Used Horizontal machining centers with shuttle table (wood) for sale (201)

Condition: used, Year of construction: 2004, number of axes: 4, controller model: POWERCONTROL PC85, working width: 1,220 mm, milling spindle speed (max.): 24,000 rpm, working length: 3,250 mm, TECHNICAL DETAILS Working area X-axis: 3,250 mm Working area Y-axis: 1,220 mm Number of working areas: 2 Table system: Pod-and-rail table Number of vacuum pod holders: 6 Number of controlled axes: 4 Number of drilling units: 1 Number of milling spindles: 1 Number of grooving units: 1 Drilling unit Position: top Vertical drilling spindles: 12 Horizontal drilling spindles in X-direction: 4 Horizontal drilling spindles in Y-direction: 2 Total number of drilling spindles: 18 Milling spindle Dsdpfxszmtl Rj Akvswa Position: top Controlled axes: 4 Motor power: 12 kW Speed: 24,000 rpm Cooling: Liquid cooling Tool change: automatic Grooving unit Position: top Design: fixed, for producing grooves in the X-direction Maximum tool diameter: 100 mm Motor power: 2.2 kW Speed: 7,500 rpm Number of tool change stations: 16 Tool magazine on the machining head: 8 slots Tool magazine on the rear of the machine: 8 slots MACHINE DETAILS Control system: POWERCONTROL PC85 Programming software: WOODWOP 5 Main spindle power: 12 kW Total connected power: 22 kW Vacuum pump capacity: 100 m³/h EQUIPMENT CE marking Pod-and-rail work table 6 vacuum pod holders Vacuum pump Automatic tool changer 2 tool magazines, each with 8 slots Protective device for machining units with safety sensors Front safety mats Liquid cooling of the milling spindle The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 7716

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), number of axes: 4, working width: 1,320 mm, milling spindle speed (max.): 24,000 rpm, working length: 2,500 mm, TECHNICAL DETAILS Working area, X-axis: 2,500 mm Working area, Y-axis: 1,320 mm Travel, Y-axis: 1,900 mm Max. panel thickness: 170 mm Work table: Cantilever and rail table Number of controlled axes: 4 Travel speed, X-axis: 80 m/min Travel speed, Y-axis: 80 m/min Travel speed, Z-axis: 20 m/min Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 10 Horizontal drilling spindles, X-direction: 4 Horizontal drilling spindles, Y-direction: 2 Total number of drilling spindles: 16 Milling spindle Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 4 Automatic tool changer: yes Motor power: 13 kW Speed: 24,000 rpm Grooving unit Number of grooving units: 1 Position of grooving unit: top Design: fixed, for grooving in the X-direction Max. tool diameter: 120 mm Motor power: 1.7 kW Speed: 7,500 rpm Number of tool magazines: 2 Tool magazine, rear: 12 slots Djdezmtlkspfx Akvjwa Tool magazine, side: 10 slots Total number of tool change slots: 22 MACHINE DETAILS Machine programming software: BiesseWorks Number of vacuum pumps: 1 Suction capacity per pump: 90 m³/h Total connected load: 17.1 kW EQUIPMENT CE marking Protective structure for machining units with safety sensors Safety system: front safety mats 4 consoles with suction cups for workpiece clamping 1 drilling unit, top 1 milling spindle, top 1 fixed grooving unit, top, for grooves in the X-direction 1 rear tool magazine with 12 slots 1 side tool magazine with 10 slots 1 vacuum pump Front safety mats The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8359

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Working area X: 3330 mm Working area Y: 1340 mm Z-axis workpiece passage: 100 mm Z-axis travel: 250 mm with control unit Electro-spindle with rotating vector axis, 7.5 kW with flange for angular head attachments Drilling heads for vertical drilling: 15 Drilling heads for horizontal drilling X: 4 Drilling heads for horizontal drilling Y: 2 Integrated blade cutter with K2 motor group, horizontal, 2 outlets RAPID tool changer with 6 positions Lateral pick-up tool changer with 1 position Xylog Plus software interface Control panel Vacuum pump, 250 m3/h Dwedpjztft Hefx Akvja Approximate weight: 2800 kg Available November 2026

