross slide 200 mm Dkjdpfx Ajyud Itjb Top Bed width 255 mm Spindle bore 36.5 mm Spindle mounting, DIN 55027 Size 5 Speed range, 14 steps 28 – 2500 rpm Feeds, 9 longitudinal 0.04 – 0.4 mm/rev ditto, 9 facing 0.02 – 0.2 mm/rev 38 metric threads 0.2 – 18 mm 35 Whitworth threads 76 – 2“ 31 module threads 0.4 – 13.5 module 25 diametral pitch threads 36 – 2.6 pitch Tailstock mounting MK 4 Drive power 3 kW Machine dimensions L x W x H 2380 x 850 x 1800 mm Weight 1300 kg Accessories / Special features: • 2-axis digital display EASSON ES-8A • Quick-change tool holder system “Multifix” Size B • Chuck guard, foldable, electrically secured • Coolant system Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1999, Serial No. 37386, digital display, maximum turning diameter 165 mm, distance between centers 750 mm, spindle bore 42 mm, speed range 30 - 2,000 rpm, digital display. Dksdozkaxropfx Ab Top +++ ATTENTION: This machine is part of an online auction! +++

Condition: refurbished (used), Year of construction: 1977, turning diameter: 16,000 mm, faceplate diameter: 6,300 mm, year of last overhaul: 2026, Completely overhauled single-column vertical turning lathe, Blansko model SKSJ 1A, equipped with one vertical head for turning and milling operations. Technical specifications: Djdpszi S Tlofx Ab Tekp Faceplate diameter: 6300 mm Maximum workpiece height: 4800 mm Max. turning diameter with column near the faceplate: 8000 mm Max. workpiece diameter: 14700 mm Max. workpiece diameter for internal turning: 16000 mm Infinitely variable faceplate rotation: 0.5 – 20 rpm Max. workpiece weight: 100 tons Milling spindle max. speed: 1500 rpm 2-speed gearbox with 15 kW Siemens motor Manual clamping, ISO 50 taper tool Machine weight: approx. 220 tons The machine was completely overhauled in 2025 and supplied with the following brand-new components: - New electrical cabinet made with CE-compliant components (Siemens, Schrack, etc.) - New Siemens 828 numerical control, 100 kW main drive motor, 27 Nm feed motors, and ZF reducers with a 1/5 ratio - New ballscrews on 2 axes (vertical head and crossrail) - New scales on 2 axes, Heidenhain - The hydraulic and support systems made with CE-compliant components (Rexroth, Brevini, Atos, etc.) - New lubrication system, DROPSA-Italy or similar For more information, please contact us.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, • Turret overhauled in 2021 • Coolant pump upgraded to higher pressure/flow rate in 2021 • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic loading of parts via robot cell Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Maximum swing diameter: 550 mm Maximum turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single stage): 30 – 4000 rpm Drum turret Number of stations: 12, of which powered: 6 Tool shank diameter: 40 mm Speed range (two-stage): 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT / ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis Dsdpfjwwkx Eox Ab Tokp  Tailstock programmable drag function including various center points  12-position drum turret  Turret drive unit  Chip conveyor  Coolant system with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 pc. Heimbuch collet chuck SK 80, without collets  1 pc. Schunk Rota NCF 315 three-jaw chuck  1 pc. Schunk Rota NCF 250 three-jaw chuck  1 pc. Schunk Rota NCF 250 two-jaw chuck  1 pc. WTO broaching head  2 pcs. driven tools CAPTO axial tool  2 pcs. driven tools CAPTO axial radial tool  3 pcs. driven tools CAPTO radial tool  7 pcs. static tool holders  Installation elements  Documentation

Condition: reconditioned (used), functionality: fully functional, CAZENEUVE HB 725 x 5000 Lathe Distance between centers: 5000 mm Dkjdpfx Abey Dpvcj Tsp Center height: 315 mm Maximum turning diameter over bed: 725 mm Maximum turning diameter over saddle: 670 mm Maximum turning diameter over cross-slide: 400 mm Spindle bore: 81 mm Tailstock taper: MT6 Max. cross slide travel: 400 mm Number of spindle speeds: 18 Power: 18 HP Dimensions (L x W x H): 6640 x 1270 x 1355 mm Weight: 4,500 kg Fixed steady rest

