Feed-through veneer press
Sergiani LAS Plus

Name: Sergiani LAS Plus
Brand: Sergiani
Availability: InStock

Year of construction

1997

Condition

Used

Location

Salzburg

Feed-through veneer press Sergiani LAS Plus

Show map

Machine data

Machine type:: Feed-through veneer press

Manufacturer:: Sergiani

Model:: LAS Plus

Year of construction:: 1997

Condition:: used

Price & Location

Location:: 5020 Salzburg, Österreich

Call

Details about the offer

Listing ID:: A18791621

Reference number:: 3214

Update:: 24.04.2025

Description

No. 3214
Ihedpjv Sthgjfx Ahvew

Feed-through veneer press Sergiani LAS Plus

Used, year of construction 1997, already dismantled and stored

Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled.

The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically.

Glue spreader / glue applicator not included (optionally available)

Stages: 10
Pressing force: approx. 5.5 kg/cm²
Total force: 200 tons
Panel size: approx. 2500 x 1300 mm LW
Heating: Hot water
Area of application: Production of doors, laminating, veneer and wood-based material processing
High productivity with a capacity of up to 1200 doors per shift (factory specification)
Vacuum loading system with 2-lane infeed roller conveyor, without gluing
Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW)
Vacuum stacking station with outfeed roller conveyor

Space requirement for press with loading table approx. 6500 x 2365 mm LW
Space requirement for entire production line approx. 25000 x 5710 mm LW

Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly
Loading and transportation by us optionally possible

Subject to errors in the description and price

To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended

Sold as is

Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee
Subject to prior sale
For used machines, any warranty is excluded, the following applies: “purchased as seen”
Pictures and videos serve as examples and do not represent the actual scope of delivery

Terms of payment: Prices excl. VAT, payment before collection or dispatch

Terms of delivery: ex location

Seller

Registered since: 2019

77 listings online

Call

Send inquiry

Telephone & Fax

+49 7361 ... show

Fax:

These listings may also fit your interest.

Listing

20-29-556 Wide belt sanding machine with WOODLAND MACHINERY R-R-RP1300

Jonava

17,370 km

20-29-556 Wide belt sanding machine with
WOODLAND MACHINERYR-R-RP1300

€26,000

Fixed price plus VAT

Call

Condition: new, with planing spindle Type R-R-RP1300 Working width 1300 mm Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Ihodod H Sc Ejpfx Ahvow Weight 4700 kg

See details

Listing

UNLOADER (SINGLE-CAGE) RBO (BIESSE Group) Tornado SC 1300

Roreto

18,901 km

UNLOADER (SINGLE-CAGE)
RBO (BIESSE Group)Tornado SC 1300

Call

Condition: excellent (used), UNLOADER (SINGLE-CAGE) Iedocggy Sepfx Ahvjhw - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

See details

Listing

Sliding table saws Fimal Concept 350 2018 Fimal Concept 350

Wijchen

18,567 km

Sliding table saws Fimal Concept 350 2018
FimalConcept 350

Call

Condition: used, Year of construction: 2018, total length: 5,000 mm, total width: 1,500 mm, total height: 1,650 mm, Weight: 1.450 kg Price: On request - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 1408 - Max. cutting length [mm]: 3800 - Max. cutting height [mm]: 95 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 125 - Spindle speed: - └ Max. spindle speed [rpm]: 4000 - Schuinstelbare zaagaggregaat: Ihedpfx Ahsx Igayovjw - └ Min. tilt adjustable [°]: 0 - └ Max. adjustable [°]: 45 - Voltage [V]: 400 - Current consumption [A]: 19 - Transport dimensions: 5000mm x 1500mm x 1650mm (l x w x h) - Transport weight [kg]: 1450kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

See details

Listing

Angular window machining center SCM GROUP WINDOR 60

Herning

18,059 km

Angular window machining center
SCM GROUPWINDOR 60

€15,000

Fixed price plus VAT

Call

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Iedpfst R T Hcjx Ahvshw Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