Condition: new, max. workpiece length 5150 mm profile spindle 1 Stück main drive 16 kW Control Beckhoff CNC Number of axles 5 St. CNC machining center Masterwood Project 385 WL, NEUMASCHINE The all-rounder for Windows, round arches and doors interior Post and beam 5-axis machining of all kinds Detailed description in the adjacent PDF file! HIGHLIGHTS: - Working range: X = 5150 mm; Y = 1500 mm; Z = 200 mm - 1 pc. 5-axis high-performance spindle, 16 kW, double bearing with HSK 63 F recording - fixed drill head with 19 spindles with 7 individually retrievable vertical spindles X-direction with 6 individually retrievable vertical spindles Y-direction with 2 double horizontal spindles X-direction and 1 double horizontal boring spindle in the Y direction Saw unit integrated in drill head - Carousel tool changer with 22 places and 102 mm grid spacing - Carousel tool changer with 16 places and 102 mm grid spacing - linear 4-fold tool magazine - Special clamps for straight window and door parts - special clamps for round window and door elements - 24 pcs. Vacuum clamps for internal installation - Vacuum pump - Chip conveyor belt - extensive design software for interior design, panel processing as well as f. Windows and doors: Masterwork: 2D-Wop for standard application panel processing / interior fitting with Additional function Lamello connection Master 3D Level 2: for more complex edits, optionally also expandable for 5-axis fully interpolating MasterWindow: Integrated window and door design software i.e. Machine does not have to (but of course) with external industry software be controlled. VIDEO shows production of 4 sash parts in one clamping Complete machining including glazing bead production. Corner joint hybrid. Dedpfx Aksd Ih Htjvjwa Of course, all common corner joints on the machine producible. OTHER OPTIONS ON REQUEST! We are also happy to offer you suitable tools for the machine. (Techn.According to the manufacturer - without guarantee!)

Condition: used, Year of construction: 2015, machine/vehicle number: AA1/018167, functionality: fully functional, operating hours: 18,050 h, input voltage: 400 V, input current: 59 A, workpiece length (max.): 3,300 mm, workpiece width (max.): 1,400 mm, workpiece height (max.): 180 mm, number of axes: 5, number of slots in tool magazine: 26, total height: 3,500 mm, total length: 6,000 mm, total width: 3,500 mm, year of last overhaul: 2025, Equipment: documentation/manual, We are offering this used SCM Tech Z5 machining center for sale. Built in 2015, it is a 5-axis CNC machine, currently connected and ready for demonstration. Technical data and features: • Model: SCM Tech Z5 • Type: AA1/018167 Dwedpfoynwu Tjx Akvsa • Year of manufacture: 2015 • Machining area: 3,300 × 1,400 × 180 mm • Axes: 5-axis design • Control / Software: Maestro Version 1.00.022.1034 (3D drawing and milling) • Includes Clemex system • Additional licenses: 1 x 3D dongle, 2 x 2D dongle • Connection: 400 V / 59 A • Vacuum pump: Type Q2EFA132M6C-34 • Tool package with approximately 20 cutters (including DIA cutters, indexable insert cutters, roughing cutters, cove cutters, and rounding cutters). If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2010, max. workpiece length 4500,6000 mm profile spindle 4 Stück main drive 30 kW Weinig Conturex C226 Machining Center ----- For sale on behalf of a client; includes software (Klaes) and tooling (Oertli) for IV68/IV78/IV92 and Wood/Alu 68–92 systems. Machine still is electrically connected. Technical specifications and window cross-sections available upon request! ----- Price of the above-mentioned machine available upon request! ----- Dwodpfx Akszqvnievja Dismantling and reinstallation available upon request! (Technical specifications provided by the manufacturer – subject to change/no liability assumed!) All prices are net, plus statutory VAT.

