Used heavy-duty lathe
Kraft BV-40160

Name: Kraft BV-40160
Brand: Kraft
Availability: InStock

Condition

Used

Location

Nürnberg

Machine data

Machine type:: Used heavy-duty lathe

Manufacturer:: Kraft

Model:: BV-40160

Condition:: used

Price & Location

Location:: Nürnberg, Deutschland

Call

Technical details

Turning diameter over cross slide:: 710 mm

Spindle bore:: 180 mm

Turning diameter:: 1,000 mm

Turning length:: 4,000 mm

Quill stroke:: 250 mm

Quill diameter:: 125 mm

Spindle speed (max.):: 800 rpm

Spindle speed (min.):: 6 rpm

Bed width:: 560 mm

Overall weight:: 9,700 kg

Equipment:: rotational speed infinitely variable

Details about the offer

Listing ID:: A22273542

Update:: 07.07.2026

Description

KRAFT BV-40160 – USED HEAVY-DUTY LATHE

A KRAFT BV-40160 from a company liquidation. Originally delivered to the previous owner as new from the factory in 2016/2017. On-site inspection or via video call is possible at any time.

KEY FEATURES

- Conventional guide and lead screw heavy-duty lathe, turning diameter 1,000 mm, distance between centers 4,000 mm
- Additional guide for the tailstock on the lower machine bed
- Frequency-controlled main drive 22 kW
- Swiveling 4-position tool holder

TECHNICAL DATA

- Turning diameter over bed: 1,000 mm
- Turning diameter over cross slide: 710 mm
- Swing diameter in the gap: 1,280 mm, gap width 450 mm
Nsdezi Duhepfx Ag Newk
- Center height: 500 mm
- Distance between centers: 4,000 mm
- Bed width: 560 mm (3V + 1 flat), additional tailstock guide on the lower bed
- Cross slide width: 350 mm
- Spindle bore: 180 mm, spindle nose A2-15
- Spindle speeds: 4-speed, continuously variable 6-800 rpm
- Main motor: 22 kW with frequency inverter
- Cross movement of tailstock: 550 mm, upper slide movement: 225 mm
- Tailstock quill Ø 125 mm, stroke 250 mm, taper MK 6
- Tool bit cross-section: 40 mm
- Lead screw: Ø 60 mm x 2 T.P.I.
- Weight: net approx. 9,000 kg / gross approx. 9,700 kg
- Dimensions: approx. 5,845 x 1,950 x 1,925 mm

STANDARD EQUIPMENT

- Coolant system
- Fixed steady rest Ø 60-380 mm
- Swiveling, manual 4-position tool holder
- Sliding chuck guard with electrical interlock
- Swiveling, electrically interlocked guard for the upper tailstock
- Traveling, rear chip / splash water guard
- Halogen machine lamp
- Installation / leveling elements, machine tools
- German and English technical documentation, CE version
- 400 V, 50 Hz, 3-phase

CONDITION

Used machine from a company liquidation. Sold "as is, where is", no warranty. On-site inspection or via video call is strongly recommended.

OUR SERVICE

Online or on-site factory inspection, transport organized on request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of the FDM, the trade association of the machine and tool wholesale trade.

Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2009

23 listings online

Call

Send inquiry

Telephone & Fax

+49 6158 ... show

These listings may also fit your interest.

Listing

Heavy-duty lathe BV-40160 Kraft BV-40160

Nürnberg

18,455 km

Heavy-duty lathe BV-40160
KraftBV-40160

Call

Condition: used, Year of construction: 2016, functionality: fully functional, Conventional guide and lead screw lathe for heavy-duty machining of large workpieces. With a 1000 mm turning diameter over the bed and a 4000 mm distance between centers, the Kraft BV-40160 covers the entire spectrum from long shafts to heavy flanges. DRIVE & SPINDLE - Main motor 22 kW with frequency inverter, stepless speed control 6–800 rpm in 4 gear stages - Spindle bore 180 mm, spindle nose A2-15 - Turning diameter in the cross slide 1280 mm for single parts CAPACITIES - Turning diameter over bed: 1000 mm - Turning diameter over cross slide: 710 mm - Distance between centers: 4000 mm - Center height: 500 mm - Bed width: 560 mm (3 V + 1 flat) TAILSTOCK - Quill diameter 125 mm, stroke 250 mm, taper MK6 THREADS & FEEDS - Lead screw diameter 60 mm - Metric threads 0.8–14 mm, inch 2–28, module 0.4–7, DP 4–56 - Longitudinal feed 0.05–0.84 mm/rev - 4-position tool holder, tool shank cross-section 40 mm TECHNICAL DATA - Year of manufacture 2016 - Net/gross weight 9000 / 9700 kg - Dimensions (L×W×H) 5845 × 1950 × 1925 mm - Connection 400 V, 50 Hz, 3 phases CONDITION Used, operated for less than one shift. Located near Nuremberg, available for inspection while powered on. Sold as is, no warranty. ACCESSORIES (as shown in the photos) - Faceplate (spindle nose A2-15) - Steady rest / follower rest - 4-position tool holder Nwjdpfezpfgfjx Ag Njk - 2-axis digital readout (DRO) - Tailstock with center Price on request. We will be happy to advise you – competent consulting and nationwide service.

