Used Masturn 50 Cnc for sale (86,007)

Condition: good (used), Tool trolley with inserts with turning holder for NC lathe, Itedpfx Afexn Tv Ssion Shaft: 50 mm

Condition: like new (used), Year of construction: 2004, Retrofitted: 2025 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Technical features Dimensions Table dimensions: 5600 x 2000 mmMaximum weight on table: 25000 kgNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mmY axis traverse: 3250 mmZ axis traverse: 1000 mmVertical capacity (VC): 450 / 1450 mmDistance between columns: 2700 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Machine weight approximate: 56000 KgMachine dimensions approximate: 13200 x 5425 x 5350 mm Accesories Guarding: 2 sliding doors with a perimetral wire-mesh fenceAutomatic tool changer: OptionalChip conveyor: 1 transversal hinge typeElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sales conditions Guarantee: 6 months mechanical spare partsSale price (Ex Work): On request View all technical features Iedpfx Afju T S Dwoietn

Condition: used, machine/vehicle number: 007826, X axis working area: 5600 mm Y axis working area: 1200 mm Iedpjwgkt Usfx Afietn Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 17 Total number of tool changer positions: 12

Year of construction: 2001, condition: ready for operation (used), A defective Junker CNC crankshaft grinding machine is available. Workpiece diameter range: 35mm-70mm, max. workpiece length: 500mm, grinding wheel diameter: 350mm, bore: 127mm, pad width: 30mm, peripheral speed: 140m/s. Machine dimensions X/Y/Z: approx. 7200mm/3900mm/2700mm, weight: approx. 8000kg, VRF system weight: approx. 5700kg. Including Knoll cooling lubricant system with filter and sludge dryer. Documentation available. On-site inspection is possible. Itodpfx Afowxfa Tsien

Condition: excellent (used), CNC Machining Centre for Routing, Drilling, and Edgebanding of Straight and Curved Panels 4-Axis Electrospindle – HSK F63 Automatic Tool Changer with 12 Positions Boring Unit Edgebanding Unit Itjdpfx Aolpf E Uefisn Edge Storage with 3 Positions Vacuum Pump

Condition: new, Year of construction: 2025, center height: 160,200,250 mm, workpiece weight (max.): 750 kg, grinding length: 100,020,003,000 mm, grinding wheel diameter: 500,600 mm, total width: 2,000 mm, total length: 6,000 mm, total height: 2,000 mm, grinding diameter: 320,400,500 mm, quill stroke: 50 mm, spindle speed (max.): 560 rpm, spindle speed (min.): 1 rpm, grinding spindle speed: 1,400 rpm, warranty duration: 24 months, Equipment: rotational speed infinitely variable, Main technical data : Swing diameter mm 320,400,500 Distance between centres mm 1000,1500,2000,3000 Standard wheel size (diameter x width x bore) mm 500 x 200 x80 Maximum wheel width mm 100 Peripheral wheel speed m/sec 45 Wheelhead swivel (°) +10/- 30 Workhead swivel (°) 90 Tabel swivel (°) 0 Workhead spindle speed, infinitely variable RPM 2-500 Workhead sleeve taper bore Morse 5 Tailstock sleeve taper bore Morse 5 Minimum programmable increment : in axis X /related to diameter./ (grinding wheelhead) mm 0,001 in axis Z (table) mm 0,005 Maximum weight of workpiece Workhead motor kW 2.5 Wheelhead motor kW 11 Total power demand of machine kW 45 - between centres kg 500 Weight of machine with standard accessories kg approx 10000 Dimensions of machine approx. mm 8 000x 2 980 x 2 200 Itjdpfxjpy A Iuo Afien

