Edge banding machine

OTT Tornado

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical specifications: - Round tank glue application unit - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for front/end trimming - Top/bottom milling units: 2 milling units with copy wheels for radius or chamfer - Radius scraper: pneumatically controlled, for post-processing radii - Surface scraper: for smoothing the edge surfaces - Buffing unit: 2 buffing wheels with motors for final finishing - Riepe spraying device - Control: PLC with operator panel - Feed frequency inverter replaced by Ott in 2022 Hnedpfx Ahexdpm So Njg - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120x840x1385 mm Machine weight: approx. 3,000 kg Availability: Short notice Location: Bavaria

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 Hsdpfx Ahjw I H Rkj Nsng With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, OTT Tornado Top Edge Banding Machine in Excellent Condition PU glue pot with release agent, also suitable for EVA adhesives. We had the entire machine recalibrated in September 2024. The glue unit was replaced. The results are perfect with transparent adhesive and incredible with white panels using white adhesive. The machine runs perfectly and without any problems. Technical specifications: Edge thickness: 0.4 - 8 mm Panel thickness: 8 - 40 mm Minimum panel length: 150 mm Minimum panel width: 70 mm Feed speed: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm Cross-cutting unit: with 2 HF motors, 0.3 kW, 12,000 rpm Hnjdpfxev Sm Hcj Ah Njg Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner rounding unit Scraper blade Buffing unit Triple spraying Total power: 17.5 kW Dimensions: Length: 6180 mm Width: 1770 mm mm Weight: 3100 kg - Available immediately -

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, feed length X-axis: 4,300 mm, feed length Y-axis: 4,300 mm, cutting length (max.): 4,300 mm, cutting height with scoring (max.): 4,300 mm, saw blade diameter: 380 mm, HPP 380/43/43, fully automatec loading with TBP 200/31/22/ Main motor 18.5 kW Machine works perffectly, possible test run Holzma Profi HPP 380 Cutting length: 4,300 mm Cutting width (program-controlled pusher travel): 4,250 mm Air cushion table: 2,160 x 650 mm, 3 pcs. + 1* 2,810 mm length Central blower: 1 unit with increased blower performance 2 additional alignment devices Hnjdpfx Asxvz T Ioh Nsg Technical Data: Saw blade projection: 95 mm Saw carriage feed: forwards 1–130 m/min, backwards constant 130 m/min Main saw motor: 18 kW Scoring saw motor: 2.2 kW, VVSH aggregate, program-controlled, vertically rising Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating for main saw motor 18 kW: 24 kW Power Control CADmatic 4.0 control with 17-inch flat display Labeling with part graphics / label program / label printer PICA 104

Condition: used, Year of construction: 2014, Power Control PC 22 with WoodWop software - POWERTOUCH Panel height mm 8 - 60 Pvc/Abs mm 3 Feed speed up to mt/min 25 (with rounding 20 mt\min) Working height electronically adjustable by N.C. Motorized rubberized belt with upper pressure Panel support guide and easy introduction for small panels Controlled infeed guide Anti-adhesive group Rectifying group with two KW 3 motors each, 9000 RPM Reel magazine Gluing group for PUR glue with pre-melter and glue tank Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C. End trimming unit with 2 motors (automatic tilt adjustment?) Overlapping trimming unit with 2 motors Rounding unit with 2 multifunction motors (cornering unit + rounding unit) with NC adjustment Edge scraping unit Glue scraping unit Brushing unit Anti-stick unit TECHNICAL DETAILS TO BE CHECKED Hsdpfxjvqbh Eo Ah Neng

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system Hnodpfec Tmygjx Ah Nog glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, BRANDT highflex 1440 edge bander well equipped, Initial milling cutters glue application pneumatic preliminary guillotine pressure rollers finished cutting saws top-bottom milling unit 2 x finishing unit Hjdpfx Ahev H D S Ss Neng profile scraper flat scraper polisher the machine has nc milling cutter control and a pneumatic package max. element height 60mm max. veneer thickness in a roll 3mm max. feed 14m/min the machine is functional, can be tested before purchase

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit Hjdpfx Ahefbr S Rj Neng operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Holz Her Auriga 1308 FÜ + PU Compact design - Edge thickness 0.4 - 8 mm PLC screen control Edge-Control PPC 221 color display Pre-milling unit for edge preparation before the gluing section Fully automatic edge magazine for both coil and strip material Hjdpfx Ahsxrr Uzo Neng Gluing unit GLU JET cartridge + PU bonding - multi-system Adhesive application via nozzle technology Workpiece height 6-65 mm Automatic glue height adjustment Pressure unit 1912-3 pneumatic End trimming unit 1918 pneumatic for coil and strip material up to 8 mm edge thickness With pneumatic adjustment from 0-10° mitre for trimming saws Milling unit for flush trimming 8 mm, corner rounding, bevel trimming at 15° via control panel Profile trimming unit 1832 pneumatic, rounds corners up to 3 mm edge thickness in throughfeed Scraper unit for bevels and radii Flat scraper unit – finish Spraying device – PU Complete set of DIA tools included Machine is WORKSHOP-REFURBISHED in TOP CONDITION Available from stock in Lieboch

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Technical specifications: Main saw blade diameter (mm): 550 Panel cutting with pull-out fence and sliding table 3200 mm: 3200x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extraction port diameter: - on frame: 120 mm - on saw blade guard: 100 mm Main motor power [S6 -40%] Hz50 kW: 7 Scoring blade motor power [S6 -40%] Hz50 kW: 9 Cutting width at rip fence (mm): 1000 Standard equipment and accessories: - Optimizer/processing control app for tablets: SCM Thundercut The app can be downloaded from the App Store or Play Store on tablets compatible with iPadOS or Android. It can be activated using the QR code supplied with the machine. The app enables you to: * Manage the machinery fleet and materials or panel stock * Create and edit projects, import projects from main furniture design software (file format "cpout"), and import cutting lists * Optimize cutting lists by selecting one or more proposals from the app’s integrated optimization software * Properly set up the machine for each cut, thanks to the simple and intuitive graphics of the 3D sequencer that guide the operator through every step * Print barcode labels for marking different parts via Bluetooth with compatible label printers - 10-year warranty on the sliding carriage system - Maximum saw blade diameter: * Up to 450 mm with scoring saw blade mounted * Up to 550 mm without scoring saw blade - eye-S 15" electronic control system including: * 15" touchscreen monitor * Direct control of the following axes in manual, semi-automatic, automatic, and incremental modes: - Main saw blade height adjustment - Saw unit tilt adjustment - Rip fence adjustment - Scoring blade height and lateral adjustment (the scorer is automatically raised to the set position when switched on and lowered when switched off) * Operator assistance functions for complex cutting operations Hnjdexavrgopfx Ah Nsg * Storage capability for up to 1000 programs with corresponding images * Storage for up to 1000 different tools with corresponding images * Cutting sequence management for preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic acquisition of working dimensions from the Thundercut App * USB port * Prepared for network connection - Auxiliary function of the electronic control system, including: * Determination of the correct stop position on the longitudinal fence for panel machining with tilted saw blade * Determination of the correct stop position on the longitudinal fence for angle cuts with the mitre fence on the work table with or without tilted saw blade - Swivelling control panel above table