Used angular window machining centers for sale (31)

Condition: used, Year of construction: 1998, functionality: unexamined, machine/vehicle number: 83406, Window machining centre Weinig Unicontrol 10, year of manufacture 1998 Kodpoy Sxlpofx Aktedl

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Unicontrol 12 Consisting of: Cut-off unit (item A), Tenon and slotted spindle (item C), Transfer belt (Pos. I), profiling spindle (Pos L), profiling spindle (Pos. N), Profile shaving unit vertical right (Pos. P) For the production of individual parts and elements in frame-by-frame or serial production. Consisting of a cross processing unit and a longitudinal processing unit connected to a transfer belt. Working width 40-140mm (See pressure ruler left 40 - 140 mm) Working height 40-120mm Workpiece length min. approx. 275 mm + 1 x end profile length Long machining: approx. 220 mm + 2 x end profile length Workpiece length max. 3500 mm The part dimensions depend on the machine equipment, production type and tool assignment. A final definition of the part dimensions is only possible after receipt, inspection and approval of the complete and final layout drawings. Ksdjumci Sspfx Aktedl Cross machining: Table feed Motor power 0.3 kW (0.4 HP) Pre-set feed speed for cutting, profiling and return 3-25 m/min Vario table with (studio window production possible) The clamping length of all tenoning and slotting spindles can be used without a tool blank. Workpiece clamping by means of a clamping bridge. Operated by a clamping cylinder installed under the table. NC-controlled long fence mounted on the slotting table. Studio window device Swivel angle max. +/- 75° The minimum workpiece length for slanted windows depends on the angle and the width of the wood. Possible part dimensions for slanted window production Angle Max. Min. Working width Workpiece length +/-75° 80 mm 800 mm +/-70° 120 mm 490 mm +/-60° 240 mm 360 mm +/-90° 350 mm 185 mm For angles greater than 60° only counter processing Commission not documented 1)NC automatic angle adjustment for machining angled parts Splinter protection by means of overtravel counter Over the entire spindle length of the tenoning and slotting spindle for 90° machining Manually trackable counter-rail for angled part machining 2) Additional counter-rails

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, WEINIG Unicontrol UC 10-5 Window Production Machine 1. Electronically controlled crosscut saw with laser switching between saw cutting and zero-point wheel, 3 kW motor 2. Grooving spindle 50 x 630 mm for tools 6 x 80 mm, 15 kW motor 3. Longitudinal/synchronous profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 4. Grooving spindle (between 1st and 2nd lifting spindle), D = 40 x 40 mm, axially indexed, 3 kW motor 5. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 6. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 7. Clamping spindle 40 x 150 mm, 3-position axial cycle, 2-position radial cycle, 3 kW motor Saw and grooving spindle on the right side, 3 kW motor Hardware spindle 40 x 150 mm, 3 kW motor Adjustable feed speed 6-12 m/min, 1.1 kW motor 4-position counter changer Kdjdpfxsxmr N Ie Aktel Electronic length stop, 3600 mm Workpiece return system with automatic rotating mechanism Automation package Interval-controlled sash support Double parts package Laminated fabric tables (for sanded surfaces) Pressure guide on the left, max. wood width difference 100 mm Machine in very good technical and visual condition

Condition: used, The machine is for sale together with all tools as shown in the pictures. Ksdpfx Aey Rumtoktedl

Condition: good (used), Year of construction: 2001, functionality: fully functional, GUBISCH Centromat CW3 Used machine for window and door production with 50 mm Ø spindles in longitudinal profiling The following parts have already been replaced: Energy chain and electrical wiring to the slot table; Sound insulation mats in the covers; Pneumatic hoses; Bearing for counter disk; Gluing side in the longitudinal area; Rotary encoder for second slot spindle; Bearing for slot table; PC has been cleaned and checked; Various pneumatic cylinders; V-belt. Kdedpfx Asxgqlujktsl

Condition: used, Year of construction: 2000, Storage location: Nattheim Kodpfjvwdmwjx Aktedl

Condition: used, Year of construction: 1985, Weight: approx. 3000 kg Dimensions: approx. 3700 x 2000 x 1600 mm Storage location: Nattheim Kdedpsvvi Ttefx Aktjl

