Condition: excellent (used), Year of construction: 2014, AUTOMATIC FINGER JOINT plans for lamellar beams complete with loading belt and automatic unloading rollerway 13 mt length Second hand in good conditions WORKING PROCESS The manufacturing process of the HPX-O Horizontal Automatic Finger Joint consists of seven phases: 1. Two subsequent work pieces are automatically positioned and clamped in horizontal position by two hydraulic clamps 2. The groups holder chariot with 2 cutters and 2 gluing units moves vertically to mill simultaneously rear side of the first piece and the front side of the second 3. Comb nozzles apply glue to the back side of the first piece and the front side of the second. 4. The rear milled piece, blocked on a mobile carriage, advances thanks to two hydraulic cylinders until it joins the piece that precedes it 5. The two hydraulic cylinders complete the thrust and join the two pieces with a pressure of 18 tons. 6. The jointed piece advances automatically via the extraction rollers, while the milling carriage returns to its starting position 7. Two new pieces to be joined position themselves automatically and the cycle starts again. MODEL COMPOSITION HPX-O Horizontal 4m FEEDING BELT Motorized rollers for inserting and positioning the workpiece in the machine. MACHINE STRUCTURE The structure is in electro-welded mechanical carpentry with high resistance and stability. This guarantees the Finger Joint model HPX-O the ability to support the pressure of 18 tons in the jointing phase. PIECE BLOCKING CLAMPS Two hydraulic clamps, one fixed to lock the piece positioned at the entrance and one mobile with an 18-ton thrust to complete the joining operation. MILLING, GLUING AND JOINTING UNIT Integrated unit in the structure of the machine, composed as follows: ELECTRONIC PROGRAMMER Programmer for managing length measurements and number of pieces to be produced SAW GROUP Automatic pneumatic saws for cutting the lamella according to the pre-established length GLUE SPREADER NOZZLES Comb nozzles for one-component glue synchronized with the milling units for applying the glue to the parts to be joined MILLING GROUPS Fixed speed milling groups. TECHNICAL DATA Workpiece height min. mm 25 - max 100 Minimum workpiece length mm 600 - max. unlimited Workpiece width mm 80-260 Joint type 20/20 or 15/15 Constant thrust pressure max ton 20 Production joint /min approx. 4 Final lamella length mm 13000 Total machine weight kg 5500 included: Dueb Ejwg Db Ss Hvwzst AUTOMATIC STACKING OF JOINTED LAMELLAS, WITH ROLLERWAYS AND IDLE ROLLER TRANSFER OF THE LAMELLA STACK AUTOMATIC DE-STACKING OF LAMELLAS WITH SINGULARIZZATOR AND ROLLERWAYS TO FEED THE PLANING MACHINE.

Condition: good (used), Year of construction: 2011, Functionality: fully functional, cutting height (max.): 180 mm, cutting width (max.): 180 mm, cutting length (max.): 7,000 mm, power: 110 kW (149.56 HP), saw blade diameter: 500 mm, total length: 26,000 mm, total width: 9,000 mm, year of last overhaul: 2023, I am selling a log double-blade angle saw Strojcad D9 Dujb E Hov Stlljvwzet The highest cut size is 180 x 180 mm. The highest length of the cut log: 7 meters in series, up to 8 meters in pieces. Log diameter: up to 800mm The saw includes: 1 travel carriage + 4 clamping points with turners, transverse chain conveyor of logs (3 chain tracks), output conveyor, spare parts Year of manufacture: 2011 The machine is in operation, the possibility of inspection and testing