See details

Listing

Kaunas

17,395 km

Edgebander
SCMOlimpic K 560

Call

Condition: used, Year of construction: 2018, functionality: fully functional, SCM Olimpic K 560 Automatic Edge Gluing, year 2018 for sale! Complectation: Chain feed speed 12/18m/min Edge thickness 0.4/3mm EVA glue Panel milling unit "RT-V" Glue application unit "VC-S4.1" Edge trimming unit "K-SEL" Edge milling unit "R-K" Edge corner rounding unit "ROUND X" Edge scraping unit RAS-K Polishing unit SP-V Technical characteristic: Conveyor speed (two speeds) m/min 12 - 18 Min / max part thickness mm 8 - 60 Thickness of glued wooden edge mm 0.4 - 6 (8mm HP composition) Thickness of glued roll edge mm 0.4 - 3 Maximum area of glued roll edge mm² 135 Diameter of reel support "plate" mm 780 Maximum overlap of glued edge, relative to the part mm 2+2 Minimum distance between transported parts mm 600 Minimum length of part (when the width of the part is min. 100 mm) mm 140 Minimum length of roll edge mm 180 Minimum length of wooden edge mm 220 Minimum width of the part (when the length of the part is min. 210 mm) mm 95 (60mm opc.) Width of the extension support mm 560 Height of the worktable from the floor mm 900 Plate milling unit "RT-V" Max. chip removal area mm2 55 Max. milling thickness mm 3 Isdew Sw Tkepfx Ahvjhw Min. / max. thickness of the part mm 8 - 45 (60mm opc. Motor power kW 2 x 1.5 Mill diameter mm 100 Mill height mm 49 (64mm opc.) Tool rotation speed rpm 9000

See details

Listing

Painting Line Venjakob Perfect, OIR, Air Jet, 3D- Venjakob VEN SPRAY and Drying, UV Line

Germany

18,510 km

Painting Line Venjakob Perfect, OIR, Air Jet, 3D-
VenjakobVEN SPRAY and Drying, UV Line

Call

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request Iodpfxeu Afu Ro Ahvjhw

See details

Listing

2005 BIESSE ROVER B 4.40 FT BIESSE ROVER B 4.40 FT

San Giovanni Al Natisone

18,442 km

2005 BIESSE ROVER B 4.40 FT
BIESSEROVER B 4.40 FT

€17,000

Fixed price plus VAT

Call

Listing

Four Side Planer WEINIG profimat 23 fortec

Grońsko

17,981 km

Four Side Planer
WEINIGprofimat 23 fortec

€14,100

~~€16,350~~

Fixed price plus VAT

Call

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, Ihoderigxyepfx Ahvjw length of the machine 415cm machine checked in original condition

See details

Listing

MJ3971Ax400 Timber Horizontal Band Saw FOSHAN RED MACHINERY MJ 3971x400

Kłodawa

18,012 km

MJ3971Ax400 Timber Horizontal Band Saw
FOSHAN RED MACHINERYMJ 3971x400

Call

Condition: excellent (used), Year of construction: 2018, working size (mm) 400X300mm Distance from saw blade to worktable (mm) 3~200mm Conveyor belt width (mm) 385mm Saw wheel power (kw) 18.5kw Saw unit sprocket diameter (mm) 711mm Feeding speed (m/min) 0~12m/min Hydraulic pressure (kg/cm²) 55kg/cm² Isdpsi Ay Hqofx Ahvjhw Dust outlet diameter 102mmX2 Blade size (L x W x H) (mm) 4572 x 27 x 0.9mm Saw Gap (mm) 1.5~1.8mm Overall dimensions (LxWxH) (mm) 3000x2250x2000 Net weight (kg) 2100kg

See details

Listing

Mechanisation for planer and moulder JONAB KVH / BSH / 13 m

Achern

18,690 km

Mechanisation for planer and moulder
JONABKVH / BSH / 13 m

€9,500

Fixed price plus VAT

Call

Year of construction: 1988, condition: repair required (used), mechanisation for planer infeed -For lengths up to ca. 13 m -Ideal unit for KVH (solid construction timber)and BSH (laminated beams) in front of the planer -1 operator -lateral destacking unit -separation -4 cross cut saws -cutting cross section 180x220 mm, 150x300 mm Ihodpsvbtpjfx Ahvsw

See details

Advertise here