Used straightening-, and bending machines for sale (85)

Condition: excellent (used), pressure 6,3 t throat 200 mm stroke 200 mm dayligth max 500 mm Gsdpfowuu A Aox Agfjua table surface area 450 x 420 mm weight of the machine ca. 1,5 t dimensions of the machine ca. 1,2 x 0,6 x 2,0 m

Year of construction: 1960, condition: used, R.A.S. rotary mandrel press Type 200-20 machine no. 117/6 Gusdpfoic Rn Usx Agfoa stroke 200 mm pressure force 20 t spindle diameter 60 mm

Condition: good (used), Year of construction: 2011, Pressure 160 t Total power requirement 18.5 kW Gjdpfey Amxlsx Agfeua Machine weight approx. 13.5 t

Condition: ready for operation (used), Maximum forming capacity at full length: 9 gauge mild steel, corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed 91.44mm/s, downward speed 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg. The machine has a front gauge, thus the bending geometry is stored and the sheet size is irrelevant. An on-site inspection is possible. Gujdpfotia Hhox Agfja

Condition: new, square edge steel 16 x 16 mm flat steel 100 x 5 mm L-beam 60 x 8 mm round bar steel 18.0 mm weight of the machine ca. 33.0 kg Properties : - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop with locking pin - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - - - - - - Cold bending capacity Flat steel 100 x 5 mm 65 x 10 mm Round steel 18.0 mm Square steel 16 x 16 mm Angle steel 60 x 8 mm Godexcux Repfx Agfsua Bending capacity hot Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 12 mm - - - - - - - - - - Scope of delivery: - Bending plate sharp / round - Radius bending plate R 20 / R 25 - Offset block - Bending plate for round bar - Offset plate - Radius bending plate R 10 / R 15 - Angle stop - Clamping block with eccentric clamp - Material stop

Condition: new, pressing force: 200 t, DURENDUS DPS-200 – Hydraulic Gantry Straightening Press – 200 t – 1,500 × 2,000 mm The machine shown here was built and delivered on behalf of a customer. We can manufacture this machine for you at short notice. This is a hydraulic gantry straightening press from DURENDUS with a maximum pressing force of 200 t. The machine features a table size of 1,500 × 2,000 mm, a maximum installation height of 800 mm, and a stroke of 400 mm, making it ideally suited for straightening operations, press-fit processes, as well as applications in steel construction and tooling. Options (on request): The listed options are based on completed customer projects and allow for targeted customization of the machine to the specific application. The base machine offers a functional standard version – in practice, it is most often upgraded with additional equipment and configured according to project requirements. Examples: * Siemens S7-1200 PLC + 7'' display * Radio remote control * Safety strip at the base of the gantry columns (600 mm) * Table with T-slots * Motorized bridge travel * Extended travel range * Increased open height * Safety light curtain at floor level beneath the bridge * Laser distance measurement * Lifting cylinders integrated in the table ##### Technical Data & Information: Hydraulic Gantry Straightening Press – 200 t – 1,500 × 2,000 mm ==== General Information Manufacturer: DURENDUS Model: DPS-200 Design: Gantry Press / H-frame Press Pressing Force: 200 t (adjustable) Total Weight: approx. 8,500 kg Dimensions (W × D × H): approx. 2,450 × 2,200 × 2,750 mm Distance between Uprights: 1,580 mm Table Height: 900 mm ==== Working Area Table Size: 1,500 × 2,000 mm Max. Installation Height: 800 mm Ram Stroke: 400 mm Ram Extension: 300 mm ==== Movement System Lateral Cylinder Adjustment: ±750 mm Bridge Travel: 1,500 mm Operation: manual adjustment (cylinder and bridge) ==== Hydraulic Cylinder Max. Operating Pressure: 320 bar Working Speed: 9 mm/s Return Speed: 17 mm/s ==== Hydraulics & Drive Motor Power: 15 kW Pump Capacity: 32 l/min Tank Volume: 140 l Hydraulic Components: DUPLOMATIC Filter: FILTREC Cooling: Air cooler ==== Control System Operation: manual via hand lever valve Integrated safety PLC Components: SIEMENS Optional: PLC S7-1200 with 7" touch panel, recipe management, pressure and position control ==== Safety Hydraulic overload protection Electronic overload protection Upper/lower limit switches CE-compliant design ==== Electrical Connection Main Supply: 400 V AC Control Voltage: 24 V DC Frequency: 50 Hz Total Connected Load: approx. 18 kW Control Cabinet: IP54 ##### Gsdsyzfuispfx Agfjua Fields of Application: straightening, press-fitting, forming, tool adjustment, steel construction, metal construction, mold making, automotive Hydraulic press, gantry press, straightening press, H-frame press, 200 T press, tryout press, tool tryout press, adjustable press, heavy-duty press The images shown are for sample purposes and may differ from the actual design.

