Window production centre
WEINIG Unicontrol 6 NC Spindeln

Name: WEINIG Unicontrol 6 NC Spindeln
Brand: WEINIG
Availability: InStock

Condition

Used

Location

Oberkochen Germany

Window production centre WEINIG Unicontrol 6 NC Spindeln

Show map

Machine data

Machine type:: Window production centre

Manufacturer:: WEINIG

Model:: Unicontrol 6 NC Spindeln

Condition:: used

Price & Location

Location:: Oberkochen

Call

Details about the offer

Listing ID:: A18375821

Reference number:: 1305-2764

Update:: 19.10.2025

Description

Tenoning spindle 1 St.
Number of milling agregates 4 St.
Spindle diameter 50 mm
control Weinig, PC-Nexus
# 2764 Weinig Unicontrol 6 with NC spindles
-----
Machine will be cleaned and completely checked before delivery

Technical data summary
(please enquire about any additional accessories included)

Item 1: Cross-cut saw
-----
> Electronic cross-cut saw, infinitely adjustable horizontally
Gisdpfsvu Hfqox Agbsl
> Number of tools: 1 piece
> Spindle speed: 2,800 rpm
> Spindle diameter: 40 mm
> Max. tool diameter: 400 mm
> Motor power: 3.0 kW
> Laser aiming light for detecting the saw section
> NC length stop, mounted on slot table included
Positioning of the cross-cut saw integrated in the control system. > Length
3500 mm

Item 2: tenoning spindle
-----
> Number of tools: variable, infinitely variable adjustment NC axis
> Tool clamping length: 320 mm
> Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC
axis
> Spindle speed: 3500 rpm
> Spindle diameter: 50 mm
> Max. tool diameter: 320 mm
> Motor power: 11 kW

Item 3: 1st profiling spindle (synchronous spindle and counter-rotation)
> Position: vertical right
> Number of tools: 1 pc.
> Tool clamping length: 120 mm
> Spindle speed: 6000 rpm
> Spindle diameter: 50 mm
> Max. tool flight circle: 232 mm
> Motor power: 7.5 kW

Item 4: 2nd profiling spindle
-----
> Position: vertical right
> Number of tools: variable, infinitely variable adjustment NC axis
> Tool clamping length: 320 mm
> Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC
axis
> Spindle speed: 6000 rpm
> Spindle diameter: 50 mm
> Tool flight circle max.: 232 mm
> Motor power: 11 kW

2 feed rollers opposite the spindle, axially pneumatically controlled, 2
positions

Rung guide consisting of:
Guide ruler in the stop (area of ??synchronous spindle),
Rung support bar from above in the area of ??profile milling unit vertical right
and profiling spindle.

Pos. 5: Profile milling unit horizontal top
-----
> Clamping length: 40 mm
> Spindle diameter: 40 mm
> Motor power: 3.0 kW
> Speed ??5,850 rpm
> Tool flight circle max. 130 mm
> Axial adjustment range 30 mm, 8 positions using pneumatic turret
> Radial adjustment range 125 mm, 8 positions using pneumatic turret

Pos. 6: 3rd profiling spindle (fitting spindle)
-----
> Position: vertical right
> Tool clamping length: 160 mm
> Axial adjustment range 115 mm, 8 positions using pneumatic turret
> Radial adjustment range 100 mm, 8 positions using pneumatic turret
> Spindle speed: 5,850 rpm
> Spindle diameter: 40 mm
> Max. tool flight circle: 210 mm
> Motor power: 3.0 kW

Other features
-----
> online-capable
> rebating device for tear-free rebating
> double parts package
> return conveyor for 1-man operation: tilting belt
> screen control
> inclined window device
> electronic angle display for inclined windows
> industrial PC, PC control/NEXUS
> Weinig type production program
> without processing tools

No original images available yet.
Images show identical machines from our archive.
-----
Price of the above-mentioned machine upon request!
-----
Optional with additional charge: EUR 6.500,00
Note on used tools:
We currently ha...

Seller

Last online: A week ago

Registered since: 2002

111 listings online

Call

Send inquiry

Telephone & Fax

+49 7364 ... show

+49 7361 ... show

Fax:

These listings may also fit your interest.