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) Isdpfexpqy Dsx Afietn - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: ready for operation (used), total height: 2,300 mm, total length: 2,100 mm, total width: 2,400 mm, empty load weight: 6,500 kg, Tos FGS 50/63 X:1400 - Y:630 - Z:500 mm Max longitudinal travel X-axe: 1400 mm Max cross-travel Y-axe: 630 mm Itjdpoxpgihsfx Afion Max travel Z-axe: 500 mm Power on spindle: 15 kW Admission in millinghead: ISO 50 Spindlespeeds: 18 / 8 - 2000 rpm Table size: 1800 x 630 mm Power needed: 380 V

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 2815 mm Measurements depth 4325 mm Measurements height 2450 mm Ijdpfx Asxn U Atsfistn Machine weight 4010 kg Control Unit Brand SIEMENS Model 810 D Main Drive Number of axis 5 Movement X-Axis Movement 500 Y-Axis Movement 450 Z-Axis Movement 400 Table Outer length 630 mm Outer width 500 mm Table load 200 kg Additional Equipment No. of Tools: 16 This 5-axis DMG DECKEL MAHO DMU 50 eco was manufactured in 2011, offering advanced CNC milling capabilities. Ideal for complex geometries and precision parts, this machine represents a significant asset for enhancing production efficiency. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2002, Parts shown by hand not come. Technical details are shown on piucture. Isdpfxswb Dxgj Afiotn

Condition: excellent (used), Year of construction: 2008, Type: CNC Lathe - horizontal Manufacturer: Tsugami Type: M50SYE-III Year of manufacture: approx. 2008 Control: Fanuc 18i-TB Serial number: 5078 Hours: Control on: 94,600 h / Automatic time: 59,000 h / Feed time: 17,600 h Accessories: Standard, jaw chuck, chip conveyor, driven and rigid holders, documentation Machine condition: very good Control system: Fanuc 18i-TB Number of simultaneous axes: 5 (C, X, Z, Y, & A) Number of simultaneous axes according to export control: 4 (X, Z, Y & C) Linear axes: 3 (X, Z & Y) Rotary axes: 1 (C) Parallel axes: 1 (A) Accuracy / repeatability X, Z & Y: 0.03 / 0.02 mm X-axis travel: 170 [mm] Z-axis travel: 400 [mm] Travel distance A-axis: 520 [mm] Y-axis travel: +/- 50 [mm] Diameter of the spindle passage: 51 [mm] Max. spindle speed: 6000 [rpm] Indexing accuracy C-axis: 0.001 [°] Spindle power: 7.5 / 11 [kW] Max. Counter spindle speed: 6000 [rpm] Indexing accuracy C-axis counter spindle: 0.001 [°] Counter spindle power: 7.5 / 11 [kW] [kW] Number of turret stations: 12 (all driven) Accessories: Standard, chip conveyor with pump, collet chuck counter spindle, large holder package incl. driven holders & documentation Itjdpevccxiefx Afion

Condition: used, Year of construction: 1997, Immediately available from training workshop: Iodpfoxn Rzlex Afistn CNC 5-axis milling machine Deckel Maho Type DMU 50 T Year of manufacture: 1997 Control: MillPlus SK 40 Spindle speeds: 20 – 9,000 rpm Travels X/Y/Z: 500/400/400 mm Table: Swivel rotary table 700 x 500 mm Manually tiltable B 105 (–10/+95 degrees) Manually rotatable 360 degrees Max. table load 200 kg Tool changer with 16 positions Max. feeds 10,000 mm/min Rapid traverse 12 m/min Drive 17 kW Weight 3 t Extensive accessories: hydraulic vice, tool holders, milling cutters Price: EUR 7,500.—plus VAT ex location

