Condition: excellent (used), GRAULE ZS135N pull saw - used - automatic brake ----- Technical specifications ----- Cutting height: 135 mm, Cutting length: 420 mm, Pivoting angles: 45-90-45°, Tilt angles: 45°, Motor: 3 kW Quality information: Fjlewcq Rlerhadcegb - Guides checked/adjusted - Complete basic inspection - Complete basic cleaning - Electrical system checked - Ready for immediate use

Condition: excellent (used), Year of construction: 2015, Throughfeed drilling machine WEEKE BHT 500 with destacking device HOMAG mod. TSH 250/QR/25/12 Fslowfia Dsrhadcogb

Condition: excellent (used), Functionality: fully functional, The machine is in good technical condition and ready for immediate use. - Max. working width - 630 mm - Max. working height - 300 mm Fslrhajwfh U Hodcsgb

Condition: new, Year of construction: 2025, operating hours: 6 h, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Fgslogl Nlmorhadcsb Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2025, Functionality: fully functional, grinding width: 1,300 mm, grinding height: 160 mm, height adjustment type: electric, grinding belt length: 2,150 mm, Heesemann JSM 1350 RC Surface grinding machine Built in 2025, new machine, currently the only exhibition machine in Europe! - Electric height adjustment via terminal: 3 - 160 mm - Continuous feed: 3 - 12 m/min - Sanding units with separate motors and continuously variable sanding belt speeds up to 18 m/s - Table extensions at the infeed and outfeed - 15.6" industrial PC - Program memory for 100 programs - Remote maintenance - Contact roller unit with steel roller Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Front calibration deflection roller Ø 160 mm, rubberized (65° Shore hardness), grooved - Energy Management System EMS - Doors with glass inserts Felrhadswcqr Ascjgb - LED lighting inside the machine - Vacuum table with preparation (drilled holes) for connecting the vacuum blower - Vacuum blower (inside the machine) - Workpiece cleaning with oscillating blower tube - CSD (magnetic pressure bar) The machine is connected and can be inspected on-site by appointment. Please do not hesitate to contact us if you have any questions.

Condition: excellent (used), Edge planer for planing solid wood edgebands or other edges. Original Adler BH-556 Flush Planer Also for flush planing resin pockets, glue overhangs, etc. Drive motor 230V, 1400 watts 16,000 rpm Fgoljwcqmgjrhadcsb Planing width 56mm, also suitable for extremely wide edgebands Dual-blade spindle Connection cable with quick-change plug Extraction connection Adjustable chip removal Dual-blade handle Wood transport crate Spare blades CE mark The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse; see "Other offers from this supplier."

Condition: excellent (used), HOLZ-HER SECTOR 1255 pro panel saw - used - Welded frame with extremely high rigidity, pneumatically adjustable sliding grid, stable locking of the saw carriage at the top and bottom, electrically monitored locking for vertical cutting, foldable plunge lever on the saw unit, retractable riving knife for cutouts, control panel at eye level, digital display on the longitudinal stop, digital display for horizontal cutting, lifting roller transport system, TRK extraction system, dust-tested, year of manufacture 2023 ----- Technical specifications ----- Cutting length: 4,300 mm, Cutting height: 2,200 mm, Trimming height: 2,110 mm, Fgslrhadev I Dqwscob Cutting depth: 60 mm, Saw blade diameter: 250 mm, Motor: 4 kW, Extraction nozzle diameter: 120/100 mm, Compressed air: 6 bar, Space requirement (LxDxH): 5,500x1,600x3,000 mm, Weight: approx. 950 kg Quality information: - Complete basic inspection - Complete basic cleaning - Electrical system checked - Ready for immediate use

Condition: excellent (used), Year of construction: 2019, Technical data will be updated soon. Fjlrhadjwfiadjcegb

Condition: good (used), Functionality: fully functional, Inclined conveyor for round timber and logs with 5 chain strands. Conveyor length approx. 2.70 m. Width approx. 6.15 m. Fgolswcp Snorhadcjb Chain spacing 1.40 - 1.0 - 1.60 - 2.0 m Increasing from 0.70 to 1.90 m. Chains with flighting. Shaft 70 mm. Driven by a 3.7 kW geared brake motor. Can be demonstrated.