Listing

Oberkochen

18,554 km

Window production centre
WEINIGUnicontrol 6 NC-Spindeln

Call

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- Gisdpfx Ajvu Hghjgbsl > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment path pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser aiming light for detecting the saw section Item 2: Rounding unit horizontal below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9,000 rpm > Max. tool flight circle: 130 mm > Axial adjustment path mechanically coupled with Crosscut saw > Adjustment path radial pneumatically controlled on/off Length stop NC controlled ----- > Length 3500 mm > Electronic length stop Item 3: Tenon and slot spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Item 4: 1. Profiling spindle (same and opposite rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Item 5: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatic opposite the spindle controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??the synchronous spindle), Rung support bar from above in the area of ??the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment range 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-way turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > Axial adjustment range 100 mm, 8 positions > Radial adjustment range 1...

See details

Listing

Crane truck Mercedes-Benz AK 8X8 FASSI 660 EINZELBER SEILWINDE

Schlierbach

18,597 km

Crane truck
Mercedes-BenzAK 8X8 FASSI 660 EINZELBER SEILWINDE

Call

Condition: used, mileage: 306,127 km, first registration: 10/2013, total length: 10,600 mm, total width: 2,520 mm, total height: 300 mm, Year of construction: 2013, Equipment: ABS, EBS, air conditioning, crane, cruise control, electronic stability program (ESP), power assisted steering, traction control, - Stability control = Additional options and accessories = - Differential lock = Notes = DB ACTROS 4146 AK MP3 8X8 Crane Truck with Fassi 660 Loader Crane / Winch and Slewing Servo !! SINGLE TIRES !! • ALL-WHEEL drive! • Full leaf spring suspension! • EURO 5 • Telligent 16-speed transmission with clutch pedal • Air conditioning • Enhanced engine brake • Cruise control • Auxiliary heater • Hill start assist • 2 x differential locks • ABS deactivatable • Signal horn Giodpfx Ajwmn Tlogbol • Light bar with LED work lights • Rotating beacons • Multifunction steering wheel • Radio-CD player • Telephone • Tires: 395/85 R20 • Good tire tread! • Unladen weight: 22,544 kg • Perm. GVW: 32,000 kg (36,000 kg technically possible!) • Trailer hitch – jaw coupling • Perm. trailer load: 12,500 kg • 2-line trailer brake system • Overall vehicle length: 10,600 mm Superstructure: FASSI 660 XD Type F600A / 660 AXP 24 • Remote control • 4 hydraulic extensions • Hydraulic ROTATOR • Hydraulic WINCH • 4-point outriggers • 10-ton lifting beam • Flatbed body MÜLLER with side walls Special equipment: 2-line trailer brake, trailer coupling: G 150, 24V / 15-pin trailer socket, brushed steel dashboard, Audio system: CD radio (Bluetooth incl. permanently installed phone), 220 Ah battery, air horn(s) on cab roof, Cab: reinforced cab suspension strut, Cab: movable cab entry, Cab: comfort suspension (1.8 Hz), construction vehicle filter, 100 A alternator, 400 l fuel tank, reinforced clutch, reinforced cooling, PTO MB 10C, programmable special module, revolving beacon left/right, heat insulated side windows, circuit breaker, Cab seats: comfort driver's seat, air-sprung incl. horizontal suspension, sun visor, sun blind side windows, driver and passenger door, power inverter 24V / 12V 15 A, reinforced rear axle stabilizer, 12 V socket, front bumper in steel, crossbeam for trailer coupling, additional thermal insulation, auxiliary water heater, transmission oil cooler Further equipment: 2nd steered front axle, EURO 5 emission standard, axle configuration: 8x8/4, front axle load 9.0 t, trailer coupling: towing coupling, vertical exhaust muffler behind cab, electric & heated exterior mirrors, steel roof hatch, rear axle differential lock, front axle differential lock, cab: S (short), suspension: leaf/leaf, electric windows, 16-speed transmission, rear axle H 7, 13 t, crown gear 300, hydraulic pump (Meiller pump - 6 pistons), body/superstructure: chassis for tipper (additional AV), body/superstructure: tipper, model revision from 06/2008, engine 12.0 l - 335 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4800 mm, rear window, Telligent transmission, Telligent brake system with ABS, drum brakes front and rear axle, transfer case with differential lock, CB radio prep, phone/fax prep, immobilizer, heat insulating glazing, central locking Cab: single