Condition: used, Year of construction: 2000, max. turning diameter 580 mm turning length 1500 mm control OSP 7000 L greates pass round over bed 610 mm Itsdexmaf Rspfx Afijn swing diameter over slide rest 580 mm turning speed range - main spindle 12 - 2.800 min/-1 spindle bearing diameter 150 mm spindle bore 110 mm spindle nose JIS A2-11 power capacity - main spindel 37 (30) kW C-Axis 0,001 ° x-axis 598 mm y-axis 230 mm z-axis 1.660 mm rapid traverse X / Y: 12.000 mm/min rapid traverse Z: 20.000 mm/min rapid traverse C: 100 min/-1 cutting feed speed X / Z / Y: 0,001 - 1.000 mm/U type H2 ATC number of toolpositions 2 (1x L-Tool / 1x M-Tool) pos. driven statition stufenlos / stepless Spindle speed - driven tool stations 40 - 3.000 min -1 tool shank height 25 mm Boring bar shank diameter 50 mm diameter of quill 120 mm quill stroke 170 mm taper of center MT 5 number of toolpositions 50 pos. tool taper MAS BT 50 max. tool diameter 170 mm max. tool length 350 mm max. tool weight 20 kg drive of magazin 3,2 kW total power requirement 53 kVA weight of the machine ca. 18,5 t dimensions of the machine ca. 6,0 x 3,2 x 3,0 m CNC - Turning- and MillingCenter OKUMA - MacTurn 50

Condition: ready for operation (used), controller manufacturer: Heidenhain 3 axes, total length: 2,900 mm, total width: 1,690 mm, empty load weight: 5,000 kg, horizontaal en verticaal frezen positieverandering van het hoofd gebeurt handmatig boorcapaciteit (100 mm) max. werkstukhoogte: 648 mm 3 assen gelijktijdig Bekijk de video onder de miniaturen om de beweging van de machine te zien. Max longitudinal travel X-axe: 1100 mm Max cross-travel Y-axe: 600 mm Max travel Z-axe: 500 mm Max height workpiece: 648 mm Power on spindle: 9,5 kW Max quill travel Z': 100 mm Admission in boring head (ISO): ISO 40 Spindlespeeds: 3000 rpm Table size: 1600 x 600 mm Itsdoxpgi Uepfx Afijn

Year of construction: 1990, condition: good (used), HEIDENHAIN TNC-355 Working travels 850x500x450mm Table size 1250x500mm Iedofg Ep Dopfx Afietn Spindle taper 50 Spindle speeds 35,5-1800 rpm Misc.accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2004, operating hours: 66,000 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, table load: 200 kg, overall weight: 6,500 kg, spindle speed (max.): 18,000 rpm, Equipment: rotational speed infinitely variable, For sale is a CNC milling machine from the brand Deckel Maho, model DMU 50 eVolution. The machine is in good condition and fully operational. History: 2022: Spindle rebalanced, new rotary union and gear ring Geometry newly adjusted Technical data: Year of manufacture: 2004 Itjdpfx Afjwvuzzsijn Control: Sinumerik 840 D Powerline X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm B-axis: 0-180° C-axis: 360° Power-on hours: 66,000 h Operating hours: 31,000 h Table dimensions: Ø 500 mm Max. table load: 200 kg Max. spindle speed: 18,000 rpm Spindle taper: SK 40 Rapid traverse X/Y/Z: max. 50 m/min Tool magazine: 60 positions Space requirements: 4,700 x 5,400 x 2,600 mm Weight: approx. 6,500 kg Special equipment: - High-pressure coolant system - Band filter system - Chip conveyor - Automation flap, right side - Digital 3D touch probe - Blum laser measuring system Transport and loading can be organized Europe-wide on request and at an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For further information or contact options, please visit our website.

