Used machining centers (vertical) X-axis travel up to 399mm for sale (31)

Condition: used, Year of construction: 2001, x-travel 305 mm y-travel 610 mm z-travel 100 mm Control Fanuc 21-M spindle tunring speed 12.000 U/min tool taper SK 40 Fedpfx Agowth Sno Depr number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: defective spare-parts repository (used), Year of construction: 2000, Internal Article No.: 25099 CNC Machining Center Chiron FZ08S Fpsdpsx Ekg Esfx Ag Dor Year: 2000 + 4th axis (Peiseler AWUP100) + Documentation (circuit diagram / operating manual, etc.) + Renishaw MP15 The machine comes from a vocational school, is well maintained, and has only 5,314 power-on hours. The PCU is defective and needs to be replaced. The cost for the PCU is approx. 4,000 EUR net. Control: Siemens Sinumerik 840D Spindle interface: HSK-A32 Spindle speed: 8,500 rpm 24-position tool changer Travel distances: X 300 / Y 250 / Z 250 mm Total connected load: 10 kVA Dimensions (LxWxH): 200 x 120 x 230 cm Weight: 1,500 kg

Condition: ready for operation (used), Year of construction: 2013, General Data Machine weight 680 kg Movement X-Axis Movement 304 mm Z-Axis Movement 305 mm Y-Axis Movement 254 mm Main Drive Number of axis 5 Spindle Speed 30000 RPM Spindle motor power 3.7 kW Table Table load 68 kg This 5-axis HAAS OM-2A was manufactured in 2013 and features a 3+2 configuration, with a spindle speed of 30,000 RPM and a motor power of 3.7 kW. It includes a 20-tool automatic tool changer and can handle a maximum table load of 68 kg. If you are looking to get high-quality milling capabilities, consider the HAAS OM-2A machine we have for sale. Contact us for more information. Application Types Milling Fpjdpex D Ip Sjfx Ag Dor

Condition: like new (used), Year of construction: 2017, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: D200z, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, As-new D200Z with Large Tool Changer & Erowa Compact 80 For sale is a very well-maintained D200Z with very low operating hours, a large 40-position tool changer, and an Erowa Compact 80 with ITS 100 interface preparation. Equipped with AFT oil mist extraction. The machine is currently powered up and can be inspected at any time. Immediate commissioning possible. ✅ Technical Details & Features Machine: D200Z – High-precision machining center Condition: As-new, meticulously maintained Operating hours: Very low Tool changer: Large 40-position changer for efficient machining Additional equipment: Erowa Compact 80 with ITS 100 preparation ✅ Optional Extensive Accessories Available Premium tool holders from BIG KAISER and WNT Vices for ITS 100 Erowa from SCHUNK Shrink-fit tool holders from KEMMLER Vero Visi CAD/CAM system with 5-axis module incl. postprocessor Fpedpexbdfksfx Ag Dsr ✅ Your Advantages Ready for immediate use – machine is powered up Very well-maintained, minimal use → virtually as-new Flexible expansion due to extensive accessories Ideal for precision parts, tool and mold making 📌 Price on request – inspection by appointment only.

Condition: used, HASEGAWA PM 250 is a CNC‑High speed milling machine for precision machining with high accuracy and reliability. Capacities: table 300×260 mm; travels X100 Y225 Z200 mm; table load 80 kg; spindle‑to‑table 140–340 mm. Specs: 100–30000 t/min; spindle nose SK32; rapid traverse 30 m/min; spindle motor 3.0/4.5 kW; 3x400 V 50 Hz; 12 kVA; weight ~2000 kg; dims 1750×600×1800 mm. Accessories: Renishaw probe, set of toolholders, coolant 120 l, oil mist extractor Mebaron, tool break control, status light. Delivers tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Fpedjxx U Ecspfx Ag Dor

Condition: used, Year of construction: 2016, travel -x axis 350 mm travel -y axis 550 mm travel -z axis 510 mm travel -A axis -120 / +30 ° c-axis 360 ° control MAZATROL Matrix Nexus 2 number of spindle speeds 12.000 U/min numbers of positions in the tool changer 30 tool taper SK 40 weight of the machine ca. 7,0 t 5-axis machining center | MAZAK - VARIAXIS j-500 equipped with internal coolant supply (15 bar) , a swivel axis, and a rotary table (ø 500). Fjdpfx Agow Ahywj Djpr The machine has only approx. 4.000 H spindle hours. The machine is in a very well-maintained condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VARIAXIS j500 | VARIAXIS j 500 | VARIAXISj500

