Condition: new, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 2404605 + 2404606, A double package of two new robots will be auctioned! The robot will be delivered free of charge. TECHNICAL DETAILS Number of axes: 6 Max. joint payload: 220 kg Additional forearm load: 50 kg Horizontal reach: 1033 - 2701 mm Motion ranges Axis 1 stroke: ± 180° Axis 2 stroke: +95° / -75° Axis 3 stroke: -10° / -246° Axis 4 stroke: ± 2700° Axis 5 stroke: ± 125° Axis 6 stroke: ± 2700° Precision Repeatability: 0.08 mm Mechanics and design Tool coupling flange: ISO 9409 – 1 – A 160 Robot weight: 1220 kg Protection class: IP65 / IP67 Control unit: C5G-ACC3-E, CR17930685 Teach Pendant: GTP5S1 TP5 Teach Pendant, Cable Length: 10 m, CR17431986 System Software: Comau Controller System Software, CR17926000 System Documentation: DVD with Documentation, CR17930160 Control Software: "C5G Open" Software, CR17926221 Communication & Interfaces Ethernet I/P Master Module: CR10143983 EtherNet/IP Adapter [Slave]: CR10144083 PNMI Profinet Multibus Interface: CR17130964 Powerlink Card for APC: C5G-PCA C5G-PFG-BCO Bus Module: Coupler Bus Module, CR10146383 Cables & Connections Standard Power Cable: C5G - 24 VDC, CR17240260 Powerlink Ethernet cable (1.5 m): CR17231863 Multibus cable (40 m): CR18567666 Cable set for large robot (40 m): CR18945885 Multibus & Air connection kit (axis 6 to gripper): 16689580 Kljlhcewbqlmscqlor Mechanical Equipment Adjustable mechanical end stop axis 1: CR82342400 Mounting accessories (screws, pins): CR82342700 Distribution panel cover: CR82352200 Safety & Options Allen Bradley Ethernet IP Safe Module: CR17131681 Handling connection kit NJ4 Ethernet/IP: CR18970380

Condition: good (used), Year of construction: 2020, operating hours: 1,960 h, 6-axis articulated Robot & Controller - 9 units available Max Reach: 650mm Max Payload: 5kg Voltage: 1Phase 200-240VAC Frequency: 50/60Hz Max Current: 10Amp Short Circuit Rating: 1.5kA Note - Price mentioned is Ex works. Any expenditures incurred for packaging, handling and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. Kelhevzv N Ejccqlelr The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: used, Year of construction: 2019, Axis specifications Arm length 300 mm 300 mm 200 mm 300 mm – Rotation angle +/-130 ° +/-145 ° – +/-360 ° AC servo motor output 400 W 200 W 200 W 200 W Deceleration mechanism Speed reducer Harmonic drive Harmonic drive Ball screw Harmonic drive Transmission method Motor to speed reducer Direct-coupled Speed reducer to output Direct-coupled Repeatability Note 1 +/-0.01 mm +/-0.01 mm +/-0.004 ° Maximum speed 8.4 m/sec 2.3 m/sec 1.7 m/sec 1700 °/sec Maximum payload 10 kg Standard cycle time: with 2kg payload Note 2 0.46 sec R-axis tolerable moment of inertia Note 3 0.30 kgm2 User wiring 0.2 sq × 20 wires User tubing (Outer diameter) ϕ 6 × 3 Travel limit 1.Soft limit 2.Mechanical stopper (X,Y,Z axis) Robot cable length Standard: 3.5 m Option: 5 m, 10 m Weight 31 kg Kjlhcowdtl Iscqljlr Note 1. This is the value at a constant ambient temperature. (X,Y axes) Note 2. When reciprocating 300mm in horizontal and 25mm in vertical directions. Note 3. There are limits to acceleration coefficient settings. See P.539.

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V -Control cards/single modules: see photos -Dimensions: 480/260/H365 mm -Weight: 24 kg Kslhccqskyy Uujljlr

Condition: used, Year of construction: 2012, A little-used MOTOMAN welding robot from 2012 with Kemppi power supply. Robot disconnected. Industrial robot Motoman NX100 with table Fixing: floor Protection class: IP54 Kemppi Kemparc Pulse 450 welding source Operating range: 20 - 450A Welding voltage: 33 - 36.5 V Kslhjr Akwieccqlolr Components: torch, cables, wire feeding mechanism, wire reel with bracket. If you have any further questions, we will be happy to answer them.

