Condition: good (used), 1 used single-sided press Make: SACK & KIESSELBACH, year of construction: 1962,74 serial number 31900 Pressing force 630 t, stroke 310 mm Installation height 320 mm Working height 1200 mm Drive power 10 KW Nlodpfx Adsul U Svo Sec

Condition: used, Year of construction: 1952, Type of machine: Down-stroking press Manufacturer: SACK&KIESSELBACH Model: EP500 Year of construction: 1952 Pressing force: 500 t Clear gap: 450 mm Location: Nlsdpfxewxw H Ee Ad Sjc In Germany

Condition: good (used), Year of construction: 1977, 1 used eccentric press Make: Helmerding Model: EL 35 B Year of manufacture: 1977 Machine no.: 5182 Pressing force: 350 kN Adjustable stroke: 12 - 80 mm Adjustable slide: 70 mm Slide strokes per minute: 110 Adjustable table: 150 mm Safety distance: 150 mm Overrun: 50 mm Weight: 2050 kg Equipped with press safety valve Nlsdpfx Adswxxr As Ssc

Condition: used, functionality: fully functional, pressing force: 10 t, stroke length: 115 mm, table width: 470 mm, table length: 360 mm, throat depth: 190 mm, distance table to ram: 210 mm, total length: 1,470 mm, total width: 1,400 mm, total height: 1,800 mm, overall weight: 430 kg, Manual spindle press with C-frame Pressing force: 10 tons Clamping area: 470 x 360 mm Maximum installation height between table and ram: 210 mm Throat depth: 190 mm Spindle stroke: 115 mm Table bore: Ø 100 mm Pin bore: Ø 32 mm Weight: 430 kg Dimensions: Width: 1470 mm (ring diameter) Depth: 1400 mm Height (including Euro pallet): 1800 mm Year of manufacture: unknown Included accessories: - 10 pins Ø 32 mm - 2 clamping claws - 1 bending die base with adjustable micrometer stop - 4 bending punches The press has been rarely used and is therefore in very good condition. Nlodpfx Adeyzy R Ej Ssc The hand-scraped, adjustable dovetail guides are also in excellent condition. The spindle shows no signs of wear. Sale is due to impending retirement. Inspection possible during our business hours or by appointment.

Condition: used, Year of construction: 1999, functionality: fully functional, overall weight: 1,100 kg, 40 ton eccentric press MIOS, type C Njdpfsywylhex Ad Solc

Condition: used, Year of construction: 1998, machine/vehicle number: 9083432, functionality: fully functional, Pneumatic press 125 tons Nledpfx Adjyzhqyo Sjc

Condition: used, Year of construction: 1999, machine/vehicle number: 9093548, functionality: fully functional, Pneumatic press 63 tons Nsdpfx Asyzhvped Solc

Condition: good (used), Year of construction: 1999, machine/vehicle number: 165236.1, Offer 25418 Technical data: - Pressing force approx. 110 kN Nlodpfx Ajzfh Hysd Sjc - Working stroke approx. 50 mm - Force stroke 12 mm - Overhang approx. 150 mm - Table size 280 x 180 mm - Adjustable installation height up to max. 300 mm - 2 manual controls - Air inlet 6 - 8 bar - Total space requirement approx. W 600 x H 2500 x D 900 mm - Weight approx. 400 kg