Condition: good (used), Code: 0321 Brand: SCM Model: MULTIFLEX C - CE Standard Automatic working center for window frames for tenoning, profiling and contouring - Max workpiece thickness mm 140 - CE Standard Technical data Kdedeytn U Ispfx Aktol Automatic carriage with chipbreaker Max working length 2800 mm Min/max workpiece thickness 30/140 mm End cutting saw diameter 400 mm - Motor Hp 4 Tenoning spindle useful length mm 320 - Motor Hp 10 Spindle diameter mm 50 Max tool diameter mm 350 Profiling spindles: 1° Anti-splinter profiling spindle length 320 mm - Motor Hp 7,5 - Tool diameter mm 220 2° profiling spindle length mm 320 - Motor Hp 7,5 - Tool diameter mm 220 Min and max diameter of profiling spindles tools mm 100/220 Profiling spindles diameter 50 mm Tool group Zuani Variable speed feed Glazing bead recovery group - Motor Hp 3 - Diameter of suction mouth mm 50 Overall dimensions mm 2400 x 3300 x 2000 h Weight kg 2200

Condition: used, Year of construction: 1993, Tools IV 68, 78, and preservation protection. Tenoning and slotting spindle – 3 tools Motor 7.5 kW Profiling spindle – 3 tools Kedpfx Aoy Hrrxektsdl Motor 5.5 kW

Condition: used, Tenoning spindle 1 St. Number of milling agregates 1 St. Spindle diameter 40 mm Small-scale window manufacturing consisting of: Ksdpoxa Hi Njfx Aktsdl ----- 1) Haberkorn FZS1 slotting machine. Price: €12,500 2) Okoma SF3F table milling machine with glazing bead saw. Price: €4 Oertli tooling for the Haberkorn and Okoma machines. Price: €7,500 1 set of wooden windows IV 68/78/88 and 1 set of wood-aluminum windows IV 68/78, manufactured in 2011 4) Götzinger OBM Plus corner hinge and olive drilling machine, Maco MultiMatic hardware. Price: €7 (Hardware can be converted for an additional charge upon request!) ----- Technical Manufacturer's Description: - Haberkorn FZS1 slotting machine with automatic feed, - Stepless height adjustment D 40 mm Crosscut saw: - Spindle arrangement: top - Three-phase motor: 3 kW - Spindle diameter: 30 mm - Speed: 2800 rpm - Saw blade diameter: 400 mm - Automatic brake with speed monitoring - Pneumatic horizontal positioning, manually adjustable - Guard and dust extraction hood with extraction port diameter: 100 mm Slotting spindle D 40 mm: - Power: 7.5 kW - Speed: 4200 rpm - Working length: 252 mm - Maximum tool diameter: 340 mm - 220 mm stroke, stepless height adjustment via Precision ball screws - Guard and dust extraction hood with extraction port diameter: 180 mm - Automatic brake with speed monitoring Studio table: - Swivel range +/- 65 degrees - Automatically changing counterweight (programmable) - Pneumatic clamp - High-precision electric degree indicator - Automatic length compensation - Counterweight at every angle setting in the cutting plane Optional equipment: - Laser for workpiece positioning - Pneumatic saw position - Length stop LA 2500 mm + 1850 extension ----- 2) Okoma SF3F table milling machine with lifting spindle, 3 tools - Dust extraction ports 2 x 120 mm - Spindle length 270 mm - Counter gauge with fine adjustment and turret - Triple stroke, maximum stroke height 90 mm - Glass strip cutting saw with protective and extraction hood, 80 mm diameter - 8-roller feed unit with stand and hold-down arm, required for the glass strip cutting saw attachment - Pneumatically controlled dispensing unit for edge drive, speed 6000 rpm - 2 x 3 kW motors - Mounting diameter 30 mm ----- 3) Oertli tools for Haberkorn and Okoma machines - 1 set of wood window IV 68/78/88 - 1 set of wood-aluminum window IV 68/78 Tools are sold in the condition, scope, and with accessories as currently available in our stock. Note regarding window cuts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems mentioned and drawn. [Note regarding window cuts, tool drawings, and tool system listings:] ----- 4) Götzinger OBM Plus Corner Hinge and Olive Drilling Machine -Corner and scissor hinges + handle olive drilling -Vertical drilling unit with: -Quick-change drill head device -Pneumatic feed via foot valve -1x Olive drill head 24 mm -1x Double-head corner hinge -Maco MultiMatic fitting -1x Adjustable flip stop, left, with 6 stops -1x Adjustable flip stop, right, with 6 stops -1x Machine stand complete with storage tray -220/400 V, 60 Hz, 1.3 kW -1x Roller conveyor appr...

