Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 020033, spindle speed (max.): 5,000 rpm, spindle diameter: 110 mm, controller model: Siemens SINUMERIK, empty load weight: 11,000 kg, counter spindle speed (max.): 5,000 rpm, The machine is expected to be available for approximately €4,000, including loading onto a truck (FOB). TECHNICAL DETAILS Working area X1-axis: 1,190 mm Working area Y1-axis: 120 mm Working area Z1-axis: 260 mm Working area X3-axis: 540 mm Working area Y3-axis: 120 mm Working area Z3-axis: 260 mm Handling space X1-axis: 490 mm Axes and Feed Feed force X1/Z1/Y1: approx. 8/10/10 kN Feed force X3/Z3/Y3: approx. 8/10/10 kN Rapid traverse speed X1/Z1/Y1: approx. 80/40/7.5 m/min Rapid traverse speed X3/Z3/Y3: approx. 40/40/7.5 m/min Acceleration X1/Z1/Y1: 7/7/7 m/s² Acceleration X3/Z3/Y3: 7/7/7 m/s² Spindle Speed at main and counter spindle: 5,000 RPM Power at 100% duty cycle, main spindle: 20 kW Torque at 100% duty cycle: 105 Nm Power at 40% duty cycle: 27 kW Torque at 40% duty cycle: 145 Nm Spindle bore: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose diameter (cylindrical): 140 mm Hydraulic full-stroke cylinder OVS80 - Main spindle Piston stroke: 32 mm Piston area: 34.36 cm² Clamping pressure: 8 to 80 bar Tensile or compressive force at 80 bar: max. 27.2 kN Pgedpfezdqdfox Aahjn Leakage oil volume at operating pressure 80 bar: max. 2.2 l/min Hydraulic full-stroke cylinder OVS65 - Counter spindle Piston stroke: 32 mm Piston area: 26.1 cm² Clamping pressure: 8 to 100 bar Tensile or compressive force at 100 bar: max. 26.1 kN Leakage oil volume at operating pressure 100 bar: max. 3 l/min Y-axis Slide travel: 120 mm Feed force: 10 kN Rapid traverse: 7.5 m/min Resolution: 0.05 mm Speed of driven tools: 6,000 RPM MACHINE DETAILS Control system: Siemens SINUMERIK Unloading device Swivel angle: 90 degrees Swivel time: 2 s Slide travel: 100 mm Rapid traverse speed: 6 m/min Workpiece weight: approx. 10 kg Workpiece diameter: 200 mm Electrical data Rated power: 45 kW Apparent power: 53 kVA Rated current: 76 A Voltage: 400 V Frequency: 50/60 Hz Dimensions and weight Dimensions with chip conveyor (L x W x H): 2,770 x 4,435 x 2,750 mm Weight: approx. 11,000 kg EQUIPMENT Two tool holders with 12 tool positions each, VDI 30 Note: Further technical data can be found in the attached data sheet. The machine is not equipped with a B-axis.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,808 h, functionality: fully functional, machine/vehicle number: NL257181158, turning length: 705 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, swing diameter over cross slide: 742 mm, swing diameter over bed slide: 920 mm, New auction due to buyer's payment default! TECHNICAL DETAILS Working Area Pgsdpfxozck Txe Aahsn Swinging diameter over bed max.: 920 mm Swinging diameter over cross slide max.: 742 mm Turning length max.: 705 mm Bar capacity: 80 mm X-axis travel: 260 mm Y-axis travel: 50 mm Z-axis travel: 795 mm Main Spindle Power: 18.5/15 kW Speed max.: 4,000 rpm Chuck size: 10 inches Spindle bore: 91 mm Front bearing diameter: 140 mm Counter Spindle Power: 11/7.5 kW Speed max.: 4,000 rpm Chuck size: 6 inches Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Arbor cross-section: 25 mm Speed of driven tools max.: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Dimensions & Weight Machine height: 2,000 mm Footprint: 3,347 x 2,106 mm Weight: 5,820 kg Operating hours: 2,808 h Power-on hours: 11,311 h EQUIPMENT Y-axis Counter spindle Main spindle with 10-inch chuck Counter spindle with 6-inch chuck Chip conveyor High-pressure coolant system Tool measuring device Parts catcher Workpiece ejector Interface for bar loader

