Condition: used, Year of construction: 2012, total length: 2,250 mm, total width: 3,250 mm, total height: 1,700 mm, Weight: 890 kg - Table width [mm]: 1040 Fjb Hl R Uewcd D Se Rjgb - Scoring saw blade diameter [mm]: 120 - Roll table length [mm]: 3200 - Controlled axes: 1 - Digital readout: 1 - Max. saw blade diameter [mm]: 400 - Scoring blade: 1 - Year: 2012 - Documentation available: No - Serial number: AB/211050 - Voltage [V]: 400 - Transport dimensions: 2250mm x 3250mm x 1700mm (l x w x h) - Transport weight [kg]: 890kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2020, Edgeband thickness max: 8 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece length min: 160 mm Workpiece width min: 60 mm Feedrate max: 10 m/min Electromotoric height adjustment: Yes Fgeb Hlswcdg Hs R U Reb Spraying device: Yes Premilling unit: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 1 motor Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Aggregates actuated by control: NC-axes Type: left-side machine Machine length: 4.930 mm Control: HOLZ-HER EDGECONTROL TOUCH PPC 319

Condition: good (used), Year of construction: 2001, Good, used condition. Few operating hours (1675 hrs). Motor: 11 kW. Throughput up to a maximum of 220 kg/h. Briquettes: 150x60 mm. Fob Hljwcc D Rj R U Regb Press dimensions: approx. 2200x3000x1920 mm (LxWxH). Control cabinet dimensions: 500x1250x2120 mm (LxWxH). Weight approx. 3000 kg.

Year of construction: 1997, Condition: used, 1 SCHECHTEL UX 100/S segmental folding machine mobile, with triple coil carriage and unwinder, 100 cm Color: green Year of manufacture: 1997 Fgsb Hewccniel R U Rjb Condition: used

Condition: used, machine/vehicle number: 007228, X axis working area: 2500 mm Y axis working area: 900 mm Number of controlled axes: 3 axes Fgsb Hl R Ustvrirs Reb Total number of drilling spindles: 16

Condition: used, 4304-400, FN, four-jaw faceplate Fgob Hlethfibe R U Reb Model: 4304-400 Condition: Used

Condition: used, Year of construction: 2013, total height: 2,240 mm, total length: 5,240 mm, total width: 2,500 mm, Empty weight: 2.700 kg Price: On request - Main motor power [kW]: 9.5 - Number of controlled axes [pcs]: 3 - Working range X [mm]: 3050 - Working range Y [mm]: 1250 Fgeb Hlowcbr Hj R U Rob - Working range Z [mm]: 1810 - Number of milling spindles [pcs]: 1 - Year: 2013 - Documentation available: Yes - CE mark available: Yes - Serial number: AA1/017355 - Voltage [V]: 400 - Transport dimensions: 5240mm x 2500mm x 2244mm (l x w x h) - Transport weight [kg]: 2700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: refurbished (used), Wood waste and bark shredder ERJO. Completely renovated. Yan knives and counter knives installed. Fgob Hljl Sli Do R U Reb

Condition: ready for operation (used), Year of construction: 1999, Schuko COMPACTO 600S briquette press VACOMAT 200 with chip container, agitator, and discharge screw Fgjb Hl R Ujwd Ufio Rsb The ideal chip disposal solution for a small business This extraction system was used to extract approximately five machines. The extraction pipes, electric slide valves, etc., are all still in place.

Condition: used, 1 MARTIN sliding table saw with EUMACOP AL-KO FMRG 1/160 extraction system mobile, see photos and inspection, self-assembly Color: green Feb Hl R Uowccdwj Rsgb Condition: used

Condition: as good as new (ex-display), Year of construction: 2021, total width: 1,618 mm, total length: 1,830 mm, total height: 2,400 mm, overall weight: 5,000 kg, type of input current: three-phase, input current: 81 A, input frequency: 60 Hz, opening width: 100 mm, operating temperature: 140 °C, cylinder diameter: 65 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Manufacturer : JOOS Model: HPS 20 year of production 2021 Total pressure force : 200 kN 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Pressure : 2.0 daN / cm2 5 heating plates size : 1000mm x 1000mm Operating temperature : 0℃ - 140℃. Infinitely adjustable temperature. Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Total power - 64 kW (81A , 60Hz) Weight - 5000 kg Press new - never used Full technical documentation included. Fgob Hl Rot Eq E Ss U Reb

