Condition: used, A conventional center lathe is offered. Equipped with manual gear and feed selection, saddle, cross slide and compound slide, tool holder, tailstock with handwheel, rear splash guard, machine light and machine stand with chip pan. Inspection possible by arrangement. Bodpfx Ake Ahi Sxsneww

Condition: good (used), Year of construction: 2001, Machine is in good condition. Bjdpfsrpk Rmex Akneww Parts shown by hand not come. Cutting tools not come.

Condition: used, Technical details: spindle passage: 60 mm turning length: 45 mm turning diameter: max. 56 mm Bjdpfx Akou Iwyisnoww drill depth: max. 70 mm revolution per minute: 48 - 1500 (spindle) U/min threading: Drehzahl: 24 - 750 U/min tool turret - number of stations: 8 total power requirement: 5,5 kW weight of the machine ca.: 2,4 t space requirement of the machine approx.: L:2,1x1,0x1,8 m Cam-controlled automatic lathe according to template. Workpiece is clamped via clamping cartridge. Turret head: disk turret Hahn&Tessky Esslingen, tool path 80mm, adjustment 36mm, distance collet/turret head min./max.: 72/188mm 2 pieces turning support, working stroke 45mm 2 piece cutting off support, working path approx. 40mm Cooling water system Machine is not connected. Sale at a low selling price. *

Condition: used, Technical details: Bwjdpfxou Ixy De Aknew turning diameter over bed: 320 mm turning length: 800 mm centre distance: 800 mm centre height: 150 mm spindle bore of work spindle: 30 mm range of revolution per miute: 35 - 1500 / 16 step U/min range of feed in x - axis: 0,04 - 2,4 / 30 step m/min tailstock quill adjustment:: 125 mm tailstock taper MT: MK2 dimension machine xH: 1,7 x 0,8 x 1,5 m Equipment and other features: -3-jaw chuck Röhm 160mm -chuck guard -protection system WxH: 510x400mm -Multifix tool clamp (4 pieces) -Tip in tailstock -Upper slide swivels +/- 45°, maximum travel = 100mm -Cross slide travel = 300mm feed Pump for coolant device (without feed) *

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 500 mm turning diameter over support: 280 mm Bjdpfx Aju Ixznskneww turning length: 1500 mm centre distance: 1500 mm turning dia. in gap: 730 mm spindle bore of work spindle: 65 mm range of revolution per miute: 25-1250 / 32-1600 / 36-1800 - 18 step U/min feed:: 0,05 - 8,5 mm rapid motion - x-axis: 4 m/min rapid motion - y-axis: 1,26 m/min tailstock quill taper MT: 5 tailstock quill adjustment:: 200 mm total power requirement: ca. 8,2 kW weight of the machine ca.: 2,5 t dimension machine xH: 3,2 x 1,3 x 1,5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 - 2.8 mm (clutch end position switching not functional, manual switch-off necessary) Top slide with 4-fold tool holder Steel plate Ø 705mm with offset threaded holes *

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 400 mm turning diameter over support: 220 mm turning length: 1100 mm centre height: 180 mm spindle passage: Ø 45 mm range of revolution per miute: 31,5 - 1.400 / 12 step U/min range of feed in x - axis: längs: 0,08 - 1,10 m/min range of feed in y - axis: quer: 0,028 - 0,40 m/min tailstock quill taper MT: MK4 tailstock quill adjustment: 200 mm total power requirement: 4,0 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,5 x 1,1 x 1,4 m Equipment: -Three-jaw chuck Ø 250mm manufacturer Forkardt with interchangeable jaws Bedpfxju Ix E He Aknsww -Multifix steel holder -Cooling water device with pump -chuck guard -chip collecting tray -chip guard Accessories: -chuck spanner -tool holder -2 pieces gears *

Condition: used, Year of construction: 1951, Technical details: turning diameter over bed: 400 mm turning diameter over support: 240 mm turning length: 1100 mm centre height: im Bett gemessen: 190 mm spindle passage: 40 mm range of revolution per miute: 37,5 - 950 U/min total power requirement: 3,5 kW tailstock quill taper MT: MK 4 tailstock quill: 180 mm weight of the machine ca.: 1,6 t Bwodpfx Aou Ix Hdoknow dimension machine xH: 2,6 x 1,4 x 1,3 m The lathe is equipped with threading device. It is rewired and a new control cabinet is made. Emergency stop switch and chuck protection 3-jaw chuck Ø 250mm rotating tip Tool support quadruple steel holder tool support approx. 30° right/left swiveling 4 Stück Wechselräder Copying device (taper 15° right/left) *