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, center width: 1,500 mm, center height: 250 mm, swing diameter over bed slide: 500 mm, spindle speed (max.): 2,800 rpm, controller model: Monforts Control System MTC K, The machine was overhauled in 2017! The corresponding invoices are available upon request. TECHNICAL DETAILS Swinging diameter over bed: 500 mm Swinging diameter over slide: 290 mm Distance between centers: 1,500 mm Spindle bore: 70 mm Center height: 250 mm Spindle speed: 2 - 2,800 rpm MACHINE DETAILS Control system: Monforts Control System MTC K Control method: Teach-in Dimensions & Weight Dimensions (L x W x H): 3,350 x 1,550 x 1,800 mm Net weight: 3,300 kg Transport packages: 1 Psdpfx Aaozdfzaohogn EQUIPMENT Fixed steady rest 3-jaw chuck Documentation CE marking

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, spindle speed (max.): 3,500 rpm, travel distance X-axis: 271 mm, travel distance Y-axis: 600 mm, center width: 600 mm, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Turning diameter over bed: 350 mm Distance between centers: 600 mm Bed width: 210 mm Travel in X-axis: 271 mm Travel in Y-axis: 600 mm Spindle bore: 62 mm Maximum spindle speed: 3,500 rpm MACHINE DETAILS Control system manufacturer: Siemens Power: 30.0 kW Dimensions & Weight Dimensions (L x W x H): 4,300 x 2,100 x 2,100 mm Net weight: 5,000 kg EQUIPMENT Chip conveyor Three-jaw chuck Podpfx Aozdd Npsahsgn Bar feeder Driven tools C-axis Note: The parameters are stored, but are lost if the power supply is interrupted. As long as the power supply is maintained, this is not a problem.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, The following work was carried out on the machine: Repair/overhaul of the gearbox of the B-axis (2025) Complete maintenance (2025) Motor magazine renewed (2025) Replacement of the linear guides of the X and Y axes (2024) Renewal of the ball screws of the X and Y axes (2024) Repair of the milling spindle (2024) Including approximately 120 tools, SK 50 TECHNICAL DETAILS Turning length: 1,524 mm Turning diameter: 820 mm Travel range, X-axis: 870 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 1,598 mm Main spindle Spindle speed (max.): 3,300 rpm Drive power of main spindle: 30 kW / 22 kW Max. torque of main spindle: 588 Nm Spindle nose of main spindle: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Counter spindle Spindle speed (max.): 3,300 rpm Drive power of counter spindle: 30 kW / 22 kW Max. torque of counter spindle: 588 Nm Spindle nose of counter spindle: A2-11" Indexing: 0.0001 Milling spindle Drive power of milling spindle: 37 kW Max. torque of milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Rapid traverse, X-axis: 40 m/min Rapid traverse, Y-axis: 40 m/min Rapid traverse, Z-axis: 40 m/min MACHINE DETAILS Control system: Mazatrol 640M PRO Tool holder: SK50 Number of tool positions: 120 Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required installation area (L x W): 7 x 3.5 m Operating hours: 60,683 h Pgjdezcwylspfx Aahon EQUIPMENT Approx. 120 tools, SK 50 Variable speed adjustment Tool magazine, 120 positions High-pressure coolant, 70 bar Renishaw probe (new in 2025) Laser measuring system for rotating tools Interface set Air/water cooling through the spindle Overload monitoring system Chip conveyor, Mayfran Consep 2000 Quick-change tool holder, SMW

