Condition: ready for operation (used), Year of construction: 2011, Höcker shredder PHSS 40/110 Technical data: Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Dobswfflpe Hdlr Hout Year of construction: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: high-speed shredder shaft with counter comb Remark: The machine is in working condition. It has been checked and tested by us in 28816 Stuhr. You can find the video on our website or YouTube channel. Viewings are possible at any time by appointment. We are also happy to carry out tests with your material on request for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale is ex works, without guarantee or warranty.

Condition: used, knife: Centrolock reversible blade Z2 Duob Hdlswffm Hjr Het flight circle (ø): 93 mm admission: PowerLock HSK length: 240 mm material: steel

Condition: excellent (used), Year of construction: 1989, Planer and Thicknesser FS41 GEA – Casadei Dsbowfflie Hdlr Hsut With slotted hole device, but missing collets The chassis is missing a drawbar Very stable, very good condition Year of manufacture 1989 Planer table: 2040 x 410 mm, thicknessing table: 700 x 410 mm 3 kW, shaft speed 5000 rpm Shaft diameter 120 mm, number of cutters 4, feed rate 8 – 14 m/min Maximum planing height 230 mm Weight 560 kg Table height adjustment, removable dust extractor hood New price was €8,800

Condition: new, Year of construction: 2023, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Standard curved milling protection hood Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Dusb Hdlrsiknp Rj Hot Tool diameter max. lowerable 180 mm

Condition: good (used), Functionality: fully functional, Machine type: Lathe Manufacturer: KEILWERTH Condition: good Offer type: used machine Technical Data: Working size: center height 160 mm largest diameter 320 mm Drive: 0.85 kW 400 V Remark: Genuine German workmanship! Very stable and heavy design! Röhm four-jaw chuck Ø 125 mm, max. working length 800 mm, 4 speeds, Dsbethfife Hdlr Heut various accessories, Spare V-belt in headstock, spindle bore 33 mm Weight: 150 kg The machine is in good condition and ready for immediate use and can be inspected and demonstrated at our premises. We would be pleased if you are interested in our offer. Errors, changes and prior sale reserved.

Condition: new, Year of construction: 2025, operating hours: 8 h, Machine in pre production *planned to be ready appr. end of may 2025 Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Deb Hdoxfwdjlr Heut Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, machine/vehicle number: 006095, X axis working area: 3130 mm Y axis working area: 1250 mm Working Table: Pod and Rail Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 18 Dusb Heiiq Tfjdlr Hjt Total number of tool changer positions: 8

Condition: used, knife: WP Z4 V4 flight circle (ø): 160 mm drilling: 40 mm length: 8-15 mm material: steel Labelling: BG test Deb Hdlrewffk Eo Hout

Condition: excellent (used), Ball bearing thrust ring set - Thrust ring set 1 ball bearing idler bushing size 1, 1 lock washer size 1 Dobjwfd E Uo Hdlr Hjut 1 lock washer size 1 1 thrust ring each size 1: D = 90, 100, 105, 110, 115, 120, 125 mm

Condition: reconditioned (used), Long planing tables made of gray cast iron Simultaneous opening and closing of the planing tables with one-time blocking Robust steel/gray cast iron construction of the machine frame Thicknessing table is raised on 4 threaded spindles that are protected by dust protection bellows Electromotive thicknessing table height adjustment Digital thicknessing table height display Hexal-toothed metal feed roller Rubberized feed roller Automatic star-delta switching Motor brake Dobjv Dun Ej Hdlr Hout Main switch EMERGENCY stop CE Working width max. 530 mm Planing height 3 - 250 mm Table length 2300 mm Swivel range of planing stop 0 - 45 degrees Planing shaft diameter 120 mm Number of knives 4 # Planing shaft speed 5000 rpm Motor power 5.5 kW, 400 V, 50 Hz Feed speed 6 - 12 m/min Dimensions L x W x H = 2400 x 1050 x 1050 mm Weight 980 kg Incl. electrical circuit diagram, etc.

Condition: ready for operation (used), Year of construction: 1998, Table: 520 X 420 mm, Speeds: 4000/6000/7500 rpm, Drive: 1.8 KW, Remark:, with additional horizontal sawing unit (1.5 kW) for, Two-sided machining with roller conveyor and, Debjfu Il Ue Hdlr Hout lateral material guide, everything can be easily dismantled, Weight: 150 kg

Condition: new, Year of construction: 2024, Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, further development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil Djbod Nm Sis Hdlr Hjut * Cooling unit recommended for regular use of more than 4 hours at a time. Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: good (used), Code: 0103 Dob Hdlewfdcter Hsut Brand: LOESER - GERMANY Model: AA-220 Wooden dowel production machine complete with n° 2 dowels

Condition: used, knife: Centrolock reversible blade Z2 flight circle (ø): 93 mm admission: PowerLock HSK length: 100 mm material: steel Dob Hdlrswffkls Hsut

Condition: used, Year of construction: 1994, working width: 510 mm cutter head: Leitz Centrofix number of blades: 4 surface table length: 2200 mm surface fence adjustable: yes maximum workpiece thickness: 220 mm Dobevzbbgj Hdlr Heut height adjustment thickness table: electric read out for thickness table: digital feed speed: 7 / 14m/min infeed roller: steel outfeed roller: rubber pressure beam: devided table roller: yes motor power: 5,5 kW motor brake: yes, automatic suction connection: 160mm machine length: 2200 mm machine width: 1050 mm weight: 1050