Condition: used, Year of construction: 1986, Technical details: turning diameter over bed: 315 mm turning diameter over support: 200 mm turning length: 500 mm turning diameter over bed: 315 mm swing diameter over face slide: 200 mm center height measured in bed: 180 mm spindle passage: Ø 32 mm range of revolution per miute: 56...2.800 / nur only 6 step links-rechts U/min range of feed in x - axis: längs: 0,02..0,8 m/min range of feed in y - axis: plan: 0,01..0,4 m/min Bwodpfx Akou Ix Hqsnjw tailstock quill taper MT: MK 4 tailstock quill adjustment:: 140 mm total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,1x 1,1 x 1,4 m -Workpiece pick-up via collet chuck -travels longitudinal slide= 580mm and cross slide=170mm -incl. tooling device lathe support -incl. change gears -steady rest Ø 100mm -fourfold tool holder The machines functionality is limited ! 6 speeds are currently selectable! (224/1800 ; 280/2240; 355/2800 rpm.) i.D. *

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 610 mm turning dia. over face-slide: 350 mm swing diameter over bed: 610 mm centre distance: 1390 mm control: Fanuc 0i-Mate TC x-axis: plan: ca. 305 mm z-axis: längs: ca. 1350 mm revolution per minute: 22 - 2200 U/min feed:: X + Z-Achse: 5 / 10 m/min. spindle bore: Ø 70 mm Bwedpfx Aju Ix I Usknsw tool turret - number of stations: 6 tailstock quill taper MT: MK5 tailstock quill stroke: 150 mm Weight approx.: 2,7 t total power requirement: 15 kW dimension machine xH: 3,7 x 1,7 x 1,7 m dimensions of hydaulic: 630 x 460 x 900 mm other features: -hydr. chuck TONFAU Ø 300mm -hydraulics -Coolant system -control panel -double foot switch accessories: -div. mold jaws -div. soft jaws -6 footrests *

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 180 mm turning length: 490 mm swing diameter: 450 mm cross travel: Z-Weg: 168 mm Bwodpfxou Ix N So Aknow control: Traub TX8D revolution per minute: 20 - 4000 U/min spindle passage: Ø 60 mm operating hours - idle run: 23.495 h tool turret: 12 tools total power requirement: 38 kW Weight approx.: 4,2 t dimension machine xH: 3,6 x 2,5 x 2,2 m Tool holder straight shank DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200mm hydraulic clamping Operation via double foot switch and control panel/operating panel. Coolant device The Traub carries an integrated chip conveyor with an ejection height of 1,100mm (currently without function). Accessories: multiple small parts 8 x machine feet without tailstock i.D. *

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler Bwodjvvtpxopfx Aknjw With hinged chip conveyor Chip tray Compressed air gun The machine has NO lathe chucks on sale as is! *

Condition: used, Year of construction: 2007, Technical details: turning diameter over bed: 762 mm turning length: 850 mm facing movement (x-axis): 287 mm longitudinal traverse (z-axis): 864 mm Bjdpfx Aksvvt Emsnjww control: CNC Haas spindle passage: 76 mm revolution per minute: max. 3400 steples U/min tailstock taper ISO: Ø 290 tailstock quill stroke: ja mm tool turret - number of stations: 12 electrics - voltage/frequency: 360/ 400 V - 50-60 Hz V/Hz Weight approx.: 6,3 t transport measurements machine: ca. 3,4 x 2,1 x 2,4 m Equipment: 3-jaw power chuck KITAKAWA Ø 250 mm (without jaws) 4200 rpm. Operable via 2-position foot switch. Tool turret with powered tools available. Electric coolant system provided. Tool measuring system available. I.D. *

Condition: used, Year of construction: 2007, spindle speed (max.): 4,000 rpm, travel distance X-axis: 310 mm, travel distance Z-axis: 605 mm, CNC Lathe Manufacturer: MAZAK Model: Multiplex 6300 Year of manufacture: 2007 Control: MAZATROL 640T Technical specifications: - Swing diameter: 430 mm - Distance between spindles: 1450 mm - X-axis: 310 mm Bodpfx Aeyb S Nrjkneww - Z-axis: 605 mm - Spindle speed: 4,000 rpm Equipment & accessories: - Gantry loader In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: like new (used), Year of construction: 2010, operating hours: 14,010 h, turning length: 800 mm, turning diameter: 430 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 455 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 6,000 rpm, feed length X-axis: 455 mm, feed length Z-axis: 430 mm, workpiece weight (max.): 5 kg, total height: 8,500 mm, total length: 2,500 mm, total width: 2,495 mm, overall weight: 8,500 kg, CNC controller: Fanuc FS31IA5 (MAPPS 4) Capacity Turning length mm: 800 Max. turning diameter mm: ø: Ø430 Turn-mill spindle X-axis travel mm: 455 Z-axis travel mm: 800 B-axis degree: ±120 (0.001º) Speed spindle rpm: 12000 Drive power kW: 9/5.5 Y-axis travel mm: ±105 Tool magazine Magazine places: 76 Tool holder: Capto C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Lower turret X-axis travel mm: 160 Z-axis travel mm: 730 Number of tool slots St .: 10 Main spindle Speed spindle rpm: 6000 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 7.5/5.5 Chuck type: Solid Chuck (8") Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Coolant gun Bjdpfxey Rpq Ts Akneww Working time hours Under power: 76482 Spindle 1: 14010 Spindle 2: 4306 Potencial nominal kVA: 48 Basic machine dimensions / weight Length mm: 2500 Width mm: 2495 Height mm: 8500 Weight kg: 8500