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 7402-09-03006-03, spindle bore: 90 mm, rotational speed (max.): 2,000 rpm, center width: 3,000 mm, center height: 325 mm, controller model: SIEMENS SINUMERIK 810D, TECHNICAL DETAILS Swinging diameter over bed: 630 mm Swinging diameter over carriage: 380 mm Center height: 325 mm Distance between centers: 3,000 mm Carriage overhang on bed: 700 mm Bed width: 520 mm Longitudinal travel X-axis: 355 mm Longitudinal travel Z-axis: 3,000 mm Tailstock spindle diameter: 100 mm Tailstock spindle travel: 180 mm Maximum workpiece weight between centers: 3,000 kg Maximum workpiece weight in cantilever mode: 500 kg Spindle bore: 90 mm Spindle mounting: DIN 55027/8 Spindle taper: 120 mm Front spindle bearing: 130 mm Main drive power 100% ED / 40% ED: 12 / 18.5 kW Maximum torque: 2,400 Nm Speed: 2–2000 rpm Speed ranges: 3 Range 1: 2–220 rpm Range 2: 50–660 rpm Range 3: 100–2000 rpm Speed control: 50–120 % MACHINE DETAILS Control system: SIEMENS SINUMERIK 810D Load display on screen: 0–140 % Main drive: 10 kW Power supply: 3 × 400 V / 50 Hz Podpfx Aaszc Hmnohegn Dimensions & Weight Dimensions (L (with chip conveyor) x W x H): 5,600 x 1,950 x 1,850 mm Machine weight: approx. 5,500 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 500 mm, turning diameter: 300 mm, spindle bore: 75 mm, spindle speed (max.): 3,800 rpm, controller model: OSP 5000L-G CNC-System, No minimum price – guaranteed sale to the highest bidder! Turning machine with integrated Okuma robot! TECHNICAL DETAILS Turning diameter over cross slide: 450 mm Turning length: 500 mm Turning diameter: 300 mm Spindle bore: 75 mm Spindle speed: 70 - 3,800 rpm Spindle power: 11 kW (30 min) / 7.5 kW continuous operation Travel X-axis: 400 mm Travel Z-axis: 500 mm Rapid traverse X-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Feed rate XZ: 12,000 mm/min Data transmission: RS232 Tool turret: 12 positions MACHINE DETAILS Control system: OSP 5000L-G CNC system Data transmission: RS232 Tool turret: 12 positions Power supply: 3 × 400 V Rated machine power: 21 kVA Psdpfxozc E Dfj Aahjgn Maximum load current: 36 A Dimensions & Weight Dimensions (L (with chip conveyor) x W x H): 3,900 x 1,800 x 1,800 mm Machine weight: approx. 4,500 kg EQUIPMENT Integrated Okuma robot Automatic parts feeding Ideal for series and automated turning operations Stable and durable design

Condition: ready for operation (used), functionality: fully functional, turning diameter: 660 mm, spindle bore: 76 mm, spindle speed (max.): 5,000 rpm, controller model: MAZATROL Fusion 640 MT, spindle torque (max.): 349 Nm, TECHNICAL DETAILS Turning diameter max.: 660 mm Main spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 22 / 15 kW Torque max.: 349 Nm Pgodpfxjzgufrs Aahen Spindle bore: 76 mm Chuck diameter: 210 mm C-axis indexing: 0.0001° Sub spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 18.5 / 15 kW Torque max.: 326 Nm Chuck diameter: 210 mm C-axis indexing: 0.0001° Cooling Coolant tank volume: 300 l Pump capacity: 20 l/min Pump pressure: 5 bar Compressed air requirement: 5 bar, 500 l/min MACHINE DETAILS Control model: MAZATROL Fusion 640 MT Total power consumption: 66 kVA Operating voltage: 400 V / 50 Hz EQUIPMENT Technical documentation Chip conveyor with cooling system 20-position tool magazine B-axis (positioning in 0.001° increments) C-axis Y-axis Angular positioning of the sub spindle Synchronization of main and sub spindle Tool setting system (Tool Eye) Interlock for the front door Complete cooling system Interface for IC memory card