See details

Listing

Automatic finger jointing line GOMA FC10KZ6 PZ6/2

Szczecinek

17,875 km

Automatic finger jointing line
GOMAFC10KZ6 PZ6/2

Call

Condition: excellent (used), Year of construction: 2012, Set for finger jointing in medium and mass production. Gjdpfjlu D Tfex Agbsil The machine is technically efficient and in good condition. Several sets of tools are included. Characteristic: – industrial set with one tenoning machine. Loading the package under the supervision of the operator enables the processing of inferior raw material, – sensitivity controlled by microprocessors /automatic control/, – turning the package after 1 treatment on the turntable (sharp connection) or turning the package on the back (furniture joint with a line; unique GOMA solution), – the set includes an automatic station for loading the press, – the possibility of using cuts on the press, Tenoner with feed table Data Values Milling spindle fi 50x210 mm Spindle speed 6000 rpm 18.5 kW motor Tool dimensions fi 250x160 mm The saw spindle aligns the face Special chipper fi 300x8 mm 6 kW / 3000 rpm motor Stepless feed table Working width x working height 600 x 30-160 mm Glue nozzle outline by tool PRESS FC-10 PZ6/2 Data Values Board width 30-160 mm Jufefe Board thickness 20-70 mm The length of the finished board is 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic power pack 3 kW / 140 bar

See details

Listing

CNC drilling machine with inserting Koch Sprint-PTP

Slovakia

17,842 km

CNC drilling machine with inserting
KochSprint-PTP

Call

Listing

Nattheim

18,550 km

Angled system
OkomaUF 3 S

Call

Listing

Marano Vicentino

18,598 km

Wide belt sander
VietRR-1350

Call

Condition: excellent (used), Year of construction: 1988, utomatic wide belt sander with 2 belts for varnish, wood, veneer, composite materials and various materials Technical data: Working width mm 1350 Max useful height mm 130 Belt size mm 2450 x 1350 Composition: 1° Group: Sanding roller diameter mm 320 - sh. 60 - Blowers cleaning belts - Motor Kw 11 with speed variator 2° Group: Sanding roller diameter mm 320 - sh. 40 - Blowers cleaning belts - Motor Kw 11 with speed variator Scotch brite - Motor Kw 1,5 Vacuum table - Motor Kw 5,5 Gijdpfegmbu Ijx Agbel Feed belt speed variator 4/19 mt/min Operating pressure 7 Bar equipped with Abrasive belts series Overall dimensions: machine mm 2000 x 2700 x 2500 vacuum pump mm 800 x 700 x 900 h

See details

Listing

4 side moulder WEINIG Profimat 23 Fenster

Oberkochen

18,554 km

4 side moulder
WEINIGProfimat 23 Fenster

Call

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ----- Machine will be renovated and functionally checked! Technical data summary (please inquire about any additional accessories included) ----- Generally ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically clocked up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: Glass bead saw pneumatically up and down Spindle description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glazing bead removal > ATS control, automatic 2-axis positioning for width and height (left and Gijdpfx Asu Su Huegbol upper spindle) with program memory 99 programs > Machine operation: window package Joint control of the right spindle and the glazing bead removal via manual selector switch in the control panel > Spindles with mechanical digital display Option: used planer heads (technical data according to the manufacturer - no guarantee!)

See details

Listing

UniControl 12 WEINIG UniControl 12 - UniTec + UniVar

Trondheim

17,332 km

UniControl 12
WEINIGUniControl 12 - UniTec + UniVar

€25,000

EXW fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal Gjdpfemgc I Njx Agboil - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

See details

Listing

Window production plant Weinig Unicontrol 10 Weinig Unicontrol 10

Tauberbischofsheim

18,531 km

Window production plant Weinig Unicontrol 10
WeinigUnicontrol 10

Call

Condition: used, Angular system Weinig Unicontrol 10 (UC 10) for the production of windows, elements and doors. Frame by frame, in series or individual part production with 2 tapping and slotted spindles incl. Oertli tool set * Aggregates: 1. Crosscut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tapping and slotting spindle, NC axis, ø 50 mm, 15 kW, Clamping length: 640 mm (8 x 80) mm 3. Second tapping and slotting spindle, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Profiling unit, horizontal from above, 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Profiling unit, vertical right, 3 kW 9. Profiling unit, vertical right from above, 3 kW 10. Profile milling unit, horizontal from below, NC axis 3 kW * Double part package * Milling package with milling carriage * Automatic turning system * PC control NEXUS * CNC controlled length stop * Studio window facility * Aggregate for edge rounding from below with a crosscut saw * Rung support bar * Incl. suction pipe system * Incl. tool set Oertli * Further technical data and tool drawings on request. Giedev Ag Tdopfx Agbsl

See details

Listing

Angular window machining center SCM GROUP WINDOR 60

Herning

18,059 km

Angular window machining center
SCM GROUPWINDOR 60

€15,000

fixed price plus VAT

Call

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Gedpfxjt R T Hcj Agbsil Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

See details

Advertise here