Condition: used, Article: quadrant lever Manufacturer: Schütte Bsdpfjyn Aazex Aknoww For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, pickoff with shaft for Schutte multi spindle automatic lathe SF67, used pickoff C26GF Bwsdpfx Akoyn Aa Ijnow pickoff shaft C26GF9S1 gear WG-67S Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Article: profile turning trip dog Manufacturer: Schütte Bwjdpfx Akoyn Aa Ujnow Many different sizes for Schütte profile turning attachment 68AE Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2009, controller manufacturer: Fanuc, controller model: 30i (MSX-711), _____ Description: Year of manuf. : 2009 Control : Fanuc 30i (MSX-711) Turning diam. : 920 mm Turning length : 1800 mm In General: Year of manufacture:2009 Control system:Fanuc 30i (MSX-711) Max. turning diameter:920 (470) mm Turning length:1,800 mm Bar capacity:103 mm Milling spindle:8,000 rpm, HSK 100 Main spindle: RPM:2,400 Max. power:37 kW Max. torque:1,432 Nm C-axis:0.001° Chuck:SMW Autoblok KNCS 500-155 Sub spindle: RPM:2,400 Max. power:37 kW Max. torque:1,432 Nm C-axis:0.001° Chuck:SMW Autoblok KNCS 500-155 Tool carrier I (X/Y/Z/B): Technology:Traveling column with milling spindle Milling spindle:8,000 rpm Power:30 kW Torque:302 Nm Tool holder:HSK 100 X-axis:1,040 mm Y-axis:510 (+/- 255 mm) mm Z-axis:1,940 mm B-axis:+/- 120°, index 1° Tool carrier II (X/Z): Technology:Cross slide with tool turret Tool drive:6,000 rpm, 40 Nm Number of stations:10 X-axis:267 mm Z-axis:1,830 mm Tool magazine: Technology:Chain magazine Bwjdpfxs Ad Uhro Aknsw Tool changer:Double gripper Number of stations:80 Max. tool diameter:120 mm (250) Max. tool length:600 mm Equipment: Chip Removal:Chip Conveyor Coolant Supply:High pressure pumps Workpiece Measurement:Renishaw RMP 60 Emulsion Mist Separator:Electrostatic Setup:Electronic Handwheel Chuck:2x SMW Autoblock KNCS 500-155

Year of construction: 2023, operating hours: 4,500 h, condition: excellent (used), turning diameter: 670 mm, bar passage: 102 mm, spindle nose: JIS A2-8, spindle speed (max.): 3,000 rpm, tool length: 400 mm, turning length: 1,519 mm, CNC turning and milling center Manufacturer: DMG MORI Model: NTX 3000/1500 Year of manufacture: 2023 Control: DMG Mori Celos with Fanuc F31iB5 Technical specifications: Max. turning diameter: 670 mm Turning length: 1,519 mm Bar capacity: max. 102 mm Travels: x1-axis: 675 mm y-axis: +/- 150 mm z1-axis: 1,562 + 164 mm b-axis: +/- 120° a-axis: 1,542 mm x2-axis: 200 mm y2-axis: +/- 40 mm z2-axis: 1,542 mm Main spindle: Max. speed: 3,000 rpm Drive power: 30/25 kW Torque: 1,194/995 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 111 mm Counter spindle: Max. speed: 4,000 rpm Drive power: 18.5/18.5/15 kW Torque: 599/505/409 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 91 mm Milling spindle: Speed range: 0 – 12,000 rpm Drive power: 28/23 kW Torque: 132/95.3 Nm Tool holder: Capto C6 Number of tool stations: 76 positions Max. tool diameter: Ø 70/Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Turret: Number of tool holders: 12 positions Speed of driven tools: 12,000 rpm Tool holder: BMT40 Torque: 16.9 Nm Rapid traverse speeds: x-axis: 50 m/min y-axis: 40 m/min z-axis: 50 m/min a-axis: 36 m/min x2-axis: 25 m/min y2-axis: 18 m/min z2-axis: 40 m/min b-axis: 100 rpm Operating hours: approx. 4,500 h Spindle hours: approx. 2,200 h Technical features & accessories: Bedpe Agr Dgsfx Aknjww − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-400-128 incl. hollow clamping cylinder for main spindle − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-260-78-3Z incl. hollow clamping cylinder for counter spindle − Foot switch for chuck operation − Automatic clamping stroke monitoring of the clamping cylinder for main and counter spindle − Tailstock function for counter spindle − Magazine-side control panel for the tool magazine Further technical specifications and accessories can be found in the attachment “Photos and Data”. Accessories, illustrated tools, and clamping devices are only included if specified in the additional information.