Condition: reconditioned (used), Heavy-duty surface planer Solid German engineering Finely planed machine tables, total table length 3000 mm Table adjustment with ball bearings Chip removal system with micrometer gauge Adjustment for hollow and pointed edges with scale display Dressing fence in heavy cast iron design - 45 degree swivel and height adjustable Machine completely rewired Automatic star-delta start Motor protection switch Motor brake Emergency stop switch CE Blade shaft with 4 strip blades Cutter head diameter 120 mm Planing width: 410 mm, Working table length: 3,000 mm, Cutterblock speed: 5,000 rpm, Dsb Hdsvi H Nfjlr Hjut Motor 400 V, 4.0 kW, 50 Hz Weight approx. : 1050 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Year of construction: 2024, Pressing area: 3000 mm x 1800 mm Design: Freestanding Dusb Howfcqiodlr Hst Working area: 1460 mm x 2900 mm Number of manual hydraulic cylinders: 4 Pressing pressure per cylinder: 2000 kg Cylinder stroke: 70 mm Pressure clamps: 1 Machine length: 2900 mm Machine width: 900 mm Machine height: 2000 mm

Condition: excellent (used), Working width [mm] 630 Machine table dimensions [mm] 640x1000 Working height min/max [mm] 3.5/ 230 mm Motor power [kW] 4.5 kW Planing shaft speed [rpm] 4500 Shaft diameter [mm] 120 4 knives [mm] 35x3x640 Feed speed [m/min] 6/ 12 Dusb Hdsuxpuyolr Hot Suction nozzle diameter [mm] 150 Machine table height adjustment with handwheel via 4 steel threaded spindles Steel link pressure feed roller Steel pull-out roller 2 under-table rollers Motor protection switch and undervoltage release Manual star-delta switch Emergency stop switch V-belt NEW Ball bearing NEW Planer blade NEW Dimensions L x W x H approx = 1100 x 1300 x 1300 mm Weight approx. 900 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Year of construction: 2025, table size: 3000mm x 1500mm pressure: -0,85 bar machine length: 3100mm machine width: 1450mm Djb Hdlsmftlysr Hout weight: 480kg

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Djbelc Ewie Hdlr Heut Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: new, Year of construction: 2025, Cutting length: 2500 mm Cutting width at the width stop: 1000 mm Cutting width at the crosscut fence: 1565 mm (telescopic extension up to 2550 mm) Cutting depth: 125 mm Scorer: yes Saw blade height adjustment: hand wheel Pivot adjustment saw blade: hand wheel Width stop adjustment: manual Display saw blade angle: scale Dueb Hdlehpl Ugor Het Cutting height display: - Display width stop: Scale Display cutting ruler: Scala Saw blade diameter: 500mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7 kW Motor brake: yes / automatic Suction connection: 80mm and 120mm machine length: 2900mm Machine width: 1800mm Weight: 800kg

Condition: excellent (used), Year of construction: 1994, Chain chisel / chain cutter with pusher drilling unit a complete lock case can be milled/drilled within 30 seconds no reclamping for the entire process quick change from left to right doors Can also be used as a normal chain cutter 3 motors Motor power 1 x 2.2 kW & 2 x 0.5 kW, 400 V, 50 Hz mortising length 320 mm Grooving depth 150 mm mortising width 6 - 40 mm Door thickness 40 - 80 mm Door width 400 - 1050 mm Weight 192 kg incl. clamping device Oil lubrication device Deb Hdlsul U Iwjr Heut 1 stop drum 2 side stops 1500 mm incl. various spare drill bits including spare chain including all documents

Condition: used, Year of construction: 1986, working width: 510 mm cutter head: Streifenmesser number of blades: 4 surface table length: 2000 mm fence tilting: ja surface table fold up: manuell maxilum thickness planing height: 250 mm height adjustment thickness table: electric read out table height: Scala feed speed: 7 / 14m/min infeed roller: Stahl Dusb Hdlrewfcp Sj Hot outfeed roller: stahl pressure beam: durchgehend table roller: ja motor power: 4 kW motor brake: ja suction connection: 160mm machine legth: 2200 mm machine width: 950 mm weight: 800

Condition: new, Year of construction: 2025, Working width: 408 mm Planer block: Strip knife Number of knives: 3 Planing table length: 1640 mm Planing stop angle adjustable: yes Folding up the planing tables: manual Maximum thickness throughput of the thicknesser: 225 mm Thicknessing table height adjustment: handwheel Planing thickness display: scale Feed speed: 7 m/min Dueb Hdjwfcqcolr Het Infeed roller: steel Outfeed roller: rubber Pressure beam: continuous Table rollers: no Motor power: 3 kW Motor brake: yes, automatic Extraction connection: 100 mm Machine length: 1660 mm Machine width: 870 mm Weight: 260 g

Condition: new, Year of construction: 2025, Carriage length: 3200 mm Cutting width at the width stop: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 125 mm Scorer: yes Saw blade height adjustment: hand wheel Pivot adjustment saw blade: hand wheel Width stop adjustment: manual Display saw blade angle: scale Cutting height display: - Display width stop: Scale Display cutting ruler: Scala Saw blade diameter: 400mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7 kW Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Djbsiv Hdvo Hdlr Hjut Machine width: 2000mm Weight: 900kg