Condition: good (used), Used 2-meter lathe from Colchester Type: Mastiff 1400 Turning length: 2000 mm Turning diameter over bed: 540 mm Spindle bore: 89 mm Includes 3-jaw and 4-jaw chuck Includes steady rest Dkjdpozi Salefx Ab Top 2-axis digital readout

Condition: excellent (used), Swing over bed 320 mm Distance between centers 800 mm Spindle speeds -4000 rpm Control: HEIDENHAIN Manual Plus M Dkjdei Ezhqepfx Ab Tjp Misc. accessories MARCELS MASCHINEN CH

Year of construction: 2013, condition: good (used), Swing over bed 380 mm Distance between centers 700 mm Spindle speeds -2500 rpm Dkodpfjhp Razex Ab Tjp Control: SIEMENS Optica Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Tailstock MK 5 Center height 355 mm Clamping surface . width 310 mm length 450 mm Quill stroke 160 mm Quill stroke diameter 90 mm Transport dimension: Dkodpfx Aotrnhfob Tsp L.700 mm W.310 mm H.480 mm Weight 170 kg

Condition: excellent (used), Tailstock (28485) Make Heiligenstedt MK 5 SPH 275 mm Pinole diameter 80 mm Dsdpetrnh Uefx Ab Tokp length 600 mm width 300 mm Height 400 mm

Condition: used, Year of construction: 2011, turning diameter 590 mm Dodpfx Ajzi E A Tsb Tokp turning length 1100 mm control Fanuc turning diameter over bed 800 mm total power requirement --- kW weight of the machine ca. 9,5 t dimensions of the machine ca. --- m