Condition: new, pressing force: 300 t, For sale is a hydraulic portal straightening press (H-frame) from manufacturer Durendus with a maximum pressing force of 300 t. The machine features a table size of 1,500 × 2,000 mm, a maximum installation height of 1,000 mm, and a stroke of up to 600 mm, making it particularly suitable for straightening, alignment, and heavy forming applications in industrial environments. The machine shown here was built and delivered to a customer’s specification; we can manufacture this machine as a new unit on short notice. Available Options (upon request): The options listed below are based on completed customer projects and allow targeted adaptation of the machine to specific applications. The base machine is delivered in a functional basic configuration—in practice, it is most often expanded with additional features and configured to meet project requirements. Examples include: * Siemens S7-1200 PLC + 7” display for operator interface * Wireless remote control * Safety edge at the base of the portal columns (600 mm) * Table with T-slots * Motorized bridge positioning * Travel path extension * Larger open height * Light curtain under the bridge * Laser distance measurement * Lifting cylinder in the table ##### Technical Data & Information: Hydraulic Portal Straightening Press – H-frame – 300 t ==== General Specification - Designation: Hydraulic portal straightening press - Type: H-frame / portal press - Manufacturer: DURENDUS - Pressing force: 300 t (adjustable) - Distance between uprights: 1,580 mm - Table size: 1,500 × 2,000 mm - Bridge travel: 1,500 mm - Lateral travel (center): ±500 mm - Max installation height: 1,000 mm - Table height from floor: 950 mm - Ram extension: 200–400 mm - Total weight: approx. 9,500 kg ==== Hydraulic Cylinder - Piston stroke: 0–600 mm - Max working pressure: 250 bar - Return speed: 16 mm/s - Ram speed: 10 mm/s Gujdeyzfkqepfx Agfsa ==== Hydraulics & Drive - Hydraulic pump: ASC - Pump capacity: 60 l/min - Tank volume: 250 l - Motor rating: 11 kW - Pressure accuracy: ±5 bar - Hydraulic unit: top-mounted - Valve technology: DUBLOMATIC - Filter: FILTREC - Oil level monitoring: electronic - Cooling: air cooling ==== Movement System - Bridge drive: 2 × 2.2 kW - Lateral cylinder movement: 0.75 kW - Movable bridge: yes - Laterally movable cylinder: yes ==== Control System - PLC: SIEMENS S7-1200 - Operation: pendant panel / wired remote control - Control: manual valve + electric control - Optional: 7" touchscreen - Optional: wireless remote control - Optional: up to 99 programs storable ==== Safety - Hydraulic overload protection - Electronic overload protection - End travel safety switches (top/bottom) - Safety PLC - CE-compliant design - Optional: safety edge on portal columns ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 11 kW - Total connected load: approx. 18 kW Fields of application: Straightening, tool and mold making, steel construction, heavy forming, maintenance, try-out, alignment work (Hydraulic press, hydraulic straightening press, portal press, portal straightening press, 300-ton press, 300 t press, H-frame press, heavy-duty press, industrial press, forming press, straightening system) ##### The images shown serve as samples and may deviate from the actual configuration.