Condition: new, Functionality: fully functional, cutting width at rip fence: 1,270 mm, cutting height (max.): 140 mm, saw blade diameter: 400 mm, rotational speed (min.): 3,700 rpm, motor voltage: 400 V, power: 7 kW (9.52 HP), sliding table length: 3,200 mm, Equipment: scorer, XENIA 40 M. Sliding table saw with a pivoting 400 mm saw blade and scoring device. With motorized height and angle adjustment. - Extractor connection - Extractor nozzle diameter 120 mm - Extractor nozzle diameter of saw blade guard 80 mm - Installation information - Transport width 1150 mm - Machine body length 1800 mm - Machine body width/depth 928 mm - Space required length 7100 mm - Space required width/depth 5050 mm - Dimensions and weight Dusb Ejwg A Rfo Hvwzjt - Weight (net) approx. 764 kg - Explanation of space requirements - The dimensions take into account maximum travel distances or usable lengths. - Working area length 5700 mm - Working area width/depth 1900 mm - Explanation of working area - Please add the specified dimensions to the space requirements to determine the recommended free installation space for the machine. Electrical Data - Supply voltage 400V - Mains frequency 50Hz - Scoring motor power 0.9kW - Drive motor power 7.0kW - Drive motor rated operating mode S6 - Drive motor duty cycle 40% Sliding carriage and table - Trimming frame length 3200mm Circular saw unit - Cutting width with parallel stop 1270mm - Max. cutting width to the left of the sawblade 3200mm - Sawblade inclination 90-45° - Max. cutting height 90° 140mm - Max. cutting height 45° 99mm - Sawblade diameter 400mm - Sawblade speed 3000-4000-5000rpm Scoring unit - Scoring sawblade diameter 120mm - Scoring sawblade speed 8500rpm Equipment - Scoring unit - Anodized aluminum sliding table - Handle for sliding table - Material roll on the trimming frame - Saw parallel stop - with round bar guide - Stops - Professional folding stops - Trimming shoe - Table extension - Table extension - Saw blade pendulum protection If you have any questions, please contact us! Are you looking for a specialist dealer near you? We supply machine dealers throughout Germany, in European and non-European countries with metalworking machines, compressed air technology, woodworking machines, welding technology, as well as cleaning and workshop technology. Contact us and we will tell you the nearest dealer.

Condition: used, Year of construction: 2007, Functionality: fully functional, Cutting width 4300 mm (4450 mm) cutting depth 2600 mm cutting height 150 mm back loaded + rotation table + air cushion table at cutting line Dob E Hjwg Avzovwzjut motor 18 kw sawblad Ø520 mm scorringblade Ø200 mm 12 pcs grippers on the pusher MACHINE AVAILABLE FROM WEEK 46/2025

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Djb E Hvwevu Hfqszeut Item 2: tenoning spindle ----- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: slat conveyor > screen control > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: Note on used tools: We currently have used Gold...

Condition: new, VSA 2048 L Holzkraft Feeder - Exhibition Machine - - Number of feed rollers: 4 Dob E Howfhg Nsvwzjut - Feed speed: 2 - 33 m/min - Speed levels: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33 m/min - Maximum projection: 1050 mm - Roller diameter: 120 mm - Roller width: 60 mm - Roller spring travel: 20 mm Dimensions and weights: - Length (product) approx.: 1665 mm - Width/depth (product) approx.: 220 mm - Height (product) approx.: 540 mm - Net weight approx.: 73.5 kg - Explanation of net weight approx.: including stand Electrical data: - Drive motor power: 0.75 kW - Supply voltage: 400 V - Mains frequency: 50 Hz - New exhibition machine -

Condition: excellent (used), Year of construction: 2005, operating hours: 28,000 h, Functionality: fully functional, arm reach: 14,200 mm, load capacity: 30,000 kg, track width: 3,000 mm, net weight: 28,000 kg, number of previous owners: 1, Equipment: cabin, crane, OBX IV crane Power 45KW Dujb E Hsu H Hq Uevwzst Crane at the front, cab on the left