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 402 mm, turning length: 758 mm, turning diameter: 450 mm, spindle speed (max.): 3,000 rpm, turning diameter over bed slide: 582 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning diameter: 450 mm Maximum turning length: 758 mm Diameter of rotation over the bed: 582 mm Diameter of rotation over the cross slide: 402 mm Spindle speed: 3,000 rpm Maximum spindle torque: 351 Nm Distance between centers: 744 mm Bar diameter: 81 mm Chuck size: 260 mm (10") Maximum bar diameter: 40 mm Pgsdozgt U Sepfx Aahon Axes: X, Z Number of tool positions in the tool changer: 12 Tool shank size: 25 × 25 mm Travel in the X-axis: 250 mm Travel in the Z-axis: 790 mm Rapid traverse rate in the X/Z direction: 30 m/min MACHINE DETAILS Control model: Hurco WinMax Spindle power: 22 kW Power supply: 400 V / 50 Hz (market-dependent) Machine weight: approx. 5,000 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: X2S174, turning diameter over cross slide: 246 mm, turning length: 1,200 mm, spindle speed (max.): 2,700 rpm, turning diameter over bed slide: 400 mm, controller model: Fanuc 0i-TF Plus, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Swinging diameter over bed: 400 mm Swinging diameter over cross slide: 246 mm Swinging diameter in the steady rest area: 585 mm Spindle speed range: 1–2,700 rpm Distance between centers: 1,200 mm Spindle bore: 55 mm / 80 mm Spindle nose: D1-6 Camlock Podozgt Urjpfx Aahsgn Chuck size: 250 mm Axes: X, Z MACHINE DETAILS Control model: Fanuc 0i-TF Plus Main motor power: 7.5 kW Machine weight: approx. 2,200–2,500 kg EQUIPMENT Coolant system Manual tailstock Automatic lubrication of guideways and ball screws

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Travel distance tailstock: 640 mm Travel distance X-axis: 310 mm Travel distance Z-axis: 640 mm Travel distance Y-axis: +70/-50 mm Travel distance B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Spindle speed max.: 3,500 rpm ASA 8" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 43,712 h Total operating hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Pgedpfezdrzxsx Aahon Dimensions & Weight Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm Machine weight: 6,500 kg EQUIPMENT Gantry loader

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 81 mm, turning diameter: 99 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 240 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning length: 81.3 mm Maximum turning diameter: 99.1 mm Pgsdozfg E Ispfx Aahon X-axis: 300 mm Z-axis: 240 mm Spindle head: A2-6 Spindle bore: 33 mm Speed (variable): 4,000 rpm Spindle motor power: 11 kW Number of tools on the turret: 8 Number of driven tools: 10 MACHINE DETAILS Control: Fanuc 21iT Dimensions & Weight Machine dimensions (including chip conveyor): 290 x 235 cm Machine weight: 4,000 kg Dimensions of transformer station: 65 x 60 cm Weight of transformer station: 150 kg Overall dimensions (L x W x H): 2,600 x 2,300 x 2,400 mm Total weight: 3,900 kg EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: ML0313-000510, turning length: 1,275 mm, turning diameter: 481 mm, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, The machine has only been in operation for approximately one year! MACHINE DETAILS Power supply: AC 380 V, 3 phases, 50/60 Hz Rated power: 36.11 kVA Full load current: 54.87 A Machine weight: 6,900 kg FEATURES CNC control with operator panel Tool turret Tailstock Spindle chuck Enclosed working area Long-bed design CE marking The following data is taken from a manufacturer's data sheet. The seller assumes no liability for its accuracy: TECHNICAL DETAILS Standard spindle chuck, main spindle: 12″ Maximum turning diameter: 481 mm Maximum turning length: 1,275 mm Travel distances Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 30 m/min Travel X-axis: 260 mm Travel Z-axis: 1,350 mm Main spindle Spindle speed max.: 2,800 rpm Spindle power max.: 35 kW Spindle torque max.: 1,613 Nm Tool changer Number of tools: 10 MACHINE DETAILS Psdpfxszf I Sce Aahegn Dimensions & Weight Dimensions (L x W x H): 4,633 x 2,394 x 2,110 mm Machine weight: 6,900 kg