Condition: used, Year of construction: 1989, pressure 16 t throat 200 mm stroke 160 mm dayligth 490 mm table surface area 1300 (3300) x 250 mm table height over floor 935 mm ram surface 65 mm power requirement 4,0 kW weight of the machine ca. 2,2 t required space 1,4 (5,4) x 1,3 x 2,4 m with oilhydraulic drive, shaft straightening device length of straightening table approx. 1300 + 2x2000 mm Guodoyx Ii Repfx Agfoa can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1975, pressure 40 t throat 280 mm stroke 160 mm dayligth 420 mm table surface area 2000 x 500 mm table height over floor 870 mm ram surface 85 mm power requirement 7,5 kW weight of the machine ca. 3,2 t required space 1,7 x 2,0 x 2,3 m Gedeyx Ihaopfx Agfeua with oilhydraulic drive, shaft straightening device, manual lever control can be inspected in running condition in our warehouse

Condition: used, input voltage: 400 V, C-profile press for industrial company. Make: Unknown Gedpfxjyzb Urj Agfjua Model: Unknown Weight: around 4000 kg Capacity: approximately 300 t

Condition: excellent (used), Hydraulic straightening press Gujdpfx Asywh Dfsgfja Brand: S.A.R.L. Constructeur Capacity: 90 t Maximum installation height: 1000 mm Stroke: 450 mm Table diameter: 600 mm Internal width: 1000 mm 380 Volt Year of manufacture: 2007 Transport dimensions: Length: 1600 mm Width: 650 mm Height: 2430 mm Weight: 900 kg

Condition: good (used), Year of construction: 1980, Straightening force: 100 t Thrust: 325 mm Table size: 490 x 3500 mm Max. stroke: 160 mm Pillar speed up: 206 mm/s Pillar speed down: 68 mm/s Hydraulic drive: 380 V, 15 kW Space required: 3500 x 1650 x 2760 mm Weight: 5500 kg Gjdovgcpcepfx Agfeua

Condition: new, 300 kN stroke length max. 235 mm 200x24 mm bending capacity max. - round 60x4,0 mm toolpiece height max. 250 mm 660x1250 mm work height max. 900 mm return speed 20 mm/sec working feed 10 mm/sec Godpfxeyv I Tde Agfeua total power requirement 3 kW weight 950 kg Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Equipment: - Stamp, smallest U = 145 mm 85 °    H = 250 mm, R = 5 mm - Quick change Monomatrize 85 °    H = 250 mm, V = 63 mm

Condition: new, square edge steel 20x20 / 25x25 mm flat steel 100 x 7.0 mm round bar steel 22.0 / 27.0 mm L-beam 100 x 10 mm weight of the machine ca. 33.0 kg. range L-W-H 900 x 430 x 310 mm Features - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - Bending performance "cold" : Flat steel 100 x 7 mm 65 x 12 mm Round steel 22.0 mm Square steel 20 x 20 mm Angle steel 100 x 10 mm - - - - - Bending capacity "hot" : Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 15 mm - - - - - Scope of delivery - Bending plate - Angle stop stepless Gujdpexcuyhofx Agfsa - Clamping block with eccentric clamp - Material stop

