Condition: used, Year of construction: 1985, Weight: approx. 3000 kg Dimensions: approx. 3700 x 2000 x 1600 mm Csb Hcpmovvi Ttekjgt Storage location: Supplier

Condition: used, Year of construction: 2020, Edgeband thickness max: 8 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece width min: 70 mm Feed min: 8 m/min Feedrate max: 14 m/min Continuously variable feed: Yes Cob Hsvt Ewpscpmkegt Electromotoric height adjustment: Yes Glue system granulate: glue pot above feeding chain BRANDT Glue system QA 65N Gluing unit: Yes Quick-change glue pot: Yes Suitable for PUR glue: Yes Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes Preheating zone: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 1 motor Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Suitable for nesting: Profile scraper, Bündig/Radius/Fasestationen Aggregates actuated by control: NC-axes Type: right-side machine Machine length: 5.530 mm PU rollers: Yes Control: Homag powerTouch Conformity marking: CE mark

Condition: repair required (used), Year of construction: 2007, Functionality: unexamined, travel distance X-axis: 6,100 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 170 mm, controller model: Kvara, number of slots in tool magazine: 12, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Machine is currently partially operational. A number of parts need to be replaced/checked, such as the air lines. PLC is operational, possibly software reset required. 3-axis machine. All parts, mats, bulkheads and protective covers are present. Can be picked up immediately. Cgjb Hcowg Hw Njpmkot Possibly also a similar 4-axis machine for sale. This is fully operational and can be picked up mid-October.

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, Leadermac SMARTMAC LMC 523S Four-Sided Planer Manufacturer: Leadermac, Taiwan S/N 092323 Year of Manufacture: 07/2003 In good condition Working width: 230 mm Working height: 125 mm 5 spindles, spindle diameter: 40 mm Feed table: 2000 mm Configuration: 1st lower horizontal spindle: 7.5 kW 2nd right spindle: 5.5 kW 3rd left spindle: 5.5 kW 4th upper horizontal spindle: 7.5 kW 5th lower horizontal spindle: 7.5 kW Cgobswft Ufo Hcpmkot Continuously adjustable feed rate up to 24 m/min 3 kW feed motor Electronic height adjustment Electronic adjustment of the left head Feed on cardan shafts Five upper steel rollers Two upper rubber rollers One roller in the table top feed Pneumatic material pressure Minimum material length: 400 mm mm Chrome tables Chamber diameter 5 x 125 mm Machine dimensions L x W x H = 370 cm x 200 cm x 190 cm Weight 3500 kg CE marking

Condition: good (used), Year of construction: 1997, Functionality: fully functional, Bürkle Multifoiler, membrane press Model BTF 1628/60 Year of manufacture 1997 System for coating smooth and shaped MDV parts with thermoplastic films from a roll or as cut-to-size, for PVC, PP, high-gloss PVC, ABS film. Suitable for the thermoforming or membrane process. Max. part size 1250x 2550 mm/ Part thickness 6-35 mm Cjbov T R Sro Hcpmksgt Heating plate dimensions 1600 x 2800 mm Max. heating temperature 140° Stroke 230 mm Control Siemens Total connection 38 Kw with 2 aluminum tables and reserve table Weight 16.5 t Press length: 2,550 mm Press width: 1,250 mm Max. workpiece thickness: 35 mm

