Condition: used, Year of construction: 2002, Nominal flow rate: 3500 m³/h. Motor: 1.5 kW. Baffle area: 2000 x 1000 mm with top and side baffles. Storage location: Nattheim. Duelrgksvviz Re Urot

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Dujlrgk Uevvkbleret Storage location: Nattheim

Condition: used, Storage location: Nattheim Duolrgkovvklqe Urjt

Condition: used, Year of construction: 2002, Drilling capacity: 25 mm, spindle mount: MK 3 Storage location: Nattheim Dolrgjvvi Ausk Ureut

Condition: used, Year of construction: 2005, Max. cutting height: 135 mm Max. cutting length: 430 mm Swiveling: two-sided Saw blade diameter: 350 mm Saw blade bore: 30 mm Machine stand: Yes, with roller tracks on the left and right, each 2500 mm Weight approx.: 120 kg Dimensions: 850 x 850 x 1300 mm Motor power: 3.0 kW Extraction diameter: 95 mm Storage location: Nattheim Dolrgk Uevvkp Asreut

Condition: used, Year of construction: 1995, Sliding carriage: 3000 mm Motor: 5.5 kW Scoring unit Cutting width: 1280 mm Saw blade diameter: max. 300 mm Speed: 4000 rpm Scoring saw blade diameter: max. 100 mm Weight: 715 kg Storage location: Nattheim Duslrgevvknrek Urst

Condition: used, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger jointing length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m continuously variable Consisting of the following system components: - SMB vacuum destacking lengthwise with 2 lifting tables and 2 package roller conveyors, built in 2013 Package dimensions max. 1.20 x 1.20 x 6.00 m 4 suction pads Sicko system Separation and infeed into roller conveyor for scanner feeding, board turner, switch for too moist, too dry, switch for B-quality, marking station or automatic operation - Bidac end-face scanner for cupping detection, built in 2013 - Brookhuis moisture measurement FMI 5 Year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras and new optimization software - Dimter-Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009 and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT finger jointing system with turntable Spezialpack AH 1050, year of manufacture 2005 consisting of: Milling machine · Tipping station · Threading section length 5.0 m · Cyclic press length 6.00 m · Cross-cut saw - SMB stacking machine, year of manufacture 1998, 2.50 - 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m) 8 stacking arms, 8 stacking tongues, manually adjustable electro/hydraulic stop, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package pusher Dslrjvvi Tyegk Urjut Storage location: Customer

Condition: used, Year of construction: 1991, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Measuring system: scale Saw head pivoting: manual Saw feed: manual Extraction: external extraction Saw beam locking: manual Approx. weight: 1200 kg Dimensions: 6300 x 1200 x 2900 mm Motor power: 5.5 kW Storage location: Nattheim Dolrjvvkthogk Ursut

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Deljvvi Scergk Ureut

Condition: used, Year of construction: 2022, Max. cutting width: 4200 mm Max. cutting height: 2200 mm Sawblade diameter: 250 mm Max. processing thickness: 60 mm Sawblade bore: 30 mm Bottom support: Plastic supports Material support: Plastic, gently retracting Small part support: Yes Measuring system: Scale Saw head pivoting: Manual Saw feed: Manual Mounting: Freestanding Extraction: External locking Saw beam: Manual Weight approx.: 1000 kg Dimensions: 5600 x 1700 x 3000 mm Motor power: 4.2 kW Storage location: Supplier Duslsvvktuorgk Urot

Condition: used, Year of construction: 1997, Number of belts: 2-belt Max. working width: 1100 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: Calibration roller Diameter of 1st roller: 150 mm Design of 1st roller: grooved rubber roller 90 degrees Shore Sanding belt length of 1st unit: 1900 mm Sanding belt width of 1st unit: 1120 mm Sanding belt speed of 1st unit: 18 m/sec Drive of unit 1: 11 kW 2nd belt: Sanding unit shoe Sanding shoe of 2nd unit: electronic individual links 45 mm segment width Sanding belt length of 2nd unit: 1900 mm Sanding belt width of 2nd unit: 1120 mm Sanding belt speed 2nd unit: 18 m/sec Drive of 2nd units: shared motor with 1st unit with rigid sanding pad for solid wood and frame sanding. Lacquer sanding possible: No. Fixed feed speed: 5/10 m/min. Control: Hand control panel. Electric/pneumatic belt oscillation: Yes. Table lift: Electric. Table display: Digital. Operating pressure: 6 bar. Machine number: E / 79191. Dimensions: 1930 x 1700 x 1980 mm. Motor power: 12 kW. Extraction diameter: 2 x 150. Storage location: Nattheim. Dslrgksvvkkms Urout

Condition: used, Year of construction: 1995, Storage location: Supplier Duslrgovvi Sisk Urst

Condition: used, Year of construction: 1995, Cutting length: 3300 mm with scoring unit. Motor: 5.0 kW. Speeds: 3200 / 4200 / 5000 rpm. Saw blade diameter: max. 400 mm. Saw blade bore: 30 mm. Weight: approx. 1100 kg. Delrgk Uovvknxsrout Storage location: Supplier.