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Dusb E Hvev Sthgjwzjt Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2024, Functionality: fully functional, The new BLADE OFF safety system – Working with a circular saw has never been safer! • The BLADE OFF system detects potentially dangerous situations early and prevents them by removing the saw blade from the machine table in a fraction of a second. • With the help of sensors, the system is able to distinguish between the workpiece and the operator. • An LED light in the saw blade guard indicates with a green light whether the protection system is active. • Control via 10" eye-S control console. • Connection to "SCM Thundercut" (optimizer/sequence control app) possible. • Electrically adjustable parallel stop. • Start/stop buttons for the main and scoring saw blades integrated into the sliding carriage. • Special guides and an innovative curved design enable the edger carriage to be four times more load-bearing. • Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Dimensions and weights: - Length (product): approx. 7250 mm - Width/depth (product): approx. 4460 mm - Height (product): approx. 1770 mm - Weight (net) Approx. 1314 kg Extraction connection - Extraction nozzle diameter 120 mm - Extraction nozzle diameter saw blade guard 100 mm Installation information - Space required length 7250 mm - Space required width/depth 4224 mm - Space required height 1766 mm - Explanation of space requirements - The dimensions take into account maximum travel distances or usable lengths. Working area length 2850 mm front / rear in mm Working area width/depth 1400 mm left / 500 mm right in mm Explanation of working area Please add the specified dimensions to the space requirements to determine the recommended free installation space for the machine. Electrical Data - Supply voltage 400V - Mains frequency 50Hz - Scoring motor power 1.3kW - Drive motor power 9.0kW - Rated operating mode S6 drive motor - Drive motor duty cycle 40% Sliding carriage and table - Format sliding carriage length 3200mm - Format sliding carriage width 360mm - Table length 1040mm - Table width 630mm Circular saw unit - Cutting width with parallel stop 1500mm - Max. cutting width to the left of the sawblade 3200mm - Trimming length 3200mm - Sawblade inclination 90-45° - Max. cutting height 90° 120mm - Max. cutting height 45° 89mm - Explanation - Max. cutting height with 400mm sawblade - Max. sawblade diameter 400mm - Min. sawblade diameter 300mm - Saw blade speed 3000 – 5000 rpm Scoring unit - Scoring saw blade diameter 120mm - Scoring saw blade speed 8500 rpm Features - Scoring unit with separate scoring motor - Anodized aluminum sliding table - On/Off switch on the sliding table - For main and scoring saw blade motors - Trimming frame - With angle-adjustable aluminum telescopic stop - Material roll on the trimming frame - Saw parallel stop Dueb E Hvswg Anwswzet - Motorized, via control panel - Stops - Professional folding stops - Eccentric clamp - Control of saw blade height, tilt, and parallel stop - Pivoting control panel on top - Table extension - Table extension - Saw blade pendulum protection If you have any questions, please contact us! Are you looking for a specialist dealer near you? We supply machine dealers throughout Germany, in European and non-European countries, with metalworking machines, compressed air technology, woodworking machines, welding equipment, and cleaning and workshop equipment. Contact us and we'll tell you the nearest dealer.

Condition: used, Small log line with Chipper-canters and single blade splitsaw Feeding / sawing speed 60 m/min. The line consist of below parts: - Conveyor for logs Dusb Eeiiciqj Hvwzst - Centring infeeder with log turner - First chipper-canter for round logs - Out feed conveyor - Block tilter - Infeeder to second canter - Second chipper-canter for blocks - Out feed conveyor - Single blade splitsaw We can also offer the equipment serviced

Condition: used, Year of construction: 2017, Working dimension X: 8.500 mm Working dimension Y: 2.600 mm Working dimension Z: 150 mm Number of milling spindles: 2 Main motor power: 15 kW Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 25 Disc tool changer 24-fold: Yes Pickup change place: Yes Vertical drilling spindles: 8 Groove saw: in X-direction Deb Eswfgzfj Hvwzout Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Pin system Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Outfeed: belt conveyor Safety device: Bumper Chip conveyor: Yes Control: SIEMENS SIMATIC HMI TOUCH, SIEMENS SINUMERIK PCU 50 Conformity marking: CE mark Space requirement Length: 14,5 m Space requirement Width: 9,4 m

Condition: new, CPM/400 Prism Machine is specially designed to cut logs between 150-400 mm in diameter and 1.2-6m in length with the help of a circular saw. It is used to cut logs vertically to length with circular saws driven by independent electric motors on four separate shafts in the machine. Dsb Ejm H Uz Ao Hvwzjut Machine; It consists of 3 modules: input module, cutting module and output module. Right and left saws can be positioned in millimeters according to the diameter of the log. As an option, right and left saws can be automatically positioned according to the diameter of the log. CPM/400 Prism Machine, which can cut at high speed and efficiency, is suitable for cutting logs of various lengths (1.2-6 m) according to customer demand, and is preferred in wooden pallets, construction timber and joinery timber production workshops.

Condition: good (used), Year of construction: 2020, I offer for sale CNC Nesting HOMAG CENTATEQ N-500 with chaotic warehouse Storeteq S 200 profi. Machine on display at our client in Slovakia. Dusb E Hjwfgrwjvwzst

