Used other metal presses for sale (146)

Year of construction: 2015, operating hours: 20,652 h, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: S7-300 PLC, overall weight: 10,500 kg, total width: 2,405 mm, total height: 3,029 mm, pressing force: 357 t, table length: 1,290 mm, table width: 1,200 mm, Hydraulic press manufactured in 2015. This WINTER VSP 350 features a holding force of 3500 kN and a trimming force of 2500 kN. It offers a holding stroke of 50 mm and a trimming stroke of 100 mm, ensuring efficient operation. With a robust table size of 1290 x 1200 mm, this machine is designed for heavy-duty tasks. If you are looking to get high-quality pressing capabilities, consider the WINTER VSP 350 hydraulic press we have for sale. Contact us for further details. MACHINE • Holding Stroke: 50 mm • Holding Speed at 500 kN: approx. 30 mm/s • Holding Speed at 3500 kN: approx. 4 mm/s • Holding Return Speed: 60 mm/s • Trimming Force: 2500 kN • Trimming Stroke: 100 mm • Trimming Speed at 500 kN: approx. 30 mm/s • Trimming Speed at 2500 kN: approx. 5 mm/s • Trimming Return Speed: 60 mm/s • Impact Damping Stroke: 20 mm • Opening Width: 1000 mm Bdodpoz H Ivzjfx Amreh • Machine Depth: 1230 mmHYDRAULIC UNIT • Hydraulic Unit Weight: 13000 kg • Pump Power: 2 × 15 kW • Cooler Power: 3 kW • Pump Unit Power: 3 kW • Hydraulic Pipe Diameter: 2 × Ø38 × 4 mm • Hydraulic Pipe Diameter: 2 × Ø30 × 4 mm • Hydraulic Pipe Diameter: 1 × Ø20 × 3 mm • Colour Hydraulic Unit: RAL7004 • Rated Voltage: 400 V • Frequency: 50 Hz • Rated Current: 97 A • Installed Power: 36 kW • Operating Hours Hydraulic Unit 1: 20652.8 h • Operating Hours Hydraulic Unit 2: 20641.8 h • Operating Hours Hydraulic Unit 3: 20802.8 h

Year of construction: 2018, condition: ready for operation (used), overall weight: 4,100 kg, total width: 1,810 mm, total height: 2,780 mm, pressing force: 76 t, product length (max.): 7,060 mm, stroke length: 160 mm, Metal press manufactured in 2018. This Dunkes HR75 features a nominal straightening force of 750 kN and a maximum ram stroke of 160 mm. The machine has a usable shaft length of 3000 mm and a throat depth of 250 mm. If you are looking to get high-quality straightening capabilities, consider the Dunkes HR75 machine we have for sale. Contact us for further details. - Max. Installation Height: 885 mm- Min. Installation Height: 725 mm- Throat Depth: 250 mm- Ram Speed "DOWN": 2 - 30 mm/s- Ram Speed "UP": 15 - 68 mm/s- Press Table Height above Floor (with / without oil pan): 730 / 700 mm- Usable Shaft Length: 3000 mm- Usable Shaft Diameter: ø 120 / ø 170 mm- Straightening Bridge Length: 2000 mm- Extension Bed Extension: 2 x (1010 + 1520 mm) / Attached tables 2.5 m length each- Main Pump Drive Power: 7.5 kW- Network Type: L1-3/N/PE (TN-S)- Frequency: 50 Hz- Operating Voltage: 400 V~- Connected Load: 9 kVA- Nominal Current: 14.5 A- Supply Line / Fuse: 32 A CEE / 32 A- Hydraulic Tank Capacity: approx. 280 Liters- Weight (without tools and additional equipment, without hydraulic oil): approx. 4100 kg- Emission Sound Pressure Level Lpa: 78.5 dB(A)- Uncertainty Kpa: 8 dB(A) Bdodsz E Igwopfx Amroh