Condition: as good as new (ex-display), Year of construction: 2026, Optiturn L34 HS CNC lathe directly from the manufacturer. L34 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop switch - Central lubrication - Spindle and feed motors from Siemens - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 6.5 kVA Spindle Drive motor S1 operation 3.7 kW Torque drive motor S1 operation 23.6 Nm Torque at the spindle 40 Nm Spindle holder DIN 6350 A2-3 Spindle bore Ø 46 mm Coolant system Coolant pump output 95 W Tank capacity 75 liters Machine data Center height 165 mm Center width 600 mm Rotation Ø over cross slide Ø 146 mm Rotation Ø over machine bed Ø 350 mm Speed range Yvwdh0 Spindle speeds* 30 - 3500 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Dkjdpezi Evgofx Ab Tep Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 6,000 mm/min. Z-axis 8,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: as good as new (ex-display), Year of construction: 2026, Optiturn L28 HS CNC lathe directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Djdpfjzi Er Iex Ab Tokp Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop impact switch - Central lubrication - Reference switch - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download free of charge - Two-year SIEMENS warranty included Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 3.75 kVA Spindle Drive motor S1 operation 2.2 kW Torque drive motor S1 operation 14 Nm Torque at the spindle 28 Nm Spindle holder DIN 6350 A2-3 Spindle cone 5C Spindle bore Ø 30 mm Cooling lubricant system Coolant pump output 95 W Tank capacity 25 liters Machine data Center height 169 mm Center width 430 mm Rotation Ø over cross slide Ø 200 mm Rotation Ø over machine bed Ø 300 mm Speed range Spindle speeds* 40 - 4,000 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Bhajn7pvcu Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 10,000 mm/min. Z-axis 12,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: used, turning diameter over cross slide: 710 mm, spindle bore: 180 mm, turning diameter: 1,000 mm, turning length: 4,000 mm, quill stroke: 250 mm, quill diameter: 125 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 6 rpm, bed width: 560 mm, overall weight: 9,700 kg, Equipment: rotational speed infinitely variable, KRAFT BV-40160 – USED HEAVY-DUTY LATHE A KRAFT BV-40160 from a company liquidation. Originally delivered to the previous owner as new from the factory in 2016/2017. On-site inspection or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, turning diameter 1,000 mm, distance between centers 4,000 mm - Additional guide for the tailstock on the lower machine bed - Frequency-controlled main drive 22 kW - Swiveling 4-position tool holder Dkodpfx Aezi Duhjb Tsp TECHNICAL DATA - Turning diameter over bed: 1,000 mm - Turning diameter over cross slide: 710 mm - Swing diameter in the gap: 1,280 mm, gap width 450 mm - Center height: 500 mm - Distance between centers: 4,000 mm - Bed width: 560 mm (3V + 1 flat), additional tailstock guide on the lower bed - Cross slide width: 350 mm - Spindle bore: 180 mm, spindle nose A2-15 - Spindle speeds: 4-speed, continuously variable 6-800 rpm - Main motor: 22 kW with frequency inverter - Cross movement of tailstock: 550 mm, upper slide movement: 225 mm - Tailstock quill Ø 125 mm, stroke 250 mm, taper MK 6 - Tool bit cross-section: 40 mm - Lead screw: Ø 60 mm x 2 T.P.I. - Weight: net approx. 9,000 kg / gross approx. 9,700 kg - Dimensions: approx. 5,845 x 1,950 x 1,925 mm STANDARD EQUIPMENT - Coolant system - Fixed steady rest Ø 60-380 mm - Swiveling, manual 4-position tool holder - Sliding chuck guard with electrical interlock - Swiveling, electrically interlocked guard for the upper tailstock - Traveling, rear chip / splash water guard - Halogen machine lamp - Installation / leveling elements, machine tools - German and English technical documentation, CE version - 400 V, 50 Hz, 3-phase CONDITION Used machine from a company liquidation. Sold "as is, where is", no warranty. On-site inspection or via video call is strongly recommended. OUR SERVICE Online or on-site factory inspection, transport organized on request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of the FDM, the trade association of the machine and tool wholesale trade. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: good (used), Year of construction: 2000, center width: 2,000 mm, Control system: SIEMENS 840 D (manual turning) Spindle module replaced in 2008. Swinging diameter over the bed: 630 mm Swinging diameter over the carriage: 370 mm Spindle bore: 105 mm Distance between centers: 2,000 mm Djdoy A I I Ispfx Ab Tokp The machine is supplied with a 250 mm manual chuck. Spindle speed range 1: 4 - 430 rpm Spindle speed range 2: 430 - 2500 rpm Power of the main motor: 18.5 kW S6-40%