Condition: new, pressing force: 300 t, 300 T Portal Straightening Press – Portal Press – 3,500 × 2,000 mm Table, 1,000 mm Open Height The machine shown here has already been built and delivered to a customer as a custom order. We can manufacture this machine for you again on short notice – and are happy to accommodate individual options. This is a hydraulic portal press with 300 t pressing force, designed for straightening, assembly, and machining processes on large-format components. Base price: €142,000 net Options (on request): The listed options are based on completed customer projects and enable targeted adaptation of the machine to the specific application. The base machine is a functional standard version – in practice, it is usually expanded with additional features and configured to project requirements. - Table plate with T-slots according to DIN 650 - 75 mm table plate - Servo-hydraulics (energy-efficient operation) - SIEMENS S7-1200 control with 7" touch panel - Wireless remote control (with or without display) - Air/oil heat exchanger - Ejector system in the table (various configurations possible) ===== Technical Data & Information: ==== General Information Design: Portal press Pressing force: 300 t (adjustable) Gsdpeyxnzyjfx Agfeua Total weight: approx. 10,500 kg Overall dimensions (W × D × H): 3,285 × 3,520 × 3,500 mm ==== Working Area Table size: 3,500 × 2,000 mm Open height: 1,000 mm Frame clearance: 2,100 mm ==== Table & Ram Table height: 750 mm (without table plate) Ram stroke: 0–400 mm (adjustable) Extensions: 200 / 400 / 600 mm Cylinder diameter: Ø 310 mm Piston rod: Ø 220 mm Transverse cylinder travel: ±900 mm Longitudinal portal travel: 3,000 mm ==== Speeds Idle speed: 10 mm/s Return speed: 50 mm/s Portal travel speed: max. 33 mm/s ==== Hydraulics & Drive Pump capacity: 70 l/min Main motor: 7.5 kW Hydraulic tank: 200 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Standard operation: pendant control Optional: SIEMENS S7-1200 control Connection: 400 V / 50 Hz Total connected load: approx. 15 kW ==== Equipment - CE certification - Safety limit switches - Overload protection (electrical & hydraulic) - Cable drag chain system - Two-coat paint finish (RAL colors selectable) ===== Straightening of large steel structures, vehicle manufacturing, maintenance, assembly work, special constructions. Portal press, straightening press, hydraulic press, 300 ton press, large table press, metalworking Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German Machinery Directives, European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds on these standards. Our key strength is special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Condition: new, pressing force: 300 t, 300 T Portal Straightening Press – Portal Press – 3,000 × 2,000 mm Table, 1,000 mm Clear Height The machine shown here was built and delivered as a custom order. We can manufacture this machine for you on short notice – taking individual options into account. This is a hydraulic portal press with 300 t pressing force, designed for straightening, assembly, and processing of large-format components. Base price: €102,000 net Optional Equipment (on request): The listed options are based on realized customer projects and allow precise adaptation of the machine to your specific application. The base machine is a functional standard version, which in practice is usually enhanced with additional features and project-specific configurations. - Table plate with T-slots according to DIN 650 - 75 mm table plate - Servo-hydraulics (energy-efficient operation) - SIEMENS S7-1200 controller with 7" touch panel - Radio remote control (with or without display) - Air/oil heat exchanger - Ejector system in the table (various versions) ==== Technical Data & Information: ==== General Specifications Type: Portal Press Pressing force: 300 t (adjustable) Total weight: approx. 8,500 kg Overall dimensions (W × D × H): 3,285 × 3,020 × 3,500 mm ==== Working Area Table size: 3,000 × 2,000 mm Clear height: 1,000 mm Frame gap: 2,100 mm ==== Table & Ram Table height: 750 mm (without table plate) Ram stroke: 0–400 mm (adjustable) Extensions: 200 / 400 / 600 mm Cylinder diameter: Ø 310 mm Piston rod: Ø 220 mm Transverse cylinder movement: ±900 mm Portal longitudinal travel: 2,500 mm ==== Speeds Idle speed: 10 mm/s Return speed: 50 mm/s Portal travel speed: max. 33 mm/s ==== Hydraulics & Drive Pump capacity: 70 l/min Main motor: 7.5 kW Hydraulic tank: 200 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Standard operation: lever control Optional: SIEMENS S7-1200 control Connection: 400 V / 50 Hz Total connected load: approx. 15 kW ==== Features - CE certification - Safety limit switches - Overload protection (electrical & hydraulic) - Drag chain system - Two-component coating (RAL colors selectable) Guedpeyxnw Uefx Agfsa ===== For straightening steel structures, vehicle manufacturing, maintenance, assembly work, special constructions Portal press, straightening press, hydraulic press, 300 ton press, industrial press, metalworking Looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety regulation NR 12, which is based on these standards. Our major strength is special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, pressing force: 16 t, total width: 700 mm, center height: 1,050 mm, working height: 1,050 mm, Automatic straightening system, mechanically overhauled, fitted with new SIMATIC S7-1500 control and Drive Controller CPU 1504D TF. Max. centre distance 500 mm, straightening force 16 t, straightening stroke 20 mm, idle stroke 95 mm, working height 1050 mm, power rating 10 kVA, average consumption 1.3 kW. Option: The machine can be equipped with a lifting beam conveyor (through the machine), as well as infeed/outfeed belts according to customer requirements, and also with a safety fence. Guodpfx Agsxldiqofea Currently, the machine is equipped with 1 straightening station; expansion is possible.