Condition: excellent (used), Catalogue No. 7638 TECHNICAL DATA max. diameter of the main blade with the scoring unit 350mm max. diameter of the main blade without the scoring unit 450mm max. cutting height for the 350mm blade 100mm main blade electrically adjustable from the control panel up/down + angle electric adjustment of the scoring unit up/down spindle diameter 30mm spindle locking with format carriage cutting length on the carriage 3200mm electronic cutting width reader on the auxiliary table guide electrically adjustable from the control panel cutting width at the guide 1300mm with side carriage with scoring unit max. diameter of the scoring unit 120mm spindle diameter 22mm scoring unit motor 0.75kW main motor 5.5kW 4 types of rotation speeds 3000, 4000, 5000, 6000 rpm extraction nozzle diameter 120mm, 80mm tabletop dimensions 1230x700mm tabletop dimensions with extension 1650mm tabletop dimensions with extension 2180mm disc guard electric brake dimensions L/W/H 3210x3600x1800mm weight 1100kg ADVANTAGES – German production – electronic cutting width reader on the auxiliary table – main blade, scoring blade, guide electrically adjustable – original documentation – unpainted – used saw, perfect condition Net price: PLN 45900 Dob E Hvowff Rfjwzjut Net price: EUR 10800 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Year of construction: 2019, Functionality: fully functional, 2019 model with old control system and slight paint damage. (The photos are product photos and do not depict the original machine.) Slight signs of wear may occur. Convenient and easy control of all important functions via the front control panel Excellent accessibility to the working units thanks to the large hood, which provides additional protection and noise reduction Precise and proven units enable optimal processing and perfect edge finishing Pre-milling unit equipped with two dia-milling cutters High-frequency motors for edge processing Equipped with radius and flat scrapers as standard Optionally expandable with either a buffing or grooving unit with a groove width of up to 4.0 mm Available in various configurations to adapt to individual requirements Automatic temperature reduction of the glue unit when the machine is idle for extended periods Standard equipment includes an aluminum glue container for EVA hot melt adhesive Dimensions and Weights Length (product) approx. 3314 mm Width/Depth (product) approx. 1085 mm Height (product) approx. 1300 mm Weight (net) approx. 545 kg Flush radius trimming unit Flush radius trimming unit power input 2 x 0.35 kW Flush radius trimming unit cutter diameter HM 55.3 mm Flush radius trimming unit cutter speed 12,000 rpm Flush radius trimming unit extraction nozzle diameter 60 mm Flush radius trimming unit number of extraction nozzles 2 Corner rounding unit Corner rounding unit power input 0.35 kW Corner rounding unit tool diameter 58 mm Corner rounding unit speed 12,000 rpm Electrical data Connection voltage 400 V Mains frequency 50 Hz Glue unit Glue pot power input 0.18 kW Glue pot operating temperature 190 °C Glue pot extraction nozzle diameter 60 mm Glue pot capacity 0.8 kg Pneumatic connection Dusb E Hvjwg Abdjwzst Operating pressure 6.5 bar Feed Feed input power 0.55 kW Feed speed 7 m/min Edges Edge thickness for rolled material 0.4 - 2.0 mm Edge thickness for strip material 0.4 - 3.0 mm Pre-milling unit Pre-milling unit extraction nozzle diameter 2 x 80 mm Pre-milling unit input power 2.2 kW Pre-milling unit cutter speed 9000 rpm Pre-milling unit diamond cutter diameter 80 mm Pre-milling unit cutter height 56 mm Pre-milling unit material removal 0.5 / 1 / 1.5 / 2 mm Scraper units radius scraper 2 mm Buffing unit Buffing unit input power 2 x 0.14 kW Buffing unit speed 2800 rpm Workpiece Workpiece thickness 8 - 50 mm Workpiece length min. 120mm Workpiece width min. 110mm Equipment ----- - 730mm roller edge turntable - Anti-adhesive spray unit - Pre-milling unit with two dia-milling cutters - Edge preheating device - Glue container quick-change kit - Gluing unit - Corner rounding unit - Flush radius milling unit - Radius scraper unit - Flat scraper unit - Buffing unit

Condition: excellent (used), Excellent condition Intermediate filter with rotary valve Ring line to the silo Fan 30 kw 10,050 m3/h Soundproof box 400 mm intake pipe Dujb E Hvwowfgaujzot

Condition: used, Year of construction: 2021, Flow rate: 7.697 m³/h Intake socket: 250 mm Filter surface: 50 m² Number of collection boxes: 2 Underpressure: 3.875 Pa Djbswfgwgo E Hvwzeut Length of filter hose: 2.000 mm Main motor power: 11 kW Machine recognition: Yes Extinguishing automatic: Yes Air system: Underpressure Automatic cleaning: Jet- cleaning Category of filter material: H3 Declaration of CE-conformity: Yes Conformity marking: CE mark

Condition: new, Fine tooth saw blade 216x2,3x30 W60, 500125 For clean and clear cross cuts in solid wood as well as for coated or veneered boards Number of teeth: 60 tooth shape: W Cutting width: 2.3 mm Bore diameter: 30 mm Diameter: 216 mm Bore Ø min.: 30 mm Dsb E Hvwji A Ilwjzsut Diameter min.: 216 mm rake angle: -5 °