See details

Listing

Gap Bed Centre Lathe Huvema Lathe 560 x 2000

United Kingdom

18,620 km

Gap Bed Centre Lathe
Huvema Lathe560 x 2000

Call

Condition: like new (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 85 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 2,000 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, Turning diameter in gap: 785 mm, Huvema HU560 x 2000 Gap Bed Centre Lathe Year 2011 , CE Rated Spindle Speeds 25-1600rpm Distance Between Centres 2000mm Swing Over Bed 560mm Swing Over Cross Slide 355mm Tail Stock MT5 2 Axis Newall DRO Quick Change Tool Holder With Holders D1-8 Camlock Chucks Excellent Condition Interlocked Guards Work Light & Coolant System Machine Comes With: 3 Jaw Chuck & Reverse Jaws - 300mm 6 Jaw Chuck - 300mm 4 Jaw chuck - 400mm Nsdpfx Agjzfguis Newk Faceplate - 450mm Fixed Steady x 2 Travelling steady Fully Serviced And Ready For Production

See details

Listing

Kakanj

18,104 km

Wheel loader
Caterpillar950 G-II

€24,000

ONO plus VAT

Call

Listing

Concrete block production plant HENKE VARIANT 140/100

Orle

17,739 km

Concrete block production plant
HENKEVARIANT 140/100

€69,000

Fixed price plus VAT

Call

Listing

Mot. tank- boiler turning device OERLIKON RB-AFV/FV 4000 Syn

Rödermark

18,557 km

Mot. tank- boiler turning device
OERLIKONRB-AFV/FV 4000 Syn

Call

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Motorized tank/boiler turning device with rail-mounted chassis Technical data: - Total load capacity, driven + follower unit: 40,000 kg - Load capacity per tank/boiler turning device: 20,000 kg - Workpiece diameter: approx. 500 - 3,500 mm - Axle distance of the support rollers adjustable via trapezoidal screw spindle - Roller diameter: 500 mm Nwedpshcnhmjfx Ag Njk - Roller width: 150 mm - Driven unit with drive on both sides - Continuously adjustable rotational speed - Handheld remote control for forward and reverse rotation - Drive: 400 V - Both units are mounted on rail-mounted chassis - Space requirement, driven unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Space requirement, follower unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight, driven unit: approx. 2,500 kg - Weight, follower unit: approx. 1,800 kg

See details

Listing

Gear Hobbing Machine - Vertical GLEASON- PFAUTER P 2400/2800

Germany

18,510 km

Gear Hobbing Machine - Vertical
GLEASON- PFAUTERP 2400/2800

Call

Condition: used, Year of construction: 2007, workpiece diameter nominal 2400 mm max. workpiece diameter 2800 mm max. module 30 mm control Siemens Sinumerik 840 D dividing plate diameter 2200 mm table diameter 2500 mm Table hole Diameter / depth 800 / 875 mm max. table load 40000 kg Table rpm 4,5 min-1 clamping length max. 375 mm clamping diameter max. 350 mm cutter diameter max. 2800 mm Cutter arbor cone HSK-B160 swivelling range milling head + 30/-45° Distance Cutter - Workpiece 615 / 1600 mm weight of the machine ca. 57 t Slide drives: - Feed & rapid traverse speed: - axial 4000 mm/min - radial 3000 mm/min - tangential 3000 mm/min Equitment/Accessories: - IFK2 internal milling head - Milling arbor with spacers - chip conveyor Njdpfx Agsw Rf S Ss Njwk - Oil mist extraction - technical Documentation

