Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Dob E Tckjv Hm Nmjgsut Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: new, A complete pallet production line. Number/Pos Part no/Name/Quantity 1/OKKR-100/Opti-Cutter Magasin/L=3000mm/1 2/RON120/Block feeder carousel/1 3/OM-1500EL/Leg Machine/1 4/LP-OM/Leg positioning system/1 5/D-1000EL/Deck Machine/1 6/KTR-1006/Chain conveyor L=6000/1 7/GRG/Gantry Robot mechanical Gripper/1 8/SMS-1000EL/Assembly Machine/1 9/HKR/Automatic corner cutting machine/1 Dujb E Tckewduudeget 10/KTR-1004/Chain conveyor L=4000/1 11/ROB-G/Robot with mechanical gripper/1 Average capacity: 1500 pallets/8 hours (800x1200 mm pallet with max 6 deck boards) Maximum capacity: 1900 pallets/8 hours (800x1200 mm pallet with max 6 deck boards)

Condition: used, Year of construction: 2016, 2016 Gannomat Index 1300 CNC Drilling and Dowel insertion machine. 4 x working zones. Single drill spindle. Dueb E Tckevyhaajgot Single dowel insertion head. Available for any demonstration. Gluing unit is fitted to the machine, but this is not working. With the exception of gluing, the machine works well.

Condition: good (used), Cross chain conveyor for packages/boards Dob Eswdv Hhs Tckgjut Chain length 2100mm Spacing of extreme chains approx. 1700mm Hydraulic scissor table 2500x1200mm

Condition: new, band saw according to CE and with the following features strong cast iron work table, inclinable balanced cast iron fly wheels saw blade guide, telescopic saw blade tensioning indication upper and lower saw blade guide cleaning brush for the lower fly wheel sturdy AL fences max saw blade width 16 mm suction connection under the table micro switches on machine doors work table dimensions 600 x 520 mm working table height 900 mm fly wheel DM 450 mm fly wheel speed 700 U/ min max cutting height 300 mm Dsb E Tsdibw Asckgsut max cutting width 440 mm min/ max saw blade length 3690/ 3742 mm min/ max saw blade dimension 6 x 0,5 / 25 x 0,5 mm motor 3,0 kW, 3 Ph 50 Hz, 400 V suction connection 120 mm

Condition: new, Fully automated block cutting machine for pallet legs. Maximum length of raw material 6m. The machine suits all type of pallet production. OKKR-2006 can operate as a separate standing machine or as part of a production line. How does it work? Dsb Ejwdutms Tckgeut The machine is fed block material on the chain infeed conveyor. The material is fed automatically and the machine cuts the blocks into the preinstalled length. OKKR-2006 can be programmed to cut several different lengths of blocks from the original piece of raw material. Maximum length of the raw material is 6m. Asssembled block size: Min / max length: 600 mm - 6000 mm Width min / max: 75 mm - 150 mm Thickness min / max: 75 mm - 100 mm Specifications Operators | 0 Length | 7,5 m Width | 2,5 m Height | 1,8 m Power | 7 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 450 L/min Should be filled and controlled | Lubrication points Machine capacity | 36 blocks/min Standard equipment | 1 electric motor for saw blade 1 electric motor for material infeed 1 electric motor for chain infeed Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Condition: new, SCM gabbiani p90 panel dividing saw - exhibition machine - special price! Technical data: Saw blade projection mm 90 Worktable height mm 950 Number of collets 5 as standard CUTTING DIMENSIONS mm 3300 x 3200 Variable saw carriage speed m/min 6 - 60 Variable pusher speed m/min 0 - 60 Saw blade motor power kW 7.0 Speed rpm 4650 Saw blade diameter mm 340 Saw shaft diameter of main saw blade mm 80 Scoring motor power kW 1.5 Speed rpm 5850 Scoring blade diameter mm 200 Scoring blade shaft diameter mm 80 Compressed air requirement NL/min 300 Compressed air bar 7.0 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Dob E Tcsiz A Amekgout Suction nozzle diameter mm 4x120 including the following options: 590134 Cutting depth 3200 mm (version 33) OF0263 eye-M control panel with integrated PC 590261 Cut editor OF0454 Maestro pattern 590271 Maestro connect: preparation without "gateway" for subsequent installation OF0457 Human-machine interface software (HMI) MAESTRO ACTIVE 590258 Rear table with castors, on the side of the longitudinal stop 590246 Fixed air cushion table 2500x800 mm with castors and reinforced fan 590239 2 x movable air cushion table 1500x600 mm with castors and reinforced fan 590244 Saw carriage with independent stroke control of the saw and scoring saw blade 590245 Optimized vertical stroke of the saw blade on 2 levels (medium/maximum) 590143 Device for grooves with manual height adjustment of the saw blade 590241 Execution of grooves (feed/return of the saw carriage) 590164 Double lateral automatic aligner 301230 Foot switch for starting and stopping the work cycle 590044 Compact labeling unit - printing of labels with barcode 590144 4 x additional clamps 900088 Magnetic tape monitoring of the pusher position 102015 European safety regulations (CE mark) 109993 MACHINE LANGUAGE: German