Condition: excellent (used), Year of construction: 2015, F45 2015 Sliding Table Saw F45 ElmoDrive Eye-level operation Fgslrhaswcpuvedcjb Template holder Max. blade diameter 450 mm Motor 5.5 kW (7.5 HP) VARIO 3-axis scoring unit with tilting Double-sliding table with a carriage length of 3000 mm TPL 840 mm CNC angle stop UNO 90 CNC parallel stop 1000 mm Collet set (2 pcs.)

Condition: used, knife: Reversible blade Z2 flight circle (ø): 125 mm drilling: 40 mm Fgslrhaswcpxujdcjb length: 240 mm material: steel

Condition: excellent (used), Year of construction: 2020, Altendorf - Hebrock K36 edge bander with Airtronic, jointing, corner rounding, and two scrapers. Top-of-the-line features with multi-radius, nesting, and spraying devices, virtually fully equipped. Touchscreen interface with PLC control for easy machine operation. The machine can be quickly switched between the glue pot and Airtronic. The machine has the Airtronic option, but can also be operated with the standard glue pot without restrictions. Edge thickness roller approx. 0.5 - 3 mm Workpiece height approx. 8 - 60 mm Feed rate approx. 7 - 10 m/min (automatic reduction with corner rounding machine and Airtronik) Noise protection hood Extendable workpiece support Extraction connection 80 + 140 mm Units: Release agent spray device, top and bottom Quick-change tank with glue outlet Airtronik air heater unit up to 40 mm Top pressure, electric motor adjustment Infeed guide, manual adjustment with SIKO counter Edge thickness, manual adjustment with SIKO counter Fgelrsv Nwahehadcsb Jointing with Leitz Whispercut diaphragm cutters Gluing unit with automatic edge feed for roll material up to 3 mm Pressure zone with 4 rollers Antistatic coolant spray device, top and bottom Crosscut saw, integrated collection container for Edge trimming units Protective spraying device for sensitive edges Multi-radius milling unit with multi-tool diaphragm cutter, with pneumatic 3-point adjustment between R1, R2, and bevel Corner rounding unit R2, pneumatically adjustable between thin and thick edges The profile rounding unit can also be used with the shelf program, so only the straight edge is rounded and not the corners Multi-radius scraper R1 / R2, pneumatically switchable and retractable Cleaning agent spraying device, top and bottom Glue joint scraper, pneumatically retractable Buffing station, cleaning station Hood lock CE mark Operating instructions A video of the machine in operation can be sent upon request. All indexable inserts of the milling units and scrapers have been replaced or turned, the saws and diaphragm cutters (Whispercut) have been sharpened, and the buffing wheels have been replaced. The machine is therefore ready for immediate use. Only the diaphragm cutters of the radius cutter and corner rounder have not been replaced, but they are still sharp. Original paint, only minor paint damage has been repaired. The machine has approximately 5,400 operating hours (glue pot switched on), but the frequency converters for the milling units and cross-cut saw have only been switched on for approximately 3,800 operating hours. Machine dimensions approx. 5,550 x 1,200 x 1,450 mm (LxWxH), including edge plate. Weight approx. 1,700 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are in our warehouse ready for demonstration; see "Other offers from this supplier."

Condition: new, Minimax ME 35 TR S Holzkraft Edge Banding Machine -Exhibition Machine- This offer is an equipment package. The following items and options are already included in the price: Fgslrhjv Nhhpoadcob - New exhibition machine -

Condition: used, Year of construction: 2007, Functionality: fully functional, cutting height (max.): 75 mm, cutting length (max.): 3,200 mm, power: 11 kW (14.96 HP), saw blade diameter: 300 mm, overall weight: 3,300 kg, total height: 2,000 mm, main saw diameter: 350 mm, space requirement length: 6,000 mm, workpiece length (max.): 3,100 mm, working height: 950 mm, type of motor: three-phase motor, space requirement width: 7,000 mm, The machine is in operation until 04.07.2024 Fgslrhadstw Sy Nscjb

