Condition: ready for operation (used), Year of construction: 1999, Schuko COMPACTO 600S briquette press VACOMAT 200 with chip container, agitator, and discharge screw The ideal chip disposal solution for a small business This extraction system was used to extract approximately five machines. Fgjb Hcjwd Ufiew Imsb The extraction pipes, electric slide valves, etc., are all still in place.

Condition: as good as new (ex-display), Year of construction: 2025, Special price for trade fair machine *Available upon request Combination of: mütek MPP 60 briquetting press + MMJET 350 dust extractor *Approved for indoor installation *Both individual machines are fully manufactured and in stock; they only need to be connected. 1. Technical specifications for the briquetting press: Our best-selling briquetting press, the classic. + Proven, simple technology for extremely low error rates + 25 years of experience, ongoing development, and know-how + Several thousand machines in use with satisfied customers + Excellent price-performance ratio Customs tariff number: 84793010 Briquette diameter: 50 mm Front bushing: 50 mm Maximum briquette stroke: 40 mm Optional briquette stroke: 40 mm Throughput (depending on material): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter . Motor power: 5.5 kW, 400 volts / 50 Hz / 3-phase Floor area of entire system: 2.2 x 1.1 x 2.8 m L x W x H Height - 2.8 m (special container) Delivery also possible in two components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Fgjb Hod Su Hxscw Imsb Pump: 27 liters Hydraulic pre-compressor Cooling option for crimping tongs: no Cooling option for hydraulic oil: yes Fill level monitoring option: yes CE compliant 2. Technical specifications for the MMJET 350 clean air extraction unit: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when standing in front of the dust bin) Residual dust content: 0.1 mg/m³ Max. flow rate: 8000 m³/h Nominal flow rate (20 m/s): 6950 m³/h Filter area: 71 m² Negative pressure: 2630 Pa Automatic filter cleaning Cartridge filter Jet cleaning Powder fire extinguisher installed (inspected every 2 years by a specialist company) Raw material requirements: - The moisture content (dry) must be between a minimum of 6 and a maximum of 18% - Compressed air provided by the customer - Maximum chip length 15 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The customer must select a press large enough to remove more material than is sucked in at peaks. - The feed must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result.

Condition: used, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. Feb Hcwswcaqne Imogb If you have any questions, feel free to contact us! - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: ready for operation (used), Tenoning machine , made by Helma type: 9461 Spindle 30 mm motor 4 Kw /9000 rpm 2 x working places Hydraulic Feb Heud R Aaecw Imogb 2 pressure cylinders from above Hydraulic table top drive

Condition: used, Year of construction: 2017, Horizontal panel saw with rear loading via lifting table and automatic preloading roller conveyor PowerTouch Numerical Control with CADmatic 4.5 PROFESSIONAL Barcode Label Printer ecoPLUS technology for energy saving (up to 20% less) Electrical cabinet air conditioner Cutting length mm 3800 Cutting width mm 2200 Blade projection 80 mm Rear panel loading via automatic lifting table with rear left pre-loading table Lateral aligner integrated into the blade carriage No. 1 fixed front Bakelite table with air curtain system for unloading the panels No. 2 adjustable front bakelite tables with air curtain system for unloading the panels Main blade group 11 kW Engraving group Kw 2.2 Adjustable speed of the blade carriage up to 130 mt\min Pusher wagon with 10 clamps Power Concept system to enable cutting pattern optimization with up to 40% increased productivity TECHNICAL DETAILS TO BE CHECKED Feb Hjwd R Rhocw Imegb

Condition: used, Year of construction: 2003, machine/vehicle number: 92630105, ORMA multi-shelf press Shelf size 2500x1300 mm Number of shelves 4 pcs Steam heating Fsb Hcwjwd Rxrs Imegb

Condition: like new (used), Year of construction: 2022, operating hours: 1,000 h, Functionality: fully functional, Custom-made for wood and plastic processing Planer with a planing width of 650 mm and variable speed control Smooth feed conveyor with variable feed speed Vacuum table can be switched on and off Fjb Hcwjwd N U Es Imjgb