Condition: new, Year of construction: 2026, travel distance X-axis: 280 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 280 mm, feed length Y-axis: 280 mm, feed length Z-axis: 400 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, nominal power (apparent): 6 kVA, torque: 57 Nm, controller manufacturer: Siemens, controller model: S828 D, workpiece length (max.): 150 mm, workpiece width (max.): 80 mm, workpiece height (max.): 180 mm, workpiece diameter (max.): 80 mm, workpiece weight (max.): 3 kg, Equipment: rotational speed infinitely variable, DANE CHARACTERISTIC table Working surface of the table 750 x 270 mm Number of T-slots in the table 3 Width of the T-slots in the table 14 mm Distance between the T-slots in the table 100 mm Maximum load of the table 100 kg Maximum travel Longitudinal axis "X" 280 mm Transverse axis "Y" 280 mm Vertical axis "Z" 400 mm Rapid traverse Longitudinal "X" 30 m/min Transverse "Y" 30 m/min Vertical "Z" 20 m/min Spindle Tool holder BT40 or SK40* Tool clamping force 8 kN Servo axis motors In longitudinal axis "X" 3.5/6 Nm In transverse axis "Y" 3.5/6 Nm In vertical axis "Z" 3.5/6 Nm Positioning accuracy of the linear axes +/- 0.005 mm Main drive motor Power S1/S6 (Siemens) 4.3/6.4 kW Maximum torque on spindle S1/S6 38/57 Nm Maximum spindle speed 8000 rpm Tool magazine Number of tools/option* 8/16* Maximum tool diameter 80 mm Maximum tool length 150 mm Maximum tool weight 3 kg Overall dimensions Length ~1360 mm Width ~2200 mm Height /maximum travel of the Z-axis/ ~2550 mm Coolant tank volume 130 l Weight ~1500 kg Standard accessories: SIEMENS CNC control system ✓ Interpolation in 3 axes ✓ Ball screw spindles, lubricated with solid lubricant ✓ Fpsdpfx Asu Sklasg Der Water-cooled tool cooling system ✓ 8-station tool magazine, swivel arm BT40 or SK40 ✓ Electric handwheel ✓ Telescopic guide covers ✓ Cabin to protect the work area ✓ Lighting system with lamp ✓ Graphic programming support - predefined processing cycles ✓ LCD display 8" (S808) - 10.4" (S828) ✓ Thread cutting without compensation holder (fixed) ✓ Air nozzles at the end of the spindle ✓ Spindle cooling system ✓ TRIM MicroSol 515 cooling lubricant concentrate ✓ Safety system to prevent opening: front doors of the machining area / doors of the control cabinet ✓ Air pressure sensor for detecting low pressure ✓ Electrical installation for mains supply 3x400V, 50Hz ✓ USB port on the front panel of the machine ✓ Standard paint color similar to RAL 5000 / machine base; RAL 7035 ✓ Machine status display ✓ Operating and programming instructions ✓ Special equipment and special design..: - Second 8-station tool magazine Swivel arm ISO40/BT40 - Spindle cooling 6-9 bar - RENISHAW TS 27R tool measuring unit - RENISHAW OMP40 workpiece measuring unit with cycles - Separate spindle cooling unit for machining colored materials and plastics - Handwheel on the bar (pilot) - Tool trolley - Precision clamping device - Automatically opening doors - Additional Ethernet output on the control cabinet for transferring programs between the computer and the machine - Siemens - SinuTrain software

Condition: good (used), Alzmetall BAZ 15 CNC – Vertical Machining Center • 3 axes • Heidenhain control For sale is an Alzmetall BAZ 15 CNC, a compact and robust vertical machining center equipped with a Heidenhain control system. The machine is still operational and can be inspected under power. It is in well-maintained, technically flawless condition. Technical Data Manufacturer: Alzmetall Model: BAZ 15 CNC Application: Milling Machine type: Vertical machining center Control system: Heidenhain Weight: 3,200 kg Table load: 500 kg Axes: 3 X travel: 600 mm Y travel: 400 mm Z travel: 600 mm Spindle speed: 9,000 rpm Tool magazine: 24 positions If interested, simply write or call. Fedpfx Agoxxxu Uj Depr