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Bodpfx Aozb Il Nemredh Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: good (used), functionality: fully functional, Parker Parkrimp II 83 CE crimping machine for high-pressure hoses (hydraulic hoses) Crimping force: 125t (at max. 5,000 PSI) Suitable for the following fitting series: 43, 71, 77, 25, 26, 81, HY series (611HT, 801, 836) The following crimping dies are included: 5/16" Purple 80C B05 & A05 3/8" Yellow 80C A06 5/8" Orange 80C B10 & A10 1/4" Red 80C B04 & A04 3/4" Green 80C A12 & B12 & C12 & 12 (78) 1/2" Blue 80C A08 & B08 1" Black 80C A16 & B16 & C16 & 16 (78) Bdedpjv Rnnlsfx Amrsh 1 1/4" White 80C A20 (2 pcs) & C20 2" Red C24 Weight: 450 kg #8247

Year of construction: 1992, condition: used, Pressing force 40 t Effective stroke 500 mm power capacity 17 kW tracking travel 48 mm Overrun time 110 ms safety distance 176 mm Condition: used Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional Bsdpezdvcajfx Amrjdh information. Subject to changes, errors in technical data and specifications, and prior sale!

Year of construction: 1980, condition: ready for operation (used), The pressure relief valve is defective (pressure gauge). Bdjdjz Abxdjpfx Amrjh

Year of construction: 2000, condition: good (used), functionality: fully functional, machine/vehicle number: MF25-26, Corner Former MF 25-26 – Hydraulic, Year of Manufacture 2000 For sale is a used, robust corner former (Eckenformer) of the type MF 25-26, ideal for precise processing of sheet metal edges and corners in metalworking applications. Technical data: Type: Corner Former MF 25-26 Year of manufacture: 2000 Voltage: 400 V / 50–60 Hz Power: 2.5 kW Hydraulic pressure: 150 bar Tank capacity: 40 liters Weight: approx. 500 kg Manufacturer: ACF Engineering & Automation GmbH, Austria Bdsdoy D A Ekjpfx Amrsh Description: The machine is in used, fully functional condition. It is perfectly suited for industrial sheet metal processing, especially for forming and finishing corners. Thanks to its hydraulic design, it enables consistent and powerful operation. The compact construction and solid build ensure high stability and long-term reliability in production environments. Key features: - Heavy-duty industrial design - High operating pressure for precise results - Easy integration into existing production lines Condition: used, ready for operation (see photos)

Year of construction: 2018, operating hours: 2,154 h, condition: ready for operation (used), overall weight: 11,000 kg, total width: 1,850 mm, total height: 2,890 mm, pressing force: 204 t, product length (max.): 3,580 mm, stroke length: 260 mm, Hydraulic press manufactured in 2018. This Baykal APHS 31200 features a press force of 200 t and a bending length of 3,100 mm. With a maximum stroke of approximately 260 mm, it is designed for efficient bending operations. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 31200 hydraulic press we have for sale. Contact us for further details. • Hydraulic pressure: approx. 276 bar • Nominal power: approx. 15.3 kW • Power supply: 400 V / 50 Hz / 3 Ph • Production hours: 2,154 h Additional equipment • Included tooling: • V16 H80 mm: 10 / 15 / 20 / 40 / 50 / 100 / 200 / 370 / 835 ×2 mm • V50 H60 mm: 10 / 15 / 20 / 40 / 50 / 100 / 200 / 370 / 835 ×3 mm • V12 H80 mm: 10 ×2 / 15 / 20 / 195 / 285 / 295 / 835 ×3 mm • V80 H80 mm: 835 ×3 mm • V16 / V22 / V32 / V50: 10 / 15 / 20 / 40 / 50 / 100 / 200 / 370 / 835 ×3 mm • Additional tooling information: • ID 1177 – Standard – 85° – Height 65.50 mm – Radius 3.00 mm • ID 1271 – Standard – 60° – Height 115.00 mm – Radius 0.80 mm • ID 1284 – Standard – 60° – Height 135.00 mm – Radius 0.80 mm • TS-10.516 – Standard – 60° – Height 85.00 mm – Radius 0.80 mm Technical Specification Bending Length 3100 mm Bdodpfx Aez Hl Iuemrsh

Year of construction: 1987, condition: used, Control: Cybelec DNC 600S. Inspection by appointment possible. Bdsdpfsz Dkkcox Amroh

Condition: used, Year of construction: 1999, 5-STATION HYDRAULIC PRESS, FISCHER PRESSURE: 5 x 80 tons TABLE DIMENSIONS: 800 x 560 mm Bsdez A Aw Eepfx Amrsdh STROKE LENGTH: 500 mm