Condition: good (used), Year of construction: 1980, well-preserved slotting machine from the reputable manufacturer Okoma, with 40 mm spindle Kjdoxvllzjpfx Aktedl

Condition: excellent (used), Year of construction: 1992, beautiful machine in good condition as it came from a small business with little use. with IV 68 tool Kodpfeu S Afcox Aktjdl is still in operation ready for demonstration

Condition: excellent (used), WEINIG Window Production Line, Unicontrol 6, S/N 035-823, year 1997 Kdsdpfx Akey Dud Eotsl Crosscut saw, pneumatically indexed (3 kW) with laser alignment light Slotting spindle 50 x 320 mm for 4 tools at 80 mm each – 11 kW motor Parallel spindle 50 x 120 mm – 7.5 kW motor Longitudinal profiling spindle 50 x 320 mm for 4 tools at 80 mm each – 11 kW motor Fitting spindle, pneumatically indexed, 40 x 160 mm – 3 kW motor Saw/grooving spindle, horizontal top, pneumatically indexed – 3 kW motor Feed speed adjustable from 6–12 m/min – 1.1 kW motor Screen control for 99 window types Support bar for muntin production, pneumatically indexed Studio window setup with digital angle display Length stop up to approx. 3,500 mm Corner jointing unit with support rail Return conveyor to operator side Machine complete with operating manuals, circuit diagrams, spare parts lists LEITZ tool set, IV-78 THE SYSTEM IS IN VERY GOOD TECHNICAL AND COSMETIC CONDITION Delivery: EXW Delivery time: Prompt by arrangement Inspection: By appointment Payment: Upon notification that the goods are ready for dispatch Subject to prior sale and errors excepted.

Condition: used, Year of construction: 2004, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm # 6726 Weinig Unicontrol 12 CNC ----- Sale on behalf of a customer. Machine connected and ready for demonstration. Including used window tools for Unicontrol 12, OERTLI for various wood thicknesses ----- Brief Summary: ----- - 2 x tenoning spindles each 640 mm length, CNC controlled - "Vario-Table" - 3 x profile spindles each 400 mm length, CNC controlled - FItting spindle + grooving units (top and bottom) - Includes used window tools for Unicontrol 12, OERTLI programmed and set up for various wood thicknesses and systems (see pdf attached). Detailed Description: ----- crosscut saw ----- Crosscut saw electronically, horizontally infinitely adjustable Number of tools: 1 pc. Spindle speed: 3000-6000 rpm Spindle diameter: 40mm Tool diameter max.: 400 mm Motor power: 3 kW Laser guide light to identify the saw section rounding aggregate ----- Position: horizontally below Motor power: 1 kW Spindle diameter: 20mm Spindle speed: 9000 rpm Tool flight circle max.: 130 mm electronic length stop, length: 3500 mm ----- 1. tenoning Spindle Kedpfoyyqm Isx Aktodl ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 2. Tap and Slot Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 1. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 2. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 3. Profiling spindle ----- Position: horizontally above Tool clamping length: 40 mm Spindle speed: 9000 rpm Spindle diameter: 40mm Tool flight circle max.: 130 mm Motor power: 3.7 kW 4. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Hori...

Condition: used, Year of construction: 2004, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm control CNC, Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table ..... The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate ..... > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic length stop ..... > Length 4500mm 1. Tap and Slot Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered 2. Tap and Slot Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered transfer tape ..... Included for transferring the parts to longitudinal processing Separation of double parts before entering longitudinal processing. 1. Profiling spindle (synchronous and counter-rotating) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing Ksdpfx Akjyrtzkotedl > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 3. Profile milling unit (grooving device from above) ..... > Position: horizontally above > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 30 mm NC axis, stepless > Radial adjustment range 125 mm NC axis, stepless > Spindle speed: 9000 rpm > Tool flight circle max.: 130 m...

Condition: used, Year of construction: 2006, Tenoning spindle 2 St. Number of milling agregates 5 St. Spindle diameter 50 mm SCM Windor 40 R window production centre, manufactured in 2006 ----- This machine is part of the sale of a complete window manufacturing operation, see stock number 1305-6979. Machines still connected and ready for demonstration Technical Summary: ----- - 2 long CNC-controlled slotting spindles - Optima 16: Drilling units for face and longitudinal drilling - ROTATEN: Angled window attachment Kdjdjyn R Imepfx Aktsl - 3 long CNC-controlled profile spindles + top and bottom unit - Rebating carriage for small sashes - Workpiece return Options with additional costs: ----- - Used Leitz window and door tools for SCM Windor 40 R. Price: €10,000 - Separate OKOMA UF 3 rebating machine with compatible tools for SCM Windor 40 R systems. Price: €2,000 - Used chip extraction and filtration system for SCM Windor 40 R (See attached PDF for more information). Price 5.500 Euro (Technical specifications according to the manufacturer, without guarantee!)