Condition: good (used), Year of construction: 2020, Masterwood Project 351 L 3-Axis CNC machine Description Aircooled 3-axis milling motor 17,5HP (HSK-63F) Static frequency inverter for programming speed 1.500-24.000 t.p.m. Toolchanger with 22 positions 6 pneumatic countersinkable panel guides for loading/positioning heavy parts Prepared for install. clamps 2 horizontal clamps for beamwood 6 zero points over X-axis (positioning of panels at backside of the supports 8 zero points over X-axis (positioning of panels half-way the supports) Full reference at rightside over Y-axis Full reference at leftside over Y-Axis 2 workingfields 1 x 100m³ vacuumpump 24 vacuumcups Remote control with digital read-out Dodevu U Itspfx Akvjwa Auto tool measuring system Transport waste belt Drill unit with 19 spindles (32mm center distance) 2,2kW - 7 vertical drillspindles in X-direction - 6 vertical drillspindles in Y-direction - 4 horizontal drillspindles in Y-direction - 2 horizontal drillspindles in X-direction (all drill spindles independently programmable) Control unit with PC SINCRO Software CAD/CAM MASTERWORK Technical specifiactions Working range in X - 5.130mm Working range in Y - 1.550mm Speed in X-Y 80 mtr./min. Speed in Z 25 mtr./min. Max. workpiece thickness 200mm Milling motor power 17,5 HP (S1) RPM milling motor 1.500 - 24.000 Drill unit 3HP Toolholdersystem HSK63-F Toolchanger 22 positions Vacuumpump 100m³ Dustextraction 250mm Aircapacity 4.500m³/h Airspeed 30 mtr./sec. Compressed air 7 bar Compressed air consumption 300-500ltr./min. Fuse value 40 Amp. Weigth 7.000kg (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Workpiece thickness: Max. 300 mm including clamping devices Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Liquid-cooled routing spindle, DRIVE5C+ aggregate interface with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters 20 vertical HIGH-SPEED spindles 10 horizontal spindles 1 grooving and parting saw Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ 1 Chain tool changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Additional accessories: ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Dwjdjzqggvspfx Akvoa Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Safety equipment: ----- Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 WoodScout diagnostic system MMR Basic Space requirements (approx. dimensions) ----- ...