Condition: used, Year of construction: 2018, Functionality: fully functional, saw band length: 5,530 mm, saw band width: 50 mm, cutting speed: 28 mm/min, cutting width (max.): 400 mm, cutting height (max.): 400 mm, power: 15 kW (20.39 HP), net weight: 880 kg, The machine is in good condition and it is working . Fob Howd N Tujcw Imogb

Condition: ready for operation (used), Year of construction: 1981, Functionality: fully functional, working width: 1,000 mm, No reserve price - guaranteed sale to the highest bidder! A complete, fully CNC-controlled planer is for sale. A viewing/training session is available upon purchase prior to disassembly! TECHNICAL DETAILS Costa Planer Number of spindles: 10 Control: CNC Spindle Configuration 1. Spindle horizontal 2. Lifting spindle right vertical 3. Lifting spindle left vertical 4. Lifting spindle horizontal 5. Lifting spindle right vertical 6. Lifting spindle left vertical 7. Lifting spindle top horizontal 8. Lifting spindle bottom horizontal 9. Lifting spindle bottom horizontal 10. Jointer spindle bottom horizontal 1x Canali Band Saw 1x Büttfering Sander Working Width: 1100 mm Number of Units: 3 1x Combination Unit 1x Single Unit 1x Brush Unit Conveyor Technology Stacking Unit Rupa Vacuum Lifter (age: approx. 1.5 years) Cross Conveyor 2x Longitudinal/Cross Conveyors Roller Conveyor with Discharge Roller Conveyor to Büttfering Sanding machine Lifting platform Fgob Hcjwd N Dgew Imsb Maintenance was always carried out at regular intervals and professionally. Previous application: Production of wainscoting and parquet (panels) Reason for sale: New construction Machine available from September 2025!

Year of construction: 2025, Condition: new, Functionality: fully functional, The UMG-119.17 rough log splitting machine is designed to cut 2.5 meter long logs in half. The logs are fed into the machine perpendicular to the direction of movement, which ensures high cutting performance, 20 cuts per minute. Fjb Hcwswd Nu Ee Imjgb

Condition: new, Year of construction: 2024, operating hours: 2 h, Functionality: fully functional, working width: 400 mm, brushing unit diameter: 210 mm, total length: 1,350 mm, total width: 900 mm, total height: 1,540 mm, height adjustment type: mechanical, overall weight: 500 kg, extraction nozzle diameter: 100 mm, workpiece height (max.): 315 mm, workpiece width (max.): 400 mm, usable width: 400 mm, VALMEC Master 400 Aging Machine, Brushing Machine Specification: • condition - new • manufacturer - VAL.MEC • model - Master 400 • working width - 400 mm • max working height - 315 mm • brush diameter - 210 mm • first brush - steel • second brush - tynex • engine power - 2 x 3.0 kW + feed 0.37 kW • engine starting - 0-1 • conveyor speed smoothly regulated by an inverter in the range of 4-12 m / min • possibility of changing the direction of rotation of the rear brush • independently adjustable height of both units • output for sawdust extraction - fi 100 mm • 2024 year of production • weight - 500 kg • complete sets of documents from the manufacturer • overall dimensions 135 x 90 x 154 cm (length x width x height) ) Additional information: • new machine, in factory condition • presented photos show the actual condition of the item for sale Febjuwdb Ej Hcw Imsgb • possibility of switching on and checking the device on site. • price given in the auction does not include VAT