Condition: used, LJ-0C0300-X140, SMC Actuator Fgsb Hl Rjrazrxo U Rjb Model: LJ-0C0300-X140 Condition: Used

Condition: used, Year of construction: 2010, total length: 3,400 mm, total width: 2,300 mm, total height: 2,000 mm, Weight: 1.250 kg Price: On request Touchscreen of the machine does not work. Settings can only be adjusted using a computer mouse.  - Table width [mm]: 1150 - Roll table length [mm]: 3200 - Year: 2010 - Documentation available: No - CE mark available: Yes - Serial number: 604.09.062.10 - Transport dimensions: 3400mm x 2300mm x 2000mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fgsbowca Ndj Hl R U Reb Peter Stroomberg

Condition: new, Year of construction: 2025, Functionality: fully functional, Hydraulic log ladder, for log diameters from 7 cm to 66 cm. Fgjb Hl Rev N Eiqs U Rob

Condition: as good as new (ex-display), Year of construction: 2025, Special price for trade fair machine *Available upon request Combination of: mütek MPP 60 briquetting press + MMJET 350 dust extractor *Approved for indoor installation *Both individual machines are fully manufactured and in stock; they only need to be connected. 1. Technical specifications for the briquetting press: Our best-selling briquetting press, the classic. + Proven, simple technology for extremely low error rates + 25 years of experience, ongoing development, and know-how + Several thousand machines in use with satisfied customers + Excellent price-performance ratio Customs tariff number: 84793010 Briquette diameter: 50 mm Feb Hl Rsd Su Hxj U Regb Front bushing: 50 mm Maximum briquette stroke: 40 mm Optional briquette stroke: 40 mm Throughput (depending on material): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter . Motor power: 5.5 kW, 400 volts / 50 Hz / 3-phase Floor area of entire system: 2.2 x 1.1 x 2.8 m L x W x H Height - 2.8 m (special container) Delivery also possible in two components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Cooling option for crimping tongs: no Cooling option for hydraulic oil: yes Fill level monitoring option: yes CE compliant 2. Technical specifications for the MMJET 350 clean air extraction unit: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when standing in front of the dust bin) Residual dust content: 0.1 mg/m³ Max. flow rate: 8000 m³/h Nominal flow rate (20 m/s): 6950 m³/h Filter area: 71 m² Negative pressure: 2630 Pa Automatic filter cleaning Cartridge filter Jet cleaning Powder fire extinguisher installed (inspected every 2 years by a specialist company) Raw material requirements: - The moisture content (dry) must be between a minimum of 6 and a maximum of 18% - Compressed air provided by the customer - Maximum chip length 15 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The customer must select a press large enough to remove more material than is sucked in at peaks. - The feed must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result.

Condition: ready for operation (used), Tenoning machine , made by Helma type: 9461 Spindle 30 mm motor 4 Kw /9000 rpm Fgob Hl R Ueud R Aas Rjb 2 x working places Hydraulic 2 pressure cylinders from above Hydraulic table top drive

Condition: used, Year of construction: 2017, Horizontal panel saw with rear loading via lifting table and automatic preloading roller conveyor PowerTouch Numerical Control with CADmatic 4.5 PROFESSIONAL Barcode Label Printer ecoPLUS technology for energy saving (up to 20% less) Electrical cabinet air conditioner Cutting length mm 3800 Cutting width mm 2200 Blade projection 80 mm Rear panel loading via automatic lifting table with rear left pre-loading table Lateral aligner integrated into the blade carriage No. 1 fixed front Bakelite table with air curtain system for unloading the panels No. 2 adjustable front bakelite tables with air curtain system for unloading the panels Main blade group 11 kW Engraving group Kw 2.2 Adjustable speed of the blade carriage up to 130 mt\min Pusher wagon with 10 clamps Power Concept system to enable cutting pattern optimization with up to 40% increased productivity TECHNICAL DETAILS TO BE CHECKED Fgebjwd R Rho Hl R U Rjb