Condition: ready for operation (used), Year of construction: 2012, stroke length: 250 mm, Mechanical stamping press manufactured in 2012. This Colombo Agostino T231A315 features a nominal press capacity of 315 tons and a slide stroke of 250 mm. It includes a motorized slide adjustment of 315 mm and a bed dimension of 1120 mm x 960 mm. If you are looking to get high-quality stamping capabilities, consider the Colombo Agostino T231A315 machine we have for sale. Contact us for further details. Nljdpozcywaofx Ad Sec • Main motor power: 32 kW • Stroke speed (min - max): 15 - 30 strokes/min • Slide stroke (working travel): 250 mm • Slide (ram) adjustment: 315 mm (motorized) • Shut height (max. closed die height): 650 mm • Shut height (min. closed die height): 335 mm (max. shut height minus slide adjustment) • Bed (bolster plate) dimensions: 1120 mm x 960 mm • Slide (ram) face dimensions: 1120 mm x 960 mm • Bottom cushion stroke (max): 160 mm (integrated) • Slide guidance: Precision guided ram system • Bed configuration: Fully machined bolster plate • Lubrication: Centralized automatic lubrication system Additional equipment • Feeding system: Coil/feeding line included • Optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Year of construction: 2015, operating hours: 20,652 h, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: S7-300 PLC, overall weight: 7,500 kg, total width: 2,405 mm, total height: 3,029 mm, pressing force: 357 t, table length: 1,290 mm, table width: 1,200 mm, Hydraulic press manufactured in 2015. This WINTER VSP 350 features a holding force of 3500 kN and a trimming force of 2500 kN. It offers a holding stroke of 50 mm and a trimming stroke of 100 mm, ensuring efficient operation. With a robust table size of 1290 x 1200 mm, this machine is designed for heavy-duty tasks. If you are looking to get high-quality pressing capabilities, consider the WINTER VSP 350 hydraulic press we have for sale. Contact us for further details. MACHINE • Holding Stroke: 50 mm • Holding Speed at 500 kN: approx. 30 mm/s • Holding Speed at 3500 kN: approx. 4 mm/s • Holding Return Speed: 60 mm/s • Trimming Force: 2500 kN • Trimming Stroke: 100 mm • Trimming Speed at 500 kN: approx. 30 mm/s • Trimming Speed at 2500 kN: approx. 5 mm/s • Trimming Return Speed: 60 mm/s Nlsdpfx Ajzcw I Aed Sec • Impact Damping Stroke: 20 mm • Opening Width: 1000 mm • Machine Depth: 1230 mmHYDRAULIC UNIT • Hydraulic Unit Weight: 13000 kg • Pump Power: 2 × 15 kW • Cooler Power: 3 kW • Pump Unit Power: 3 kW • Hydraulic Pipe Diameter: 2 × Ø38 × 4 mm • Hydraulic Pipe Diameter: 2 × Ø30 × 4 mm • Hydraulic Pipe Diameter: 1 × Ø20 × 3 mm • Colour Hydraulic Unit: RAL7004 • Rated Voltage: 400 V • Frequency: 50 Hz • Rated Current: 97 A • Installed Power: 36 kW • Operating Hours Hydraulic Unit 1: 20652.8 h • Operating Hours Hydraulic Unit 2: 20641.8 h • Operating Hours Hydraulic Unit 3: 20802.8 h

Condition: new, The scope of delivery includes: 1x Top tool, new Tool system: UKB system Trumpf / Wila / LVD with Simple Clamp Type: 15320-500 (15320X) Angle: 28° Radius: R 1.0 mm Length: 500 mm Width: 24 mm Height: 120 mm Load capacity: 800 kN/m max. Material: 42 CrMo4 Weight: ≈ 10 kg Internal reference: DE-KW23-26-03 Nlsdezcuqbopfx Ad Sjc Explanation: The tool is used in bending presses (also known as die-bending presses) for industrial sheet metal processing. The standardized tool holder, "Simple Clamp safety button," allows the operator to install and remove the segment vertically at any desired point of the press clamping mechanism. Note: This tool is being sold as part of a customer return (purchase date: April 2026) and is therefore offered at a reduced price. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), Description PEM Serter 4, very good condition Nlsdpfx Aozfbu Ded Soc The machine can process insertion fasteners from all manufacturers up to 53 kN (from M2 to M8 in steel and up to M6 in stainless steel). Quick tool change, ideal for small batch sizes. This machine has an additional manual QX system as special equipment, which enables quick switching between 4 different tools. The QX system is purchased separately as an accessory. The individual price is €2,000. The one-hand operation of this tool allows an operator to install four different types and/or sizes of fasteners with a single setup. The machine includes a laser pointer, stroke counter, and a robust, lockable cabinet for storing tools and accessories. Self-collection only, no delivery. If interested, please contact us.