Condition: new, Year of construction: 2025, Functionality: fully functional, edge thickness (max.): 3 mm, type of input current: three-phase, compressed air connection: 6 bar, height adjustment type: mechanical, input voltage: 400 V, power: 6.5 kW (8.84 HP), input frequency: 50 Hz, warranty duration: 12 months, frequency: 50 Hz, tank capacity: 3 l, material thickness: 3 mm, plate length: 1,200 mm, DANIBRUM AC CONTUR 2 – Edge Banding Machine for Curved, Round, and Irregular Panels The DANIBRUM AC Contur 2 is the ideal solution for precision edge banding on panels with non-standard shapes — from oval, round, and rectangular parts to undefined curved geometries. Its operational flexibility allows edge application on 90° angles as well as open and closed arcs, thanks to an advanced mechanical feed system and adjustable profiling setup. A key advantage of this machine is its high-precision edge trimming, enabled by a laser sensor that perfectly synchronizes the edge tape ends, ensuring flawless joints with a tolerance of just ±0.3 mm. Operation is intuitive through a touch-screen interface that allows fast adjustment of all working parameters. The system features a vacuum-supported mobile arm, extendable up to 2250 mm, providing reliable and stable support for the workpiece during processing. For safe and efficient use, the machine is equipped with a foot pedal control system, while the adjustable feed speed enables edge banding at 0 to 30 cm/s and longitudinal profiling at 0 to 24 cm/s. Optimized for Complex Workpieces This machine is designed to handle: Edge tape thickness: 0.5 – 3 mm Panel thickness: 12 – 60 mm Minimum working radius: 20 mm Compatible with various panel formats: Round pieces up to Ø2400 mm Rectangular panels: 1200 x 2400 mm L-shaped panels: 1400 x 1600 mm Equipped with high-speed longitudinal profiling cutters (24,000 rpm), it guarantees a high-quality finish even on complex contours. The AC Contur series includes multiple models, such as AC Contur 2 and AC Contur 3, the latter featuring two extendable arms for increased productivity. Technical Specifications Edge tape thickness: 0.5 – 3 mm Minimum working radius: 20 mm Panel thickness: 12 – 60 mm Material dimensions: Round: Ø2400 mm Rectangular: 1200 x 2400 mm L-shape: 1400 x 1600 mm Cutter speed (longitudinal profiling): 24,000 rpm Feed speed: Edge banding: 0 – 30 cm/s Profiling: 0 – 24 cm/s Edge tape joint accuracy: ±0.3 mm Compressed air pressure: 0.6 – 0.8 Mpa Working temperature: 110 – 210°C Adhesive tank capacity: 2.6 liters Arm extension length: 2250 mm Installed power: 6.5 kW Power supply: 400 V – 3 Phase – 50 Hz Cgjb Hcswg E Hvepmkjt Weight: 430 kg Overall dimensions: 1870 x 1400 x 1530 mm

Condition: used, Year of construction: 2013, Number of drill spindles: 21 Pitch: 32 mm Drill bit holder: 10 mm drill shank with extraction funnel Operation: Foot pedal Drilling direction: From below and from the front Swiveling: Manual Swivel angle: 0 and 90 degrees Number of material clamps: 3 Type of material clamping: Pneumatic Design: Stationary Stop system: Hole/construction line Miter stop: Yes Machine number: 079789 Approx. weight: 400 kg Motor power: 1.5 kW Extraction diameter: 120 mm 5 mm hole line drills with various dowel hole drills Storage location: Nattheim Cgeb Hcpevvi Dfomkst

Condition: used, Year of construction: 2023, Number of axes: 6 Tool diameter max: 320 mm Cgob Hsv S I Nlscpmkjt Infeed from magazine: Yes Electrode: Disc Conformity marking: CE mark

Condition: used, Year of construction: 2014, Functionality: fully functional, machine/vehicle number: SE 4083, overall weight: 5,000 kg, operating pressure: 150 bar, input voltage: 400 V, SALE FROM ACTIVE COMPANY Cob Hcswg E Efjpmksgt Firewood cutting unit. Serial number: SE 4083 Power consumption: KW 32 Volt: 400 Hertz: 50 Max pressure: 150 bar Weight KG: 5,000

Condition: ready for operation (used), Year of construction: 1987, Working width: 1300mm, workpiece width min./max.: 10mm/1300mm, workpiece thickness min./max.: 3mm/80mm, workpiece height min./max.: 3mm/120mm, min. workpiece length: 100mm, feed: 30m/min, dosing roller diameter: 174mm, application roller diameter: 238mm, installation length: 2000mm, weight: approx. 3250kg. On-site inspection is possible. Cobowg E Adj Hcpmkogt

Condition: ready for operation (used), Year of construction: 2009, I sell the edge brushing machine Prochera KSB. Year 2009. 2-side spindle fi.30 x max. 220mm. Motor 1,1 kW. Tilting spindle 0-90° Brush included. Weight 90 kg. Available immediately. Cjb Hcswg Ekzepmksgt

Year of construction: 1993, Condition: used, Offer in progress! Cgobowfturs Hcpmket

Condition: used, Year of construction: 2022, Oscillating cylindrical grinder from hnische specifications. A possible screw variant for spindle sleeve clamping. It is used somewhat similarly to the ProLoc device. Cgob Hcpmevvkkyokjt Storage location: Customer