Condition: used, Year of construction: 2003, machine/vehicle number: 92630105, ORMA multi-shelf press Shelf size 2500x1300 mm Number of shelves 4 pcs Fjb Howd Rxrol R U Rogb Steam heating

Condition: used, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fgjb Howcaqnel R U Rsb Glenn Smeets

Condition: excellent (used), VK450 2RE log peeler.Equipped with two rotors. One is a stump rotor. The other is the peeling rotor. Min-max tree diameter 8-45 cm. Min tree length 3 m. Complete with original VK centring conveyor. Fjbeulv Hze Hl R U Rogb To be sold after overhaul.

Condition: like new (used), Year of construction: 2022, operating hours: 1,000 h, Functionality: fully functional, Custom-made for wood and plastic processing Planer with a planing width of 650 mm and variable speed control Smooth feed conveyor with variable feed speed Vacuum table can be switched on and off Feb Hl Rswd N U Es U Rjgb

Condition: used, Year of construction: 2018, Functionality: fully functional, saw band length: 5,530 mm, saw band width: 50 mm, cutting speed: 28 mm/min, cutting width (max.): 400 mm, cutting height (max.): 400 mm, power: 15 kW (20.39 HP), net weight: 880 kg, The machine is in good condition and it is working . Fgob Howd N Tujl R U Reb

Condition: ready for operation (used), Year of construction: 1981, Functionality: fully functional, working width: 1,000 mm, No reserve price - guaranteed sale to the highest bidder! A complete, fully CNC-controlled planer is for sale. A viewing/training session is available upon purchase prior to disassembly! TECHNICAL DETAILS Costa Planer Number of spindles: 10 Control: CNC Spindle Configuration 1. Spindle horizontal 2. Lifting spindle right vertical 3. Lifting spindle left vertical 4. Lifting spindle horizontal 5. Lifting spindle right vertical 6. Lifting spindle left vertical 7. Lifting spindle top horizontal 8. Lifting spindle bottom horizontal 9. Lifting spindle bottom horizontal 10. Jointer spindle bottom horizontal 1x Canali Band Saw 1x Büttfering Sander Working Width: 1100 mm Number of Units: 3 1x Combination Unit 1x Single Unit 1x Brush Unit Fjb Hl R Uswd N Dge Regb Conveyor Technology Stacking Unit Rupa Vacuum Lifter (age: approx. 1.5 years) Cross Conveyor 2x Longitudinal/Cross Conveyors Roller Conveyor with Discharge Roller Conveyor to Büttfering Sanding machine Lifting platform Maintenance was always carried out at regular intervals and professionally. Previous application: Production of wainscoting and parquet (panels) Reason for sale: New construction Machine available from September 2025!

Condition: used, Year of construction: 2009, machine/vehicle number: A0908/7866, working width: 250 mm, KOCH SBD-B Saw-Mill-Drill - Pass-Through Machine The machine has the following functions - loading magazine - 2 units with a formatting saw diameter 400/30 mm - 4 milling units with oscillation 4KW 18,000 rpm adjustable pneumatic oscillation - 2 horizontal drilling supports head 7 spindles (2 in the 32 mm module, 5 in the 16 mm module) - 3 vertical drilling supports head 14 spindles (12 in the 32 mm module + 2 extreme angular in the 32 mm module - 3 horizontal drilling supports Y axis 2 heads 16 spindles (14 spindles in the 32 mm module + 2 angular in the 32 mm module + 1 head 8 spindle (7 in the 32 mm module + 1 middle angle 32 mm - Return belt to the operator - Supports for long elements The machine does not have doweling units Dimensions of processed elements L- 350-2500 W- 30-200 Gr- 15-75 Machine configured for processing table elements, sample elements in the attachment Fjb Hjwd Rlfjl R U Rsgb

Year of construction: 2025, Condition: new, Functionality: fully functional, The UMG-119.17 rough log splitting machine is designed to cut 2.5 meter long logs in half. The logs are fed into the machine perpendicular to the direction of movement, which ensures high cutting performance, 20 cuts per minute. Fgjb Hl Rswd Nu Ej U Rob