Condition: used, length: 2750width: 1100heigth: 2050weight approx.: 3500pressure: 50bending length: 2550 CNC Bending Press 3 Axes Y1, Y2, and Z Hydraulic Tool Clamping for the Upper Tool Darley System Technical Details: Machine Type: EHP 50.25/20 Max. Pressing Force: 500 kN Ijdpfowiatpox Afiotn Bending Length: 2550 mm Downward Speed: 100 mm/s Max. Pressing Speed: 13.5 mm/s Return Speed: 75 mm/s Stroke Length: 120 mm Cylinders: 2 pcs Motor Power: 5.5 kW Oil Tank: 100 Liters

Condition: not inspected (used), JAFO FYN 50 NB – CNC Vertical Milling Machine For sale is a CNC vertical milling machine from JAFO, model FYN 50 NB, year of manufacture 1988. The machine is fully operational and ideal for precise milling operations on workpieces up to 700 kg including clamping device. ⸻ Technical Data • Travel (X/Y/Z): 800 × 500 × 500 mm • Table working area: 500 × 1,400 mm • Number of T-slots: 7 • Slot width: 18 mm • Slot pitch: 63 mm • Max. longitudinal table travel: 800 mm • Max. vertical knee travel: 500 mm • Max. transverse spindle head travel: 500 mm • Feed rate: stepless 0–4,000 mm/min • Spindle taper: ISO 50 • Head swivel angle: ±45° • Distance spindle axis to vertical guides: max. 590/90 mm • Spindle speed: 56–1,800 rpm • Rapid traverse: 4,000 mm/min • Spindle drive motor power: 5.5 kW • Operating voltage: 380 V, control voltage 24 V • Total power consumption: 10 kW • Dimensions (L×W×H): 2,080 × 1,700 × 2,260 mm • Total weight incl. hydraulic unit: 4.5 t ⸻ Equipment & Features • Vertical, swivelling milling spindle on a transversely adjustable ram • Hydromechanical tool clamping system • Separate feed drives with DC motors and permanent magnets • Power transmission via toothed belt to preloaded ball screws • Automatic lubrication system for spindle drive and guideways • Hydraulic counterweight for the knee • Manual adjustment via electronic handwheel • Heidenhain control at the swivelling control panel, control cabinet mounted on the machine base • Documentation and operating manual included • Additional images and videos available upon request ⸻ The machine is immediately ready for operation. • Inspection possible at any time • Europe-wide transport available ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to modifications and errors. Ijdsxk Tzgopfx Afijtn

Year of construction: 2008, condition: ready for operation (used), Main Drive Number of axis 5 Additional Equipment Central Lubrication Vacuum Supply: 1 vacuum pump (Busch-Mink) Output approx. 250 m3/h 1 unit for manual operation (emergency stop, feed, hood open/close) Protective Fencing Remote Diagnosis Available This 5-axis MKM UNI Portal 50/15 RO was manufactured in 2008, designed for versatile machining of wood, plastics, and light metals. It features a large working area with dimensions of 5000mm x 1500mm, and a clearance height of 200mm. The machine includes a high-performance electric spindle with HSK 63 F connection and a 12-position automatic tool change magazine. Ideal for complex, multi-axis operations. If you are looking to get high-quality milling capabilities consider the MKM UNI Portal 50/15 RO machine we have for sale. Contact us for more information. Application Types CNC Wood Machining Itodpfxoxfctbo Afijn

Condition: good (used), Year of construction: 2006, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, table width: 380 mm, table length: 500 mm, table load: 200 kg, mount diameter: 30 mm, Measuring probe TS640 Tank 600 L with 40 Bar IKZ Extended chip conveyor for 30/60 Tools ATC Direct measuring scales also in B & C Axis Air true spindle over M-Function X - Travel: 500mm Y - Travel: 450mm Z - Travel: 400mm A - Axis: 360° B - Axis: 0 - 108° Table Length: 500mm Table Width: 380mm Isdpfx Afsw Rl Igeijtn Table load: 200 Feed rate X-Axis: 50000mm/min. Feed rate Y-Axis: 50000mm/min. Feed rate Z-Axis: 50000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 35kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 3+2 Chip conveyor: yes Coolantsystem: yes Length: 3800mm Width: 3200mm Height: 2800mm Weight: 6500kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Travels X-axis: 598 mm Y-axis: 230 mm Z-axis: 1,660 mm Main spindle Speed range – main spindle: 12 – 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Drive power – main spindle: 37 (30) kW C-axis: 0.001° Feeds Rapid traverse X / Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 min⁻¹ Cutting feed rate X / Z / Y: 0.001 – 1,000 mm/rev Tool turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) Driven stations: infinitely variable Speed range – driven tool stations: 40 – 3,000 rpm Isdpexb Awfjfx Afiotn Tool shank height: 25 mm Boring bar diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool magazine Number of tool stations: 50 Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Control: OSP 7000 L Space requirements & Weight Approx. footprint: 6.0 x 3.2 x 3.0 m Approx. machine weight: 18.5 t Electrical data Total connected load: 53 kVA Rated voltage: 400 V Number of phases: 3 P Frequency: 50 Hz EQUIPMENT Chip conveyor Central coolant system High-pressure coolant Signal lamp Hydraulic unit Steady rest Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel 44 assorted tool holders

