Condition: good (used), Year of construction: 1990, 1 used lead screw and turret lathe Manufacturer: Weiler Type: Commodor Year of manufacture: 1990 Technical data: Center height: 190 mm Swinging diameter over bed: 380 mm Swinging diameter over carriage: 190 mm Distance between centers: 1000 mm Spindle bore: 56 mm Spindle mounting: DIN 55027 size 6 (A2-6) Spindle taper: MK 6 Spindle diameter in the front bearing: 90 mm Speed range: 25 – 2000 min⁻¹ Number of speeds: 18 steps Longitudinal feed: 0.026 – 0.90 mm/rev Cross feed: 0.013 – 0.45 mm/rev Metric threads: 0.3 – 10 mm Inch threads: 80 – 2.75 threads/inch Tailstock quill stroke: 150 mm Hjdpjzutifsfx Andjnr Tailstock quill taper: MK 4 Dimensions: Length: approx. 230 cm Width: approx. 110 cm Height: approx. 200 cm Weight: 1600-1700 kg with Heidenhain digital display

Condition: good (used), Year of construction: 1989, 1 used lead screw and spindle lathe Manufacturer: Weiler Type: Condor B Year of manufacture: 1989 Technical data: Center distance: 750 mm Center height: 165 mm Spindle bore: 40 mm Spindle speed: 22 – 2800 rpm Tailstock: MK 3 Hsdpezuthhofx Andonr Drive power: 1.6 / 3.2 kW Weight: 1040 kg Dimensions: 1,850 x 880 x 1,290 mm Equipped with: 3-axis digital display Lever collet chuck Chuck guard

Condition: used, Year of construction: 1973, 3 Gildemeisters AS32-6 in good state for sale - must go due to cessation of activities Different separate spare parts available, among which a new tapping device, a new bronze crown wheel for the main drive, a cross drill device, several gripping spindles for processing the rear of product and several other spare parts Hodpfx Anjd S E Itedonr €9.500 per Gildemeister

Condition: good (used), Year of construction: 1986, Swing diameter: 1,320 mm Turning length: 5,000 mm Faceplate diameter: 1,250 mm Workpiece weight: 14 t Swing diameter over support: 900 - 950 mm Hodpfx Anoztp Eyjdonr Total power requirement: 45 kW Machine weight approx.: 18 t

Condition: good (used), Year of construction: 1972, turning diameter over cross slide: 1,000 mm, Turntable diameter: 1000 mm Torque at the spindle: 900 Total power requirement: 17 kW Machine weight (approx.): 6.1 t Hodpoztqaxjfx Andsnr

Condition: good (used), Year of construction: 2007, - Speed range: [rpm]: 6,000 - Torque: [Nm]: 480 - Max. turning diameter over bed: 290 mm - Chuck diameter: 200 mm - Turret: 12-position, VDI 40, Sauter - Driven tools: 7.8 kW - Travel: - X-axis: 550 mm - Z-axis: 200 mm - Rapid traverse (X/Z) [m/min]: 30 / 20 - Feed (X/Z): [m/min.] 11 kN - Features: - Left-hand chip conveyor; 300 mm wide; ejection height 800 mm - Probe; direct linear measuring system; glass scales on all axes Hnjdpfx Asztp Easnder - Heidenhain circulating pickup tape - Machine with feed belt for part loading - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit exchanged.

Condition: ready for operation (used), functionality: fully functional, Single spindle automatic lathe TRAUB A-15 is in perfect condition, ready for use Max turning diamater 15 mm Hnedsyy Nz Repfx Andsr

Condition: used, Year of construction: 2012, controller manufacturer: Mitsubishi, controller model: M70, _____ Description: Year of manuf. : 2012 Control : Mitsubishi M70 Hnsdsztifmopfx Andsr Turning length : 100 mm Mainspindle: Technology:Belt-driven spindle Speed:6.000 rpm Power (max.):7,5 kW Torque (max.):60,8 Nm Barcapacity:42 mm C-Axis:0,001° Workpiececlamping:Collet chuck, Type 173E Subspindle: Technology:Belt-driven spindle Speed:5.000 rpm Power (max.):5,5 kW Torque (max.):38,7 Nm C-Axis:0,001° Workpiececlamping:Collet chuck Movement in X/Z:140/310 mm Rapid travers in X/Z:12 m/min Toolcarrier (X/Y/Z): Technology:Turret with 8 stations Tooldrive:5.000 rpm Movement in X/Y/Z:140/70/235 mm Rapid travers in X/Y/Z:20 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Cooling pump Rawmaterialfeed:Bar laoder, IEMCA Master 80 HF Finishpart removal:Part catcher with conveyorbelt Fire-extinguishing unit:Kraft + Bauer Further Equipment:Trafo