Condition: used, Year of construction: 2009, machine/vehicle number: A0908/7866, working width: 250 mm, KOCH SBD-B Saw-Mill-Drill - Pass-Through Machine The machine has the following functions - loading magazine - 2 units with a formatting saw diameter 400/30 mm Fsb Hcwjwd Rlfe Imogb - 4 milling units with oscillation 4KW 18,000 rpm adjustable pneumatic oscillation - 2 horizontal drilling supports head 7 spindles (2 in the 32 mm module, 5 in the 16 mm module) - 3 vertical drilling supports head 14 spindles (12 in the 32 mm module + 2 extreme angular in the 32 mm module - 3 horizontal drilling supports Y axis 2 heads 16 spindles (14 spindles in the 32 mm module + 2 angular in the 32 mm module + 1 head 8 spindle (7 in the 32 mm module + 1 middle angle 32 mm - Return belt to the operator - Supports for long elements The machine does not have doweling units Dimensions of processed elements L- 350-2500 W- 30-200 Gr- 15-75 Machine configured for processing table elements, sample elements in the attachment

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, travel distance X-axis: 4,970 mm, travel distance Y-axis: 2,120 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 30 m/min, spindle speed (min.): 600 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 12,000 W, number of slots in tool magazine: 24, tool mount: 350 mm, tool weight: 8 g, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Complete machine, with Coral filter system and SCM lifter for sale. The equipment has very little use. Numeric control machining centre, with mobile gantry and fixed worktable for the processing of solid wood and various types of materials: glued laminated timber, plywood, chipboard, MDF, Aluminium etc. Designed using the best three-dimensional solid modelling systems, the structure is composed of a machine bed and a mobile gantry made of electro-welded steel. Component's milling of machine bed are performed on high quality CNC machining centres, with one single positioning operation, in order to guarantee the very best planarity, perpendicularity and precise tolerances. The control unit is a numeric control interfaced with an industrial PC. The CNC solution with PC combines all of the qualities of numeric controls with the user-friendliness typical of personal computers. The PC allows to use the operator interface Maestro cnc, developed by SCM to make machine programming fast and simple even for the less skilled operator. Technical specifications: - drilled and tapped holes spaced 120x120 mm for vacuum connection of jigs and equipment fitting - groove scheme spaced 40 mm for suction cups or rubber gaskets - n. 2 working areas - max. dimension to work in Y direction = 2170 mm TELESOLVE teleservice via internet Mobile console with "eye-M PRO" integrated PC TECPAD - Remote machine control Mobile console with 7" touch-screen color monitor for control and management. PRISMA KT Machining Head The machining head with 5 interpolating axes, fixed directly to the mobile gantry, guarantees maximum strength during routing operations and provides top finishing quality also with high stock removal. Technical specifications: Routing unit with 5 interpolating axes − electro-spindle with HSK 63F quick release tool-holder − Rotation speed 600-20000 rpm − right and left rotation − max power (S1/S6) 11/12 kW (15/16.5 HP) from 9000 rpm − Inverter − C-axis rotation = 640° − B-axis rotation = 270° − C-axis equipped with TTS locking system (Total Torque System – SCM Patent) Fgobowd Nrde Hcw Imjb − "For Life" grease lubrication − liquid cooling with heat exchanger - Automatic dust extraction hood with four positions and ON-OFF by workpiece program. Two 250 (300) m3/h - 50 (60) Hz vacuum pumps Vacuum pump for each half-table. Independent vacuum circuit for each half-table. PRO-SPACE Safety system – full protection of the machining head with anti-ejection strips curtains and bumpers with emergency sensors - Emenency cable in the operator area - rear and side protection along the perimeter Enclosed cable-holder chain MAESTRO ACTIVE Human-Machine interface software (HMI) Maestro active is the new interface software (HMI) which has been unified across all SCM technologies. A single operator can easily and confidently run multiple SCM machines, reducing operator training times and facilitating entry into production. Windows 10 embedded 64 bit operating system Maestro cnc programming software MAESTRO CNC SOFTWARE SUITE – USER INTERFACE AND PROGRAMMING Advanced nesting free-form + Label module for Maestro cnc Rapid 24 - Rear Tool store Circular tool store anchored to the mobile gantry. Max load 96 kg