Condition: ready for operation (used), Year of construction: 2013, General Data Measurements width 2400 mm Measurements depth 2800 mm Measurements height 2800 mm Machine weight 5000 kg Main Drive Spindle speed range 12000 Tool taper BT40 Number of axis 3 Movement X-Axis Movement 1,067 mm X-Axis Rapid Traverse 24 m/min Y-Axis Movement 610 mm Y-Axis Rapid Traverse 24 m/min Z-Axis Movement 610 mm Z-Axis Rapid Traverse 24 m/min Table Tslots size 18 mm Number of tslots 5 Table load 1500 kg Tools Fpjdex D Ig Rjpfx Ag Dsr Number of index 24 Max weight 7 kg Max tool diameter 80 mm Max tool length 250 mm This 3-axis Hurco VMX42i was manufactured in 2013. It features a robust table size of 1,270 × 610 mm with a maximum load of 1,500 kg. The spindle can reach speeds up to 12,000 rpm, supported by a 15 kW motor. It includes an automatic tool changer with a capacity for 24 tools. Ideal for high precision tasks, it also offers rapid traverse rates of 24 m/min. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: 828D - ShopMill, _____ Description: Year of manuf. : 2023 Control : Siemens 828D - ShopMill Speed : 10000 rpm Movement X/Y/Z : 350/250/300 mm Spindle: Technology:Directdrive Speed:10.000 rpm Power (max.):7 kW Torque (max.):41 Nm Taper:SK30 Workingtable: Clampingsurface:520 x 300 mm Tabeloading (max.):100 kg In general: Toolmagazine:20 Stations Fedpsxthpwofx Ag Djpr Rapid travers in X/Y/Z:24 m/min Equipment/Accessory: Positionsensor:Direct Scales in X/Y Chipmanagement:Chip conveyor Coolingmanagement:Coolant pump with 8 bar Workpiecemeasurement:Touch probe, Marposs WRP 45 Toolmeasurement:Probe, Marposs TS30 4.-Axis:Walter TANI 100 NEG with 3-Jaw chuck and Tailstock Oilmistseparation:Mechanical extraction, Reven Setup operations:Electronic Handwheel Further Equipment:Rinsing pistol Further Accessory:Misc. used Toolholders

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, Vertical milling center Chiron FZ08W Fanuc 21i-M Max RPM: 15,000 rpm High-pressure spindle through-cooling X = 300 mm Y = 250 mm Z = 250 mm Fpsdpfsxd T Rzsx Ag Djr The machine was originally supplied with 2 x 4th axis Peiseler RT 100, but the 4th axes have now been removed. Tool interface: HSK 32 ATC: 24 positions Serial: Yrzzng Machine is currently in production and can be inspected at any time. The machine is in very good technical condition. I offer a 3-month startup warranty.

Condition: used, Year of construction: 2012, Hasegawa PM 150 CNC machining center TECHNICAL DATA Spindle Spindle nose: HSK-E32 Speed: 100 - 30`000 rpm Spindle motor: 3.0 / 4.5 kW Tool changer Capacity: 10 Tool - tool change time: 1.8 sec Travel distances X-axis: 150 mm Y-axis: 225 mm Z-axis: 200 mm 4th axis: Lehmann EA-507, 360° OFFER SCOPE Fpsdju E El Iepfx Ag Dsr U.A: (non-exhaustive list): Hasegawa PM 150 CNC machining center 10-position tool changer Lehmann EA-507 rotary axis transformer Fire extinguishing system Complete operating documentation Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information provided

Condition: good (used), Year of construction: 2007, Primacon PFM 24 NGD / 4 axes, Year of manufacture 2007, Heidenhain iTNC 530 control, X/Y/Z travel 240/240/240 mm, Fischer Precise spindle up to 50,000 rpm, HSK F 32/25 E chuck, 4-axis Hirschmann, Length probe, 32-station tool magazine Fsdpev Tb Eijfx Ag Depr