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, total height: 2,380 mm, total length: 1,450 mm, total width: 17,600 mm, table width: 480 mm, table length: 800 mm, overall weight: 3,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 8,000 rpm, A DMU brand and type 50 V milling center is for sale A new spindle was recently installed. The machine is in very good condition and fully operational, machining in the 100el range is possible without any problems Technical data: Brand GRUNDIG Model MillPlus Spindle speed range: 20 - 8000 Number of axes: 3 X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 380 mm Outer length of table: 800 mm Outer width of table: 480 mm Spindle holder: SK40 Dimensions L*W*H: 2450*1760+2380 mm Weight: 3500 kg On request, loading and transport (Europe-wide) can be organized for an extra charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Iodpfx Aferdf Eboietn For further information or contact options, please visit our website

Condition: new, Year of construction: 2024, functionality: fully functional, - Swiveling control panel - CNC control SIEMENS 828D - Motor for horizontal and vertical spindle - Feed motors with inverter - Ball screws for X/Y/Z axes - Automatic 2-stage gear box for spindle speeds - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Pneumatic hydraulic clamping system for the vertical spindle - Spindle protection with safety switch - Protective cover in the work area with electrically secured doors - Counterholder for horizontal milling - LED work light - Automatic central lubrication system - Safety handwheels for X/Y/Z axes - Coolant system with chip tray - Guideway covers - Base plates and adjusting screws - Operating tools - Technical documentation - CE version Itsdevupa Ropfx Afisn - Colors: * RAL 7024 - Graphite gray * RAL 7035 - Light gray Technical data: Fixed angle table: - Dimensions of the work surface: 1,000 x 500 mm - T-slots: Number / width x distance: 8 pieces / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 1,200 x 250 mm - T-slots: Number / width x distance: 3 pieces / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 600 mm - Transverse (Y): 500 mm - Vertical (Z): 400 mm Feed rates: - Control: stepless - Range (X,Y,Z): 0 – 2,000 mm/min. - Rapid traverse - X,Y,Z axes: 5,000 mm/min. - Rapid traverse - Z axis: 4,000 mm/min. Horizontal spindle: - Tool holder: DIN 2080 / ISO 40 - Speed range (2 levels): 0 – 3,200 rpm. Vertical milling head: - Tool holder: DIN 69871 / / ISO 40 - Speed range (2 levels automatic): 0 – 3,200 rpm - Head swivel: +- 90° - Distance spindle nose/angle table: min/max.: 70 – 470 mm - Distance spindle center to column: min./max.: 160 / 660 mm Motors: Main drive power: 7.00 kW Feed motor power X-Y-Z: 2.85 KW Dimensions and weight Dimensions (W x D x H): 2,850 x 1,950 x 1,900 mm Weight: 1,950 kg

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm Iedpfxow Iq Uge Afiotn - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: new, pressure: 50bending length: 2040column width: 2040daylight: 590stroke lenght (max.): 300messurements (LxWxH): 3170x1960x2500weight approx.: 4850motor power: 11CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Itodpfxed Etfye Afijn