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: R-00411, arm reach: 3,500 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, payload: 100 kg, Refurbished FANUC R-2000iB/100P manufactured in 2008.10. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Kjlewdtz Ashccqlelr Model: R-2000iB/100P Model Number: A05B-1329-B231 Year of Manufacture Robot: 2008.10 Warranty term (months): 12   Payload (kg): 100 Reach (mm): 3500 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Rack Mount Weight (kg): 1560   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2008.10 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 12  

Condition: new, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 2404603, load capacity: 220 kg, arm reach: 2,701 mm, The robot will be provided free of charge. TECHNICAL DETAILS Number of axes: 6 Max. joint payload: 220 kg Additional forearm load: 50 kg Horizontal reach: 1033 - 2701 mm Motion ranges Axis 1 stroke: ± 180° Axis 2 stroke: +95° / -75° Axis 3 stroke: -10° / -246° Axis 4 stroke: ± 2700° Axis 5 stroke: ± 125° Axis 6 stroke: ± 2700° Precision Repeatability: 0.08 mm Mechanics and design Tool coupling flange: ISO 9409 – 1 – A 160 Robot weight: 1220 kg Protection class: IP65 / IP67 Control unit: C5G-ACC3-E, CR17930685 Teach Pendant: GTP5S1 TP5 Teach Pendant, Cable Length: 10 m, CR17431986 System Software: Comau Controller System Software, CR17926000 System Documentation: DVD with Documentation, CR17930160 Control Software: "C5G Open" Software, CR17926221 Communication & Interfaces Ethernet I/P Master Module: CR10143983 EtherNet/IP Adapter [Slave]: CR10144083 Klslhccqjwbqgweljr PNMI Profinet Multibus Interface: CR17130964 Powerlink Card for APC: C5G-PCA C5G-PFG-BCO Bus Module: Coupler Bus Module, CR10146383 Cables & Connections Standard Power Cable: C5G - 24 VDC, CR17240260 Powerlink Ethernet cable (1.5 m): CR17231863 Multibus cable (40 m): CR18567666 Cable set for large robot (40 m): CR18945885 Multibus & Air connection kit (axis 6 to gripper): 16689580 Mechanical Equipment Adjustable mechanical end stop axis 1: CR82342400 Mounting accessories (screws, pins): CR82342700 Distribution panel cover: CR82352200 Safety & Options Allen Bradley Ethernet IP Safe Module: CR17131681 Handling connection kit NJ4 Ethernet/IP: CR18970380

Condition: good (used), Year of construction: 2019, operating hours: 1,960 h, machine/vehicle number: 594-02462, 4-axis Scara Robot & Controller Max Reach: 600mm Kelhccqsvzv Hqololr Max Payload: 5.5kg Voltage: 1Phase 200-240VAC Frequency: 50/60Hz Max Current: 10Amp Short Circuit Rating: 1.5kA Note - Price mentioned is Ex works. Any expenditures incurred for packaging, handling and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: new, Year of construction: 2017, The KR 3 R540 is designed for a rated payload of 2 kg in order to optimize the dynamic performance of the robot. With reduced load center distances and favorable supplementary loads, a maximum payload of up to 3 kg can be mounted. Technical data Maximum reach 541 mm Kslhcewdq Umscqljlr Maximum payload 3 kg Pose repeatability (ISO 9283) ± 0.02 mm Number of axes 6 Mounting position Floor; Ceiling; Wall Footprint 179 mm x 179 mm Weight approx. 26.5 kg

Condition: ready for operation (used), Siemens 6SN1123-1AA00-0BA1 SN: ST-V72014226 LT module, serial number as per photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, The agreed sales discounts do not apply to this article. Please ask for price separately! Kolhccqjudqzislelr

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00441, arm reach: 3,060 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, payload: 185 kg, Refurbished FANUC R-2000iB/185L manufactured in 2012.12. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Kelhjwdtuvjccqlelr Model: R-2000iB/185L Model Number: A05B-1329-B211 Year of Manufacture Robot: 2012.12 Warranty term (months): 12   Payload (kg): 185 Reach (mm): 3060 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1290   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.12 RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 12  

Condition: refurbished (used), Year of construction: 2018, Specifications Brand Fanuc Model M-20iA Type Robot Arm Axes 6 Kjlhccqowdq Ugslolr Payload 20 kg Reach 1811 mm Repeatability 0.08 mm Weight 250 kg The Fanuc M-20iA robot is a 6-axis robot arm, it has a payload of 20 kg and a reach of 1811 mm.