Condition: used, Year of construction: 2010, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 44 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, overall weight: 6,700 kg, Equipment: CE marking, Biesse Rover C 6.50 Config. 3 CNC machining centre 5-Axis Description Numerically controlled machining center ROVER C 6.50 Working fields - configuration 3 :X = 4600 mm; Y = 1535 mm; Z = 275 mm CE Safety devices 8 ATS panel supports - L = 152 5 mm - 32 sliding bases Automatic positioning of 8 panel supports and sliding bases (EPS X-Y ) Belt conveyor for the removal of chips and off-cuts Pneumatic locking system divided in 2 work areas in X Dwsdpfxezqdmaj Akvsa 8 rear reference stops with a stroke of 115 mm 8 Stops with a stroke of 140 mm positioned at 1175 mm (L= 12 80 - 1525 - 1800 mm) 4 Side stops with a stroke of 140 mm (2 Lh + 2 Rh) inclusive of the pneumatic system. 4 removable central stops with a stroke of 140 mm (2 Lh + 2 Rh) incl. of the pneumatic system Sensor for the detection of lowered stops Pneumatic system for lifting bar supports with double pneumatic stroke 6 lifting bar supports with double pneumatic stroke (H=74mm)uniclamps Vacuum system for a 250 m3/h pump 1 x 250 m3/h rotary veins vacuum pump for standard vacuum system Composition C3-A1 Operating unit with 5 interpolating axes Prearrangement for the assembly of chip deflectors with pneumatic or inductive sensor on a 5-axes operating unit Composition C3-P2 Chain tool changer with 33 places at 120 mm center distance Iron gripper on chain toolchanger for chip deflector compatible with 5-axes electrospindle RH Chip deflector for 5-axes operating unit Liquid cooling unit for liquid cooled systems Automatic lubrication system Software update from BiesseWorks Basic machine to BiesseWorks Advanced machine CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2008, used CNC machining center Manufacturer: Weeke Type: Venture 1 Dwjdszp E Hljpfx Akvja Year of manufacture: 2008 Machine with console table, 6 supports adjustable in the X-axis, 2 vacuum cups per console, vacuum pump Busch 76 m³/h vacuum connection for templates laser pointer for indicating the position of the vacuum cups Working area X: 200 – 3250 mm Working area Y: 70 – 1050 mm Working area Z: 12 – 100 mm 18 vertical drilling spindles 6 horizontal drilling spindles, 4 of which are in the X-axis and 2 in the Y-axis. Nut saw in X/Y direction, swiveling by 90° Milling spindle 9 kW up to 24000 rpm, with 6-position tool changer at the rear Control system POWERCONTROL PC 85T with TFT 17″, WoodWop 5.0 incl. MDE and production list software Delivery includes only the tools and HSK collets shown in the pictures!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Used 4-axis CNC machining center Manufacturer: Homag Type: BAZ 211 Venture 21L Year of manufacture: 2010 Highlights! - Flex 5+ unit - PowerEdge gluing unit - MPU drilling head - and more Console table with 8 manually adjustable consoles, 2 vacuum cups each, side and end stops, LED position indicator for vacuum cups 6 sets of extraction rails, vacuum connection for templates WORKPIECE PARAMETERS: – Workpiece dimensions / work table: 4175*1550 mm – Workpiece thickness: – Max. 300 mm including clamping devices for milling; with standard clamp max. 60 mm; gluing: max. 40 mm – Up to max. 60 mm with standard clamp SAFETY AND PROTECTION DEVICES: CE compliant; SAFETY GUARD ON THE RIGHT WITH DOOR left and rear: wall mounting! Tooling: 18 kW spindle and 18-position tool changer (turret) + 10-position turret changer, C-axis and interface for Flex5+ unit MPU drilling head with 30 spindles (V20/H10/S360°) (integrated swivel axis 0-185°) Flex5+ sawing/drilling/milling unit Power Edge 360° gluing package with pre-trimming station and 1-roll Blowing nozzle for workpiece edge 2* combined edge/radius milling and pull blade unit Dwodpfx Akjzp Edqevea Tool change station on the right VACUUM PUMP 100/140 m3/h Control: POWERCONTROL PC85 CONTROL PANEL FOR PROGRAM START; WOODWOP Version 6.0 DOCUMENTATION AND CONTROL TEXTS: GERMAN Delivery includes only the tools and HSK chucks shown in the pictures!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,800 h, power: 19 kW (25.83 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 250 mm, workpiece length (max.): 3,300 mm, workpiece width (max.): 1,280 mm, workpiece height (max.): 150 mm, number of axes: 4, number of slots in tool magazine: 41, controller manufacturer: Tpa Srl – Tecnologie e Prodotti per l'Automazione, actuation type: electric, Equipment: USB port, documentation/manual, We offer this very good FORMAT4 PROFIT H200 13.33 machining center. The machine is equipped with 4th axis spindle and max-version drilling head. It only worked about 1800 hours and has some small marks from usage. In the bundle we will provide everything that came with the machine as well as additional suction cups. Dedpfx Aey Dcvvjkvjwa Milling tools and holders are not a part of the deal FOR NOW. Machine is working daily and is an excellent choice for any woodworking company. Type designation: PROFIT H200 13.33 Serial number: 302.07.040.20 Code: 0491 Supply voltage: 400.0 V Phase: 3P+N Frequency: 50/60 Hz Current: 40.0 A Power: 19.0 kW Year of construction: 2020 year Control voltage: 24 VDC Minimum fuse: 47 A Maximum fuse: 64 A Minimum compressed air pressure: 8 bar Air consumption: 350 Nl/min If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2000, BIESSE ROVER 23 Machining Center Dwodpfx Akezrg Uiovoa Description: CNI XNC Control X-axis working range: 2900 mm Y-axis working range: 1300 mm Z-axis working stroke: 140 mm 4th Axis: C-axis Table with 6 movable rails and vacuum cups 1x Vertical electro-spindle (7.8 kW, 24,000 rpm) with automatic tool changer, ISO 30 tool holders 8-position automatic tool changing system – mounted on the operating head Boring head featuring: - 10x Vertical Z-axis spindles - 4x Horizontal X-axis spindles - 2x Horizontal Y-axis spindlesir conditioning system for cooling and cleaning the machine control unit 250 m³/h vacuum pump IN EXCELLENT CONDITION – STILL LOCATED AT THE OWNER'S WORKSHOP Year of manufacture: 2000 (CE certified)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 125 mm, rotational speed (max.): 24,000 rpm, Together with machine goes a lot of tools. Dedjya Aimopfx Akvjwa