Condition: used, Year of construction: 2014, Edgeband thickness max: 12 mm Cgsb Hjwftqajcpmket Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece length min: 200 mm Workpiece width min: 150 mm Feed min: 14 m/min Feedrate max: 20 m/min Continuously variable feed: Yes Electromotoric height adjustment: Yes Top pressure by belt: Yes Glue system cartridge: Yes IMA Glue system 283.203 PUR Quickmelt: Yes Quick-change glue pot: Yes Suitable for PUR glue: Yes PUR Aufschmelzeinheit: interner PUR-Aufschmelzer Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes IMA Premilling unit 08.380: Yes Preheating zone: Yes Andruckzone NC-gesteuert: Yes Trimming saw: 1 motor IMA Trimming saw 08.42: Yes Flush/radius/chamfer milling units: 1 IMA Fine milling unit 08.0561: Yes Corner rounding unit: 4 motors IMA Corner rounding unit SKF Contour trimming unit: Yes Nutfräsaggregat: Yes IMA Universal milling aggregate 08.190: Yes Scraper unit: Profile scraper, Flat scraper IMA Profile scraper unit 08.519: Yes IMA Flat scraper unit 08.521 Duplex flat scraper: Yes Buffing unit: Yes IMA Buffing unit 08.617-2: Yes Aggregates actuated by control: NC-axes Type: left-side machine Machine length: 8.600 mm IMA Workpiece infeed 63.152 Infeed table: Yes Control: IMA ICOS TS Software: BECKHOFF TWINCAT Declaration of CE-conformity: Yes Conformity marking: CE mark Weight: 3.600 kg

Condition: excellent (used), Year of construction: 2023, Functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, overall weight: 300 kg, type of input current: AC, compressed air connection: 6 bar, input voltage: 400 V, power: 2.4 kW (3.26 HP), frequency: 50 Hz, operating pressure: 6 bar, Manual edge banding machine for shaped parts and straight parts with a thickness of 16-60 mm. Cjb Hcpswg Ebaemkjgt Foot pedal for manual starting and cutting of the edge material. Alternatively, the edge length can be preset, and the machine operates semi-automatically. The work table can be raised by 45° to process 45° edges. The parts are manually moved by the operator to the glue application point. There is also a "top pressure" that supports the operator in guiding the parts and sets a certain feed rate. The machine has only been used as a test machine so far and was purchased new in 2023.

Condition: ready for operation (used), Year of construction: 2017, A Barberan roller coating machine is available. Nominal width: 1600mm, working width: 1450mm, working height: 1200mm, working height adjustment: +/-20mm, diameter of application, dosing and smoothing rollers: 248mm, heating cartridge output: 2x9.6kW, max. rolling temperature: 165°C, workpiece thickness range: 6mm-80mm, including a drum melting unit SM-Klebetechnik GX75. Documentation available. On-site inspection is possible. Cgsb Hcpowg Ez Tomkot

Condition: new, Year of construction: 2022, I sell the FELDER HAMMER F3 bottom milling machine. Year 2022. The machine is practically new. Main spindle motor 4KW Spindle tilting 0-45° Optional spindle locking system using imbus key from above. 4 speed settings, variable on the pulley 3000-6000-8000-10,000 rpm. The milling cutter set in the picture is included in the price. Cgjb Hcpmjwg Ec Dokst Fully working. Including full documentation. Available immediately.

Condition: excellent (used), Catalog number: 7641 ADVANTAGES – the best wide planing machine for wet and dry wood – ideal for processing logs, flooring, etc. – 3 planing shafts + 3 spindles – manufactured by the German brand KUPFERMUHLE – used planer, very good condition TECHNICAL DATA max planing width 800mm max planing height 200mm from above: input pulling shaft, toothed + pawls + pressure + 2 pulling shafts, toothed + pressure + planing shaft 800mm, 4-knife 7.5kW pressures + profiling shaft 800mm, 4-knife (3 straight knives, 1 profile knife installed) + pressure + pulling shaft, smooth, output + from below: Cgjbewfti Ao Hcpmkst guide strip + input table + pulling shaft, smooth + planing shaft 800mm, 4-knife 7.5kW 2 pulling shafts, smooth + smooth, sliding, divided roller + side pressure at the outlet + at the back: 2 side spindles + pressures: 1) vertical right 90mm 4kW 2) vertical left 90mm 4kW spindle diameter 35mm spindles set alternately + spindles adjustable up/down, right/left + 3) additional horizontal lower spindle 350mm, adjustable up/down + right/left 5.5kW spindle diameter 40mm at the outlet: 4 upper metal sliding rollers, 2 lower pulling rollers, rubber + adjustable rollers in the lower table + 6 types of feed speed 7/14/9/18/11.5/23m/min 2.2kW feed motor 3×180, 130mm exhaust port diameters 3100x2000x1900mm length/width/height dimensions 3500kg weight Net price: PLN 64900 Net price: EUR 15270 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Year of construction: 2022, Oscillating cylindrical grinder from hnische specifications. A possible screw variant for spindle sleeve clamping. It is used somewhat similarly to the ProLoc device. Cgjb Hovvkk Hecpmkst Storage location: Customer

Condition: ready for operation (used), Year of construction: 2018, Adhesive: PU (reactive PUR adhesives), material gap height: 0mm-50mm, application speed: 45m/min, working width: 1300mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Ceb Hcpmswg E Akskjgt