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: G1115-0025, turning length: 2,100 mm, turning diameter: 610 mm, spindle speed (max.): 1,500 rpm, bar diameter (max.): 165 mm, controller model: Fanuc i Serie, The machine is new and has no operating hours! TECHNICAL DETAILS Turning length: 2,100 mm Maximum turning diameter: 610 mm Y-axis travel: 150 mm Spindle Speed: 1,500 rpm Maximum bar diameter: 165 mm Torque: 2,990/2,459 Nm Spindle nose: A1-15 Spindle bore: 21" 2-speed geared spindle Tool turret Tool positions: 12 x BMT 75 Speed of driven tools: 4,000 rpm Axes and tailstock Podezdztdopfx Aahegn Tailstock: MT #6 Tailstock stroke: 120 mm C-axis available MACHINE DETAILS Control model: Fanuc i series Power: 45/37 kW EQUIPMENT C-axis Steady rest optional

Condition: used, Year of construction: 1996, turning diameter 320 mm turning length 1100 mm control Fanuc Pgsdpfx Aaeyg Rbdjhen

Condition: used, Year of construction: 2010, greates pass round over bed 700 mm swing diameter over slide rest 380 mm max. turning diameter 410 mm control HEIDENHAIN - 4290 max. Spindle speed 5.000 U/min. centre distance 975 mm travel -x axis 300 mm travel -y axis 120 (+/- 60) mm travel -z axis 850 mm numbers of positions in the tool changer 12 tool taper VDI40 CNC Turning- and Milling Center | DMG - CTX 800 Beta equipped with a turret for driven tools, SCHUNK lathe chuck (Ø 315 mm) as well as tailstock and chip conveyor. An extensive tool package is in the Scope of delivery includes. Pgodozhpagjpfx Aahen The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX800beta | CTX800 beta | CTX-800

Condition: excellent (used), Year of construction: 2010, chuck diameter 210 mm max. swing diameter over bed 500 mm swing diameter over slide rest 290 mm turning diameter 200 mm centre distance 700 mm turning length 500 mm travel -y axis 80 (+/-40) mm travel -x axis 190 mm travel -z axis 525 mm spindle bearing diameter 100 mm bar capacity 65 mm spindle bore 73 mm spindle turning speed range 6000 U/min turret (x-stations) 12 Podjzhpamjpfx Aahegn work piece power 4,18 kW speeds of tool 5000 U/min VDI 30 control Siermens 840D total power requirement 20 kW weight of the machine ca. 4,3 t dimensions of the machine ca. TBH 2,2 x 4,5 x 1,82 m Very well-maintained machine from a training workshop that has closed down. Power-on hours: 14,944 h. Spindle hours: 2,233 h. Includes current measurement report (available upon request) Includes Y-axis Includes C-axis Includes approx. 10 tool holders (including 2 driven units: EWS axial/radial) Includes SMW 3-jaw chuck Includes tailstock center Includes tool probe arm Includes chip conveyor Includes parts unloading arm with conveyor belt Includes coolant system Includes documentation

Condition: ready for operation (used), Year of construction: 2003, spindle speed (max.): 12,000 rpm, travel distance X-axis: 505 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: OKUMA, controller model: OSP-U100L, number of slots in tool magazine: 44, number of axes: 6, This 6-axis Okuma MacTurn350-W was manufactured in 2003. It features a Z-axis travel of 1900 mm and a spindle speed of 12,000 RPM. The machine is equipped with an automatic tool changer that holds 44 tools and is ready for robotic integration. If you are looking to get high-quality turning and milling capabilities, consider the Okuma MacTurn350-W turn-mill centre we have for sale. Contact us for further details. • Y-axis: yes • Through-spindle coolant (water) • Lower turret: no live tooling Pgjdpjzhnb Aofx Aahen • Simultaneous machining: not available • Auto door • Robot interface: ready Additional equipment • SMW chucks: 10" and 8" to be supplied • Note: chucks currently installed on the machine are not included Technical Specification Counter Spindle Yes Driven Tools No Taper Size HSK 63 Through-spindle Coolant Yes