Condition: used, Year of construction: 1978, pressure 800 t distance between columns 3010 mm stroke 300 mm distance table/ram, max. stroke up, adjustment up 1350 mm table surface area 3000 x 1800 mm table height over floor 500 mm side window 1500 x 1400 mm ram surface 3000 x 1800 mm speed down 300 mm/s oil volume 900 l height over floor 5,4 m height beneath floor 2,1 m Nsdpfx Adjvuk Ipj Solc power requirement 200,0 kW weight 80,0 t Dimensions (WxDxH) 5,2 x 2,6 x 7,5 m SPECIAL DEAL hydraulic high-speed press with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop (motoric adjustable), ram interlocking in upper position maximum stroke frequency 50/min (when using automatic feeding devices) as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: used, Year of construction: 1970, machine/vehicle number: P5063870, functionality: not functional, power: 4.05 kW (5.51 HP), input voltage: 380 V, type of input current: three-phase, pressing force: 75 t, table width: 800 mm, table length: 620 mm, table height: 740 mm, throat depth: 300 mm, distance table to ram: 450 mm, total length: 2,000 mm, total width: 1,200 mm, total height: 2,700 mm, overall weight: 4,475 kg, year of last overhaul: 2026, punching force: 75 t, compressed air connection: 8 bar, control cabinet height: 1,300 mm, control cabinet length: 350 mm, control cabinet width: 500 mm, DGUV certified until: 05/2027, drop-through hole in table: 250 mm, height adjustment type: mechanical, installation height: 450 mm, mount diameter: 40 mm, ram adjustment: 80 mm, ram bore: 40 mm, stroke adjustment: 140 mm, Stroke adjustment 16-140mm Mechanical safety guard Njdpfx Aeyv Havjd Selc Flywheel drive with reversible idler gear Overall height with raised safety guard approx. 4100mm Additional clamping plate 790x610mm with insert diameter 250x120mm Spring-loaded base

Condition: used, Year of construction: 1987, machine/vehicle number: 10064, functionality: fully functional, operating hours: 90,041 h, input voltage: 380 V, type of input current: three-phase, pressing force: 200 t, stroke length: 300 mm, table width: 800 mm, table length: 1,290 mm, table height: 1,000 mm, ram plate width: 800 mm, ram plate length: 1,300 mm, oil tank capacity: 1,300 l, total length: 2,330 mm, total width: 1,600 mm, total height: 4,150 mm, overall weight: 21,000 kg, control cabinet height: 2,070 mm, control cabinet length: 1,500 mm, control cabinet width: 400 mm, DGUV certified until: 06/2026, die cushion stroke: 70 mm, distance between side stands: 420 mm, installation height: 600 mm, Equipment: safety light barrier, 1x tool safety input Two-hand control panel with emergency stop 8x hydraulic clamps Electrically adjustable depth stop Cut stroke damping Ejector - draw cushion for ram and press table Electronic stroke and pressure measurement system Hydraulic main drive pump completely overhauled with a new drive motor Nodpfxeyvgrhs Ad Solc

