Center lathe

WEILER Condor B - Generalüberholt

Condition: used, Year of construction: 2003, centre height 255 mm centre distance 1.080 mm turning diameter over bed 500 mm turning diameter over slide 290 mm turning length 1.000 mm control EuroTurn spindle bore 70 mm spindle taper KK 8 DIN 55027 3-jaw-chuck diameter 250 mm bed width 360 mm Tedpswizltsfx Aqtsc turning speed range 2 - 2.800 U/min rapid travel - longitudinal/face 10 / 5 m/min quick change toolholder PARAT Gr. 2 drive capacity - spindle motor 11,0 kW taper in tailstock-quill MK 5 dia. of quill 80 mm quill stroke 160 mm voltage 400 V total power requirement 16,0 kVA weight of the machine ca. 3,0 t dimensions of the machine ca. 2,85 x 1,60 x 1,80 m - Serial-No.: 495 / 03 - control: EuroTurn - quick change tool holder PARAT - coolant equipment - machine lamp

Condition: new, Year of construction: 2022, IN STOCK -- The ARG 235 plus is a manual metal bandsaw with high cutting accuracy. This machine allows miter cuts from -45° to +30° continuously (swivel range left 45° and right 60°) Technical Specifications: Tsdpfx Asmftv Roqtsc ● Cutting range: - 90° round: 235 mm / square: 230 mm / rectangle: 280 x 180 mm - 45° Right round: 165 mm / square: 145 mm / rectangle: 185 x 180 mm - 30° Right round: 115 mm / square: 80 mm / rectangle: 115 x 80 mm - 45° Left round: 185 mm / square: 160 mm / rectangle: 185 x 100 mm ● Drive Power Saw Blade: 0,9 / 1,4 kW / 400 V / 50 Hz ● Saw Blade Speed: 40 and 80 m/min ● Saw Blade: 2710 x 27 x 0,9 Standard Equipment: ● Powerful saw blade drive ● Stepless adjustment of the cutting feed from the control panel ● Manual clamping of the workpiece, movable clamping stock with dovetail guide ● Easy adjustment of the saw for miter cuts by rotating the saw frame (stops at 45°, 60°, and 90°) ● 250 mm material stop without scale --> Also available in different sizes or versions!

Condition: used, Year of construction: 2000, used CONDOR AC, partially overhauled Centre height: 165 mm Between centres: 750 mm Spindle bore: 40 mm Spindle speeds: 22–2,800 rpm, infinitely variable Tedpsx E Um Nefx Aqtec - Quick-change tool post size B - WEILER DZ-V digital readout - Hollow spindle stop - Fixed steady rest - 7 Multifix tool holders - Flat splash guard - Electrically interlocked chuck guard - Change gears and various soft jaws The machine is partially overhauled: - Bed slide: guideways re-coated and hand-scraped, gibs and lower guide strips adjusted - Cross slide measured and aligned on bed slide; cross slide dovetail guide newly scraped, gibs adjusted and scraped - Top slide newly scraped and gib matched - All measuring scales overhauled and cables replaced The machine is located in our showroom at 71334 Waiblingen-Beinstein and is immediately available. For details on equipment, please contact us.

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,400 mm, table length: 3,900 mm, table width: 2,400 mm, warranty duration: 24 months, power: 37 kW (50.31 HP), OMAX 55100 TiltaJET, 37 kW EnduroMAX pump and TiltaJET for perfectly perpendicular cuts Factory-refurbished with manufacturer certification and a two-year warranty! The configuration of the waterjet cutting system can be freely selected. Feel free to contact us with your individual configuration requirements. Customers searching for efficient and highly precise waterjet cutting systems will find their solution within the OMAX premium line. These powerful and extremely precise machines combine operational flexibility with the highest precision in the waterjet cutting sector. The systems can be equipped with a comprehensive range of accessories tailored to your specific cutting tasks. OMAX waterjet cutting systems are revolutionizing tool and mold making as well as single-part and series production. They are also widely used in various areas of mechanical and plant engineering. Financing via leasing is available upon request under highly attractive conditions, e.g. for up to 86 months. - Accuracy up to ± 0.02 mm - Machine components and software are up to date with the latest OMAX technology Todpferm Imnsx Aqtec With the TiltaJET swiveling cutting head, the OMAX system achieves a cutting accuracy of up to ± 0.02 mm. The swiveling head automatically compensates for taper errors at the cut edge, regardless of the selected quality level or cutting speed. The machine is factory-refurbished; therefore, images may vary from the actual offer. Prompt delivery can be arranged with INNOMAX AG.