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Portal Straightening Press – Manufacturer: Hidrobrasil – 200 t Gantry Press – Table 4,000 × 2,000 mm For sale is a versatile portal straightening press from Hidrobrasil featuring a pressing force of 200 t. The machine is equipped with a large table area of 4,000 × 2,000 mm, a laterally movable cylinder, and a longitudinally adjustable bridge structure, making it ideal for large-format straightening, assembly, and special applications. ==== Technical Data + Information: Portal Straightening Press Hidrobrasil – 200 t Gantry Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry press - Pressing force: 200 t - Operating pressure: max. 285 bar ==== Working Area - Table size: 4,000 × 2,000 mm - Clear width / height: 1,500 mm - Column spacing: 2,050 mm - Stroke: 1,500 mm ==== Movements & Travel Paths - Lateral cylinder adjustment: max. 1,450 mm - Longitudinal bridge movement: max. 2,800 mm - Approach speed: 20 mm/s - Working speed: 2 mm/s ==== Construction & Equipment - Hydraulic power unit mounted on top of the press - Hydraulic block and valves by Bosch Rexroth - Air and oil filters by Filtrec - Combination air and water cooling - Stroke cylinder integrated in the worktable - Machine control via wireless remote (2-button system) - Anti-rotation device for the cylinder - Machine status and diagnostics system with touchscreen ==== Auxiliary Stroke Cylinder System - Number of stroke cylinders: 10 units - Rod diameter: 25 mm - Stroke: 80 mm - Controlled via hydraulic system or control unit ==== Control & Operation - Siemens PLC: S7-1200 - Siemens Touchscreen: KTP900 – 9" - Up to 99 programs storable - Functions: - Setting stroke, pressure, and hold time - Decompression time - Piece counter - Alarm management - Real-time monitoring of all parameters - Positioning accuracy: ± 0.1 mm ==== Safety & Monitoring - Emergency stop system - Two-hand/wireless operation with safety release - Safety stripe on gantry columns - Hydraulic oil temperature monitoring - Automatic shutdown at overtemperature (> 65°C) - Filter monitoring - CE compliant ==== Hydraulics - Main drive power: 5.5 kW - Oil volume: not supplied - Oil temperature control with automatic cooling ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Components: Siemens, Allen Bradley, Phoenix ===== Straightening work, large components, assembly work, special purpose machine construction, steel construction, maintenance, press-fitting applications Gantry press, straightening press, hydraulic press, industrial press, special machine, tool matching press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Guidelines as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they comply with all aspects of the Brazilian national safety guideline NR 12, which builds upon them. Our core expertise lies in special purpose machine construction and press automation. The hydraulic systems of our presses primarily utilize components from leading European manufacturers. Gujdpfx Asxrb Nbjgfsa

Condition: new, stroke lenght (max.): 400performance of pump: 45cc-65motor: 22table height: (ohne Auflageplatte) 750 mm - (mit Auflageplatte) 820table area: 3500 mm x 2000 mm - Lichteweite : 2200Travel bridge: 2800motor: (IE-3) 22Return speed: 50messurements (LxWxH): 3500 x 3200 x 3600Cylinder: Ø 370- Capacity: 3000kN. (280 bar – 300 ton) - Cylinder: Ø 370mm. - Table surface: 3000 x 2000mm - Clearance: 2200mm. - Travel bridge: 2500mm. - Lateral travel cylinder: 900 + 900mm. away from the middle. (1800mm.) - Installation height: max. 1200mm. (distance table or support plate to cylinder piston) WITHOUT MANDS - Stroke length: 400mm. - Pump: 45cc – 65Lt./min. - Forward speed: 10 - 5mm / sec. - Return speed: 50 mm / sec. - Engine: 22kw. (IE-3) - Table height: 750mm (without support plate) - 820mm. (with support plate) Accesories: - Hydraulics: Rexroth (CE valves) - Control system: Siemens S7-1200 - Siemens KTP.7'' screen - Control cabinet is mounted on the side wall of the bridge - Swiveling control panel - Pressure adjustable via screen (50 - 300 t) - Speed adjustable via throttle valve - Cylinder clad in chrome - Remote control (with cable) - Stroke length adjustable via distance sensors - 400V 50HZ 3 phases - Anti-rotation device for cylinder - Cylinder can be moved sideways via drive motor - Bridge can be moved via drive motor - Stairs Godpfx Ajr Etulsgfjua - Light barrier protection for bridge areas - Cylinder piston mandrel: Ø 200 / 400 / 600mm. Long , Extension mandrels (3 pieces) are included