Year of construction: 1988, condition: used, functionality: unexamined, machine/vehicle number: Maschinen-Nr. 9371, Moros press, 30 kW connection, bale size 40x40 cm. Rexroth hydraulics, hydraulic cylinder – new, seals – new, hydraulic oil/filter – new, electrics – new. Bdodpfxeyknzpo Amreh

Condition: used, There are three May MKN1-100/6 toggle-type presses available, ram stroke: 60mm, pressing force: 100t, ram strokes: 60/min, flywheel speed: 620rpm, distance between bolster plate and ram, stroke at bottom/adjustment at top: 265mm, ram adjustment: 30mm, table surface: 640x404mm, ram surface diameter: 300mm, drive power: 5.5kW, operating voltage: 3~/380V, frequency: 50Hz, control voltage: 220V, lighting voltage: 220V, rated current: 17A, supply fuse: 25A, overhaul: 1984, an on-site inspection is possible. Bdjdpfx Aez D Hzdomrsh

Year of construction: 2014, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC Panel (OP3RL), pressing force: 51 t, Hydraulic press manufactured in 2014. This WIS ATEVI Druckgeber ATeVi Heidel features a ram stroke of 800 mm and a closing force of 500 kN. It has a machine weight of 19,500 kg and includes a Siemens S7 control system. If you are looking to get high-quality hydraulic pressing capabilities, consider the WIS ATEVI Druckgeber ATeVi Heidel machine we have for sale. Contact us for further details. - Dimensions (WxDxH): 5000 x 1740 x 5255 mm- Installation Opening (WxDxH): 2450 x 1200 x 1700 mm- Machine Weight: 19500 kg- Tool Weight: 8400 kg- Closing Force: 500 kN- Opening Force: 250 kN- Ram Stroke: 800 mm- Control System: Siemens S7 / Siemens SIMATIC Panel (OP3RL)- Power Consumption: 43 kW- Operating Voltage: 3 / N / PE AC 60 Hz 440 V- Frequency: 50 Hz- Control Voltage: 24V DC- Rated Current: 59 A- Fuse: 63 A- Additional Equipment: Funke Oil/Air Cooling Unit, hydraulic hose assemblies, remote control unit Bdsdpfx Aszxgqdomroh

Year of construction: 2008, operating hours: 2,250 h, condition: ready for operation (used), overall weight: 15,100 kg, total width: 4,050 mm, total height: 1,655 mm, pressing force: 163 t, product length (max.): 2,630 mm, stroke length: 150 mm, This Dunkes HZS 160 Bending machine was manufactured in the year 2008 and has 2250 production hours. The machine is in good condition and well maintained. • Installation height – max. 400 mm • Speed – Partial load: 36 mm/s; maximum pressing force: 12 mm/s Bdsdpfx Amsyzf A Tjrjh • Drive power: Main motor: 22 kW; Auxiliary motor: 2.2 kW • Condition of the hydraulic system: no problems or leaks

Condition: excellent (used), Here, we offer a TOX pressing machine, specifically the TOX-C bracket press. TOX Pressotechnik pressing machine, TOX-C bracket press. Pneumohydraulic manual workstation with process monitoring for pressing in functional elements. Technical data: Bodpfx Amszd Rhksrsdh Press type: EMB 030.068.Α.001 Drive: KWE3O.0O.17O.10H Pneumatic connection: G3/4'' Compressed air treatment: Filtered and dried compressed air, max. particle size 40 µm Air pressure during working process: Pmin. = 3.0 bar, Pmax. = 6.0 bar Pressing force: 170 kN Total stroke / return stroke: 170 mm / 10 mm Control: STE 326-366-3/4"-90-230V/AC special, complete Electrical connection: 90-230V/AC Ambient temperature during operation: Tmin. = 10°C, Tmax. = 60°C TOX pressing monitoring: EPW 500FP, force/travel measurement Holding device: ZHE for TOX press Dimensions: Width 1917.5 mm, Height 2506 mm, Depth 1917.5 mm Protective grid system: Leuze B20/B21 light curtain Pressing tool: See (pictures 15 to 18) Pressing sleeve (picture 17): 24.5 ∅ mm Application area, use: Pressing Weight: 2200 kg Type: EMB 030.068.A.001 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Year of construction: 1968, condition: ready for operation (used), pressing force: 306 t, stroke length: 400 mm, Hydraulic 4-Column Press manufactured in 1968. This Müller SE 300-25.1.1 is designed for metal pressing applications, featuring a stopping time of 89 ms and a stopping distance of 75 mm. If you are looking to get high-quality metal forming capabilities, consider the Müller SE 300-25.1.1 machine we have for sale. Contact us for further details. Bjdpfx Amozzv Tasrjdh • Machine Type: Hydraulic 4-Column Press • Application Type: Metal Press / Forming Press • Stopping Time: 89 ms • Stopping Distance: 75 mm • Safety Distance: 160 mmA valve is missing from the upper sectionThe thread on a cylinder tube is defective