Condition: used, Webster Bennett 48 Inch Elevating Rail CNC Vertical Borer. Hsdpsymc Ipsfx Andenr Serial Number 6644-1 Chuck manual 48 inch, supplied with jaws Hydraulic turret Fanuc 18i -T Control. Swarf conveyor Air conditioning Unit on Electrical Panel. 1250mm (approx. ) under tool to table.

Condition: excellent (used), Year of construction: 2012, GILDEMEISTER - CTX 310 eco V3, year of manufacture 2012, spindle hours approx. 8000 hours Turning diameter 210 mm Turning length 580 mm Control system 840 D Siemens Center height 190 mm Hedpezumn Uofx Andonr Turning diameter over the bed 330 mm Turning diameter over the compound slide 260 mm Spindle speed range - main spindle max. 4,000 rpm Drive power - main spindle 10 / 7.5 kW Max. torque 115 / 86 Nm Spindle bore 68.5 mm Usable bar diameter 51 mm C-axis 0.001 ° Travel - x 185 mm Travel - z 455 mm Number of tool positions 12 Tool holder VDI 30 Driven tool stations: 6 Tailstock travel 400 mm - Chuck including various jaws - 12 VDI 30 tool holders - Driven tools: none - Chip conveyor

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: EK01, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 600 mm, spindle bore: 83 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 20,000 W, rotational speed (min.): 1 rpm, rotational speed (max.): 2,500 rpm, total height: 1,800 mm, total length: 4,500 mm, total width: 2,300 mm, quill diameter: 80 mm, quill stroke: 200 mm, workpiece weight (max.): 1,800 kg, type of input current: AC, torque: 1,500 Nm, overall weight: 4,500 kg, swing diameter over bed slide: 570 mm, spindle nose: DIN55027 Größe 8, Equipment: documentation/manual, Cycle control: - Sinumerik 810D with Weiler software "D3" - 3-jaw chuck: Ø315 - 4-position tool holder Parat: Size 3 Hnedpfx Aezumfaondsr - Various tool holders (without tools) are included - Coolant level 1: 20 l/min at 2 bar - Coolant level 2: 30 l/min at 10 bar - Chip conveyor with discharge height of 1250 mm - 3 steady rests Tailstock - Arbor diameter: Ø80 mm - Arbor travel: 200 mm - Internal taper of the arbor: MK5 Application area: The machine was used in our production for the machining of various materials. These include various grades of steel, stainless steel, brass, and aluminum. The machine is suitable for both single-part and small-series production and was used in single-shift production. General information: The machine is being sold due to the purchase of a new machine. It is currently still in our ongoing production and can be inspected and tested at any time while powered and in operation. The machine bed shows signs of wear and tear due to age and use. For the highest precision requirements, we recommend an overhaul of the bed guides. However, the machine is still ready for use and productive.

Condition: excellent (used), DOOSAN PUMA 3100 XLY CNC LATHE ONLY 2163 RUN TIME HOURS !!!!! UPGRADED FANUC I CONTROL 305 MM HYD CHUCK 420 MM TURNING DIA 2125 MM TURNING LENGTH MAX SWING 850 MM MAX SWING OVER CROSS SLIDE 670 MM X TRAVEL 293 / Y TRAVEL 130 MM / Z TRAVEL 2190 MM FULL C AXIS AND Y AXIS Hodpfx Aezumadendonr HYD STEADY - SMW SLU-X-4-MS ( CAPACITY 30 - 245 ) MAX SPINDLE SPEED 2800 TOOL PROBING DRIVEN TOOLS - 2+2 + STATIC HOLDERS SPINDLE POWER 35 HP YEAR 2012 THIS MACHINE HAS BEEN ONE OWNER ONE OPERATOR SINCE NEW - NEVER REQUIRED A REALIGNMENT - IMPECCIBLE CONDITION THROUGHOUT LOCATION NORTHERN IRELAND LOADING - FREE TRANSPORT CAN BE PRICED - PLEASE GIVE FULL ADDRESS

