Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Blodpfxs Aduyzs Aknsp PRESS DATA Nominal pressing force: 400 kN Stroke frequency: 800 min⁻¹ Ram stroke: 5–50 mm Ram adjustment: 50 mm MATERIAL DATA Material thickness: 1.5 mm Material length: 1–50 mm Strip cross-section: 110 mm (?) Material width: 10–75 mm Strip speed: 45 m/min MACHINE DETAILS Manufacturer: Haulick + Roos Type: RVD 32-720HS Machine type: Punching machine Year of manufacture: 1994 Machine number: 1829697 Operating voltage: 400 V Frequency: 50 Hz Drive power: 19 kW Length: 3,000 mm Width: 2,400 mm Height: 2,700 mm Weight: 4,000 kg EQUIPMENT Feeder GF50

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, pressing force: 500 t, stroke length: 400 mm, table width: 1,600 mm, table length: 900 mm, year of last overhaul: 2017, Equipment: safety light barrier, Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Bledpfx Akjv E Nlzonep Possibility to check the machine in operation - The press is still connected to the power supply. Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, PLEASE READ CAREFULLY!!! THIS OFFER IS EXCLUSIVELY FOR EUROPEAN END CUSTOMERS, AND THE FIRST INQUIRY MUST INCLUDE COMPLETE CONTACT INFORMATION. THANK YOU. The forging line consists of a hydraulic 1500-ton forging press, an induction unit with 1200 kW, and a robot with a load capacity of 300 kg. So far, prototypes have been manufactured; however, the line was actually designed for series production, which has not yet taken place. The line was built and installed in 2023. The technical specifications are as follows: Hydraulic press 1500 tons (year of manufacture 2023) SIEMENS control system - Pressing force: 1500 tons - Retraction force: 120 tons - Downward stroke: 300 mm/s - Pressing stroke: 100 mm/s - Upward stroke: 300 mm/s - Installation height: 3,000 mm - Ram stroke: 1,500 mm (!) - Ram size: 1,600 x 1,600 mm - Table size: 1,600 x 1,600 mm - Ejection force / 1 position: 40 tons Blodpfezvnpisx Aknep - Stroke: 600 mm - Ejection speed: 250 mm/s - Return speed: 250 mm/s - Stroke: 400 + 400 mm - Traverse speed: 200 mm/s - Ram positions: 3 positions Including a 1200 kW induction unit (year of manufacture 2023) MITSUBISHI control system - 1200 kW / 450 Hz induction unit for billets - Coil size: Ø 215 / Ø 150 mm, two sets of coils - Material feeding system Including a Kawasaki robot (6 axes) – Model: ZX300S-D- (year of manufacture 2023) - Max. load capacity: 300 kg - Max. reach: 2500 mm Sample images of the machines are attached.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Bedpfx Akj Adzicsnjlp General Data Manufacturer: Haulick + Roos Type: RVD 63-800 HS/CNC Year of manufacture: 1980 Machine number: 1,202,097 Machine type: Punching press Press Data Press force: 630 kN Speed range: 30–800 rpm Drive power: 26 kW Stroke: 4–60 mm Stroke adjustment: 80 mm Die hole: 52 mm Table Table dimensions: approx. 800 × 600 mm Table slots: 4 MACHINE DETAILS Dimensions and Weight Length: 2,500 mm Width: 2,000 mm Height: 2,400 mm Weight: 6,000 kg EQUIPMENT Integrated guiding system by Haulick + Roos

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, pressing force: 1,250 t, stroke length: 630 mm, table width: 1,270 mm, table length: 1,250 mm, overall weight: 70,000 kg, working height: 900 mm, Equipment: safety light barrier, Dieffenbacher P0-F 1250A press A press in very good technical condition, available for sale from a stamping shop that is being closed down in Poland. Bodpfxov E Rihj Aknolp Modernized in 2016. Features a new Simatic S7 control system and a new electrical cabinet. Optical barriers have also been installed.

Condition: used, Year of construction: 1970, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 63 t Stroke: 250 mm Travel: 8–100 mm Stroke rate: 140 strokes/min Total power requirement: 7 kW Machine weight: approx. 3.5 t Table and ram Table depth: 710 mm Table width: 500 mm Ram dimensions: 450 × 280 mm Ram adjustment: 63 mm Bleds Aa Nahspfx Aknsp EQUIPMENT No information available regarding accessories.