Condition: excellent (used), Year of construction: 2020, Edge bander Manufacturer: Felder Type: G360-4 Year of manufacture: 2020 Operating hours: approx. 439 h Edge thickness: 0.4 -3 mm Workpiece thickness: 10 - 45 mm Feed: 8 m/min Fjb Hcw Isv A U Upemjgb Total output: 5.5 kW Total length: approx. 3,200 mm Joining unit: Yes Cross-cut saw unit: Yes Flush milling unit: Yes Surface scraper: Yes

Condition: good (used), Year of construction: 1984, Used Killinger wood lathe Model KM 2000 S Year 1984 with KM-300 copying device Center distance 1050 mm Center height 220 mm Spindle mount M 33 Tailstock with MT2 taper quill Tool rest 300 mm 4 speeds: 530-1100-1700-2600 rpm Motor 400V/0.75 kW Length 174 cm Width 50 cm Height 115 cm Fsbowd Nldo Hcw Imogb Weight approx. 110 kg

Condition: used, Year of construction: 2006, POUWELS SEMI-AUTOMATIC STAIR ROUTER LARGE WORK TABLE & VACUUM-MOUNTED PART FIXING Brand: POUWELS Type: DEF 500A Serial No.: 171 Year: 2006 Machine offered as is, with no special work required at this price. But can be reconditioned: contact us. The Pouwels DEF 500 A semi-automatic router was specially designed for staircase manufacturers, but not only. It offers machining freedom, combining digital precision and manual work! MACHINING CAPACITIES: - Vertical or horizontal milling and drilling - Head (arm) rotation: -70/+70° - Lateral grooving or drilling, motor tilt: 0-90° - Chuck speed from 0 to 18,000 rpm - Electric and pneumatic movements, strokes: X axis (length): 4750 mm Y axis (width): 900 mm Z axis (height, thickness): 150 mm Feb Hjlc Hyvecw Imsgb - Adjustment accuracy: 1/10 mm MACHINE COMPOSITION: - Robust, welded frame NSK slide for all axes - Work surface: 6000 x 500 mm Smooth table 6000 x 620 mm with depth stops Two removable grooved aluminum vacuum shelves 200 x 500 mm Set of 4 free-standing suction cups - 4 kW milling/routing electric spindle Variable speed start ER25 tool holder connection Positioning laser and double bit thickness lines - Automatic step device for milling and drilling Depth gauge device on barrels Bit depth adjustment device - Milling stops and manual locks Step width and thickness - Touchscreen control panel Digital angle and depth displays Foot control OTHER FEATURES: - 400V overall power supply. 3-Phase + N+T 50Hz 5G 2.5² cable - Installed power 4.5 kW (6.1 hp) IN 12A Main motor 1.6/4 kW 1 x 2.4 kW vacuum pump - Pneumatic supply 8 Bar - Extraction, 1 x 100 mm diameter closable hood Recommended flow rate: 3000 m3/h Shipping dimensions: 5.30 x 1.20 x h. 1.80 m Estimated total weight: 2250 kg - Overall dimensions: 6000 x 2000 x h. 1800 - Weight: 2300 kg Machine supplied with operating instructions, spare parts list, and diagrams. Please contact us for consumables, accessories, and/or extraction systems. Possibility of supplying some used and new tools: contact us!

Condition: excellent (used), Year of construction: 2017, operating hours: 2,804 h, Functionality: fully functional, machine/vehicle number: 1732.20, Automatic multi-blade circular saw with blade adjustment Max. cutting width: 310 mm Motor voltage: 37 kW / 400 V Chain Protect - contactless monitoring and limiting. Electronic height adjustment of the saw shaft. V-belt drive of the saw shaft with access protection. Saw shaft diameter: 65 mm Fgsb Hcjwd Ndysw Imsb Quickfix system, hydraulic quick clamping for saw blades. With slip-on sleeve for multi-blade cutting. Automatic Blade adjustment for precise saw blade positioning 2 adjustment speeds Profi CutDirect electronic control unit: - PLC control - Color touch panel for entering cutting lists and other parameters - Joystick for adjustable saw axis Freestanding, mobile control panel 3 lasers for economical and optimal wood cutting Frequency-controlled feed (5-35 m/min) Special feed for later integration of an infeed conveyor (top pressure roller/splinter trap) Automatic oil chain lubrication Driven grooved outfeed roller Included: - Sturdy infeed roller conveyor with adjustable stop, - Outfeed roller conveyor - Transfer table - Return roller conveyor - Transfer to the log chipper (stainless steel) Further information about the machine is available upon request.