Year of construction: 2018, operating hours: 7,062 h, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: Simatic HMI, overall weight: 50,000 kg, total height: 4,900 mm, pressing force: 459 t, table length: 1,000 mm, table width: 1,800 mm, This Sangiacomo T.450 RCE Bending machine was manufactured in the year 2018 in Italy and has 7062 production hours. It is equipped with a Siemens Simatic HMI control unit. The machine has a pressing force of 4500 kN, is in excellent condition, and has low hours. Machine Benefits Qualitative Machine Benefits • Excellent condition, low hours. Technical Machine Benefits • Ram size 900x1400 mm • Adjustable stroke 22-250 mm • Ram adjustment 120 mm • Max. Die surface 900x1650 mm • Max. Upper die weight 900 kg Dimensions Machine Depth 3100 mm Bdsdpfez D Emfex Amreh

Year of construction: 1986, condition: used, COFMO Press KD2330 Manufacturer COFMO Type Eccentric Mechanical Press Industrial Applications Stamping, punching, cold forming, and sheet metal processing in production workshops. Bsdpfxsxlcxke Amrsdh Main Technical Specifications: - Nominal Force: 101.97 tons (1,000,000 N) - Model: KD2330 - Year: 1986 - Strokes per minute: 95 - Slide Adjustment: 100 mm - Working Voltage: 220 – 380 V - Air Pressure Requirement: 5 atm - Weight: 8,000 kg 🧩 Machine Usage The COFMO KD2330 102-ton press is designed for intensive sheet metal operations such as stamping and forming. It is ideal for high-speed, high-force applications in industries like metalworking, automotive parts manufacturing, and tooling. ⚙️ Features / Differentiators With its 95 strokes per minute and nearly 102 tons of force, this machine combines speed and power. The dual-voltage compatibility (220/380V) and pneumatic system make it highly adaptable for various industrial setups. Strength: 101.97T Strokes/min: 95 Weight: 8000Kg

Year of construction: 1985, condition: used, Max. pressing force: 150t, bending length: 4050mm, backgauge: 750mm, control: Cybelec CNC 7200 P, weight: approx. 15t. Equipped with hydraulic tool clamping, crowning system, height-programmable backgauge, two control panels and two pneumatic bending aids. Including stand with various upper tools and dies as well as various special accessories manufactured in-house. Documentation available. An on-site inspection is possible. Bdodpfx Amezx Ehbjrsh

Year of construction: 2005, condition: ready for operation (used), overall weight: 9,500 kg, total width: 1,700 mm, total height: 2,300 mm, pressing force: 102 t, product length (max.): 3,800 mm, number of axes: 8, CNC Hydraulic Press Brake manufactured in 2005. This GASPARINI X-Press 100 features a press force of 100 t and a bending length of 3,100 mm. It is equipped with a Delem DA60 control and a dynamic hydraulic crowning system for enhanced precision. If you are looking to get high-quality bending capabilities, consider the GASPARINI X-Press 100 machine we have for sale. Contact us for further details regarding this machine. • Ram stroke: 300 mm • Tool clamping: Promotec pneumatic system • Hydraulic crowning: Dynamic hydraulic crowning of the lower table • Axes: Y1, Y2, X, R, Z1, Z2, X1, X2 (8 axes) • Oil seals: Replaced Bdjdpfezypi Ejx Amreh • Oil: New • Warranty: Included • Condition: Machine guaranteed / ready for sale Technical Specification Bending Length 3100 mm