Condition: used, Year of construction: 2019, Numerical control with bSolid software The multi-document software application in Windows environment allows the design of the finished product, the definition of its processes, the definition of the work plan, the simulation of the piece machining operations on the 3D model of the machine and generation of the necessary machine programs. bSolid - 3-Axis Machining bSolid - 5-Axis Machining Module for surface machining with 5-axis units and interpolation movements on all 5 available axes (X,Y,Z,C,B). The module includes the following commands: · assignment to surfaces three-dimensional roughing and finishing operations · spread or project a path onto a curved surface machining lying on a plane · follow 2D or 3D curves with any type of tool bSolid - 3D Engraving bSolid - Import external formats Fields of work: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Loadable piece in Y: * 1650 mm, with thickness up to 60 mm on H=74 mm modules * 1600 mm, with thickness over 60 mm on H=74 mm modules. 10 ATS floors – 40 trolleys The code includes: • 2 aluminium bars (n. 1 left and n. 1 right) on which the lateral stops slide. • 10 aluminum worktops. The worktops slide on hardened and ground linear guides using recirculating ball bearing slides. Locking occurs on both linear guides, front and rear, by means of four pneumatic cylinders. The control is activated by a button located in front of the work surface. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system divided into 2 locking zones in X Automatic positioning (EPS) for worktops. "EPS" (Electronic Positioning System) device for the automatic positioning by NC of the work surfaces and trolleys complete with locking devices capable of eliminate possible operator errors. Rear row stop, with 140 mm stroke Intermediate row stop, positioned at 405 mm, with 140 mm stroke. Front row stop, positioned at 1460 mm, with 140 mm stroke 4 lateral stops, with 140 mm stroke (2 right + 2 left) with system 2 additional side stops, with 140 mm stroke (1 right + 1 left). Sensor for checking whether the stops have descended 12 clamping devices for clamping narrow workpieces 6 loading aid bar lifts, for H=74 mm modules Configuration 5A, for Rover B. Configuration for high productivity and flexibility, thanks to the two operating groups 4 and 5 axes and the possibility of performing tool changes in concurrent time. It includes the axes and carriages for the movement of the main operating groups. Includes 2 inverters. Second Y-axis. Introduces the separation of the front and rear Y-carriages, with independent motorization. The two Y-carts have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 connection, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 service. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 service. • Bearings ceramics. • Right and left rotation. • Rotation speed from 1,000 to 24,000 rpm programmable by NC. • The release pneumatic operation is carried out via a prismatic linear guide and recirculating ball bearings. A cover is included for chip extraction, with 6 different positions in Z managed by the NC, depending on the length of the tool, or by program. The suction mouth is automatically closed when the electrospindle is not working. Provision for subsequent installation of the 360° operating group (C-axis) Revolver tool maga... Dedpfjw D E A Eex Akvowa

Condition: used, Year of construction: 2009, Biesse Works Control Working range on X axis mm 3500 Working range on Y axis mm 1585 Working stroke in Z axis mm 350 N ° 2 work fields Bar worktop No. 8 adjustable bars N° 4 pneumatic Bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 4-axis vertical electrospindle (Vektor), with automatic tool change, HSK type cones 10-position rotary tool change system on the operating head 24-position chain tool change system - located on the rear of the chain machine Drilling head with vertical and horizontal spindles composed as follows: n. 12 vertical spindles in X n. 12 vertical spindles in Y n. 6 horizontal spindles in X n. 4 horizontal spindles in Y n. 1 independent blade for making X-grooves Front protection and safety system with carpets Perimeter protection grids Chip evacuation system with motorized belt Air conditioning system for cooling and cleaning of machine control Vacuum pump 250mc/h TECHNICAL DETAILS TO BE CHECKED Dodpfx Akew D Dhaevowa

Condition: used, Year of construction: 2017, Direct Numerical Control NC HOPS with Campus software Working range in X axis mm 3400 Working field in Y axis mm 1600 Working field in Z mm 300 Worktop with 6 adjustable bars No. 3 suction cups each work bar for holding the piece being processed N° 1 5-axis electrospindle, 10 KW, with automatic tool change, Hsk F63 type cones Boring head with 24 spindles as follows: N. 12 Y-axis vertical spindles N. 6 X-axis vertical spindles N. 4 horizontal spindles Y axis N. 2 X-axis horizontal spindles Automatic tool change system with 18 positions - positioned on the back of the machine Frontal protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the switchboard No. 1 vacuum pump Dedowwiybopfx Akvswa

