Condition: used, Screw compressor AIRCRAFT A-K-Max 7.5-10-270K (IE3) -gebr Boiler galvanized, Refrigeration dryer, Condensate treatment, Djln Uju R S H Nogu Nout Automatic condensate drain on the boiler, Fine filter with automatic condensate drain, Nanao filter with automatic condensate drain, Ultra-fine filter with automatic condensate drain, Year of construction 2021 ----- Technical data ----- Tank size: 270 liters, Filling capacity: 1050 liters, Maximum pressure: 10 bar, Motor: 7.5 kW, Sound pressure level: 62 dB

Condition: good (used), Code: 0100 Brand: MASTERWOOD Model: OMS 4MM - CE Standard Chain and lock mortising machine for all types of lock housing, for wooden doors, window frames , furniture, shelves - CE Standard Duoljwd Rwbon Ugu Nst Aggregate with 2 horizontal milling cutters for simultaneous execution of key slot and handle hole Max depth of cut mm 150 Max length of cut mm 330 Transversal stroke mm 80 Max working height for doors mm 1000 Vertical worktable stroke mm 250 Mortising machine motor power output Kw 3 Vertical unit motor power output Kw 0,55 Horizontal unit motor power output Kw 1,84 Suction port diameter mm 120 Overall dimensions mm 1400 x 950 x 2100 h Weight kg 850

Condition: good (used), Functionality: fully functional, planing width: 259 mm, total length: 1,200 mm, planing height: 200 mm, overall weight: 100 kg, working width: 255 mm, pass-through height: 255 mm, Planer and thicknesser Planer and thicknesser Dégau-raboteuse 259 x 1200 mm (0>3 mm) Brete 259 x High 200 mm (7,5 m/min) 380V x 3 Ph. Delnou Hxuxe Ugu Njut Weight approx. 100 kg

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Doln Uguowd N Rmj Njut Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: excellent (used), Year of construction: 2004, operating hours: 100 h, Functionality: fully functional, machine/vehicle number: 84780204, overall weight: 3,100 kg, input current: 7 A, input frequency: 50 Hz, input voltage: 400 V, heating capacity: 3 kW (4.08 HP), power: 3 kW (4.08 HP), space requirement width: 1,200 mm, space requirement length: 2,500 mm, The machine was bought by previous managment, and was not used after initial testing. It has been staying in the warehouse for years , not used. If you need more specifications - please let us know. We are simply looking to get rid of it and preffer selling to scrapping. The machine is operatable and in very good condition. There is no glue applicator included. Only the press itself. Doln Uov Txraegu Neut Purpoused to press multiple panels of the same size.

Condition: excellent (used), Two-bag extraction unit Alfarimini Alfa 2 Dujln Uewd Nwtsgu Not Number of filter bags 2 Number of collection bags 2 Bag diameter fi 500mm Connection diameter 200mm Power 3kw Rotation speed 2800 r.p.m Extractor dimensions 160x70x230cmH

Condition: used, Veneer press JOOS HP 90 -used- Emergency stop bar, Dujln Ugou R S S Ssu Nst control by push button, gold anodized plates ----- Technical data ----- Press area: 2,500 x 1,250 mm, max. opening height: 400 mm, Number of cylinders:: 4 pieces

Condition: used, Year of construction: 2017, Working dimension X: 3.200 mm Working dimension Y: 920 mm Working dimension Z: 70 mm Number of milling spindles: 1 Main motor power: 8 kW Torque support: Yes Tool clamping system: HSK-F63 Tool changer positions: 7 Vertical drilling spindles: 13 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Vertical working surface: Yes Machine table: Feed-through technology Vacuum pump: Yes Djln Uguowd Nzrs Neut Number of vacuum pumps: 1 Capacity vacuum pump: 8 m³/h Special workpiece clamping system: Vacuum clamping system Safety device: enclosed cabin Milling for fittings: Lamello Clamex LAMELLO p-System: Yes Interface for .dxf data: Yes Automatic central lubrication: Yes Control: PC control Software: HOLZ-HER CAMPUS NC-HOPS, HOLZ-HER CAMPUS ACADEMY, PC office licence, HOLZ-HER CAMPUS MAKRO PAKET, HOLZ-HER CAMPUS V6 Conformity marking: CE mark