Condition: good (used), For sale: small angle line FUNK. Crosscut saw with turret stop, 40 mm grooving spindle with double stroke, 40 mm rebating device with double stroke and large feed unit, glazing bead saw, additionally with IV68 window tooling set. Kodpeyuw Tisfx Aktodl

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm # 2809 Weinig Unicontrol 6 ----- Technical Data Summary (Please inquire about any additional accessories included) Item 1: Cut-off saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide light for identifying the saw cut CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned cut-off saw Item 2: Tenoning spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (Stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3000 rpm > Maximum tool swing diameter: 320 mm > Spindle diameter: 50 mm > Maximum tool diameter: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (co-rotation and conventional) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: Vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glass-dividing muntins) Munch guide consisting of: Munch support strip from above in the area of ??the vertical right-han d profile milling unit and profiling spindle. Item 5: Horizontal top profile milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Spindle speed: 5,850 rpm > Maximum tool swing diameter: 130 mm > Axial travel: 52 mm, indexed in 2 positions > Radial travel: 125 mm, indexed in 2 positions Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: Vertical right > Tool clamping length: 160 mm > Axial travel: 90 mm, indexed in 3 positions > Radial travel: 100 mm, indexed in 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Maximum tool swing diameter: 210 mm > Motor power: 3.0 kW Further features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Rebating device for tear-out-free rebating > Double part package > Return conveyor for 1-person operation: swivel conveyor > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction nozzle diameter: ----- Crosscut saw 80 mm Tenoning spindle 140 mm Kdjdpfx Asxtvgkoktel Profile spindle 1 140 mm Profile spindle 2 140 mm Grooving device from above 80 mm Hardware spindle 120 mm ----- Price of The above-men...

Condition: used, device 10 spindle diameter 40 und 50 mm engine 1x15 kW, 4x11 kW, 5x3 kW Weinig Unicontrol 10 (UC 10) mitre saw for the production of windows, elements, and doors. Frame-by-frame, series production, or individual parts production with 2 tenon and slot spindles, including Oertli tool set - Aggregates: 1. Crosscut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and slotting spindle, NC axis, ø 50 mm, 15 kW, clamping length: 640 mm (8 x 80) mm 3. Second tenoning and slotting spindle, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Profile milling unit, horizontal from above, 3 kW Kodpfx Aev Ag Tdsktjdl 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Profile milling unit, vertical right, 3 kW 9. Profile milling unit, vertical right from above, 3 kW 10. Profile milling unit, horizontal from below, NC axis 3 kW - Double part package - Re-milling package with re-milling carriage - Automatic turning system - NEXUS PC control - CNC-controlled length stop - Studio window setup - Unit for edge rounding from below with crosscut saw - Rung support strip - Includes extraction pipe system - Includes Oertli tool set - Further technical data and tool drawings available on request.