Condition: used, Year of construction: 2025, *New machine* Electric rotor with milled knife pockets. Rotor length: 600 mm, rotor diameter: 260 mm. Large hopper measuring 600 x 800 mm. Reliable material feeding with hydraulically controlled slide. Sturdy rubber feet to efficiently absorb vibration. Pusher-down clamp for long and large parts. Large 40 x 40 mm knives for optimal material feed. Special clearing knives prevent lateral jamming. Screen perforation from 10 – 40 mm. Control cabinet including electrical control (Siemens PLC) and star-delta start. Very robust gearbox. Hopper opening: 600 x 800 mm. Hopper capacity: 0.6 m³. Rotor working width: 600 mm. Rotor diameter: 252 mm. Drive power: 15 kW. Rotor speed: 90 rpm. Duslrgk Ujvvi Anjrst Storage location: Supplier

Condition: used, Year of construction: 2005, *available from around mid 2025* Unimat 23 E: Working width (with a cutting circle of 140 mm): 20 - 230 mm Working height (with a cutting circle of 163 mm): 8 - 120 mm 1st spindle, lower horizontal spindle: 7.5 kW 2nd spindle, right vertical spindle: 11 kW (together with the left vertical spindle) 3rd spindle, left vertical spindle 4th spindle, upper horizontal spindle: 7.5 kW Spindle diameter each: 50 mm Speed each: 8,000 rpm Feed system: 4 kW Mechanical feed, continuously variable: 5-24 m/min. Work table 2.5 m long (including jointing ruler) Uniplan 23: Max. working width: 230 mm Min. working height: 15 mm / max.: 120 mm Feed: 3 kW Horizontal spindles 5.5 kW each Feed speed, continuously variable: 6 – 36 m/min Spindle speed: 6000 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Max. tool cutting radius: 163 mm Fixed bottom chip removal: 0.5 mm Short parts package for min. wood length: 280 mm Mechanical spindle brakes up to 7.5 kW Braking system for feeds up to 5.5 kW 1st infeed roller with photocell - Spindle speed 7200 rpm, including motor power 7.5 kW - Improved sound insulation of the full safety enclosure. Storage location: Customer Delrgksvvkcie Ursut

Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Storage location: Nattheim Dueljvvkg Iergk Urst

Condition: used, Year of construction: 1988, Planing width: 860 mm, clearance height: 200 mm, minimum clearance height: 3.0 mm, bottom motor: 18.5 kW, top motor: 7.0 / 10.0 kW Duelrgjvvkc Aok Uret Storage location: Nattheim

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Delrgkevvi Spo Urout Storage location: Supplier

Condition: used, Year of construction: 2005, Working area: X=2970 mm / Y=1725 mm Axis travel speeds: X=60, Y=45, Z=25 m/min Weight: 3200 kg Dujlevvi Svergk Urst Storage location: Supplier

Condition: used, Year of construction: 2007, Travel: X=4400 Y= 2195 Z=440 mm Working area in X= 3650 mm Y=1560 mm Passage: 330 mm Electrospindle SCM Power 2000 High Speed milling spindle with 13 kW power Vector rotation axis (C-axis) Cleaning fan for tools on the milling unit Tool holder HSK 63 F Speed 600 - 24,000 rpm continuously via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 places) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop on the table sides Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office Hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Dujlrevvi S Ajgk Uret Storage location: Supplier