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 300 mm, Seron SLX CO2 Laser/Engraver CO2 Laser Cutters are one of the most universal and versatile machines used in industry. They are successfully used in many industries, from automotive, aviation, to marine and graphics. Technical Data: Interface: USB / Ethernet Working Areas (mm): 950 x 600 Material Pass-Through Doors: For Processing Materials longer than the Table Air Compressor: Included Vacuum Fan: Included Water Chiller: Included CAM Software: RDCAM Laserworks Work Area Lighting: Included Air Assist: Yes Lens: Zinc Si + ZnSe, fi 20mm Mirrors: Silicon SI Table Type: Motorised Lead Screw Vacuum Table with Removable Honeycomb Mesh Laser Pointer: Included Autofocus: Included Maximum Working Height: 300 mm Positioning Accuracy: 0,02HV, RF Laser Power Options: 100W Maximum Cutting Speed: 1500 mm/s Power Requirement: 230V Additional Options: • Rotary Axis • Fume Extraction System • Wi-Fi Communication Processable Materials: • Plywood • Acrylic • Leather • Paper • Cardboard Delivery within UK included with transport charge £1 per mile from CO3 post code. Dslou A Dlhen Ugu Nout

Condition: used, Year of construction: 1987, With this roll press, you can press different materials together in a single pass. Application example: Previously, sandwich panels were bonded and pressed with this machine. Technical data: Dsln Ugujwd Nx Do Nsut - Manufacturer: Bürkle - Type: AM - Year of manufacture: 1987 - Working width: 1,600 mm - Working height: 880 + - 20 mm - Part height 20 - 160 mm - Operating side left - Pressure cylinder from above, rubberised - Counterpressure cylinder from below, rubberised - Width of counterpressure cylinder 1,700 mm - Feed 3 m/min. - Total electrical connection - Volt/Hz 400/50 - Location in warehouse in Blomberg

Condition: like new (used), Saw shaft motor power 75 kW Power of feed motor 5,5 kW Power of height adjustment motor 0,75 kW Total power 81 kW Voltage 400V / 50 Hz Max. working width 500 mm Width of track 500 mm Max. cutting height 170 mm Min. cutting height 10 mm Min. material length 740 mm Min/max blade diameter ø 405 / 505 mm Deln Uguotpi Rue Neut Saw blade bore ø 80 mm Spindle diameter (without sleeve) ø 60 mm Rotational speed 2600 rpm. Feed speed 2.5 - 24 m/min.

Condition: good (used), Klein & Söhne Surface Planer 4-knife cutter block Planing width: 510 mm Table length: 2840 mm Feed table: 1600 mm Discharge table: 1200 mm Slotted table lips Dusln Ujwgwp Nogu Njt Dimensions: length / width / height: 2840 x 950 x 1000 mm Weight: 950 kg

Condition: used, OTT EURO 95WS Wide Belt Sander - Used - Combination unit with contact roller and sanding pad, Rubber-coated contact roller, Digital display for sanding height, Automatic carpet centering, Air-cushioned sanding pad, Sanding belt oscillation ----- Technical Specifications ----- Working width: 950 mm, Number of belts: 2, Sanding belt size: 1,900 x 970 mm, Dueln Uguov Rflzo Not Max. workpiece thickness: 160 mm, Min. workpiece thickness: 3 mm, Extraction nozzle diameter: 2 x 150 mm, Motor power: 7.5 kW, Dimensions (L x W x H): 1,800 x 1,550 x 2,000 mm

Condition: excellent (used), Length 7m Duoln Ugstpi N Eeu Not 4 configurable cutting units Good condition

Condition: used, Panel saw STRIEBIG COMPACT TRK 5207 C -used- Welded frame with extremely high rigidity, automatically deflecting sliding grid, stable locking of the saw carriage at the top and bottom, Dslju R Tfmen Ugu Neut Control panel at eye level, Digital display for horizontal cut, Digital display shows error ----- Technical data ----- Cutting length: 4,600 mm, Cutting height: 2,070 mm, Cutting depth: 60 mm, Saw blade Ø: 250 mm, Motor: 3 kW, Extraction nozzle Ø: 2 x 100 mm, Space requirement (LxDxH): 5,716 x 1,500 x 2,814 mm

Condition: used, RIDEX DM 350 clean air extraction unit with FU -used- with frequency converter incl. pressure transmitter, Air filtration by means of filter bags, motorized cleaning, mobile collection container, incl. automatic fire extinguishing system, Year of construction 2022 ----- Technical data ----- Extraction nozzle Ø: 350 mm, Nominal volume flow: 6,927 m³/h, Max volume flow: 10,000 m³/h, Negative pressure Vnenn: 2000 Pa, Number of bags: 4 pieces, Motor: 15 kW, Duolju R S Sfen Ugu Njt Dimensions (LxWxH): 4,600x1,300x2,600 mm, Weight: 1,320 kg