Condition: good (used), Hand-operated spindle press, homemade, from a training center Pressing force: approx. 5-10 tons Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Nedpfx Adszcqmle Sjlc DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 2016, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2016. This AIDA 315/2MR/LD/TE3 features a press capacity of 315 tons and a stroke length of 250 mm. It includes a maximum die size of 2,250 × 750 mm and a maximum die weight on slide of 10,200 kg. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE3 machine we have for sale. Contact us for further details. • Main technical data: • Press capacity: 315 ton • Rated press force: 3,150 kN • Rated capacity point: 12.7 mm above BDC • Normal crankshaft stop position: TDC • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Slide speed: 15–40 strokes/min • Maximum flywheel speed: 628.5 rpm • Maximum clutch engagements: 24/min • Stopping time: 0.386 s • Safety distance: 618 mm • Die and working area: • Maximum die size: 2,250 × 750 mm • Maximum die weight on slide: 10,200 kg • Machine structure: • Frame design: double upright (straight-side) frame • Drive system: double connecting rod (double pitman) • Slide guidance: guided slide • Motion type: mechanical crank press • Slide movement: vertical reciprocating motion • Main axis movement: rotary crankshaft drive • Ram/slide adjustment: motorized • Cushion system: • Type: integrated drawing cushion • Maximum cushion force: 3,450 daN at 0.6 MPa • Auxiliary systems: • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) • Clutch & brake system: pneumatic • Lubrication system: centralized automatic lubrication • Safety system: integrated • Operator protection: included • Automation ready: yes Nodpfxezcpwie Ad Sjlc • Performance and safety highlights: • High-rigidity double-upright frame construction • Double-pitman drive for improved slide parallelism and load distribution • Pneumatic clutch-brake for reliable operation and fast stopping • Integrated safety and operator protection systems • Designed for integration with automatic feeding and transfer systems • Auxiliary systems: • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) (Included) • Clutch & brake system: pneumatic (Included) • Lubrication system: centralized automatic lubrication (Included) • Drawing cushion: integrated (Included) • Safety system: integrated (Included) • Operator protection: yes (Included) • Automation ready: yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: ready for operation (used), Year of construction: 2018, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2018. This AIDA 315/2MR/LD/TE 3 features a press capacity of 315 tons and a stroke length of 250 mm. It has a maximum die size of 2,250 × 750 mm and can accommodate a maximum die weight of 10,200 kg. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE 3 machine we have for sale. Contact us for further details regarding this machine. • Press capacity: 315 ton • Rated capacity: 3,150 kN • Rated capacity point: 12.7 mm above BDC • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Maximum die size: 2,250 × 750 mm • Maximum die weight: 10,200 kg • Flywheel speed: 628.5 rpm • Operating speed: 15–40 spm • Maximum clutch engagements: 24 per min • Stopping time: 0.386 s • Safety distance: 618 mm • Cushion force: 3,450 daN @ 0.6 MPa • Counterbalance force: 102 kN @ 6 bar • Frame type: Double upright, double-crank • Clutch/brake system: Pneumatic • Lubrication system: Centralized automatic • Slide guiding: Precision guided • Drawing cushion: Integrated • Counterbalance cylinders: Yes • Safety system: Integrated Nljdpfxjzcptwe Ad Ssc • Operator protection: Yes • Automation ready: Yes • Drawing cushion: Integrated (Included) • Counterbalance cylinders: Yes (Included) • Safety system: Integrated (Included) • Operator protection: Yes (Included) • Automation ready: Yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: ready for operation (used), Year of construction: 2013, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2013. This AIDA 315/2MR/LD/TE 3 features a press capacity of 315 tons and a stroke length of 250 mm. It is designed for high-precision stamping operations with a robust double-upright frame and integrated drawing cushion. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE 3 machine we have for sale. Contact us for further details regarding this machine. • Main technical data: Nlodozcppxspfx Ad Ssc • Press capacity: 315 Ton • Rated press force: 3,150 kN • Rated capacity point: 12.7 mm above Bottom Dead Center (BDC) • Normal crankshaft stop position: Top Dead Center (TDC) • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Slide speed: 15–40 strokes/min • Maximum flywheel speed: 628.5 rpm • Maximum clutch engagements: 24 engagements/min • Stopping time: 0.386 s • Safety distance: 618 mm • Die and working area: • Maximum die size: 2,250 × 750 mm • Maximum die weight on slide: 10,200 kg • Machine structure: • Frame design: Double upright (straight-side) frame • Drive system: Double connecting rod (double pitman) • Slide guidance: Guided slide • Motion type: Mechanical crank press • Slide movement: Vertical reciprocating motion • Main axis movement: Rotary crankshaft drive • Ram adjustment: Motorized slide adjustment • Cushion system: • Type: Integrated drawing cushion • Maximum cushion force: 3,450 daN at 0.6 MPa • Systems and safety: • Counterbalance cylinders: Yes • Counterbalance force: 102 kN at 6 bar • Clutch & brake system: Pneumatic • Lubrication system: Centralized automatic lubrication • Safety system: Integrated • Operator protection: Included • Automation ready: Yes • Performance and safety notes: • High-rigidity double-upright frame construction • Double-pitman drive for improved slide parallelism and load distribution • Pneumatic clutch-brake for reliable operation and fast stopping • Designed for integration with automatic feeding and transfer systems • Auxiliary systems: • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) (Included) • Clutch & brake system: pneumatic (Included) • Lubrication system: centralized automatic lubrication (Included) • Drawing cushion: integrated (Included) • Safety system: integrated (Included) • Operator protection: yes (Included) • Automation ready: yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: new, Sicmi PSV 70 M - Hydraulic workshop press with a servomechanical handwheel for cylinder adjustment Nodpezcphbefx Ad Selc The PSV model is particularly suitable for sheet metal straightening, inserting bushings, or sheet metal inserts. The lowering and raising of the cylinder is controlled by a handwheel with a servomechanism, which allows for adjustment of the cylinder position to within hundredths of a millimeter, thus ensuring absolute precision. The cylinder stroke is 350 mm and exerts a maximum pressure of 270 bar. Since the approach speed of the cylinder is 10 mm/s or less, the operator can operate the electro-hydraulic press with only one hand. The platform is mobile, and its vertical movement is achieved using the main cylinder, which simplifies sheet metal processing and pressing operations. The hydraulic workshop press with a servomechanical handwheel is also available in a version with a transverse cylinder, which allows for transverse movement of the main cylinder using a handwheel. This solution therefore allows you to always work in the center of the cylinder axis, avoiding processes that could damage the hydraulic press. Correct positioning and locking of the cylinder in the desired position is ensured by a specially designed system. The frame of the PSV hydraulic workshop press is made of an extremely rigid, electro-welded steel construction, which has been specially developed to ensure maximum robustness and stability. Optional equipment: System for preventing cylinder rod torsion Support plates Pair of V-shaped prisms