Condition: good (used), Year of construction: 1991, Functionality: fully functional, cutting length (max.): 2,800 mm, cutting width (max.): 1,000 mm, table length: 2,800 mm, overall weight: 1,100 kg, pivoting range: 45 °, power: 5.5 kW (7.48 HP), Equipment: motor brake, scorer, ALTENDORF panel saw, type F45 with scoring unit and 2800mm sliding table, tilting up to 45° Fob Hcwjwd Naze Imsgb

Condition: ready for operation (used), For turning plates, slices or trays up to 250 mm Ø Machine with vacuum clamping Fsb Hcsrh Hntsw Imogb

Condition: used, Year of construction: 1999, cutting height (max.): 210 mm, cutting width (max.): 460 mm, PNEUMATIC ADJUSTABLE CHAINSAW: Brand: STROMAB Type (Model): PS 600/P Serial No.: 990460 Year: 1999 MAKING CAPACITIES: - Maximum wood cross-section: 210 x 460 mm (thickness x width) - Adjustable arm (pivot): -45 to +40° - Cutting capacity pivoted at 45°: 210 x 325 mm max Feb Hcw Ierx Tatomjgb FEATURES: - CE marked - Pneumatic front arm feed - Lockable disconnect switch, push-button stops - Main power supply: 380V Three-phase 50 Hz - Saw motor power: 7.5 kW (10 hp) IN 16.5 A - Blade speed: 2800 rpm - Saw blade: Ø 590-600 mm Bore: Ø 30 mm, Ø 4.2 mm thick - Table height (working height): 880 mm - Main wooden table: 1100 x 710 mm, with 2 pneumatic pressure gauges - Pneumatic power supply: 6 bar Estimated consumption: 28 nl - Extraction inlet: Ø 150 mm Recommended flow rate: 1350 m3/h, 20 m² Dimensions: 1700 x 1500 x h. 1900 mm Weight: 630 kg Please contact us for the supply of consumables, accessories, and/or extraction systems. Machine offered without any special servicing required

Condition: not inspected (used), Year of construction: 1984, Turning length max. 1200 mm turning Ø max. 250 mm 2 hydraulic scanning supports Fgsb Hsp Dt Twocw Imsb spindle motor 5,5 kW hydraulic motor 2,2 kW

Condition: not inspected (used), Year of construction: 1984, for milling the grooves for shutters Fjb Hcoh Nukfow Imegb working on both sides

Condition: not inspected (used), Working length max. 400 mm Working width max. 150 mm Wood thickness max. 25 mm Hydraulic motor 2,2 kW Fsb Hcwek Tyrwo Imegb 2 milling motors à 2,2 kW Spindle speed 12.000 rpm. Frequency converter 8 kVA, 200 Hz Weight ab. 1200 kg

Condition: ready for operation (used), Year of construction: 1989, Functionality: fully functional, Planing width 630 mm 2-blade shaft Corrugated steel feed roller Fjbsu D Atas Hcw Imjgb Rubber feed roller 2 rollers running along the table Motor 5.5 kW Digital display for height adjustment Feed rate 7 + 14 m/min. Weight approx. 1000 kg

Condition: used, Year of construction: 1994, Functionality: unexamined, planing height: 120 mm, planing width: 230 mm, total height: 1,700 mm, total length: 4,600 mm, overall weight: 3,550 kg, Machine with 6 planing shafts bottom-right-left-top-top-bottom Fgeb Hcwev Dx Eus Imsb Working width max. 230 mm Planing height max. 120 mm Feed speed 5 - 35 m/min.