Condition: used, Year of construction: 2016, POWER UNIT 350+ P-ZRS 1 piece 400 V, NW 355, nominal volume flow 7127 m³/h according to GS-HO-07, max. volume flow 10000 m³/h, compressed air cleaning, pre-separator, integrated automatic extinguishing system, installation with hopper and substructure 960 mm rotary valve for pressure-free discharge into a transport pipe or other disposal facility, power unit for 3 kW transport fan APU 140-350 Option 8ME&8S External 1 piece machine detection for up to 8 processing machines via converter coils or potential-free contact and automatic slide control for up to 8 electro-pneumatic or motor-driven gate valves in 24 V; external junction box for independent wall mounting fill level indicator via ultrasonic sensor 1 x Alko Power Unit 140-300 [sensor and housing] flashing lamp fault indicator 1 x fill level limit indicator (Retonovio) 24 V DC 1 x inclined tube auger for mounting on APU 350 P rotary valve ZRS 960 1 x consisting of: 1 x receiving hopper dimensions 1,500 x 140 x 280 mm primed, painted with plastic lining 1 x metal bend 45° 3.5 m metal combination pipe 4 x metal pipe couplings 5.6 m conveyor spiral 1 x drive unit 45° with 200 mm outlet including maintenance opening, overfill sensor shearing, drive shaft and grounding belt 1 x spur gear motor 400 V / 0.75 KW / 197 rpm. With special shaft and reinforced bearings. TW bimetallic switch "normally closed". 1 x pipe 500 mm long, DN 200 mm, galvanized. 1 x clamping ring for pipe construction, 2 mm, DN 200 mm. Note: Flow rate is 1.5 m³/h. Chipper - specification for friction-free operation: perforated screen less than or equal to 15/20 mm. Additional charge for capacity increase to 10,000 m³/h. Item No. ER-M-161432. 1.00 pc. as described above in the machine description. Cgeb Hsvviyaecpmkst Storage location: Nattheim

Condition: used, Pivoting unit, chain width 10 mm Storage location: Supplier Csb Hcpmjvvku Eskegt

Condition: used, Year of construction: 1994, Storage location: Customer Cgjb Hcovvkpiepmkjt

Condition: used, Year of construction: 2010, · Working area: 2700 x 1300 mm · Travel X-Y: 3070 x 1750 mm · Travel length Z-axis: 270 mm · Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The layout of the machine allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The working unit is in turn attached to this mobile unit carrier on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit F12: Drilling head with 12 + 6 spindles · 7 individually accessible vertical spindles in X · 5 individually accessible vertical spindles in Y · 4 horizontal spindles in X (2 + 2) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm (6,000 rpm optionally available) · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fit · pneum. Feed stroke: 60 mm Grooving saw unit in "X" · Integrated in the drill head · Grooving saw blade with a diameter of up to 120 mm Main milling unit: · Tool holder HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 6.6 kW (9 HP) from 12,000 rpm (S1) · Motor power 7.5 kW (10 HP) from 12,000 rpm (S6) · Right / left rotation · Ceramic bearings (other power classes are optionally available) Tool changer R4 Automatic tool changing device for 4 tools. Traveling on the rear unit carrier to allow quick access to the tools. · Number of tool positions: 4 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg · Max. total weight of all tools: 16 kg · Mount for 1 angle gear · Traveling in X (other and larger tool changers are optionally available) Work table The work table is designed to guarantee the operator maximum freedom of movement. The quick vacuum clamping system ensures maximum flexibility with exact positioning and optimal hold of the workpieces. · 6 supports 1000 mm continuously pneumatically adjustable in X · 12 round vacuum suction cups D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) 1 stop in Y per support (6 in total) · The retractable reference stops are controlled by CNC · Pendulum machining as standard (2 work areas) --- other clamping systems are optionally available --- Axis movement The drive system in X, Y and Z is via ground recirculating ball bearings of the highest precision class. Such characteristics are important to ensure balanced movement even with more complex work. The movement of the various axes is carried out by brushless three-phase servo motors / brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These features make this type of drive completely maintenance-free. · Rapid traverse in Csb Hcpmovvi Taskogt

Condition: used, Year of construction: 1997, Saw roller diameter: 700 mm Max. saw blade length: 5120 mm Blade width x thickness: 35 x 0.6 mm Table size: 980 x 700 mm, tiltable 0-30° on both sides Extractor nozzle: 110 mm Cutting height: 350 mm Cutting width: 600 mm Motor: 3.0 kW, left side of stand Weight: approx. 435 kg Storage location: Nattheim Csb Hcpmsvvkmzjksgt