Condition: ready for operation (used), Year of construction: 2002, turning length 750 mm turning diameter 310 mm turning diameter over slide rest 175 mm spindle bore 32.0 mm tailstock quill taper MT 3 MK turning speeds 85 - 2200 U/min bed width 200 mm spindle taper DIN 55027 GR 5 total power requirement 2.2 kW weight of the machine ca. 710 kg range L-W-H 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college (!!) - in checked condition - machine videos - ?v=iqU7Bkh6INo ?v=aSViqjk51Ik Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - "NEWALL" digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) Tedpsxab Tpofx Aqtec * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindle speed 85 - 2000 rpm. - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 770 kg

Condition: like new (used), Year of construction: 2021, operating hours: 900 h, functionality: fully functional, Control: FANUC Series 32i Model B Swing over bed: 600 mm Max. turning diameter: 400 mm Max. turning length: 650 mm Spindle bore: D65 mm X-axis travel: 275 mm Z-axis travel: 700 mm C-axis: 0.001 degree Rapid traverses (X / Z): 15 / 24 m/min Spindle speed: 5,000 rpm Drive power: 34 kW Torque: 325 Nm Tool stations: 12 (all stations driven) Tjdpfszd Evcjx Aqtec Tool holder: VDI40 Speed of driven tools: 6000 rpm Weight: approx. 5800 kg Dimensions (L x W x H): 2800 x 1750 x 2090 mm Equipments, accessories: - Programmable C-axis - Driven tool turret - Chip conveyor - Coolant system - Static tool holders - Driven tool holders - Tool setter / Tool measuring arm - D200 mm hydraulic 3 jaws chuck - Tailstock - Manuals The machine is barely used and is in mint condition. Immediately available.

Condition: excellent (used), Year of construction: 1993, 1 used lathe with guide and draw spindle Manufacturer: Weiler Type: Praktikant 160 B Year of manufacture: 1993, with 3-axis digital display, very good condition, CE compliant Technical data: Center height: 160 mm Center distance: 650 mm Spindle speeds: from 24 to 2500 rpm Spindle bore: 40 mm Short taper spindle head, DIN 55027, size 5, with bayonet lock Tedjzq R Ecspfx Aqtec Tailstock: MK 3 Feeds: from 0.02 to 0.63 mm/rev Possible threads: metric, inch, module, and diametral pitch Metric thread pitches: from 0.25 to 8 mm Weight: approx. 680 kg Spindle brake can be engaged Length: 1.6 m, height: 1.25 m, depth: 0.7 m Accessories and equipment: 3-axis digital display The machine comes from a vocational training center and is in very good condition.

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Matador VS2 lathe, year of manufacture 1992, three-jaw chuck, Multifix, rear splash guard, electric chuck guard. The machine is in good working condition and can be demonstrated under power by appointment. Todjx Sqvgepfx Aqtsc