Year of construction: 1995, condition: ready for operation (used), overall weight: 52,000 kg, total width: 5,100 mm, total height: 5,170 mm, pressing force: 204 t, product length (max.): 1,750 mm, table length: 800 mm, table width: 3,800 mm, Hydraulic press manufactured in 1995. This EXNER EX SBR 200 features a pressing force of 2000 kN and a drive power of 78 kW. With an oil capacity of 1400 liters and a weight of 52000 kg, this machine is designed for robust performance. If you are looking to get high-quality pressing capabilities, consider the EXNER EX SBR 200 hydraulic press we have for sale. Contact us for further details. Bjdpfx Amezxz Spsrjdh - Pressing Force: 2000 kN- Drive Power: 78 kW- Overtravel Distance: 56 mm- Safety Distance: 235 mm- Overtravel Time: 147 ms- Max. Ram Stroke: 700 mm- Distance Between Columns: 3830 mm- Installation Height: 1200 mm- Ram Diameter: 240 mm- Number of Ram Cylinders: 2- Table Bed Depth: 800 mm- Table Bed Width: 3800 mm- Clamping Plate Thickness: 150 mm- T-Slots Configuration: 8 slots, 28 mm slot width, 650 mm spacing- Total Connected Load: 90 kVA- Total Power Requirement: 77.48 kW- Voltage: 400 V- Frequency: 50 Hz- Main Motor 1 (VEM 250 M4): 55 kW, 1475 rpm- Motor 2 (VEM 132M4): 7.5 kW, 1435 rpm- Motor 3 (VEM 100Lx4): 3 kW, 1430 rpm- Motor 4 (VEM 132S4): 5.5 kW, 1440 rpm- Motor 5 (VEM 132S4): 5.5 kW, 1440 rpm- Motor 6 (ZG1KMR63G4 VEM): 0.37 kW, 40 rpm- Oil Cooler Motor (Oiltec TB/33-6): 0.55 kW, 1000 rpm- Lubrication Pump Motor (Woerner GMA-B): 0.06 kW- Press Oil Tank Capacity: 1400 liters (ISO VG 46)- Hand Lubrication Pump Capacity: 1.5 liters (Shell Alvania EP2)- Motor Lubrication Pump Capacity: 2 liters

Condition: used, Year of construction: 1998, Press force: 3500 t Stroke: 900 mm Frame width: 3200 mm Side frame opening: 2200 mm Shut height (stroke up): 1700 mm Table area: 3150 x 2150 mm Table height above floor: 500 mm Ram area: 3150 x 2400 mm Downstroke speed: 400 mm/s Bdsdpfozypa Rex Amreh Upstroke speed: 210 mm/s

Year of construction: 1998, condition: ready for operation (used), pressing force: 102 t, number of axes: 4, This 4-axis Warcom UNICA 100-40 hydraulic press was manufactured in 1998. It features a press force of 100 t and a bending length of 4,000 mm, making it suitable for various bending applications. The machine is equipped with a Promecam tooling system and ESA S530 CNC control. If you are looking to get high-quality bending capabilities, consider the Warcom UNICA 100-40 machine we have for sale. Contact us for further details. • Tool clamping/tooling system: Promecam • CNC control: ESA S530 • Condition: Overhauled/revised, ready for operation Bdjdpezypubsfx Amreh Additional equipment • Laser Safe safety system Technical Specification Bending Length 4000 mm

Year of construction: 2005, condition: used, Working length: 3100mm, pressing force: 2500kN, max. stroke: 465mm, rapid down speed: 190mm/s, working speed: 10mm/s, rapid return speed: 150mm/s, machine weight: 18t. Machine control retrofitted to Cybelec approx. 5 years ago. Safety control completely renewed in July 2026, new Siemens components installed in the control cabinet. Inspection possible by arrangement. Bdjdpfxezun T Se Amrsh

Condition: used, Year of construction: 1975, Press brake manufactured by FISCHER, model HAKS 10/3200. Pressing force approximately 100 tons. Year of manufacture 1975. Brief summary provided – a full technical translation will follow if required for this lot. Bedpfxezymazs Amredh