Year of construction: 2023, condition: new, DPM 1070 x 150ton Hydraulic Garage Press Cap: 100ton Many other sizes and capacities available. • Steel welded frame • Easy to operate • Stop at any position • Pressure monometer • Safety valve against overloading • V-Blocks standard ( 2 pcs. ) Guedpogyta Hefx Agfsa • Adjustable table height • Table up-down movement attachment • Control with special joystick • Right- Left moving piston by hand (DK) • Built According to EC Safety Directives and has CE • User’s manual

Condition: used, pressure 100 t Guodpjyutqwjfx Agfsa stroke 300 mm Cylinder 205 mm distance between table / ram 520 mm table surface area 1100X350 mm ram surface 350X350 mm total power requirement 7,5 kW with roller conveyor, 1: Roller conveyor: 2000x500 inlet 1: Roller conveyor: 2000x500 outlet The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2021, machine/vehicle number: HB 2022-A-073, pressing force: 300 t, Portal straightening press with 300 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 55 mm/sec c) table size 2500x1600mm d) open height 700 mm e) total size approx. LBH 4500 x 2300 x 3700 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) table in grid construction,with T grooves according to customer's request, otherwise 22mm i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 50 T to 300 T via MONITOR k) bridge moves by two gear motors, via racks l) Cylinder moves to the left and to the right via toothed racks m) Machine body double painted n) Cylinder induction hardened Type of construction Press design PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 3,000 kN Free ripping force max. 500 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 700 mm Stroke and min. opening 700 mm/ 0 mm Table height above floor approx. 9ß0 mm Height above floor (headroom) approx. 3700 mm Hall height min. 5.000 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 22 T Speeds Fast closing with 17 mm sec. Pressing speed 8 mm sec. Opening 55 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel after max. 78 db(A) Guodpfeh Agnuex Agfoa DIN 45635-T16-KL3 Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 350 bar Pressing pressure build-up time 02. mz sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 93 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor IE3 22 kW Total connection Approx. 30 kW

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 400 t, Gantry straightening press with 400 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 60 mm/sec c) table size 6000x3000mm d) open height 1500 mm e) total size approx. LBH 6000 x 5000 x 4500 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table in grid construction, i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 60 T to 400 T via MONITOR k) Bridge moves by two gear motors, via toothed racks l) Cylinder moves to the left and right via toothed racks m) Machine body powder coated, or double painted n) T-slots according to customer requirements o) cylinder induction hardened PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 4000 kN Free ripping force max. 600 kN Gedehyc Nwspfx Agfsua Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 1500 mm Stroke and min. opening 1500 mm/ 0 mm Table height above floor approx. 900 mm Height above floor (headroom) approx. 4500 mm Hall height min. 5500 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 52 T Speeds Fast closing with 17 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 280 bar Pressing pressure build-up time 2-3 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24V DC Frequency 50 Hz Connection hydraulics Main motor IE3 30 kW Total connection Approx. 35 kW