Condition: new, Edge sanding machine KSO 150 M F 3 PRO Holzkraft Promotional model from stock -1x sanding belt K100 -5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm -6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm -board tool -Mitre fenceDimensions and weights: - Length (product) approx.: 1820 mm - Width/depth (product) approx.: 1050 mm - Height (product) approx.: 1470 mm - Weight (net) approx.: 400 kg Drive power: - Oscillation motor power: 0.38 kW Suction connection: - Suction nozzle diameter: 150 mm Work table(s): - Worktable length: 1000 mm - Worktable width: 280 mm - Table tilt: 45 / 35 ° Electrical data: - Supply voltage: 400 V - Mains frequency: 50 Hz Sanding unit: Dslnou R S Dzs Ugu Nsut - Sanding belt length: 2640 mm - Sanding belt width: 150 mm - Belt speed(s): 14 m/s - Oscillation stroke: 20 mm - Sanding surface length: 890 mm - Sanding surface width: 150 mm - Sanding height max.: 150 mm Subject to prior sale. - new exhibition machine -

Condition: new, Integrated pre-separator Integrated automatic extinguishing system Efficient and economical: large-volume compressed air tank with with fast-switching diaphragm valves for effective OPTI JET filter cleaning and minimum compressed air consumption. So simple and so effective: OPTI JET cleaning and bag filter with bag filter with snap ring lock. Extremely economical: Energy-efficient drives in accordance with IE3 Safe in the event of an emergency: Maintenance-friendly automatic extinguishing system. Peace and quiet: the soundproofed air recirculation system from AL-KO. All options are open: PLC control for manual and automatic automatic operation. Countless options from machine detection to slide control to frequency-controlled operation operation, to name just three examples. Nothing goes wrong: Collecting container with inspection window. Practical down to the last detail: container lock with ergonomically ergonomically shaped clamping lever. Can be retrofitted: conversion to discharge via briquetting press briquetting press or rotary feeder possible. Dujlnou R S A Rs Ugu Not - High suction capacity - little space requirement - 100 % air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control unit - Optimum filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust bulkhead for dust-free container change - (optional: safety interlocking of the containers) - Freely configurable module replacement and expansion options ----- Technical data ----- Extraction nozzle Ø: 300 mm, Nominal volume flow: 5,089 m³/h, max. volume flow: 6,000 m³/h, max. negative pressure: 2,587 Pa, Filter area: 30 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 7.5 kW, Dimensions (LxWxH): 3,000 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 838 kg, according to: GS - HO - 07 - new exhibition machine -

Condition: used, FORMAT 4 profil 45 M x-motion table router -used- swivels to the rear, electric height adjustment, electric tilt, Height and swivel adjustment with positioning control, Positioning control for milling fence, table extension, extendable support, finely adjustable milling fence, right/left rotation, incl. arc milling fence, Swivel device for feed, integral fence, Year of manufacture 2022 ----- Technical data ----- Dueln Usu R Tcxogu Net Swivel range: +5 -45 °, Table size: 2,500 mm, Spindle diameter: 30 mm, Useful length of milling spindle: 140 mm, max. milling cutter diameter: 250 mm, max. retractable cutter diameter: 320 mm, Speeds: 3,500/4,500/6,000/8,000/10,000 rpm, Motor: 7.35 kW, Extraction nozzle Ø: 140 mm, Suction nozzle Ø bottom: 80 mm, weight: 730 kg

Condition: new, with compressed air cleaning and frequency inverter Start-up with frequency converter, Pressure transmitter for demand-based control Integrated pre-separator, Integrated automatic extinguishing system - High suction capacity - little space required - 100 % air recirculation without temperature loss (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control unit - Optimum filter cleaning - Minimal noise level - Optional: patented fill level monitoring Delnsu R S E Es Ugu Nsut Maintenance-friendly, certified automatic fire extinguishing system - Dust bulkhead for dust-free container change (optional: safety interlocking of the containers) - Freely configurable module replacement and expansion options ----- Technical data ----- Extraction nozzle Ø: 355 mm, Nominal volume flow: 7,127 m³/h, max. volume flow: 10,000 m³/h, max. negative pressure: 3,347 Pa, Filter area: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 15.0 kW, Dimensions (LxWxH): 3,320 x 1,058 x 2,361 mm, Sound pressure level: 73 dB(A), Weight: 1,064 kg, according to: GS - HO - 07 - new exhibition machine -