Condition: excellent (used), FANUC 0i TC control Turning diameter 520 mm Turning lenght 1090 mm Psdpfx Ajzhmydeahogn Spindle speeds -3'500 rpm Turret tool holder 12 Positions Chip conveyor Misc.accessories MARCELS MASCHINEN CH

Condition: excellent (used), With C-axis With driven tools FANUC 21i TB Manual Guide control Turning diameter max 355 mm Turning length -1330 mm Spindle speeds -2'800 rpm Top turret tool holders 12 driven positions Misc. accessories Pgodpfezhmnbox Aahsn MARCELS MASCHINEN CH

Condition: excellent (used), With sub-spindle With C-axis With Y-axis FANUC 18i TB Manual Guide control Turning diameter max 280 mm Pgjdozhmi Sepfx Aahsn Turning length -400 mm Spindle speeds -6'000 rpm each C-axis dividing 0.001 ° Spindle taper ASA A2-5 Top turret tool holders 12 driven positions Barloader Piece catcher attachement Chip conveyor Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Top slide, top slide, dovetail guide, tool slide, cross table, support slide, support beam, tool clamp, tool holder, tool mount, centering clamp -Tool clamp: Centering clamp, tool holder -Hole: Ø 58 mm Pgedjzhl Dbopfx Aahen -Dimensions: see photos -Dimensions: Ø 125 x 125 mm -Weight: 5.7 kg

Condition: good (used), Year of construction: 2001, Used lathe from Chevalier Psdpfjzhlw Uox Aahegn Type: FCL 32120 F Max. turning length: 3000 mm Turning diameter above the bed: 815 mm Turning diameter above the carriage: 470 mm Bore: 134 mm Fagor graphical control system Tool post included Year of manufacture: 2001

Condition: excellent (used), Year of construction: 2019, SMEC SL2500M cnc lathe with C-axis Year: 2019 DESCRIPTION Control Siemens 828D Swing over bed 650 mm Swing over cross slide 480 mm Max. turning diameter 405 mm Max. machining length 497 mm Spindle speed 3500 rpm Spindle nose ASA A2-8 Draw tube ID 77 mm Spindle bore diameter 86 mm Spindle motor (Cont./Max) 15/18.5 kW Travels X-axis travel 245 mm Z-axis travel 540 mm X-axis Rapid traverse rate 24 m/min Z-axis Rapid traverse rate 30 m/min Turret number of tool stations 12(24) (BMT65) Turning tool shank size 25 mm Boring bar diameter 50 mm Turret index time(next station swivel time) 0,2 sec Rotary tool speed 5000 rpm Rotary tool motor (Cont./Max) 3.7/5.5 kW Tailstock Quill diameter 110 mm Quill stroke 100 mm Tailstock taper MT5 Machine Size (with Side Chip conveyor) L×W×H 3125(4230) × 1610 × 1937 mm Coolant tank capacity 175 Liter Accessories/options: 2 pieces radial driven tool holder, BMT65 2 pieces axial driven tool holder, BMT65 parts catcher tool measuring arm swarf conveyor coolant tank documentations remote control Pgedpfx Aaoygt Dzjhon foot pedals for chuck and tailstock Under power in our warehouse!

Condition: used, Year of construction: 2014, CNC lathe, 2 axes, Victor V-turn A20 (SV), Taiwan Year of manufacture: 2014 Control system: Fanuc OiTD with Manual Guide Chuck diameter: 210mm Spindle bore: 52mm Tool turret: 12 positions, VDI30 Turning length: 600mm Turning diameter: 390mm Maximum spindle speed: 5000 rpm Measuring probe: Renishaw Tailstock: MT4 Interface for bar feeder Pjdpfozhk Uxex Aahogn Chip conveyor Coolant tank with pumps Documentation