Condition: ready for operation (used), Fanuc A06B-0371-B075 AC servo motor, serial no. according to photo, used, normal signs of wear, 100% functional, scope of delivery according to photos Klelhji D H D Usccqljr

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00349, arm reach: 2,650 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, payload: 350 kg, Refurbished FANUC M-900iA/350 manufactured in 2012.02. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/350 Model Number: A05B-1327-B501 Year of Manufacture Robot: 2012.02 Warranty term (months): 12   Payload (kg): 350 Reach (mm): 2650 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1800   Klolhccjwdtuceqlor Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.02 RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: as good as new (ex-display), Year of construction: 2020, KR 10 R1100-2 Article No.: 290003 Kljlhcswdq Uajcqljr Boost your productivity with the reliable small robot from KUKA for every application. 10 kg 1101 mm Floor, Ceiling, Wall, Desired angle

Condition: new, Rexroth SM 25/50-TA servo module 1070077376-111, SN, unused in opened original packaging, 100% functional, scope of delivery as per photos Klslhoi Ec Alsccqlor

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00417, arm reach: 3,100 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, payload: 260 kg, Refurbished FANUC M-900iA/260L manufactured in 2012.12. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/260L Model Number: A05B-1327-B503 Year of Manufacture Robot: 2012.12 Warranty term (months): 12 Kelswdtt Sehccqljlr   Payload (kg): 260 Reach (mm): 3100 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1720   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.12 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2020, The Epson LS6-602S, a 4-axis SCARA robot with a 6 kg payload capacity and 600 mm reach, has been assessed and found to be in optimal condition. Prior to shipment, the robot will undergo comprehensive testing and meticulous packaging procedures to ensure its integrity during transit. Kslhccowdl S Heqlslr

Condition: ready for operation (used), Heidenhain EXE-PLATINE 3-axis .: 257 411 01 , :6972758 as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Klelhsi Eainsccqlor

Condition: used, Year of construction: 2018, The UR3 collaborative robot, a 6-axis arm with a 3 kg payload and 500 mm reach, is offered for sale. Having been utilized primarily for demonstrative purposes with short working hours, the robots are in excellent condition. Prior to shipment, each robot will undergo comprehensive testing and be securely packaged. Kjlhswdl Sgeccqlslr

Condition: ready for operation (used), Endress + Hauser FMU 671 Z level indicator Nivosonic V3.1 , used, normal signs of wear, 100% functional, scope of delivery according to photos Kelhccqsi D Ur Hjlolr

Condition: used, Year of construction: 2017, The UR5 robot is a 6-axis robot arm, it has a payload of 5 kg and a reach of 850 mm Kolhccqewdl Rpjljlr 4 units of UR5 collaborative robots are currently available for purchase. Prior to shipment, each unit will undergo thorough testing, cleaning, and professional packaging to ensure optimal condition upon arrival.

Condition: ready for operation (used), Endress + Hauser FDL 30-FGB2A7R Liquiphant II level meter, serial no. acc. to photo, used, normal signs of wear, 100% functional, scope of delivery acc. to photos Kjlhccqsi D Ur Aslolr

Condition: used, Year of construction: 2019, Universal Robots UR10 cobot is an industrial robotic arm designed to perform the toughest tasks with the highest precision. The robot has a carrying capacity of 10KG. Currently, six UR10 collaborative robots, manufactured between 2019 and 2020, are available in our inventory. These units, previously utilized for CNC pickup operations, are in excellent condition. Recorded operational hours range from 500 to 1100 days; however, actual usage is estimated at approximately half of the recorded time due to the previous user's operational practices. Kelhccewdl Izjqljlr

Condition: ready for operation (used), Endress + Hauser Nivosonic FMU 671Z/676 Z - FMU 671Z / 676 Z level indicator, serial no. acc. to photo, used, normal signs of wear, 100% functional, scope of delivery acc. to photos Kljlei D Ur Rjhccqljr