Condition: used, (Customer order) Automatic splitting machine for the production of parquet and slats With three units, total connected load 70 kW Min. strip length approx. 200 mm Max. strip width 40-100 mm Max. thickness 80 mm Feed speed 15-40 mm Fgelrhadjwcn Emjcjb

Condition: excellent (used), Weinig Powermat 500 four-sided planer Working width 230mm Working height 150mm Number of spindles 6 Spindle arrangement: Bottom 5.5kw 8000r.p.m Right 5.5kw 8000r.p.m Left 5.5kw 8000r.p.m Top 5.5kw 8000r.p.m Top 5.5kw8000r.p.m Bottom 5.5kw 8000r.p.m Spindles 5-6 with powerlock tool change system Feed speed regulated by inverter 0-30m/min Pneumatic clamps Fgslrowcnakohadcjb Drive on cardan shafts CE certificate Technical documentation

Condition: used, knife: HW WZ Z144 flight circle (ø): 500 mm drilling: 30 mm Fslswcpnpsrhadcegb width: 3.5/4.8 mm material: steel

Condition: used, Year of construction: 2010, CNC Intorex TMC 3000 Maschining centre 8 (9) axis -Max. working lenghts 3000mm -Max working square 220x220mm -Max. working diameter 450mm (when wood round) -Stroke axis X 3800mm -Stroke axis Y 460mm (plus 230, minus 230) -Stroke axis Z 510mm -Stroke axis Y2 360mm (turning) Felrhaeunk Rmjdcogb -Stroke axis Y3 360mm (milling) -Stroke axis Y4 360mm (sanding) -Stroke axis B (rotary +/- 90°) Power: -Axis A (rotary main motor) 22,2 kw 0-1500 upm -Axis Y2 11kw 1000-4500 upm -Axis Y3 11kw 1000-6000 upm -Axis Y4 2,2 kw 3000 upm max. 24.000 upm -Electrospindle (HSC) 12 kw max. 24.000 upm - Toolchanger 6 positions HSK 63 F - Total installed power 70 kw - Weight approxm. 9,5 tons

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- Fgslrhaev Nhg Sodcsb ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection - new exhibition machine -

Condition: used, Bütfering Sandy E-Line 111 Wide-belt calibration and fine grinding machine Automatic steel contact roller unit CPS electronically controlled segmented sanding shoe unit Fgslrhowcnm Readcob Cleaning brush unit Working width 1100 mm Feed speed 4 + 8 m/min Motor power approx. 15 kW RTE additional compact roller table in the infeed and outfeed Machine is WORKSHOP OVERHAUL and in TOP CONDITION Ex stock in Lieboch

Condition: used, knife: Reversible blade Z4 flight circle (ø): 125 mm drilling: 40 mm length: 230 mm Fgoljwcpimorhadcob material: steel

Condition: used, Holz Her STREAMER 1054 FÜ + PU Edge thickness 0.4 - 6 mm Modern control with selector switch for adjusting the units Pre-milling unit for attaching before the gluing part Fslrswcm Dbshadcjgb Fully automatic edge magazine for rolls and strips Glue application station GLU-JET cartridges + PU gluing Glue application using nozzle technology Workpiece height 6-60 mm Automatic glue height adjustment High-quality 3-roller printing unit, 1st roller motorized Cutting unit pneumatic. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° bevel of the mitre saws pneumatic milling unit, flush milling 6 mm, radius milling - chamfer milling - 15°, pneumatic via control panel scraper unit for chamfers and radii with 2 scraper holders pneumatic engagement and disengagement surface scraper unit - finish spraying device - PU machine is WORKSHOP REFURBISHED in TOP CONDITION

Condition: used, knife: Reversible blade Z4 flight circle (ø): 140 mm drilling: 40 mm Felrhajwcn Ibodcegb length: 230 mm material: steel

Condition: used, Weinig precision setting gauge for adjusting planer heads. mandrel: 40 & 50 mm clamping length: 310 mm Fjlrowcn Hqohadcogb tool flight circles: 80 – 300 mm

Condition: used, knife: WP Z66 Indexable insert: 15x15x2.5 indexable insert: 15x15x2.5 flight circle (ø): 140 mm drilling: 40 mm length: 230 mm material: aluminum Fgjleuackuerhadcjb