Condition: like new (used), Year of construction: 1984, functionality: fully functional, total height: 3,000 mm, ram adjustment: 80 mm, total width: 1,400 mm, total length: 1,750 mm, pressing force: 50 t, stroke length: 54 mm, overall weight: 7,500 kg, DGUV certified until: 12/2027, year of last overhaul: 2022, KAISER V50W high-speed stamping press, year 1984, extensively mechanically and electrically overhauled and modernized in 2022. The machine is in very good working condition and ready for operation. Technical data: Press force: 500 kN / 50 t Table size: approx. 800 × 550 mm Stroke: 54 mm Ram adjustment: 80 mm Speed: up to 400 strokes/min Main motor: SEW-EURODRIVE, 59 kW Bljdpfez D Dq Nsx Aknop Year of manufacture: 1984 Retrofit / modernization: 2022 Equipment / modernization: New electrical equipment Siemens SIMATIC PLC control Siemens SIMATIC HMI touch panel New 59 kW SEW-EURODRIVE main motor SEW drive/inverter PILZ safety system UNIDOR LVCpro press-force monitoring system Two UNIDOR piezoelectric force sensors on the connecting rods Separate monitoring of left/right and total press force on the HMI New electrical cabinet and modern safety components

Condition: good (used), Year of construction: 1997, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press, double-column press, single-column press -Manufacturer: Hans Schoen, Hydraulic press type TES/20 with safety device -Pressing force: 20 tons -Motor: 3 kW Blodpfx Ake Ahghmonsp -Clamping table: 500 x 440 mm / Bore Ø 150 mm -Max. insertion height: 395 mm -Protrusion: 260 mm -Max. stroke: 250 mm -Hole: Ø 40 mm -Operation: Two-hand operation / foot pedal -Safety device: Sick 14-FGS -Dimensions: 1340/1050/H2460 mm -Weight: 1740 kg

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, pressing force: 400 t, stroke length: 450 mm, table width: 2,050 mm, table length: 1,500 mm, Weingarten OK 400.21.45 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Bledpfxsv E Rm Hj Aknjp Possibility to check the machine in operation - The press is still connected to the power supply. Weingarten OK 400.21.45press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 280,000 kg, Vaccari PVE 560 Screw Press (2010) 31,500kN force Bjdpfxez Tzwge Aknolp All additional information available on AllSurplus.com

Condition: good (used), Year of construction: 1967, machine/vehicle number: 6043, Offer 26180 Technical data: - Maximum pressing force: 100 t - Maximum ram stroke: approx. 500 mm - Installation height: approx. 1000 mm - Overhang to center of ram: 520 mm - Ram clamping surface: 350 x 350 mm - Ram clamping pin: 40 mm - Table size: 1000 x 1150 mm - Table opening: 150 x 780 mm - Table height above floor: 720 mm - Drive: 400 V / 8 kW Bsde Afxanopfx Aknelp - Space requirement: approx. W 1150 x H 2900 x D 2150 mm - Weight: approx. 4800 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Bjdo Adufkjpfx Aknolp Punching force: 18 t Table dimensions: 360 × 310 mm Stroke length: 20–100 mm Ram stroke: 6–36 mm Stroke rate: 100–600 min⁻¹ MACHINE DETAILS Dimensions (L × W × H): 850 × 800 × 1,500 mm Weight: 500 kg EQUIPMENT Siemens Simatic OP3

Condition: used, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 100 t Machine weight: approx. 5.7 t Stroke and operating data Stroke: 0–500 mm Overhang: 310 mm Installation height: 1,130 mm Bsdpfo Acgcfex Aknjlp The installation height is specified with the stroke in the upper position. Table and ram Table surface: 800 × 650 mm Ram surface: 800 × 600 mm Through-hole in the table: 355 mm Table height above the floor: 800 mm Safety data Safety distance: 270 mm Follow-up measurement: 135 m/s Follow-up travel: 44 mm Dimensions Length: approx. 1.2 m Width: approx. 2.0 m Height: approx. 3.67 m EQUIPMENT Conversion to comply with new safety regulations

Condition: used, Raster Press HR 800/4000 NL-2R Year of manufacture: 1994 Press force: 8,000 kN Bedpfxs Ahkrhs Aknjlp Drive: mechanical Installation height: 1,000 mm Stroke: 500 mm Stroke rate: 30 strokes/min Ram adjustment: 200 mm Ram area: 4,000 x 1,600 mm Table area: 4,000 x 1,600 mm 2 sliding tables

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: NEFF Type: RHS 25 Year of manufacture: 1981 Machine number: 3,786 Bjdpfx Ao Ad H Ttsknelp PRESS DATA Press force: 25 t Table dimensions: 600 × 360 mm ELECTRICAL DATA Operating voltage: 380 V Frequency: 50 Hz Rated current: 35 A Connected power: 7.5 kW MACHINE DETAILS MACHINE DIMENSIONS Length: 1,600 mm Width: 1,200 mm Height: 2,100 mm Weight: 3,000 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Press Type: V32 MACHINE DETAILS Manufacturer: Kaiser Machine type: Punching machine Dimensions Bledpfx Ako Adugnonep Length: 3,000 mm Width: 2,000 mm Height: 2,700 mm Weight: 3,000 kg EQUIPMENT Feeder

Condition: excellent (used), Year of construction: 1985, For sale: MÜLLER HEP 10.20.35 hydraulic press, manufactured in 1985. The press was in very good working condition until recently. It underwent an inspection in 2023. Bedpez Saqqjfx Aknelp