Condition: used, Year of construction: 2004, functionality: fully functional, CNC machining centre Homag Weeke Optimat BHC Venture 3, year 2004 for sale! Dwjdpex Ey H Iofx Akvja

Condition: used, Year of construction: 2006, functionality: fully functional, TECHNICAL DETAILS Components ADVANTAGE C transverse loader: automatic ROTATING DEVICE (flipper): available BIESSE FTT: with 4 heads, drilling and milling, automatic tool change BIESSE FHT: 2 WORKING UNITS horizontal drilling and dowel insertion WANDRES: brush cleaning from top ADVANTAGE SC transverse unloader: automatic Plate dimensions Plate length: 240 - 3,200 mm Single panel width: 140 - 1,550 mm Plate width: 140 - 800 mm Plate thickness: 12 - 60 mm Drilling units Drill heads FTT 800: 2 machining centres with 4 boring units - 5 working tables Vertical spindles (X-direction): 14 independent per head Dwodpfx Aoy Ui Rnskvsa Vertical spindles (Y-direction): 18 independent per head Horizontal spindles (X-direction): 3 independent, with double output Horizontal spindles (Y-direction): 3 independent, with double output Tool change system Revolver cartridges: 2 Positions per cassette: 56 Application: Automatic tool change of the vertical spindle centers on 4 drilling units of the two machining centers A and B. Milling spindles Electro spindle 1: 3.7 kW (5 HP), ISO 30, with inverter and 3-way tool change rack Electro spindle 2: 3.7 kW (5 HP), ISO 30, with inverter and 3-way tool change rack Lateral positioning units Workstations: 2 for parallel processing of identical or mirror-inverted panels left positioning element: fixed for lateral reference Right positioning element: movable in X-direction, on lower supports, linearly guided Adjustment: automatic according to the X-dimension of the panel Drive: Brushless with digital control Function: Detection of the actual X Length in the machining center, automatic correction of the drilling positions Max. travel speed: 120 m/min Loading and unloading Infeed system: 1 belt conveyor with cross feed, single drive Unloading system: 1 belt conveyor with cross feed, single drive Additional: Cleaning fan in the unloading area Drill heads FHT (horizontal): machining centres with 2 working units (1 LH unit / 1 RH unit) - 3 working tables. HORIZONTAL BORING UNITS with 24 independent spindles to be installed onto 2 operating units HORIZONTAL INSERTING UNITS WITH 5+5 GLUE INJECTORS AND 8 mm. DIAMETER DOWEL INSERTERS TOOL-HOLDER ADAPTOR for the quick change spindles of the boring units. GLUE INJECTION AND DOWEL INSERTING UNIT for 8 mm. dia. dowels to be added to the standard ones. The unit is prearranged for the insertion of 8 mm. diameter and 25-35 mm. long dowels.* The 8 mm. diam. dowel inserting units are required. NOTE: Dowel inserting unit was never used and not tested. Not possible to be tested ADVANTAGE C 3200 TRASV. 1 POS - loading ADVANTAGE SC 3200 TRASV. 1 POS - unloading Security features Standards: CE compliant Safety equipment: Extensive protective enclosures

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Working range X: 4200 mm Working range Y: 1550 mm Working range Z: 260 mm 10kW, 5-axis DRIVE5CS electro-spindle, HSK63F connection Number of vertical drilling heads: 12 Number of horizontal drilling heads X: 4 Number of horizontal drilling heads Y: 2 90-degree grooving saw unit 15-position tool changer 8-position tool changer at the rear of the machine Work table with 8 rows of supports Dwedeytyidepfx Akvea Chip conveyor 2 vacuum pumps Power Touch control Software: woodWOP 7.1, WoodWop Office Professional New 5-axis electro-spindle motor (21,645 Euros according to invoice) to be installed on November 27, 2025! Includes suction cups and 8 PowerClamp clamping devices for frames. Available mid-October 2026.