Condition: new, Semi-automated nailing machine for pallet legs. How does it work? The magazines are manually fed with blocks and boards where after the machine automatically nails the parts together. The machine is equipped with three channels for blocks and a magazine for boards. Easily adjustable It’s easy to produce various types of pallet legs with OM-1000. The machine has three channels for inserting blocks. The cassettes in the channels are changed in order to fit the size of the blocks. The cassettes are easy and fast to readjust. Mychrome has various additional machinery that can easily be docked on to existing machines in order to build a longer line where more stages can be automated. The possibility to modify the design and the size of the pallets is still available with the additional machinery. Asssembled leg size: Min / max length: 600 mm - 1 600 mm Width min / max: 16 mm - 150 mm Leg boards: Min / max length: 600 mm - 1 600 mm Width min / max: 75 mm - 150 mm Thickness: 16mm - 28mm Blocks: Material: Solid wood or pressed blocks Dimension: 70 -100mm Width: 75 -150mm Specifications Operators | 1 Length 2,0 m Width 2,5 m excluding platform ladder Height 3,6 m Power Electric: 6 kW, 3x400 V+N, Hydraulic: 15 kW, 3x400 V+N Pneumatic system 7 bar compressed dried air: 300 L/min Should be filled and controlled Container for lubricating oil Machine capacity 12 legs/min Standard equipment Dujb E Towdutaockget 3 channels with motorized adjustment 3 cassettes, manually adjustable for block sizes 1 cassette, manually adjustable for board length Operators terminal for production control Program for saving nail positioning Nailing system Electric or hydraulic beam nailing 1 nail box (9 nails) 9 nailing hammerheads Individual nail picking nail indication system Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Condition: new, Work table adjustment in the infeed by means of parallelogram system Display for chip removal via degree scale Simultaneous height adjustment and locking of the work tables complete with anti-tilt device Quick changeover system for changing from dressing to thicknessing operations (CE version) by means of a special support for the opening of the dressing tables and an automatic pneumatic positioning system of the suction hood, with hydraulic assistance. "READY" electronic control includes: - Thicknessing table adjustment - Manual, semi-automatic and automatic mode with 99 storable working programs. - Additional functions: Calculator and hour meter Automatic star delta start for main engine Machine table with height adjustment via 4 steel threaded spindles Dob E Tod Akyzjckgeut Rubber-coated feed roller at the outlet Exchangeable feed rollers Link pressure shoes in the infeed Planing shaft and setting gauge for planing knives Micro protection switch for correct positioning of the dressing tables and extraction hoods Dressing hood (CE version) Automatic motor brake on main motor Thermal protection switch Emergency stop switch Lockable main switch CE Declaration of Conformity Technical data [mm Usable working width [mm] 520 Total table length [mm] 2310 Blade shaft diameter [mm] 120 Motor power [kW] 9.0 Hz 50, 400 V Planer shaft speed [rpm] 5000 4 knives [mm] 35 x 3 x 520 Aluminium planing fence [mm] 1200 x 190 Planing fence inclination from 90° to -45 Min./ma