Condition: used, Year of construction: 2005, functionality: fully functional, length stop: 3,200 mm, tool diameter: 400 mm, spindle diameter: 50 mm, spindle stroke: 640 mm, spindle speed (max.): 3,000 rpm, milling spindle length: 320 mm, saw blade diameter: 400 mm, height adjustment type: electric, type of input current: AC, working height: 130 mm, working width: 200 mm, SCM Windor 60/100 – Angle Processing Center Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System The system in question is a window and door production line of the type Windor 60/100 from the manufacturer SCM Group, built in 2005. It is a CNC-controlled angle processing center designed for the industrial machining of frame and sash components. The system is configured for series production and enables precise, repeatable machining in integrated process steps. 2. Main Components of the System 2.1 SCM Windor 60/100 Angle Processing Center The SCM Windor 60/100 features a modular design and is configured as an angle processing unit. Machining takes place on a tenoning side and a profiling side positioned at right angles to each other. The system combines several machining steps – such as milling, drilling, grooving, rebating, and tenoning – in a fully integrated, CNC-controlled process. Kodpfx Aox Nqqxoktedl Key Features: * CNC multi-sided machining * Multiple milling and processing spindles * Automated tool handling and changeover * High dimensional accuracy and repeatability 2.2 Fleximat Drilling Center The Fleximat drilling center is integrated into the system and is used for the precise execution of boreholes for joints and fittings. Machining is CNC-controlled with both vertical and horizontal drilling units. 2.3 Profiler Center The profiler center is designed for contour-forming milling operations and consists of two processing sides: Right side: * Lifting spindle with height adjustment * Suitable for variable profile and contour processing Left side: * 24-position tool changer * Automatic tool changing to minimize setup times * Suitable for complex profile milling 2.4 Löwer Surface Sanding Machine A surface sanding machine from Löwer is integrated into the production line. The machine is used exclusively for surface sanding, serving to improve the surface quality of the processed workpieces. 3. Control, Operation, and Safety The system is equipped with a CNC control unit that manages all machining operations, tool changes, as well as feed and spindle movements. Operation is semi- or fully-automated by trained personnel. The safety features are state-of-the-art as of the time of construction (2005) and include, in particular: * Mechanical guards and enclosures * Emergency stop devices * Safety locks on moving machine parts 4. Optional Expansion: SCM Topset XL Planer (10-spindle) For expansion of the existing machinery, provision has been made for a SCM Topset XL planer with 10 spindles. This machine will be operated as a standalone processing station at a separate location within the production hall and is not directly integrated into the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transportation are to be organized by the buyer. Available from 07.01.2026

Condition: ready for operation (used), Year of construction: 1988, Window manufacturing machine Manufacturer: Okoma Model: UF1 S Year of manufacture: 1988 with tool Kodpfxjyk Haqs Aktodl

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 used Weinig Unicontrol 6 window system ----- Manufacturer's description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transverse machining) controlled via selector switch on the control panel. Technical Specifications ----- Crosscut Saw ----- Number of Tools: 1 Spindle Speed: 2,800 rpm Spindle Diameter: 40 mm Kodox Tu N Hopfx Aktjdl Max. Tool Diameter: 350 mm Motor: 3 kW Mortise and Slot Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 3,500 rpm Spindle Diameter: 50 mm Tool Clamping Length: 320 mm Max. Tool Diameter: 320 mm Motor: 11 kW Profile Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 6,000 rpm Spindle Diameter: 50 mm Tool clamping length 320 mm Max. tool diameter 232 mm Motor 11 kW Special equipment: Synchronous spindle ----- Pneumatically timed forward/backward for tear-free rerouting of window sashes, frames, and doors. Spindle diameter 50 mm, 4 kW Tool clamping length 120 mm, zero tool diameter 112-140 mm Max. tool diameter 232 mm, spindle speed 6000 rpm Motor boost for synchronous spindle from 4 kW to 7.5 kW Screen control for 99 window types. One type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame-by-frame, series, rerouting. Data entry via keyboard with integrated operator guidance and error diagnostics. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm, with 10 x 4 mm key Clamping length: 13 mm Clamping length: 40 mm Axial stroke, 2 positions Radial stroke, 2 positions Max. tool diameter: 130 mm Grooving spindle motor boost from 2.2 to 3 kW 1 Fitting milling unit, right: ----- For milling fitting grooves in the circumferential milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the control panel. Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting radius: min. 140 mm, max. 180 mm Home position below table level: 10 mm Special design of the fittings milling machine: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial cycle, 2 positions Motor booster for the hinge milling spindle from 2.2 to 3 kW Hinge milling spindle for 230 mm tool diameters in and above the table Electric height adjustment of the feed with selector switch on the co...

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Kdjdpfx Aket R T Hcstel Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: used, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm control Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage ..... Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm Kdodpfxsx H Al Ne Aktol > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate ..... > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment path mechanically coupled with crosscut saw. > Radial adjustment pneumatically controlled on/off electronic length stop ..... > Length 4500 mm 1. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered 2. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered Transfer tape ..... Included for transferring the parts to longitudinal machining Separation of double parts before the start of longitudinal processing. 1. Profiling spindle (synchronous and counter-rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool fli...

Condition: good (used), working width 230mm working height 120mm spindle diameter 40mm 4 heads + unit for cutting glazing bead control from ATS panel head adjustment in two axes electric adjustment of the pressure beam smooth adjustment of feed speed Kdodsvtt Ayopfx Aktel The machine worked in line with other machines.