Condition: ready for operation (used), Year of construction: 2014, operating hours: 3,955 h, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, spindle motor power: 3,700 W, total width: 1,700 mm, overall weight: 1,400 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, product length (max.): 1,270 mm, number of axes: 2, Horizontal turning machine manufactured in 2014. This EMCO E25 features a maximum turning diameter of 85 mm and a maximum turning length of 225 mm. It includes a VDI 16 disk turret with 12 tool stations and a rapid traverse speed of 15 m/min in the X-axis. If you are looking to get high-quality turning capabilities, consider the EMCO E25 machine we have for sale. Contact us for further details. • Spindle motor power: 3.7 kW (5.5 kW at 40% duty cycle) • Spindle speed range: 60 - 6300 rpm (infinitely variable) • Feed Force: 3000 N / 3500 N • Rapid Traverse: 15 m/min / 24 m/min • Number of tool slots: 12 Tsdozk Ep Njpfx Aqtjc • Main electronic connection: 400 V (3/PE) • Power consumption: 6 kVA • Chip conveyor: Included • Swing over bed: 250 mm • Max. Turning Diameter: 85 mm • Max. Turning Length: 225 mm • Max. Bar Capacity: 25.5 mm • Distance between centers: 405 mm • Spindle Connection: Ø 70 h5 • Max. Chuck Size: Ø 100 mm • Max. Torque: 35 Nm • Turret Type: VDI 16 disk turret with directional logic • Tool Shank Cross-section: 12 x 12 mm • Coolant tank capacity: 140 liters • Sound pressure level: 78 dB(A) Optional We can also offer a bar loader from another customer for an extra amount. Technical Specification Through-spindle Coolant No Counter Spindle No Driven Tools No

Condition: new, Year of construction: 2026, CORMAK TYTAN 210 × 400 VARIO Universal Conventional Lathe (230 V) The CORMAK TYTAN 210 × 400 VARIO 230 V is a compact universal conventional metal lathe designed for precision machining in workshops, toolrooms, maintenance departments, and small manufacturing facilities. Featuring infinitely variable spindle speed control, a rigid machine construction, and extensive threading capabilities, it delivers excellent machining accuracy and everyday operating convenience. It is a reliable conventional lathe suitable for single-piece production, maintenance work, and prototype manufacturing. Powered by a 750 W motor combined with an electronic variable-speed drive, the machine provides smooth and stable performance even when machining demanding materials. The spindle speed range of 50–2,500 rpm allows operators to select the optimum cutting speed for both rough turning and precision finishing operations. Key Features Infinitely variable spindle speed from 50 to 2,500 rpm 750 W / 230 V motor providing smooth and reliable operation Rigid machine construction for high machining accuracy 4-way tool post for quick and convenient tool changes Capability to cut both metric and imperial threads MT3 spindle taper with 21 mm spindle bore Forward and reverse spindle rotation for increased versatility Hinged spindle safety guard for improved operator protection Integrated chip tray for easy cleaning and maintenance Standard Equipment Tedpfxjzqzi Eo Aqtsc 3-jaw self-centering chuck Internal and external chuck jaws Change gears for thread cutting MT2 dead center Oil can Chip tray Chuck key and tool post wrench Open-end wrenches and hex keys Spare fuses Operating manual CE Declaration of Conformity Optional Equipment Lathe stand 4-jaw independent chuck Tool holders Live centers Turning tools Tailstock drill chucks Technical Specifications Specification Value Swing Over Bed 210 mm Swing Over Cross Slide 135 mm Distance Between Centers 400 mm Bed Width 100 mm Spindle Bore 21 mm Spindle Taper MT3 Spindle Speed Control Variable Spindle Speed Range 50–2,500 rpm Metric Threads 14 Metric Thread Range 0.3–3 mm Imperial Threads 10 Imperial Thread Range 10–44 TPI Longitudinal Feed Range 0.089–0.198 mm/rev Tool Post Type 4-way Compound Slide Travel 65 mm Cross Slide Travel 80 mm Carriage Travel 276 mm Tailstock Quill Travel 50 mm Tailstock Taper MT2 Main Motor (S1/S6) 750 W / 1000 W / 230 V / 1 Ph / 50 Hz Machine Length 900 mm Machine Width 400 mm Machine Height 1120 mm Weight (with stand) 63 kg