Condition: new, How does it work? The magazine is manually fed with deck boards and stringer boards, then the machine automatically organizes the decks in the right position for nailing. The machine is constructed for continuous and reliable production of pallets. It combines professional precision with a user-friendly setup. The size of the manufactured pallets can be easily readjusted in just a few minutes. Djb Ejwdurpo Tckgjut Deck Size: Min / max length: 600 mm - 1 600 mm Min / max width: 600 mm - 1 400 mm Stringer Min / max length: 600 mm - 1 400 mm Min / max width: 75 mm - 150 mm Min / max thickness: 16 mm - 28 mm Min / max wing: -20mm - +50mm Deck board Min / max length: 600 mm - 1 600 mm Min / max width: 75 mm - 150 mm Min / max Thickness: 16mm - 28mm Specifications: Operators | 1 Length | 4,0 m Width I 3 m excluding platform ladder Height | 3,6 m Power | Electric: 14 kW, 3x400 V+N, Hydraulic: 22 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 400L/min Should be filled and controlled | Container for lubricating oil Machine capacity | 24 deck boards/min Standard equipment: 2 cassettes for deck boards 3 channels for stringer feeding 3 cassettes for stringer 1 mechanical clinching plate Nailing system: Electric or hydraulic beam nailing, 1 nail box (9 nails), Individual nail picking, nail indication system, 9 nailing hammerheads Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Condition: excellent (used), Year of construction: 1991, Long dressing tables Work tables made of gray cast iron Sturdy planer fence with hand crank, swivels 0 - 45 degrees Helical toothed feed roller on thickness planer Motor protection switch Thicknessing table height adjustment with handwheel Under-table roller Working width max. 500 mm Planing height 3 - 225 mm Planer table length 2300 mm Planing shaft DM 120 mm Number of planing knives 4 # Planing shaft speed 4500 rpm Motor power 4.0 kW, 400 V, 50 Hz 2 Feed speed 7 - 14 m/min Dimensions approx. L x W x H = 2300 x 850 x 1050 mm Weight approx. 900 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. Dueb E Toudx Tajckget The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Semi-automated nailing machine for production of complete pallets in two steps. How does it work? Blocks and leg boards are fed manually in the left fixture. The machine nails the parts together automatically. The ready-made legs are moved by hand to the right fixture, where deck boards are manually placed on top of the legs and nailed together automatically. Both fixtures run simultaneously. The machine starts by pushing a button and the finished pallets are manually pushed out in the back of the machine. Mychrome has various additional machinery that can easily be docked on to existing machines in order to build a longer line where more stages can be automated. The possibility to modify the design and the size of the pallets is still available with the additional machinery. Pallet size: Min / max length of deck & legs: 600 mm - 1 600 mm Min / max width of deck: 600 mm - 1 300 mm Specifications: Operators | 2 Length | 3,5 m Height | 3,6 m Power | 14 kW, 3x400 V+N Dsbel Awy Dj E Tckgjut Pneumatic system | 7 bar compressed dried air: 300L/min Should be filled and controlled | Container for lubricating oil Machine capacity | 500 pallets/8h Standard equipment: 1 channel for legs 1 channel for pallet assembly 1 pallet matrix interchangeable 1 leg matrix adjustable Operators terminal for production control Program for saving nail positioning Nailing System | Hydraulic beam nailing, 3 nail boxes, 30 nailing hammerheads

Condition: new, Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Power: 18,5 kW Shaft length: 550 mm Shaft diameter: 222 mm Shaft RPM: 120 rpm Number of cutting knives: 14 Granulation: 10-30 mm Capacity: up to 4 m3/h (depending on the wood) Dsb Eegw Sxzs Tckgjut Material discharge opening: 160 mm Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) Filling opening: 946 x 567 mm Dimensions L/W/H: 1880/1120/1670 mm Weight: approx. 1250 kg 2 years warranty or 2000 working hours Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2002, Residual wood shredder / chipper Year of construction 10/ 2002 Hopper opening approx. 600 × 800 mm Hopper capacity 0.6 m³ Profile rotor with 14 round knives Hydraulic feed Rotor length 600 mm Rotor diameter 252 mm Rotor speed 90 rpm Motor power 15.0 kW CE Dimensions L x W x H approx. 1800 x 1200 x 1610 mm Weight approx. 1,300 kg NEW CUTTING BLADES NEW ROTOR BEARINGS NEW ROTOR BLOCKS NEW SLIDER GUIDES NEW V-RIEMS NEW GEAR OIL Duob E Tckeqxbc Dogot Automatic star-delta start-up Switch cabinet with PLC control and 5 meter cable harness Automatic shutdown when hopper is empty Safety package with gearbox limit switch Vibration-damping machine feet Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Year of construction: 2024, Advantages BOVER_BASIC intelligent control system Power set (electric motor, reduction gear and belt transmission) Filling hopper Hydraulic pressure unit Robust and adjustable Hardened knives with four cutting edges with an extended service life Hardened cleaning knives Hardened cutting racks HARDOX sieve The engine start-up is controlled by the star/triangle system Basic characteristics FILLING HOLE (mm): 1445 × 1345 ROTOR WORKING LENGTH (mm): 650 ROTOR DIAMETER (mm): 270 SIEVE HOLE DIAMETER (mm): 14 CAPACITY (m3/h): 3 – 5* POWER (kW): 22 WEIGHT (kg): 1750 * Depending on the material and diameter of openings in the sieve OPTIONS on request: Adjustable sieve rails Suction sink with Ø160 mm attachment Screw/snail conveyor (price for 1 meter) Dujb E Tehbdg Ujckgot Hi-Lo "TURBO" hydraulic power unit Customized hopper Bover Premium with remote access Additional Sieve/Screen Heavy-duty gearbox (22/30 kW) Secondary cutting blade HARDOX toothed strip on pusher rack Hydraulic oil cooler system Ethernet PLC plug-in Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, operating hours: 2 h, Special, patented shape of the ROTOR! Motor power: 11/ 15/ 18 kW, 400 V, 50 Hz Rotor width: 595 mm Rotor speed: approx. 45 rpm Rotor diameter: 280 mm Sieve: hole size 7 to 30 mm (optionally hardened special steel) Dsb E Tckehq T Udjgeut Cutting crowns: 34 pieces 25×25 mm (hollow ground, 4-way reversible, hardened special steel) Counter blade: up to 2 pieces (2-way reversible, optionally hardened special steel) Throughput*: up to 2 m3/h (*depending on material) Material feed opening approx.: 600 x 350 mm Solid main bearings compact control cabinet with modern PLC control & 5m cable length Suction diameter: 200 x 200 mm Dimensions L x W x H approx.: 1,050 x 1,180 x 1,890 mm Weight: approx. 900 kg 2000 hour guarantee on the high-performance gearbox