See details

Listing

Oberhausen

18,539 km

Round table
ZEATZPHV-Baureihe

Call

Condition: new, ZEATZ NC rotary tables, PHV series – available for short delivery times The ZEATZ NC rotary tables from the PHV series stand for the highest precision, stability, and flexibility in modern machining. Ideal for positioning, turning, and simultaneous machining in a wide range of applications. Your advantages at a glance: ✔ Integration into existing machines with HEIDENHAIN or SIEMENS control systems ✔ Service & technical support directly from JMT ✔ Individual designs and customer-specific solutions ✔ High load-bearing capacity for heavy workpieces Why ZEATZ: ZEATZ stands for innovative NC rotary table solutions with the highest precision and reliability. Thanks to robust construction, backlash-free drive systems, and state-of-the-art control technology, the rotary tables are ideally suited for demanding machining processes. Technical features: Working position: Vertical / Horizontal Applications: Precise positioning, stepless turning, and interpolative machining in a single setup Sizes: Faceplate diameter: 500 / 600 / 800 / 1,000 / 1,200 mm (optional square clamping surfaces also available) Max. workpiece weight: Horizontal: up to 20,000 kg Nwjdpfem Tvz Dox Ag Nek Vertical: up to 4,000 kg Positioning accuracy: ± 3" Integration: Compatible with HEIDENHAIN and SIEMENS control systems Your advantages: ✔ Official distribution partner for ZEATZ in Germany ✔ On-site technical support and service ✔ Fast supply of spare parts ✔ Support for integration and commissioning ✔ Numerous reference projects available in Germany

See details

Listing

București

17,468 km

Center lathe
SAROSPS 1250x9000

Call

Condition: excellent (used), Year of construction: 1997, Romanian Lathe SARO SPS 1250x9000, Manufacturer: Saro Targoviste, Year of Manufacture: 1997. Chuck diameter: 1250 mm, Maximum swing over bed: 1250 mm, Spindle diameter: 250 mm, Distance between centers: 9000 mm, Maximum swing over slide: 920 mm, Maximum workpiece weight between centers: 15,000 kg. Grinding attachment available! Video of the machine under power available. Weight approximately 25 tons. Nwodpfx Agoy Icbas Nek

See details

Listing

Niefern-Öschelbronn

18,628 km

CNC lathe
MazakQuick Turn 10

Call

Condition: used, Year of construction: 1996, operating hours: 7,827 h, functionality: fully functional, machine/vehicle number: 119713, turning diameter over cross slide: 160 mm, turning length: 244 mm, turning diameter: 160 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 290 mm, spindle motor power: 10,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 1,780 mm, total length: 2,000 mm, total width: 1,330 mm, quill travel distance: 150 mm, quill diameter: 55 mm, quill stroke: 150 mm, workpiece weight (max.): 25 kg, overall weight: 2,700 kg, bar passage: 40 mm, chuck outer diameter: 154 mm, bar diameter (max.): 45 mm, spindle diameter: 50 mm, Equipment: documentation/manual, rotational speed infinitely variable, The Mazak Quick Turn 10 is a compact CNC lathe manufactured by the Japanese company Mazak. It has been specifically developed for the precise machining of small and medium-sized turned parts and is widely used in mechanical engineering, toolmaking, as well as in series production. Nwsdpfx Asyt E Nvjg Nsk The machine features a robust slant-bed design, a tool turret, and the dialog-based Mazatrol control system, which enables fast programming directly at the machine. This makes it suitable both for single parts and small series production. Control: Mazatrol T-Plus Standard chuck: Kitagawa N-06A0515 The quoted price does not include dismantling, packaging, or shipping. Sale ex location, subject to prior sale. The machines are sold in used condition; any warranty and guarantee are excluded.

See details

Listing

MORI SEIKI NL2000SY/500 MORI SEIKI NL2000SY/500

Italy

18,654 km

MORI SEIKI NL2000SY/500
MORI SEIKINL2000SY/500

Call

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, number of axes: 6, This 6-axis MORI SEIKI NL2000SY/500 was manufactured in 2005, featuring X-axis travel of 260 mm, Z-axis travel of 590 mm, spindle power of 5.5 kW, and a spindle speed of 6,000 rpm. It includes a 12-position tool turret. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL2000SY/500 machine we have for sale.Contact us for more information. Nwedpfx Agox D R Aue Nsk • Tool turret: 12 positions

See details

Advertise here