Condition: used, Year of construction: 1967, total length: 2,000 mm, total width: 1,750 mm, total height: 2,850 mm, Colour: Grey Nodpfex N Sxdox Ad Selc Empty weight: 6.000 kg - Year: 1967 - Documentation available: No - CE certificate present: No - Serial number: 1166 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 250 - Table length [mm]: 740 - Table width [mm]: 500 - Ram length [mm]: 250 - Throat depth [mm]: 350 - Transport dimensions: 2000mm x 1750mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, pressure 110 t throat 290 mm stroke 20-124 mm no. of strokes 60 / 90 Hub/min ram adjustment 85 mm table surface area ca. 920 x 590 mm ram surface ca. 530 x 280 mm distance table to upper part of the press ca. 450 mm hole in the table ca. 180 x 300 mm mm table height ca. 750 mm tool hole in ram Ø 50 mm Number of working hours 8214 h distance table to upper part of the press mm weight of the machine ca. 5,5 t dimensions ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new press safety control. Operating hours read since overhaul in 2014: 8214 Nlodpfot Ei Hnsx Ad Sec Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control

Year of construction: 1980, operating hours: 7,663 h, condition: used, pressure 320 t throat 800 mm Nledpfxsd Ih Nro Ad Ssc stroke 630 mm distance between table / ram max. 1000 mm ram head dimension 710 x 600 mm table-size 800 x 1200 mm work height max. 1015 mm quantity of oil 1100 l Number of working hours 7663 h weight of the machine ca. 15 t dimensions ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available.

Year of construction: 1978, condition: used, pressure 2000 /1000* t distance between columns 2650 mm stroke 500 mm column travel -side 500 x 1000 mm diameter of piston 710 mm number of pistons 2 distance between table / ram 1000 mm operating pressure 130 / 230 bar dayligth 800 mm table length 2500 mm table width 1600 mm table height 250 mm draw back pressure 500 kN number of T-slots 8 turning speeds 1500 U/min rapid speed 120 - 140 mm/min closing speed max. 120 - 140 mm/sec. return of plunger by small single cylinders 100 - 110 mm/sec hydraulical ram locking cutting sound absorber 300 t die cushion capacity 200 t die cushion stroke 250 mm speed of die cushion 100 mm/sec frequency 50 Hz voltage 380 V quantity of oil 2000 l total power requirement 93 kW weight of the machine ca. 100 t dimensions of the machine ca. 5000 x 2500 x 7200 mm transport measurements ca. 6500 x 3750 x 2190 mm Nlsdpsd Ih Ncjfx Ad Soc 1991 assembly of a die cushion, pressure reduction to 1000 tons reason: tools were only constructed to 1000 tons press has run in a perfect condition until disassembly. It was replaced by a press line. important for UVV: press has a hydraulic ram locking!

Condition: used, pressure 200 t distance between columns 1600 mm max. ram stroke 600 mm dayligth 900 mm table width 1600 mm table depth 1300 mm table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 rapid traverse 400 mm/s return speed 325 mm/s pressing speed 42 mm/s bei 40% mm/sec pressing speed 20 mm/s bei 100% mm/sec die-cushion pressure 800 kN die cushion stroke 150 mm Nlodjg S R Twspfx Ad Sec speed of die cushion auf 68/ ab 225 mm/s