Condition: used, Year of construction: 2002, machine/vehicle number: 1620, functionality: fully functional, pressing force: 9,500 t, table width: 500 mm, table length: 1,150 mm, DMS 40 Mechanical Press 400 kN Bljdpsz Tzyzjfx Aknjp 25 strokes per minute Max capacity 9500 kg Max die dimensions 1150x500 mm

Condition: excellent (used), Year of construction: 2016, AIDA Press DSF-M2-6300(D1)-305-150 Servo drive Year of manufacture 2016 Press force 6,300 kN Stroke rate 1-50 (75) 1/min Stroke 350 mm Installation height 800 mm Ram adjustment 300 mm Table area 3,050 x 1,500 mm Ram area 3,050 x 1,500 mm Coil strip feeding system Bledpfx Akj Afzplonjp Strip width 100-800 mm Strip thickness 0.6-6.0 mm Coil capacity 5,000 kg

Condition: used, Year of construction: 1979, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: electro-hydraulic press Machine weight: approx. 5 t Performance Data Pressure: 63 t Stroke: 315 mm Ram stroke: 200 mm Piston stroke: 200 mm Installation height: max. 450 mm Retraction force: 1.3 t Speeds Closing speed: 210 mm/min Return speed: 210 mm/s Table and Ram Table size: 710 × 630 mm Ram clamping surface: 710 × 630 mm Drive Drive power: 15 kW Motor speed: 1,500 rpm Electrical Data Operating voltage: 380 V Control voltage: 220 V Dimensions Overall height above floor: 2,500 mm Overall width: 1,000 mm Depth: 1,600 mm EQUIPMENT Bsdps Aa Ndyofx Aknslp Electro-hydraulic press control Fixed safety valve with overload protection Safety interlock Two-hand push button Emergency stop mushroom push button Infinitely adjustable stroke adjustment Infinitely adjustable pressure regulation Fully automatic continuous operation Mechanical, infinitely adjustable fixed stop in the cylinder Handwheel for stop adjustment with display scale Automatic star-delta starter

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Manufacturer: Schaal Machine type: Punching machine PRESS DATA Press force: 100 kN Table dimensions: 380 × 160 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,000 mm Width: 800 mm Height: 1,900 mm Weight: 5,000 kg EQUIPMENT Bedpfx Ake Ad D Hdsnelp Loadgard press force indicator Feed system

Condition: good (used), Year of construction: 2005, 1 used transfer molding press Manufacturer: REIS Type: TUS 160 200 Year of manufacture: 2005 Serial No.: 031023 Control type: NC Control: Simatic Key technical data Technical feature | Value Manufacturer / Type | REIS Robotics / TUS 160-2000 Maximum pressing force | 2,000 kN Maximum retraction force | 850 kN Platen size | 1,600 × 2,000 mm Installation height | 1,800 mm Maximum possible installation height in increments of 100 mm | 2,200 mm Plunger stroke without pivoting mechanism | 1,200 mm Plunger stroke with 95° pivoting mechanism | 1,200 mm Plunger stroke with 180° pivoting mechanism | 2,000 mm Maximum possible plunger stroke in increments of 100 mm | 2,400 mm Maximum mold weight | 20,000 kg Maximum load on the upper platen | 10,000 kg Maximum load on the tilting mechanism | 12,000 kg Tilting angle of the tilting mechanism | 60° Maximum platen parallelism | 0.2 mm per 1,000 mm Maximum horizontal positioning accuracy | Ø 0.04 mm Machine weight | 28 t Speeds and connection data Technical feature | Value Maximum closing speed | 48 mm/s Maximum opening speed | 45 mm/s Carriage speed | 200 mm/s Pivoting speed | 180 mm/s Tilting speed | 100 mm/s System pressure during closing, maximum | 200 bar System pressure during opening, maximum | 220 bar Tank capacity | 475 l Connection value without / with injection unit | 25 / 28 kVA Drive power | 18.5 kW Blodpfx Ako Afahaonjp Ejection and other equipment data Technical feature | Value Maximum table ejection force | 62 kN Table ejection stroke | 200 mm Table ejection travel | 150 mm Maximum plunger ejection force | 75 kN Plunger ejection stroke | 200 mm Injection unit volume | 10 l Injection pressure | 4–10 bar Rotary unit installation height | 1,600 mm Rotary unit maximum mold weight | 18,000 kg Rotary unit maximum load on tilting mechanism | 9,000 kg Technical data subject to change.

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm stroke 950 mm table width 1050 mm table depth 1200 mm Bsdpfxjx Uru Nj Aknelp dayligth 1180 mm weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Blsdpfx Akj Ad H Uqonop Loading: December 1st to December 10th. TECHNICAL DETAILS Stamping force: 40 t MACHINE DETAILS Manufacturer: Bruderer Type: BSTA 40 Machine type: Stamping press Length: 2,000 mm Width: 1,000 mm Height: 2,400 mm Weight: 3,000 kg

Condition: used, functionality: fully functional, Pressing force 300 kN Table size W x D approx. 680 x 480 mm Installation height 600 mm Blodps Ahdryefx Aknop Stroke 400 mm Total power 11 kW