Year of construction: 1993, Condition: good (used), motorised transport table with rollers and. var. speed Dujb E Tckogvvn Ejgst dimensions L x W x H = 2950 x 1300 x 900 mm feed speed var. height adjustable +/- 15 cm max. weight load 50 kg/ m Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 1996, goose neck 920 mm feed speed 20 m/min veneer thickness ca. 0,4 - 2,0 mm motor 400 V, 50 Hz,, 3 PH incl. manual incl. glue thread Dusbsg Nn E No E Tckget Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2004, chain mortising machine with additional unit made up of two horizontal routers for the execution of the handle and the key holes and two adjustable and motorised swinging units for the execution of slots vertical working unit: max work piece thickness 230 mm max work piece height 710/ 1050 mm vertical stroke length 150 mm horizontal stroke length 300 mm traverse head stroke 80 mm head tilting +/- 45 deg. vertical stroke of head stock bracket 250 mm headstock bracket tilting +/- 45 deg. max. workpiece height 1000 mm chain motor 2,2 kW, 400V, 50 Hz horizontal working unit: swinging unit no. 2 min/ max. longitudinal stroke 80/ 130 mm manual traversal stroke 140 mm pneumatic transversal stroke 140 mm Duobjlpcffs E Tckgjt swinging unit motor 0,18 kW, 400 V, 50 Hz router motor 1,8 kW, 400V, 50 Hz weight approx. 650 kg incl. pump for automatic chain lubrication incl. tools incl. manual Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Duobjr A Eq Rs E Tckgjt Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: used, Year of construction: 2004, double end profiling machine for the door and windows production working width 4000 mm 3 aggregates on each side 1 x saw 2 x vertical miling aggregate - spindle stroke 800 mm! long side profiling machine with 16 spindles machine comes with a lot of spare parts! further technical data on demand Djbodfx Hcj E Tckgeut Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 2008, - Work area 3050 x 1360 mm - Maximum loadable panel height 200 mm - N ° 1 Electrospindle 7,5 kW HSK-63 - N ° 1 horizontal Electrospindle 3 kW - 14 position tool magazine installed on the Z carriage - N ° 1 saw blade DM 180 mm 0-90 ° - No. 18 independent vertical spindles - No. 4 opposing horizontal spindles in X - No. 2 opposing horizontal spindles in X - N ° 6 worktops with 18 suction cups - Xilog numerical control - 100 mc / h vacuum pump - Security system with Bumpers and perimeter networks - CE standards - suction connection DM 250 mm - required suction capacity approx. 5500 m3/h - Incl. some tools - weight approx. 3600 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. Dusb E Tcelk Egwskget • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Year of construction: 2022, The new numerical control universal drilling machine for woodworking shops and craftsmen with very good price / performance ratio. machine incl. options: sensor for work piece calibration / measuring pressure booster for drilling spindles in Z - axis automatic lubrication system incl. SCM software "Maestro cnc" qwerty keyboard 10'' Touch Screen dDrilling head and grooving operations with 11 independent spindles and integrated blade in X direction max. workpiece dimensions X-Y-Z = 3000 x 900 x 50 mm min. workpiecedimensions X-Y-Z = 300 x 90 x 10 mm max. speed der X-Y axis 20 m/ min Djb E Tofhy R Njckgsut spindels in X-axis # 2 spindels in Y-axis # 2 spindels in Z-axis # 7 grooving unit saw blade DM 125 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Rusticating machine for wooden artefacts such as boards, profiles, beams and strip wood for flooring, with maximum width 40 or 60 cm x 30 cm high. hight adjustment via hand wheel and numerical read out brush DM 200 mm machine in CE working width 600 mm max. working height 300 mm suction DM 2 x 140 mm motor feeder 0,37 kW feeder speed variabel 3 - 20 m/min motor brushing aggregate each 4,0 kW machine weight approx 750 kg inkl. 1 steel brush DM 200 mm 1 TYNEX brush DM 200 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. Deb E Tjdd Hi Eockgsut (We answer your inquiries only with stated address + telephone number!)

Condition: as good as new (ex-display), Year of construction: 2023, 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # distance between drilling spindles 32 mm Dusbed Supge E Tckgjt working width 640 mm max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg