Used Can Press Pneumatic for sale (40,850)

Condition: new, Year of construction: 2025, functionality: fully functional, degree of automation: automatic, Pneumatic press for raw dried delicacies. Made completly of stailes steel. Powered by air- 6 bar Measurments: by client demands Kodpowqcbfofx Ah Ejdt

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Kodpfetrpiijx Ah Esdt Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: used, Year of construction: 2019, machine/vehicle number: 269913, functionality: fully functional, power: 0.5 kW (0.68 HP), input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, total length: 1,140 mm, total width: 1,380 mm, total height: 1,440 mm, overall weight: 230 kg, Equipment: CE marking, PONY BP-B Professional Garment Press (2019) Industrial Steam-Pneumatic Press for Trousers, Waistbands & Structured Garments The PONY BP-B is a professional industrial garment pressing machine manufactured by PONY S.p.A., Italy in 2019. Designed for continuous production environments, this steam-pneumatic press delivers high-quality finishing for trousers, waistbands, jackets, coats, and other structured garments. The machine combines steam, compressed air, and an integrated vacuum system to produce consistent, wrinkle-free finishing results with high productivity. The machine has been used in professional garment manufacturing and remained fully operational until the factory shutdown. Technical Specifications • Manufacturer: PONY S.p.A. • Model: BP-B • Year: 2019 • Serial Number: 269913 • Country of Manufacture: Italy • Power Supply: 230 V, Single Phase, 50 Hz • Power Consumption: 0.5 kW • Working Steam Pressure: Up to 5 bar • Pneumatic Operation: External compressed air required • Vacuum System: Integrated Lowara vacuum unit • Weight: Approximately 230 kg Key Features • Professional steam-pneumatic garment press • Integrated vacuum extraction system • Steam-heated pressing head and buck • Designed for trouser tops, waistbands, jackets, and structured garments • Adjustable pneumatic pressing pressure • Foot pedal operation • Dual safety hand controls • Emergency stop button • Heavy-duty industrial construction • Suitable for continuous production environments • Includes • PONY BP-B garment press Kdedezkhy Ropfx Ah Eot • Integrated Lowara vacuum system • Steam and pneumatic connections • Foot pedal controls • Industrial cabinet base • Safety guards • Electronic controls Applications • Trouser finishing • Waistband pressing • Jacket finishing • Coat finishing • Workwear production • Garment manufacturing • Commercial laundries • Textile finishing departments Condition • Fully functional • Previously used in professional garment production • Serviced on 27.02.2026 • Video recorded in operation on 05.03.2026 • Good industrial condition • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for disconnecting steam, compressed air, and electrical connections, dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the machine's industrial utility connections. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation.

Condition: good (used), Year of construction: 2006, functionality: unexamined, Internal article number: 26057 Kdjdjzx Scxopfx Ah Est Pneumatic press Manufacturer: Schmidt Machine no.: 27-400084 Year of manufacture: 2006 Pressing force: 20 kN Stroke: 100 mm Safety distance: 348 mm Table: 200 x 150 mm Acceptance diameter: 20 mm Max. distance from table to acceptance point: approx. 270 mm Dimensions (L x W x H): 70 x 40 x 100 cm Weight: 60 kg Includes two-hand operation and emergency stop. Attention! The control unit for the machine is missing. The press would have to be operated purely pneumatically. You are welcome to inspect the machine while it is powered on, in our heated warehouse with over 500 m² of space.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, pressing force: 2 t, table width: 330 mm, table length: 350 mm, throat depth: 100 mm, air pressure: 6 bar, cylinder diameter: 28 mm, For sale in new condition HYUNDAE HP-2000 2t PNEUMATIC PRESS Brand: HYUNDAE MACHINERY & ELECTRIC CO.,LTD Type: HP-2000 Kedpfx Aovbfbwjh Eodt manufacturing of year: 2021 Max. pressing force: 2t open height:300mm Bolster Size: 350x330mm Stroke length: 100mm Cylinder diameter: 28mm built on a press stand Two-handed operation Voltage: 110V Air Connecting Hose Diameter:12mm

Condition: like new (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, pressing force: 1 t, table width: 200 mm, table length: 230 mm, total width: 400 mm, total height: 860 mm, overall weight: 105 kg, air pressure: 6 bar, FCP-C 10KN pneumatic press machine for sale in several pieces manufacturer: FCP-C pressing force 1 ton Stroke: 75-100 (mm) Air pressure 0.2-0.5 MPa Open height 320 (mm). two-hand operation table size: 200x230mm Shaft dimensions Bore diameter φ15H9 (mm) x depth 35 (mm). Speed ​​controller Low friction roller Rotation stop lever height: 880mm length: 360mm width:400mm weight: 105kg Many options (timing box with counter, load management device, etc.). ●The lowering speed of the press can be freely adjusted by the speed controller. ●Mechanical stop for bottom dead center adjustment. ●Inching operation valve for smooth forming. ●Air equipment is also standard. Kjdpfov E Sazsx Ah Eodt

Condition: used, Year of construction: 2005, Pneumatic Press Tox Inventory No. 3941 Kedpfx Ahszzrugs Ejdt Power Pack Press Tox Pressotechnik Type Stiskalnika 12050052 Year of Manufacture 2005 Type BS 15.30.100.06 No. 800322.35 * Two-hand control STE 003-03- 1/2" * Pressure force kN * Working stroke mm * Power stroke mm * Reach approx. 220 mm * Table size 450 x 400 mm * Installation height approx. 265 mm * 2 manual controls * Air inlet bar * Electrical connection 230 V * Space requirement: approx. W 700 x H 2050 x D 1050 mm * Weight approx. 500 kg

Condition: excellent (used), CATALOG NUMBER 7993 TECHNICAL DATA - Loading fields: 2 - Side clamps, manually adjustable: 2x4 pcs - Vertical pneumatic clamps: 2x4 pcs - Max length of glued elements: 2500 mm Kodpozxhczefx Ah Eodt - Max height of glued elements: 1330 mm - Max thickness of glued elements: 110 mm - Guides for gluing thin elements - Dimensions (L/W/H): 3000x1350x2000 mm - Weight: 900 kg ADVANTAGES – Two working zones – Gluing length of 2500 mm – Pneumatic cylinders – Guides for gluing thin elements – Unpainted – Mobile – on wheels – Used press, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at the rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2019, functionality: fully functional, pressing force: 5 t, stroke length: 60 mm, throat depth: 240 mm, ram plate width: 260 mm, ram plate length: 220 mm, overall weight: 233 kg, Equipment: CE marking, We are offering this used TOX PFHL 056.002.A.060 pneumatic knee-lever press, manufactured in 2019. Type: PFHL 056.002 Serial number: 439487.144 Description: Pneumatic press Maximum pressing force: 57.5 kN Total stroke: 60.0 mm Minimum air pressure: 3 bar Kdsdpfx Ahezy Uz Hj Est Maximum air pressure: 6 bar Weight: 233.0 kg Year of manufacture: 2019 With stroke counter Including tool holders Mobile base frame optionally available (see last image) Condition: see images, mechanically in perfect condition If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2008, Overview This NIKO VP11e is a horizontal pneumatic (membrane) press for whole or destemmed grapes, built in 2008 by NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia). The press is made entirely of stainless steel and runs a fully automatic, multi-stage pressing program once started: grapes are loaded through the two perforated cylinder doors or axially, an internal membrane inflates against the load to extract juice at progressively increasing pressure, and the cylinder rotates between stages to break up ("crumble") the pressed cake ahead of the next drain cycle. Juice drains into a wheeled collection pan under the cylinder with a pump connection; pomace is discharged by rotating the open door face-down over the pan. The press is mounted on castors for repositioning and remains still installed and under power at the seller's winery in Spain. It can be inspected in operation on request. Technical data - Manufacturer: NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia) - Model: VP11e - Year of manufacture: 2008 - Machine type: horizontal pneumatic (membrane) press for grapes, mobile on castors Ksdpezk Eqmefx Ah Esdt - Cylinder volume: 1,100 L (cylinder Ø 920 mm) - Juice drainage pan (tina) volume: 450 L - Loading doors: 2, 640 x 420 mm each - Max. working pressure: 1.7 bar - automatic multi-stage program (pre-press 0.3 bar, then 0.8 / 1.2 / 1.7 bar for whole white grapes; 0.3 bar, then 0.8 / 1.2 bar for destemmed, fermented red grapes) - Integrated blower for membrane aspiration: -0.2 bar vacuum / +0.2 bar pressure - Power: 2.9 kW, single-phase 230 V (1/N/PE), 50 Hz - Mechanical protection: IP55 - Noise level: < 75 dB - Dimensions: approx. 2,520 x 1,270 x H 1,560 mm (with axial loading extension; 2,350 mm long without it) - Weight: approx. 430 kg Equipment - Pneumatic membrane pressing cylinder with integrated aspiration blower - Wheeled juice drainage pan with pump connection - Electric control panel with automatic pressing programs (incl. draining cycle) - Axial loading option - Safety guard on drive elements, door interlock switch and STOP switch - OEM operating manual (Spanish) Condition Used - still installed and under power at the seller's winery. No further condition report has been provided by the seller; the machine can be inspected in operation on site. Availability Immediately. Location: Spain. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: excellent (used), CATALOG NUMBER 7992 TECHNICAL DATA Kodpfezmgk Tjx Ah Ejdt - Loading fields: 2 - Manually adjustable side clamps: 2x6 pcs - Pneumatic vertical clamps: 2x6 pcs - Max length of glued elements: 3600mm - Max height of glued elements: 1500mm - Max thickness of glued elements: 130mm - Guides for gluing thin elements - Dimensions (L/W/H): 4300x1570x2110mm - Weight: 1400kg ADVANTAGES – Two working zones – Gluing length 3600mm – Pneumatic actuators – Guides for gluing thin elements – Unpainted – Mobile – on wheels – Used press, in very good condition Net price: 14,900 PLN Net price: 3,550 EUR Net price calculated at 4.2 PLN/EUR exchange rate (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), functionality: fully functional, pressing force: 3 t, Force 32 kN, stroke 100 mm Kdjdpfx Ahozxmhps Eet

Condition: good (used), Year of construction: 1969, Pneumatic adhesive press, Maximum pressure: 10 bar, Adhesive bar with heating, Adhesive surface: 550 x 40 mm, Infinitely adjustable temperature setting for the lower and upper adhesive bars from 0 to 300 degrees Celsius, Infinitely adjustable adhesive dwell time, Drive power: 5 kW, 380 volts, 50 Hz, Two-hand operation with SIEMENS control. Pressure build-up via articulated lever, Kdsdpfx Ahod Dxqbe Est Maximum opening distance: approx. 30 mm.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, C-frame press for clinching technology Pressing force: 4.8 t Air pressure: 6 bar Total stroke: 32 mm Power stroke: 3 mm Kodpfxjy Ey Hze Ah Eedt No tools included

Year of construction: 2007, condition: excellent (used), Control: STE 328-89-1 1/2" complete TOX power pack: S75.160.200.12D table size: 996 x 695 mm installation height: 600 mm total stroke: 150 mm Power stroke: 10 mm Kodpfsp Aul Ajx Ah Eodt Weight: 5700 kg Electrical connection 230 V

Condition: used, Heavy-duty pneumatic gluing press with perforated sheet metal for flexible positioning of the press cylinders. One cylinder without a pressure shoe. Ksdpfjzryy Eex Ah Esdt Technical data: - Pressing area: approx. 2,800 x 1,000 mm - Width: 600 mm - Height: 1,800 mm - Press cylinders: 6

Condition: ready for operation (used), Year of construction: 1995, A sheet metal blank feeding press Alfons Haar for metal can production in the packaging industry is available. Press force: 40t, stroke: 170mm, max. speed: 180rpm, drive power: 18.5kW, cutting circle diameter: 400mm, max. drawing depth: 55mm, max. sheet dimensions X/Y: 1150mm/1000mm, material thickness range: 0.1mm-0.5mm, throughput: approx. 520cans/min, machine dimensions X/Y/Z: approx. 8950mm/4500mm/3900mm. An on-site inspection is possible. Kdjdpfx Ahjy Ndf As Eet

Condition: ready for operation (used), Year of construction: 1968, A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible. Kdedpfx Aoy Ndfish Ejt

Year of construction: 2011, condition: ready for operation (used), 2 complete precision press systems are offered. Press force: 220kN, stroke: 100/12mm, operating pressure: 3/6bar, tool holder X/Y: approx. 350mm/300mm, safety distance: 355mm, overrun time: 0.07s, control system SCHMIDT PressControl 500: control type: PRC 500, incl. operating panel with display and keypad, two-hand control according to EN 574 Type III B. Accessories: machine frame with integrated safety device BGR 500 inspection, machine weight: 800kg, inspection possible by arrangement. Kedpoy S A I Ujfx Ah Esdt

Condition: ready for operation (used), Year of construction: 1968, A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible. Kjdpfjy Ndfpox Ah Ejdt

Year of construction: 2026, condition: new, Messan P07 - Pneumatic press for hole punching in reinforcement sheet iron Kdjdpszugwcefx Ah Est - Working system - pneumatic - Opens holes for handle and lock holes - Punching molds are changeable - Maximum thickness of the sheet iron 1.50 mm - Option - special mould for different forms

Condition: excellent (used), Year of manufacture: 2007 The set includes: 1. Pneumatic press Manufacturer: Schmidt Type: 24 Pressing force: 9 kN Kjdpfx Asx Eiuxeh Ejdt Two-hand control (two-hand release) 2. Strip guide for stamping / embossing Manufacturer: SAEP Type: HSG 3. Control system Manufacturer: Siemens Type: Simatic Panel 4. Additional equipment Magnifying lamp Worktable Ergonomic safety work chair

Year of construction: 2011, condition: excellent (used), 2 pneumatic shelf presses for edging and veneering. Type PNP Working area: 1250x2500 mm Kdedpfx Ahey Avb Ao Eot Weight: 1940 kg Presses are fully operational and in use. For any questions, please contact: Piotr Żołnierczyk - 606 666 023

Condition: used, Table size: 660 x 450 mm Stroke length: 520 mm Kdjdpfx Aoq U Rbfoh Ejt

Condition: good (used), Year of construction: 1999, machine/vehicle number: 165236.1, Offer 25418 Technical data: - Pressing force approx. 110 kN - Working stroke approx. 50 mm - Force stroke 12 mm - Overhang approx. 150 mm - Table size 280 x 180 mm Kdsdpfezfh Hyjx Ah Eot - Adjustable installation height up to max. 300 mm - 2 manual controls - Air inlet 6 - 8 bar - Total space requirement approx. W 600 x H 2500 x D 900 mm - Weight approx. 400 kg