Condition: good (used), Year of construction: 2013, operating hours: 40,000 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL Matrix Nexus 2, spindle speed (min.): 12,000 rpm, coolant supply: 15 bar, spindle nose: SK40, number of slots in tool magazine: 30, Equipment: chip conveyor, rotational speed infinitely variable, Machine with automation, 48 pallets, 50 kg Fanuc robot. Fedpfexf Trnox Ag Dspr

Condition: ready for operation (used), Year of construction: 2011, operating hours: 937 h, General Data Measurements width 1530 mm Measurements depth 775 mm Measurements height 2253 mm Machine weight 1800 kg Control Unit Brand Siemens Model Sinumeric 840D Main Drive Spindle speed range 40000 rpm Number of axis 5 Movement X-Axis Movement 120 mm X-Axis Rapid Traverse 10 m/min X-Axis Accuracy P10 μm Y-Axis Movement 120 mm Y-Axis Rapid Traverse 10 m/min Y-Axis Accuracy P10 μm Z-Axis Movement 200 mm Z-Axis Rapid Traverse 10 m/min Z-Axis Accuracy P10 μm Table Table load 10 kg Fpjdpfx Ajx D Naxeg Dor Tools Max tool diameter 49 mm Max tool length 130 mm Type of tool holder HSK-32 Media Power consumption 25 kVA Additional Equipment Workpiece Measurement: DMG PP-400 Infrared probe Tool Measurement: RS NC-4 Coolant Conditioning Equipment: KM 10 This 5-axis DMG ULTRASONIC 10 was manufactured in 2011. It features a Siemens Sinumeric 840D control, a spindle with 40,000 rpm max speed, and a tool magazine with 60 slots. The machine offers a compact footprint and includes options like a DMG PP-400 Infrared probe and RS NC-4 tool measurement. If you are looking to get high-quality milling capabilities consider the DMG ULTRASONIC 10 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 010-001, travel distance X-axis: 400 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 300 mm, Machine purchased retrofitted in 2018 at GF Fodpjwg R N Asfx Ag Dopr

Condition: used, TECHNICAL DETAILS Fpodpfxsuhbq Ne Ag Dor - number of hours : 34373 - strokes X x Y x Z : 220 x 120 x 170 [mm] - fixed table size : 350 x 140 [mm] - working feed : 0 - 5000 [mm/min.] - spindle speed : 20 000 [Rpm] - spindle diameter : 60 [mm] - tools type : ISO 25 - changer : RANDOM 20 positions - spindle motor : 1.5/3.4 [kW] - installed power : 6 [kW] - size : 1830 x 1250 x 1750 [mm] - weight : 1 500 [kg] EQUIPMENT - control CNC FANUC 16i - rigid tapping - spindle cooling unit - oil mist extractor - measuring rule on the 3 axis (1/10 [um]) - tools measurer Blum - Humard robotization for parts - 3 R parts cell - lubricating tank with pump

Condition: used, Year of construction: 2001, x-travel 300 mm y-travel 250 mm z-travel 251 mm Control Fanuc 16iMB max. turning speeds 15.000 min/-1 tool taper HSK-A 32 number of tool places 12 Pos. Fpedowth Sbepfx Ag Der In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 2012, Primacon PFM 24 NGD / 5 axes, Year of manufacture 2012, Heidenhain iTNC 530 control, X/Y/Z travel 240/240/240 mm, 40-station tool magazine, HSK F 32/25 E spindle mount, Fpsdpfx Aov Tb Hteg Djr Fischer Precise spindle up to 50,000 rpm, 4+5 axes Howimat dividing head, Length measuring probe, Renishaw 3D probe, Z axis overhauled in 2023

Condition: ready for operation (used), Year of construction: 2017, operating hours: 11,019 h, functionality: fully functional, machine/vehicle number: 278346, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 200 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel and Axes X-Axis: 350 mm Y-Axis: 550 mm Z-Axis: 510 mm A-Axis: -120° / +30° C-Axis: 360° Rapid Traverse Speed XYZ: 30 m/min Clearance under Spindle: 50 mm ∼ 560 mm Spindle Spindle Motor Power: 11 kW Spindle Speed: 12,000 rpm Table Table Size: 500 x 400 mm Max. Workpiece Weight: 200 kg Tool Data Maximum Tool Diameter: 90 mm Maximum Tool Diameter with Adjacent Pockets Empty: 130 mm Maximum Tool Length: 300 mm Tool Positions: 18 stations Tool Change Time (chip to chip): 6.2 s MACHINE DETAILS Control: Mazatrol Smooth Dimensions Machine Dimensions (L x W x H): 3,226 x 1,900 x 2,840 mm Weight: 6,900 kg Operating Hours Machining Hours: 11,019 h Power-On Hours: 29,233 h EQUIPMENT Oil Mist Separator Through-Spindle Cooling Fodpew Nv Tkofx Ag Dopr Renishaw Probe