Condition: excellent (used), Edge banding machine LANGE B90KFE -used- touch screen, manual pressure bridge adjustment, Feed by means of transport chain, Extendable workpiece support, diamond milling cutter in synchronous and counter-rotation, bottom-mounted glue pot, Changing device for glue tray, PUR adhesives can be used, Glue tray with run-out / cleaning function, Pressure unit with driven roller, cross-cut saw with HF motor, Flush / radius trimming unit, Milling tools with carbide inserts, Corner copying unit with carbide interchangeable inserts, Radius scraper, Chip box for radius scraper, surface scraper, Spraying device for release agent, Spraying device for cleaning agents, buffing unit, traveling device, infrared lamp ----- Technical data ----- Edge thickness of rolls: 0.4-3 mm, Edge thickness of strips: 5 mm, Workpiece thickness: 8 - 60 mm, Feed speed: 10 / 8 m/min, Support plate Ø for edging material: 790 mm, Extraction nozzle Ø jointing trimming unit: 2x100 mm, Extraction nozzle Ø cross-cut saw: 100 mm, Extraction nozzle Ø trimming unit: 2x100 mm, Extraction nozzle Ø scraper unit: 120 mm, Compressed air connection: 6 bar, Total length: 4400 mm, Dimensions (LxWxH): 4400 x1150x1980 mm, weight: 990 kg Quality info: - all settings checked - adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - electrics checked Delnsu R Ta Do Ugu Nsut - Pneumatics checked - ready for immediate use

Condition: excellent (used), Panel saw ELCON 215 Advance -used- automatic clamps for trimming the underside, welded frame with extremely high rigidity, pneumatically deflecting sliding grid, stable locking of the saw carriage at the top and bottom, retractable riving knife for cut-outs, Control panel at eye level, Digital display on the rip fence, Digital display for horizontal cut ----- Technical data ----- Cutting length: 5,300 mm, Cutting height: 2,150 mm, Trimming height: 2,070 mm, Cutting depth: 80 mm, Saw blade Ø: 300 mm, Motor: 3 kW, Duelju R Tbnsn Ugu Njt Extraction nozzle Ø: 160 mm, Compressed air: 6 bar, space requirement (LxDxH): 6,700x2,800x3,100 mm Quality info: - Complete basic inspection - Complete basic cleaning - electrics checked - ready for immediate use

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked Delneu R S Nwe Ugu Nsut - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: excellent (used), Machining center HOLZHER Dynestic 7521 -used- Nesting table, pusher with suction device, unloading unit with conveyor belt, hardened, dust-protected prismatic guides, 2-sided guided portal design, helical rack and pinion drive (X- and Y-axis), Network card for remote maintenance, Control cabinet cooling with heat exchanger, manual control unit, Swivel saw unit, Plate tool changer on the move, incl. step mats, laser, Automatic central lubrication, New industrial PC, incl. nesting software with free-form boxes ----- Technical data ----- Processing length X: 4,600 mm, Processing length Y: 2,100 mm, max. traversing speed X: 80 m/min, max. traversing speed Y: 100 m/min, max. traversing speed Z: 25 m/min, Machine control software: CAMPUS HOPS, Motor power main spindle: 7.5 kW, Main spindle speed: 1,000 to 24,000 rpm, Main spindle holder: HSK 63F, Spindle cooling: liquid, Motor power drilling unit: 3.0 kW, Mounting of drilling spindles: M10, fit 11 mm, Number of vertical drilling spindles: 18 pcs, No. horiz. Double drilling spindles in X-direction: 2 pcs, Duslnou R Tcre Ugu Net No. horiz. Double drilling spindles in Y-direction: 1 piece, Vacuum pump output: 500 m³/h, Suction connection Ø: 250 / 200 + 2x 80 mm, Compressed air connection: 6-8 bar, Compressed air requirement: 300 l/min. Quality info: - Complete basic cleaning - Electrics checked - Pneumatics checked - adjusted according to manufacturer's specifications - ready for immediate use

Condition: new, HOLZ-HER 7405 EVOLUTION CONNECT machining center -Exhibition machine- This offer is an equipment package. The following items and options are already included in the price: - Material support - Height-adjustable infeed roller conveyor - EVOLUTION diamond formatting cutter set - CAMPUS V8 EVOLUTION CAD/CAM software - Flat screen 21.5", 16:9 - Workpiece length measurement LASER - Milling unit 7830 Dujln Ugsu Tid Hju Njt - 7887 tool changer 6-position magazine pick-up - ECO vacuum system - Air conditioning unit for switch cabinet cooling - Tool changer 7874 - Angular gear 7869 - Adapter for Clamex milling cutters - Tool set - 4-axis CLAMEX - Tool holder HSK-F 63 - Drilling unit XL 7885, 19 spindles - Manual control unit - Tool set - EVOLUTION for XL drilling head 7885 - new exhibition machine -