Condition: new, Functionality: fully functional, MIDI MAX is the cheapest and most practical solution for dust removal, allowing you to have a large filtration area and a large collection bag. The MIDI MAX suction filter unit is a very reliable system for filtering dust and small sawdust where the quantity is not so large as to require the use of a separate container. Djbowfgnxs E Hvwzeut

Condition: excellent (used), Year of construction: 2014, - Working width: 230mm - Working height: 150mm - Minimum length: 200mm - Spindle speed: 6000 RPM - 5 heads - Head arrangement: bottom / right / left / top / top - Motor power: 5.5, 7.5, 7.5, 7.5 kW - Feed motor power: 3.7 kW - Stepless feed speed adjustment: 6-24m/min Duebsv A Umls E Hvwzet - Spindle diameter: 40mm - Year of manufacture: 2014 - Weight: 4000 kg

Condition: good (used), Year of construction: 2022, Functionality: fully functional, type of input current: three-phase, filter area: 5.31 m², volume flow: 1,400 m³/h, negative pressure: 2,210 Pa, nominal flow rate: 884 m³/h, overall weight: 205 kg, total width: 830 mm, total length: 1,100 mm, total height: 1,600 mm, input voltage: 400 V, noise level: 71 dB, extraction nozzle diameter: 125 mm, tank capacity: 165 l, Return device with slight signs of wear. Serial number: 125PM2246040001 Year of manufacture: 2022 Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Dueb Ejwgz T Se Hvwzjt Suitable for vacuuming and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bag Dust extractor delivered fully assembled, allowing for quick installation All models are mobile For model RLA 210: Optimal chip distribution into the Chip container due to large filter surface Filter description Ultra-compact with maximum filter surface Filter material made of aluminum-coated polyester fleece, resulting in a long service life Filter comes standard with an antistatic design, tested and approved according to category M-BIA The fan is installed downstream of the filter If a warranty is stated in the item description and/or in the description of the scope of delivery, this does not affect your statutory rights against your seller. Please refer to the warranty conditions for the scope, duration, contents, and the guarantor. We assume no liability for printing errors, mistakes, or incorrect representations. Technical and visual changes are reserved. Some images show optional accessories. Delivery is subject exclusively to our terms of delivery and payment. Sales are made through specialist retailers.

Condition: used, Lightweight edge sander Jet type EHVS-80 cs for precise sanding of straight and curved wood edges. The lightweight construction and powerful motor enable a consistent sanding pattern with high removal rates. Ideal for small carpentry shops, furniture construction, and interior design. sanding belt length: 2260 mm Sanding belt width: 150 mm table: Pivotable engine power: 1,5 kW Dusb E Hvjwffpbowzjt Suction nozzle: 100 mm

Condition: new, Special saw blade 216x2,3x30 WZ/FA60, 500123 For laminate flooring and solid surface materials Number of teeth: 60 tooth form: WZ/FA Deb E Hvwei A Iltszjut cutting width: 2.3 mm Bore Ø: 30 mm Diameter: 216 mm Bore Ø min.: 30 mm Diameter min.: 216 mm rake angle: -5 °

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 202129, On behalf of our client, we are offering a Fravol edge banding machine. This is a consignment sale, where the machine can be seen at our warehouse in Brno. Dujbewfgkme E Hvwzet

Condition: as good as new (ex-display), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 17456, cutting length (max.): 3,200 mm, cutting width (max.): 1,270 mm, cutting height (max.): 200 mm, saw blade diameter: 550 mm, overall weight: 1,000 kg, pivoting range: 45 °, power: 7 kW (9.52 HP), Equipment: motor brake, scorer, New machine built in 2021, serial number: Stable steel and gray cast iron construction With three speeds as standard With NC control with 7 inch LC display as standard for adjusting all axes of the machine Saw unit with permanently precise double swivel segment guide, 6-year Holzkraft guarantee on wear of the swivel segments Positioning of the cutting height and the saw blade swivel electrically Duobjvxvbpo E Hvwzst Scoring unit with separate scoring motor Powerful industrial motors Smooth and precise format sliding carriage made of anodized aluminum with proven and permanently smooth ball contact system on hardened, 10-year guarantee on wear of the guideways Large support surfaces thanks to standard table extension and widening Gray cast iron saw table Fold-down parallel stop with fine adjustment and round bar guide Crosscut stop, extendable up to 3200 mm, with two folding stops and eccentric clamp Particularly large boom with material roll, extendable up to 2400 mm Saw blade pendulum guard that can be swung away to the side with integrated suction nozzle Optionally available: mitre stops that extend up to 1500 mm for attachment directly to the sliding carriage Numerous equipment options for individual adaptation