Condition: new, Year of construction: 2026, machine/vehicle number: -, functionality: fully functional, pressing force: 40 t, Portal Straightening Press – Manufacturer Hidrobrasil – 40 t Gantry Press – Table 635 × 555 mm For sale is a portal straightening press by Hidrobrasil, offering a pressing force of 40 t. This machine is based on a proven design, can be newly manufactured at short notice, and individually customized. It is ideal for straightening, assembly, pressing-in, and pushing-out operations. ==== Technical Data & Information: Portal Straightening Press Hidrobrasil – 40 t Gantry Press ==== General Information - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry / Frame Press - Pressing force: 40 t - Machine weight: approx. 1,500 kg - Dimensions (W × D × H): 1,880 × 900 × 2,300 mm ==== Working Area - Max. opening width: 500 mm - Table-to-floor distance: 1,200 mm - Column spacing: 900 mm ==== Table System - Table size: 635 × 555 mm - Table thickness: 70 mm - Versions: open, closed, or with T-slots (optional) ==== Hydraulic Cylinder - Stroke: 550 mm - Cylinder diameter: Ø 150 mm - Piston rod: Ø 90 mm - Operating pressure: max. 280 bar ==== Hydraulics - Pump: ASC - Flow rate: 12 l/min - Motor power: 4 kW - Return speed: 16 mm/s - Idle speed: 10 mm/s - Oil tank capacity: 120 l - Hydraulic block / valves: Hydropack - Pressure gauge: manometer - Pressure adjustment: adjustable - Pressure switch: included Gedpfx Agjyia D Rofoua - Power unit: side-mounted ==== Operation - Hand lever operation - Sensitive speed control - Pressure setting via rotary knob ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connected load: approx. 5 kW ==== Control Cabinet - Protection class: IP54 - Reserve space: approx. 30 % - Operating mode selector switch: lockable - Components: Siemens, Allen-Bradley, Sick ==== Equipment and Features - Integrated tool holder in the press ram (up to Ø 250 mm) - Custom table versions available - Construction can be adapted to customer requirements ==== Standards and Documentation - CE documentation - Spare parts lists - Electrical diagrams and parts lists (digital) - Standards: - 2006/42/EC Machinery Directive - 2014/35/EU Low Voltage Directive - 2014/30/EU EMC Directive - EN ISO 16092-1 / -3 - EN 60204-1 - EN ISO 12100 - EN ISO 4413 ==== Straightening, assembly, pressing-in, pushing-out, workshop applications, maintenance, series production Gantry press, straightening press, hydraulic press, workshop press, assembly press, insert press, frame press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety requirements. Additionally, our presses surpass Canadian and European safety requirements by fully complying with the national Brazilian safety directive NR 12, which builds upon these standards. Our major strengths are custom machine building and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. The hydraulics of our presses predominantly feature components from leading European manufacturers.

Condition: new, Year of construction: 2025, pressing force: 20 t, Straightening Press – Manufacturer Durendus – DCS-20 – 5–20 t C-Frame Single-Column Press – Table 500 × 600 mm For sale is a compact single-column straightening press (C-frame) from Durendus, model DCS-20, equipped with an adjustable pressing force from 5 to 20 t. The machine features a table size of 500 × 600 mm, a maximum installation height of 700 mm, and boasts a robust, low-maintenance design, making it ideal for straightening, assembly, and press-fit operations. ===== Technical Data & Information: Straightening Press Durendus DCS-20 – 5–20 t Single-Column Press ==== General Information - Manufacturer: Durendus - Model: DCS-20 - Design: Single-column press / C-frame - Pressing force: 5 – 20 t (adjustable) - Machine weight: approx. 1,900 kg - Dimensions (W × D × H): 1,150 × 1,250 × 2,469 mm ==== Working Area - Installation height: max. 700 mm - Stroke: 0 – 500 mm (adjustable) Godpjyghvfsfx Agfjua - Table height: 800 mm ==== Table and Ram - Table size: 500 × 600 mm - Ram size: 500 × 600 mm - T-slots: DIN 650 – 18 mm (or per customer specification) ==== Hydraulic Cylinder - Cylinder diameter: Ø 100 mm - Piston rod diameter: Ø 60 mm - Operating pressure: max. 250 bar - Return speed: 50 mm/s - Idle speed: 25 mm/s - Pressure build-up time: max. 2 s (steel on steel) ==== Hydraulics - Hydraulic pump: Rexroth, 11 l/min - Motor power: 4 kW - Oil tank volume: 150 l - Hydraulic block / valves: Hydropack - Filter: Filtrec - Oil level monitoring: electronic oil level switch - Hydraulic unit: mounted top rear - Pressure accuracy: ± 5 bar ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connected load: approx. 4 kW ===== Straightening work, assembly work, press-fit operations, workshop applications, maintenance, small-batch production Straightening press, single-column press, C-frame press, hydraulic press, workshop press, assembly press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machinery guidelines, as well as European Machinery Directive 2006/42/EC, EC standards, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements by fully complying with Brazil's national safety standard NR 12, which is based on these requirements. Our greatest strength is special-purpose machine construction and press automation. We offer tailor-made hydraulic presses at surprisingly attractive prices. For the hydraulics, we predominantly use components from leading European manufacturers.