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 168 mm, travel distance Z-axis: 515 mm, overall weight: 11,000 kg, controller manufacturer: FANUC, number of axes: 3, This 3-axis CMZ TTL-66-66-TTY-T2Y was manufactured in 2021, offering advanced horizontal turning capabilities. Ideal for complex and precise metalworking tasks, this machine ensures efficient production with its robust design and modern technology. If you are looking to get high-quality turning capabilities, consider the CMZ TTL-66-66-TTY-T2Y machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits - Voltage: 400 V AC- Phases: 3 + N + PE- Frequency: 50 Hz- Maximum Power: 90 kVA- Maximum Current: 125 A- Pneumatic Pressure: 6 bar- Machine Language: German- Control System: Fanuc (G Codes Type A)- Left Spindle Equipment: LPS system, Axial stop, Coolant supply through spindle, Collet chuck Hainbuch AXFIX 65 (standard) 2703/0008- Right Spindle Equipment: LPS system, Coolant supply through spindle, Tailstock long version for live center CM 3, Collet chuck Hainbuch AXFIX 65 (standard) 2703/0008- Tool Preset Device: Tool presetter included- Chip Disposal: Rear chip conveyor with double chain- Upper Tool Turret (T1): High-pressure coolant pump with 3 programmable stages (35, 15 & 6 bar), including 75µm filter- Lower Tool Turret (T2): High-pressure coolant pump with 3 programmable stages (35, 15 & 6 bar), including 75µm filter- Coolant Features: Coolant nozzles above spindles, Coolant washing nozzle, Tank level monitoring- Monitoring Systems: Tool life management, Tool load monitoring- Extraction System: Connection flange Ø150, Extraction unit LTA E120-X1-H with installation parts, hoses and support- Automation / Gantry Loader: GL20-11 3-axis CNC Gantry Loader (travel path to both sides), Servo-controlled 2x180° double swivel gripper for shaft parts GLII, Special gantry enclosure- Workpiece Handling: Workpiece carrier WS-700-3000 on front left side, WS-700 with 3 rows of V-guides (2 shafts per row), CMZ workpiece carrier for round and square material (V-support 90° version), Connection interface for customer unloading belt- Tooling Holders Provided: 8x Double radial holders for tools 20x20 (310.04.092046), 6x Holders for boring tools Ø32 H75 (310.04.092060), 2x TTL/10400/02 Axial holders for driven tools ER32 with internal coolant 70bar (12000rpm), 2x TTL/10400/09 Radial holders for driven tools with internal coolant 70bar ER16 (Max 12000rpm)- Gripper Jaws Included: Raw material jaws (32mm/30-35mm, 35mm/35-40mm, Square 30mm/30x30mm), Finished part jaws (32mm/30-35mm, 38-40mm/35-40mm, Square 30mm/30x30mm)- rotating viewing window / machine status light- Cmz requires a signal indicating that a part can be placed / output signal indicating that the conveyor can move freely Dodpfsx D Ei Asx Ab Tjkp Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2013, functionality: fully functional, spindle bore: 105 mm, turning diameter: 800 mm, turning length: 3,000 mm, quill stroke: 240 mm, quill diameter: 100 mm, spindle speed (max.): 720 rpm, spindle speed (min.): 7 rpm, bed width: 600 mm, overall weight: 5,500 kg, rapid traverse X-axis: 4 m/min, rapid traverse Z-axis: 2 m/min, workpiece weight (max.): 2,000 kg, IMTI SDM 800/3000 – USED HEAVY-DUTY LATHE Dkjdpszi Dhbjfx Ab Top An IMTI SDM 800/3000, manufactured in 2013, from a company liquidation. Originally an exhibition/demonstration machine in our showroom, sold to the previous owner in 2016. Inspection on-site or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, center distance 3,000 mm - Multifix quick-change tool holder with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm - 3-axis digital display SINO SDS6-3V TECHNICAL DATA - Swing over bed: 800 mm - Swing over cross slide: 1,000 mm - Swing over carriage: 480 mm - Center distance: 3,000 mm - Bed width: 600 mm - Spindle bore: 105 mm, spindle nose DIN 55027 size 11 - Spindle taper: Ø 120 mm, taper 1:20 - Spindle speeds: 7-720 rpm - Thread cutting: metric 1-240 mm (52 steps), inch 1-14 (26 steps), module 0.5-120 mm (53 steps) - Longitudinal feed 0.1-24.3 mm/rev, cross feed 0.05-12.5 mm/rev - Rapid traverse longitudinal/cross: 4,000 / 2,000 mm/min - Tool toolbit cross-section: 50 x 50 mm - Cross slide travel: 420 mm, top slide: 200 mm - Tailstock quill Ø 100 mm, taper MK 6, stroke 240 mm - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Main motor: 11 kW, rapid traverse motor: 1.1 kW - Workpiece weight between centers: max. 2 t, in chuck: max. 500 kg - Total weight: approx. 5,500 kg STANDARD EQUIPMENT - Multifix quick-change tool holder size D1 with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm incl. chuck flanges 350/500 mm - 3-axis digital display SINO SDS6-3V - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Complete coolant system - Fixed center, drive plate, change gears - Electrical end stop longitudinal, halogen machine lamp - German and English technical documentation incl. CE declaration of conformity - 400 V, 50 Hz, 3-phase CONDITION Used machine, manufactured in 2013, from a company liquidation. Sold “as is”, no warranty. Inspection on-site or via video call is highly recommended. OUR SERVICE Online or on-site factory visit, transport organized upon request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact for spare parts and support, member of the FDM, the trade association for wholesale trade in machines and tools. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.