Condition: used, Year of construction: 2016, max. workpiece length 4500 mm profile spindle 1 Stück Dedpjzn Ahwjfx Akvjwa main drive 19,2 kW

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 0-250-08-1590, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 125 mm, controller model: Homatic 2000 IPC, number of spindles: 28, spindle speed (max.): 24,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area X-axis: 200 – 3,250 mm Working area Y-axis: 70 – 1,220 mm Working area Z-axis: 12 – 125 mm (clearance 150 mm) Tool changer positions: 18 Spindles Total number of drilling spindles: 28 Vertical drilling spindles: 22 Horizontal drilling spindles in X-axis: 4 Horizontal drilling spindles in Y-axis: 2 Milling spindle power: 12 kW Milling spindle max. speed: 24,000 rpm C-axis: 360° interpolation MACHINE DETAILS Dwedpfxsznbgrs Akvea Vacuum pump capacity: 100 m³/h Control model: Homatic 2000 IPC Control software: WoodWop 4.5 incl. MDE and production list software FEATURES 4 axes Console table 8 manually adjustable supports in X direction 3 vacuum cups per console Vacuum connection for templates Laser positioning aid for vacuum cups Laser projection for cup positioning Liquid circulation cooling Operator terminal Note: The sale does not include the pictured adapter units, tools, or HSK holders.

Condition: used, Year of construction: 2004, functionality: fully functional, For sale is a HOLZ-HER Eco Master 7120 CNC machining center, suitable for the precise processing of panel materials in the production of furniture and other carpentry products. The machine is located in Labin (Istria, Croatia). Price: 20,000.00 EUR Service and condition: The CNC machine is regularly serviced. The main motors have been replaced. New ceramic bearings have been installed. The machine is part of a production facility for the manufacture of panel furniture and is ready for continued use. Dwedpezp U H Iofx Akvoa If you are interested in purchasing the entire production facility, please contact us. We will be happy to discuss a serious offer. The facility also includes: HOLZ-HER Sprint 1321-2 STUF edge banding machine HOLZ-HER 6110 CUT 70 panel sizing saw Lazzari UNO 3000i circular saw Polymac curved edge banding machine Polymac machine for processing ABS edge banding Busellato drilling machine Table router for creating grooves Overhead router Contact: Damir Verbanac 📞 +385 91 22 55 349 Also available via WhatsApp or Viber.

Condition: good (used), Year of construction: 2008, functionality: fully functional, We offer for sale: WEEKE (Homag drilling systems) – OPTIMAT BHC 200 – High-precision CNC machining center with woodWOP 8! Technical data: • Year of manufacture: 2008 GUIDE SYSTEM AND DRIVE TECHNOLOGY Dwsdpewx Iidefx Akvea • - Dust-proof linear guide system • - Rack and pinion drive in the X-axis and ball screw in the Y- and Z-axis • Travel ranges of the axes: - Y = 1822 mm - Z1 = 300 mm - Z2 = 185 mm • Work table: • X = 5250 mm (length) • Y = 1250 mm (width) • Z = 100 mm (thickness) Optimat BHC200 • Control system: HOMAG PowerControl/woodWOP • Equipment: o Automatic tool changer o Multi-spindle drilling head o Integrated vacuum table for secure clamping o Processing of wood, plastic and light metals possible • Condition: good; very well maintained, regularly serviced / last service 03/25 • Modernization measures of the machine: 10/2022 - New machine computer / Siemens industrial PC - woodWOP 8 / Windows 10 update Advantages of the HOMAG BHC200: • Precise and efficient machining for a wide range of materials • Ideal for carpentry shops, furniture manufacturers and custom-made products • Reliable performance, even for demanding projects Scope of delivery: • Machine + Industrial PC • Operating manual • CE SAFETY AND PROTECTION EQUIPMENT - Protective grille in the side and rear area - Three-part safety mat in the front area allows the placement of workpieces in the non-active working area. Inspection and test run on-site possible and welcome! Dismantling and transport must be arranged by the buyer.

Condition: new, Year of construction: 2022, axis stroke (X,Y,Z) 6735 x 1930 x 245 mm Number of spindle head vertical 0 St. Number of spindles head horizontal 0 St. Number of tools 39 St. Dust suction hood 2x 250 mm Number of milling agregates 2 St. Year 2022 Speed 18.000 / 24.000 U/min. Required air-pressure 7 bar Motor output 16,5 / 19,2 kW Capacity 250 m³/h Dedpfsxf Dwzjx Akvjwa Control BH660