Condition: ready for operation (used), Year of construction: 2020, Main Drive Spindle speed range 30000 rpm Fsdpfx Asx D S Hnsg Dspr Spindle motor power 18 kW Number of axis 5 Movement X-Axis Movement 254 mm Y-Axis Movement 330 mm Z-Axis Movement 330 mm Tools Number of index 40 Type of tool holder HSK40 Additional Equipment Scraper Conveyor Through Spindle Coolant: 70 bar Transformer: 35 kVA This 5-axis Kitamura Medcenter 5AX was manufactured in 2020, offering advanced capabilities for precision machining. Ideal for complex geometries, this vertical machining centre ensures reliable performance. Consider the opportunity to buy this Kitamura Medcenter 5AX vertical machining centre. Contact us for more information. Application Types Milling

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : ISO25 - Spindle power : 0.27 [kVA] - Spindle speeds : 30000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 250/200/300 [mm] TOOL CHANGER - Tool magazine capacity : 50 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1500X1860 [mm] - Machine height : 2100 [mm] - Machine weight : 1900 [kg] Fodpfx Agsuhbrms Djpr EQUIPMENT - CNC : Num 1050 - 3 colors status lamp - Coolant tank - Spindle cooling unit - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: ready for operation (used), Year of construction: 2007, Main Drive Spindle speed range 22000 Tool taper BT30 Movement X-Axis Movement 350 mm Fpedpox D Nk Djfx Ag Dor Y-Axis Movement 250 mm Z-Axis Movement 200 mm This Brother TC 31AN was manufactured in 2007. It features a robust Fanuc machining center control, a high-speed spindle up to 22,000 rpm, and a BT30 spindle taper. The work table measures 500 x 270 mm, complemented by a 26-slot tool magazine. Specialized with a rotary changer table for efficient fixture loading. Contact us for further details regarding this machine. Application Types Milling

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK E-25 - Spindle power : 3.9 [kW] - Spindle speeds : 40000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 240/240/240 [mm] - Rapid traverses rates (X/Y/Z) : [mm/min] - Cutting feed rates (X/Y/Z) : 0.02 - [mm/min] A ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.001 [°] - Maximum workpiece diameter : 100 [mm] B ROTARY AXIS - Travel : -30 / +210 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 32 - Tool exchange time : 7 [sec] TABLE - Maximum weight upon table : 60 [kg] POWER SUPPLY - Supply voltage : 400 [V] Fpodpsw Hugxjfx Ag Djr - Total installed power : 6.4 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1.900 x 1.600 [mm] - Machine height : 2.200 [mm] - Machine weight : 1000 [kg] MACHINE HOURS - Number of hours under power : 24350 [h] - Number of working hours : 6500 [h] EQUIPMENT - CNC : HEIDENHAIN TNC 430 - Type of divisor : 4e-5e axe intégré - Coolant tank - Cooling unit : HYFRA - Tool probe - Tool-holders : 31

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,676 h, General Data Measurements width 1530 mm Measurements depth 1775 mm Measurements height 2253 mm Machine weight 1800 kg Control Unit Brand SIEMENS Model Sinumerik 840D SL Main Drive Spindle speed range 40000 rpm Number of axis 5 Movement X-Axis Movement 120 mm Y-Axis Movement 120 mm Z-Axis Movement 200 mm A-Axis Movement -15° to 120° C-Axis Movement 360° Table Table load 5 kg Tools Fpjdpfxox D Ry To Ag Der Type of tool holder HSK-25 Media Power consumption 25 kVA Additional Equipment Accessories: Ultrasonic PowerShrink This 5-axis DMG SAUER ULTRASONIC 10 Sauer was manufactured in 2010, offering advanced capabilities in a vertical machining centre format. Ideal for complex geometries and precision parts, this machine represents a significant asset for any machining operation. Contact us for more information about this machine. Application Types Milling