Year of construction: 1996, condition: ready for operation (used), Center distance: 1500mm, rotational speed: 3-2800/min, max. swing over bed/ slide: 500/ 290mm, controls: Monforts Control-System K, weight: 3.3t, with accessories, without tools. Hjdpfx Aeip D Rhondenr

Year of construction: 2007, condition: ready for operation (used), Length: 2600mm, width: 1700mm, height: 1800mm, connected load: approx. 12.5kW, on-site inspection is possible. Hnodoq N A I Ropfx Andjr

Year of construction: 1996, condition: ready for operation (used), Center distance: 1500mm, max. rotational speed: 2500/min, spindle opening: 77mm, chuck diameter: 250mm, swing over bed/ slide: 510/330mm, controls: Siemens SINUMERIK 805, connected load: 20kW, weight: 3t, with stainless steel tab, steel holder and tool cone, an inspection is possible. Hjdep Sr Rgepfx Andonr

Year of construction: 2004, condition: ready for operation (used), X-travel: 200mm, z-travel: 650mm, W-travel: 750mm, swing diameter over slide: 265mm, center distance: 650mm, max. turning length: 650mm, length: 2500mm, width: 2000mm, height: 3350mm, weight: 7.2t, with documentation. Hedpfxoldf Exj Andjnr

Year of construction: 2005, condition: ready for operation (used), X-travel: 200mm, z-travel: 400mm, W-travel: 670mm, swing diameter over slide: 300mm, center distance: 600mm, max. turning length: 350mm, length: 2500mm, width: 2000mm, height: 3350mm, weight: 6t, with documentation. Hnsdpfxjldf E Ho Ander

Year of construction: 1996, condition: ready for operation (used), Center height: 165mm, center distamnce: 600mm, turning length: 560mm, max. rotational speed: 3200/min, swing over surface/ bed: 200/ 315mm, weight: 1.8t. Hnedpfxegrn N Rs Andor

Year of construction: 2008, condition: ready for operation (used), Turning diameter over bed/cross slide: 500mm/280mm, max. workpiece length: 1500mm, travel X/Z: 280mm/1430mm, spindle bore: 82mm, speed: 2200rpm, rapid traverse X/Z: 6m/10m/min, quill diameter: 75mm, quill stroke: 150mm, bed width: 400mm, chuck diameter: 250mm. Machine dimensions X/Y/Z: approx. 3350mm/1750mm/1650mm, weight: approx. 2700kg, control: Fanuc Series 0i Mate-TC. Documentation available. On-site inspection is possible. Hnsdewynv Tspfx Andsr

Year of construction: 1993, condition: ready for operation (used), Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible. Hnjdpfx Aoxq Eyuonder

Condition: ready for operation (used), Center height: 230mm, turning diameter over bed/cross slide: 460mm/270mm, spindle bore: 62mm, distance between centers: 1000mm, threading range inch: 4-80 TPI. The machine has been retrofitted with a digital display. An on-site inspection is possible. Hnedpfx Ajw U Uaasndor

Year of construction: 1992, condition: ready for operation (used), Turning diameter over bed/face slide: 420mm/280mm, turning length: 1000mm, spindle bore: 78mm, max. speed: 3550rpm, drive power: 35kW, tool positions: 12 (with driven tools), tool holder: VDI50, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2200mm, weight: approx. 10000kg, control: Siemens 840T with C-axis. After a buffer battery replacement, the software of the machine was deleted, whereby some machine parameters were deleted without documentation and automatic operation is currently impossible. Expected to be available from Q1, 2025. Hnodpfxeu D H Hwj Andor

Year of construction: 1998, condition: ready for operation (used), Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible. Hodpfx Asxmkcaendsnr

Year of construction: 1999, condition: ready for operation (used), Fresh oil lubrication capacity: approx. 3l, voltage: 400V, frequency: 50Hz, fuse protection (slow-blow) according to VDE 0100: 80A, permissible voltage fluctuation at 400V: ±10%, connected load: 44kVA, length: 3210mm, width: 1750mm, height: 1750mm, weight: approx. 4.6t, with chip conveyor. An on-site inspection is possible. Hsdpfx Ajza E Sqondonr

Year of construction: 1996, condition: ready for operation (used), Offered is a slant bed CNC lathe. Bar capacity: 65mm, travel X/Z: 160mm/510mm, control system: Siemens Sinumerik. Equipped with bar loading magazine. Weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 2800mm/1800mm/1900mm. Inspection possible by arrangement. Expected to be available starting February 2027. Hedpfjy Ulnisx Andonr