Condition: good (used), 4 – Chuck Jaws Stock number: Manufacturer: Röhm Origin: from VDF machine Diameter: 315 mm Mounting: 4 bolts Pitch circle diameter of the screw connection: 135 mm Through hole: 105 mm Height without screws: 180 mm Height with screws: 240 mm Accessories: Rotating chuck jaws, for centric clamping Bodo Agl U Ejpfx Aknjww Weight: 67.5 kg

Condition: good (used), Manufacturer: unknown Diameter: 400 mm Mount: KK 105 mm Fastening: 4 screws Bolt circle: 135 mm Through-hole: 100 mm Height without stud: 155 mm Height with stud: 205 mm Bjdpfe Aglwgex Aknjww Accessories/Features: Jaws can be individually clamped and rotated Weight: 65 kg Dimensions: 400 x 400 x 165 mm

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 16212-51, turning length: 1,300 mm, turning diameter: 400 mm, spindle motor power: 68 W, total height: 2,900 mm, total length: 6,391 mm, total width: 2,495 mm, overall weight: 12,000 kg, Equipment: documentation/manual, For sale is a CNC lathe, GF Georg Fischer lathe FMS NDL-40/130, with Siemens 840D control, including 2 additional chucks. Max. workpiece diameter: 400 mm Max. workpiece length: 1300 mm Selling price ex works Condition: Good condition, the machine is powered and can be tested. Upon request, I can also send a current video demonstrating the most important functions. Important terms of sale (B2B only): Bedpfj Agrhdex Aknsww The sale is exclusively to commercial enterprises. By submitting a bid or making a purchase, you confirm that you are acting as an entrepreneur within the meaning of § 14 BGB. Exclusion of liability: The sale is made with the exclusion of any liability for defects in materials and workmanship. Warranty: No warranty or guarantee is provided. Returns: No returns or exchanges are permitted. Liability for damages resulting from injury to health, body, or life, as well as from gross negligence and/or intentional breaches of my obligations as a seller, remains unlimited. Permitted delivery area (EU internal market only) The sale and transfer of ownership of this machine are exclusively to commercial buyers with a registered office and delivery address within the European Union (EU). A sale to third countries (e.g., Switzerland, the United Kingdom, the USA) is excluded. A valid VAT identification number (VAT ID) must be provided for invoicing.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 240 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 66 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 800 mm, total height: 1,600 mm, total length: 2,750 mm, total width: 1,340 mm, overall weight: 2,000 kg, spindle nose: A2-6, Equipment: documentation/manual, Spindle bore: 66 mm Spindle nose: A2-6 Spindle speed: 30~2500 rpm SIEMENS 808D Advanced control system SIEMENS servo drives Frequency-controlled main spindle motor (5.5 kW) Hydraulic chuck, 200 mm, with hydraulic unit Hydraulic tailstock Automatic turret with 8 stations (20x20 mm) SIEMENS electrical components MK4 live center Cooling system Automatic lubrication system Electronic handwheel Bjdozzcyaopfx Aknsww LED work light Machine body made of cast iron Door switch 3-color warning light

Condition: excellent (used), Year of construction: 2012, 2x INDEX V300 vertical CNC lathe Power: 87 kW Year: 2012 1 tool turret with 10 positions CNC: SIEMENS SINUMERIK 840D sl with parts conveyor Approximately 19 tool holders, including powered tool holders and 10-tool displays Chip conveyor Bwodpfx Ake Aggb Uenjw Tilting and forklift-compatible chip bin, GOUBARD

Condition: good (used), functionality: fully functional, Gildemeister NEF 320 CNC lathe Technical data: Manufacturer: Gildemeister Type: NEF 320 Machine: CNC lathe Bwodo Aggiiopfx Aknew Max. turning diameter over bed: 320 mm Max. turning diameter over carriage: 150 mm Max. turning length: 500 mm Max. distance between centers: 750 mm Spindle speed: 10–4,000 rpm Spindle bore: 50.8 mm Motor power: 9 kW Control system: Heidenhain MANUAL plus