Condition: used, Year of construction: 2013, Table milling machine with fixed spindle TF135 EP CLASS MAIN FEATURES "FLEX" MILLING STOP: INSTANTLY IN THE RIGHT POSITION "FAST" TABLE: THE BEST SUPPORT FOR THE WORKPIECE Technical data TF 135 EP CLASS Work table dimensions [mm] 1200x730 Milling spindle clamping length (C.E.) Diam. 30-35 (40-50) [mm] 140 (140) Spindle base projection from the table [mm] 52 Spindle base projection from the table with interchangeable spindle [mm] 92 Max. tool diameter under the table with table rings (with "Fast" table insert) [mm] (300x85) Milling stop with electronic programming (positioning relative to the spindle axis) [mm] 250 (from -125 to +125) External diameter of the extraction nozzle on the cutting guard [mm] 1x120 External diameter of the extraction nozzle on the base [mm] 1x120 Extraction speed [m/sec] 20 Extraction volume [m3/h] 1700 Controls/Functions - "Easy" electronic control - Electronic control of 4 to 7 axes selectable via numeric keypad and display on 7" color LCD screen in 16:9 format. - 300 Program locations - Spindle height adjustment via "Easy" control - "Flex" milling stop with automatic adjustment via "Easy" control - Additional module for "EASY" electronic control for programming the entire stop in relation to the tool diameter and the inlet stop for the desired chip removal. - Aluminum stop jaws with connecting bars - Swiveling device for the "FLEX" stop away from the work table - Max. tool diameter 250 mm - Aluminum stop jaws instead of wooden stop jaws with connecting bars for continuous support - "FAST" table insert instead of table rings for the largest possible support surface, manually adjustable - Spindle speeds 3000/4500/6000/7000/10000 rpm - Electrical speed display (version CE and with electrical protection devices) - Electrical preparation for feed device (C.E. version) - Reversible rotation direction with electrical blocking when switching Safety/Protection - Milling guard for working on the thrust ring (max. tool diameter 160mm) - C.E. emergency stop button - Micro-circuit breaker on the spindle lock (CE version) - Safety sensors for tool changes - Electro-pneumatic spindle lock - Micro-circuit breaker on the motor compartment cover - Lockable main switch - Thermal protection switch - 110V auxiliary circuit - Automatic motor brake (CE version) - Mechanical motor brake on the main motor (version with electrical protection devices) - CE declaration of conformity (CE version) Devices - Motor power 5.5kW 7.5HP 50Hz (6.6kW 9HP 60Hz) - Automatic star/delta start TF135 EP CLASS - Spindle moulder in C.E. Version 1 pc. Volt 400 EU 1 pc. Frequency 50 Hz 1 pc. Manual device for the feed support 1 pc. Height adjustment according to the workpiece thickness with mechanical digital display, and horizontal adjustment according to the tool diameter. Thanks to the control panel column, this device allows the feed to be pivoted away from the work table. Version "TL" PRO-10 for tenoning/slotting and profiling 1 pc. Complete with: - Tenoning slide on THK recirculating ball bearing guide. Can be quickly pivoted away from the work table - Pivoting telescopic stop (+45°/-45°) with respect to the feed direction - Adjustable telescopic stop with 4 positionable stops for programming the workpiece length - Side table extensions (total length 2500 mm) complete with extendable support rail for wide workpieces - Eccentric clamping device - Splinter wood on the longitudinal stop with stop point - Tenon Duslrjvvkurjgk Urot

Condition: used, Year of construction: 1985, Weight: approx. 3000 kg Dimensions: approx. 3700 x 2000 x 1600 mm Duolrevvi Ttogk Urjt Storage location: Supplier

Condition: used, Year of construction: 2013, Number of drill spindles: 21 Pitch: 32 mm Drill bit holder: 10 mm drill shank with extraction funnel Operation: Foot pedal Drilling direction: From below and from the front Swiveling: Manual Swivel angle: 0 and 90 degrees Number of material clamps: 3 Type of material clamping: Pneumatic Design: Stationary Stop system: Hole/construction line Miter stop: Yes Machine number: 079789 Approx. weight: 400 kg Motor power: 1.5 kW Extraction diameter: 120 mm 5 mm hole line drills with various dowel hole drills Storage location: Nattheim Duslrgk Uevvi Dfjrst

Condition: used, Year of construction: 2016, POWER UNIT 350+ P-ZRS 1 piece 400 V, NW 355, nominal volume flow 7127 m³/h according to GS-HO-07, max. volume flow 10000 m³/h, compressed air cleaning, pre-separator, integrated automatic extinguishing system, installation with hopper and substructure 960 mm rotary valve for pressure-free discharge into a transport pipe or other disposal facility, power unit for 3 kW transport fan APU 140-350 Option 8ME&8S External 1 piece machine detection for up to 8 processing machines via converter coils or potential-free contact and automatic slide control for up to 8 electro-pneumatic or motor-driven gate valves in 24 V; external junction box for independent wall mounting fill level indicator via ultrasonic sensor 1 x Alko Power Unit 140-300 [sensor and housing] flashing lamp fault indicator 1 x fill level limit indicator (Retonovio) 24 V DC 1 x inclined tube auger for mounting on APU 350 P rotary valve ZRS 960 1 x consisting of: 1 x receiving hopper dimensions 1,500 x 140 x 280 mm primed, painted with plastic lining 1 x metal bend 45° 3.5 m metal combination pipe 4 x metal pipe couplings 5.6 m conveyor spiral 1 x drive unit 45° with 200 mm outlet including maintenance opening, overfill sensor shearing, drive shaft and grounding belt 1 x spur gear motor 400 V / 0.75 KW / 197 rpm. With special shaft and reinforced bearings. TW bimetallic switch "normally closed". 1 x pipe 500 mm long, DN 200 mm, galvanized. 1 x clamping ring for pipe construction, 2 mm, DN 200 mm. Note: Flow rate is 1.5 m³/h. Chipper - specification for friction-free operation: perforated screen less than or equal to 15/20 mm. Additional charge for capacity increase to 10,000 m³/h. Item No. ER-M-161432. 1.00 pc. as described above in the machine description. Storage location: Nattheim Dslrgk Usvviyaorjut

Condition: used, Pivoting unit, chain width 10 mm Storage location: Supplier Delsvvku Esrgk Ureut